scholarly journals Physical and Mechanical Properties of Fast Growing Polyploid Acacia Hybrids (A. auriculiformis × A. mangium) from Vietnam

Forests ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 717
Author(s):  
Dang Duc Viet ◽  
Te Ma ◽  
Tetsuya Inagaki ◽  
Nguyen Tu Kim ◽  
Nghiem Quynh Chi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Young’S Modulus ◽  
Equilibrium Moisture Content ◽  
Compression Strength ◽  
Young's Modulus ◽  
Basic Density ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Acacia Auriculiformis

Acacia plants are globally important resources in the wood industry, but particularly in Southeast Asian countries. In the present study, we compared the physical and mechanical properties of polyploid Acacia (3x and 4x) clones with those of diploid (2x) clones grown in Vietnam. We randomly selected 29 trees aged 3.8 years from different taxa for investigation. BV10 and BV16 clones represented the diploid controls; X101 and X102 were the triploid clones; and AA-4x, AM-4x, and AH-4x represented neo-tetraploid families of Acacia auriculiformis, Acacia mangium, and their hybrid clones. The following metrics were measured in each plant: stem height levels, basic density, air-dry equilibrium moisture content, modulus of rupture (MOR), modulus of elasticity (MOE), compression strength, and Young’s modulus. We found that the equilibrium moisture content significantly differed among clones, and basic density varied from pith-to-bark and in an axial direction. In addition, the basic density of AA-4x was significantly higher than that of the control clones. Furthermore, the MOR of AM-4x was considerably lower than the control clones, whereas the MOE of X101 was significantly higher than the control values. The compression strength of AM-4x was significantly lower than that of the control clones, but AH-4x had a significantly higher Young’s modulus. Our results suggest that polyploid Acacia hybrids have the potential to be alternative species for providing wood with improved properties to the forestry sector of Vietnam. Furthermore, the significant differences among the clones indicate that opportunities exist for selection and the improvement of wood quality via selective breeding for specific properties.

scholarly journals The classical mechanics engineered of Bambusa vulgaris and Schizostachyum brachycladum

2021 ◽  
Vol 6 (2) ◽  
pp. 57-61
Author(s):  
Mohamad Saiful Sulaiman ◽  
Sitti Fatimah Mhd. Ramle ◽  
Rokiah Hashim ◽  
Othman Sulaiman ◽  
Mohd Hazim Mohamad Amini ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Water Absorption ◽  
Classical Mechanics ◽  
Basic Density ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Flexural Test ◽  
Thickness Swelling ◽  
Bambusa Vulgaris

Physical and mechanical properties of Bambusa vulgaris and Schizostachyum brachycladum wereinvestigated. The sample were classified into two different ages which are young and mature foreach culm of bamboo. The aim of this study to investigate the physical properties such as density,basic density, moisture content, water absorption and thickness swelling. Other than that, themechanical properties also help to determine their flexural test for modulus of rupture (MOR) andmodulus of elasticity (MOE). The method used to analyse physical and mechanical properties werefollowing the ISO standard. From this study, young Bambusa vulgaris has indicated the highercontent of moisture content, water absorption and thickness swelling with 67.66%, 2.69% and34.03%, respectively while mature Schizostachyum brachycladum has shown the higher value inbasic density, density, and flexural test for MOR and MOE with 876.33 kg/m3, 1084.49 kg/m3, 317.01 N/mm2 and 122986.18 N/mm2, respectively.

Effect of Castor Oil Impregnation on the Physical and Mechanical Properties of Bacterial Cellulose

2012 ◽  
Vol 3 (1) ◽  
pp. 13-26
Author(s):  
Myrtha Karina ◽  
Lucia Indrarti ◽  
Rike Yudianti ◽  
Indriyati
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Bacterial Cellulose ◽  
Young’S Modulus ◽  
Castor Oil ◽  
Young's Modulus ◽  
Physical And Mechanical Properties ◽  
Scanning Electron Micrographs ◽  
Elongation At Break ◽  
Acetone Water

The effect of castor oil on the physical and mechanical properties of bacterial cellulose is described. Bacterial cellulose (BC) was impregnated with 0.5–2% (w/v) castor oil (CO) in acetone–water, providing BCCO films. Scanning electron micrographs revealed that the castor oil penetrated the pores of the bacterial cellulose, resulting in a smoother morphology and enhanced hydrophilicity. Castor oil caused a slight change in crystallinity indices and resulted in reduced tensile strength and Young's modulus but increased elongation at break. A significant reduction in tensile strength and Young's modulus was achieved in BCCO films with 2% castor oil, and there was an improvement in elongation at break and hydrophilicity. Impregnation with castor oil, a biodegradable and safe plasticiser, resulted in less rigid and more ductile composites.

scholarly journals Physical and mechanical rock properties of a heterogeneous volcano; the case of Mount Unzen, Japan

2020 ◽  
Author(s):  
Jackie E. Kendrick ◽  
Lauren N. Schaefer ◽  
Jenny Schauroth ◽  
Andrew F. Bell ◽  
Oliver D. Lamb ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Acoustic Emission ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Physical And Mechanical Properties ◽  
B Value ◽  
Coda Wave ◽  
Damage Accrual ◽  
The Impact

Abstract. Volcanoes represent one of the most critical geological settings for hazard modelling due to their propensity to both unpredictably erupt and collapse, even in times of quiescence. Volcanoes are heterogeneous at multiple scales, from porosity which is variably distributed and frequently anisotropic to strata that are laterally discontinuous and commonly pierced by fractures and faults. Due to variable and, at times, intense stress and strain conditions during and post-emplacement, volcanic rocks span an exceptionally wide range of physical and mechanical properties. Understanding the constituent materials' attributes is key to improving the interpretation of hazards posed by the diverse array of volcanic complexes. Here, we examine the spectrum of physical and mechanical properties presented by a single dome-forming eruption at a dacitic volcano, Mount Unzen (Japan) by testing a number of isotropic and anisotropic lavas in tension and compression and using monitored acoustic emission (AE) analysis. The lava dome was erupted as a series of 13 lobes between 1991–1995, and its ongoing instability means much of the volcano and its surroundings remain within an exclusion zone today. During a field campaign in 2015, we selected 4 representative blocks as the focus of this study. The core samples from each block span range in porosity from 9.14 to 42.81 %, and permeability ranges from 1.54 × 10−14 to 2.67 × 10−10 m2 (from 1065 measurements). For a given porosity, sample permeability varies by > 2 orders of magnitude is lower for macroscopically anisotropic samples than isotropic samples of similar porosity. An additional 379 permeability measurements on planar block surfaces ranged from 1.90 × 10−15 to 2.58 × 10−12 m2, with a single block having higher standard deviation and coefficient of variation than a single core. Permeability under confined conditions showed that the lowest permeability samples, whose porosity largely comprises microfractures, are most sensitive to effective pressure. The permeability measurements highlight the importance of both scale and confinement conditions in the description of permeability. The uniaxial compressive strength (UCS) ranges from 13.48 to 47.80 MPa, and tensile strength (UTS) using the Brazilian disc method ranges from 1.30 to 3.70 MPa, with crack-dominated lavas being weaker than vesicle-dominated materials of equivalent porosity. UCS is lower in saturated conditions, whilst the impact of saturation on UTS is variable. UCS is between 6.8 and 17.3 times higher than UTS, with anisotropic samples forming each end member. The Young's modulus of dry samples ranges from 4.49 to 21.59 GPa and is systematically reduced in water-saturated tests. The interrelation of porosity, UCS, UTS and Young's modulus was modelled with good replication of the data. Acceleration of monitored acoustic emission (AE) rates during deformation was assessed by fitting Poisson point process models in a Bayesian framework. An exponential acceleration model closely replicated the tensile strength tests, whilst compressive tests tended to have relatively high early rates of AEs, suggesting failure forecast may be more accurate in tensile regimes, though with shorter warning times. The Gutenberg-Richter b-value has a negative correlation with connected porosity for both UCS and UTS tests which we attribute to different stress intensities caused by differing pore networks. b-value is higher for UTS than UCS, and typically decreases (positive Δb) during tests, with the exception of cataclastic samples in compression. Δb correlates positively with connected porosity in compression, and negatively in tension. Δb using a fixed sampling length may be a more useful metric for monitoring changes in activity at volcanoes than b-value with an arbitrary starting point. Using coda wave interferometry (CWI) we identify velocity reductions during mechanical testing in compression and tension, the magnitude of which is greater in more porous samples in UTS but independent of porosity in UCS, and which scales to both b-value and Δb. Yet, saturation obscures velocity changes caused by evolving material properties, which could mask damage accrual or source migration in water-rich environments such as volcanoes. The results of this study highlight that heterogeneity and anisotropy within a single system not only add uncertainty but also have a defining role in the channelling of fluid flow and localisation of strain that dictate a volcano's hazards and the geophysical indicators we use to interpret them.

scholarly journals SIFAT FISIK DAN MEKANIK KAYU SALAM (Syzygium polyanthum (Wight)Walp.) BERDASARKAN POSISI KETINGGIAN PADA BATANG

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
. Erma ◽  
Fadiilah H Usman ◽  
. Muflihati
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Average Height ◽  
Class Iii ◽  
Lightweight Construction ◽  
Brown Colour ◽  
Wood Demand ◽  
Selection Of

Physical and mechanical properties of wood is one of the basic properties that need to be known in the selection of wood, because the physical and mechanical properties of wood are not the same height on the stem. Increased wood demand gives the opportunity to use wood that is not yet known for its marketing, one of which is Salam wood (Syzygium polianthum (Wight) Walp). The purpose of this research was to determine the physical and mechanical properties of Salam wood based on the height of the stem so that Salam wood can be optimally utilized by testing based on Classification SNI – 5 PKKI 1961. Methods of making test and test examples based on British Standard Methods No. 373-1957. The results showed that Salam wood has physical properties with an average  brown colour, the moisture content 3,13 % , density  0,58 kg/cm2 , Depreciation 2,59 %. Salam has mechanical properties with an average height position stem from base to tip with Modulus of Elastiscity (MOE)  97.701,54 , Modulus of Rupture (MOR) 659,18  and  Modulus Crushing  Streang 342,86 . Salam can be classified into strong class III and based on its properties and mechanics, it is suitable for use as a lightweight construction and furniture.Keywords: Density, depreciation, MCS, MOE, moisture content, MOR

scholarly journals KUALITAS PAPAN KOMPOSIT LIMBAH KULIT BATANG SAGU (Metroxylon sp) DAN PLASTIK POLIPROPILENA BERDASARKAN JUMLAH LAPISAN PENYUSUN

2018 ◽  
Vol 7 (1) ◽  
Author(s):  
Mayang Archila ◽  
Farah Diba ◽  
Dina Setyawati ◽  
. Nurhaida
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Internal Bonding ◽  
Thickness Swelling ◽  
Composite Board ◽  
Average Value ◽  
Composite Layers ◽  
Sago Bark

The objective of this research is to evaluate the effect of the number of composite layers on the quality of the composite board from sago bark waste and plastic waste, and the number of composite layers that produce the best quality on composite board. The composite board is made with size 30 cm x 30 cm x 1 cm. The composition and division of the material was carried out manually with the polypropylene distribution divided into three parts: the front and rear respectively of 15%, and the center 70% of the plastic weight. Target density of composite boards was 0.7 g / cm3. The treatment used is based on the number of layers composing, which is 5 layers, 7 layers, 9 layers, 11 layers and 13 layers. After mixed the sago bark particle and waste of polypropylene, the materials then compressed with hot press at 180oC with pressure about ± 25 kg / cm2 for 10 minutes. The composite boards then tested the quality included physical and mechanical properties. Testing of physical and mechanical properties refers to JIS A 5908-2003 standard. Physical properties consist of density, moisture content, thickness swelling, and water absorption. Mechanical properties consist of modulus of rupture, modulus of elasticity, internal bonding, and modulus of screw holding strength. The study used a completely randomized design experiment consisting of 5 treatments and 3 replications. The results showed the average value of composite density was range between 0.6962 – 0.7896 g/cm3, the moisture content was range between 4.3388 % - 6.8066%, the thickness swelling was range between 8.2605% - 11.9615%, and water absorption was range between 17.2380% - 22.3867%. The average value of modulus of rupture was range between 60,0632 kg/cm2 – 64,4068 kg/cm2, the modulus of elasticity was range between 17935,1813g/cm2 – 32841,8278 kg/cm2, the internal bonding was range between 1,9268 kg/cm2  - 5,4119 kg/cm2, and the modulus of screw holding strength was range between 78,2530 kg/cm2 – 92,9677 kg/cm2. The composite board made from sago stem bark waste and polypropylene waste plastic with 13 layers treatment is the best composite board and fulfilled the JIS A 5908-2003 standard. Keywords: bark of sago, composite boards, layer of composite, polypropylenes plastic, waste

Efficacy of Activated Carbon In Situ to Oil Palm Frond Paper for Active Packaging on Mechanical Properties

2012 ◽  
Vol 506 ◽  
pp. 607-610 ◽  
Author(s):  
N. Thongjun ◽  
Lerpong Jarupan ◽  
Chiravoot Pechyen
Keyword(s):  
Mechanical Properties ◽  
Activated Carbon ◽  
Moisture Content ◽  
Oil Palm ◽  
Physical And Mechanical Properties ◽  
Active Packaging ◽  
Modulus Of Rupture ◽  
Oil Palm Frond ◽  
Palm Frond

Oil palm frond pulp (OPF) was blended with activated carbon for the purpose of active packaging in this preliminary study. It was aimed to investigate the effect of in-situ activated carbon on physical and mechanical properties of the pulp handsheets made from OPF. Testing of property performances of the resulted handsheets included density, moisture content, thickness swelling, folding, tensile strength, %elongation, stiffness, and modulus of rupture. Ultimately, the intention is to use for prospected active packaging for fresh produce. OPF pulp was prepared by the kraft process. The pulp stock was mixed with different proportions of activated carbon (0, 10, 20, and 30% w/w). The results showed that an increased proportion of activated carbon decreased density and thickness selling, but had no effect on moisture content.

scholarly journals Physical and Mechanical Properties of Kenaf (Hibiscus cannabinus L.) Stems at Varying Moisture Contents

2020 ◽  
pp. 6-10
Author(s):  
S. A. Fagbemi
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Cutting Force ◽  
Young’S Modulus ◽  
Plant Height ◽  
Physical And Mechanical Properties ◽  
Hibiscus Cannabinus ◽  
Stem Diameter ◽  
Moisture Contents ◽  
Shearing Energy

The physical and mechanical properties of Nigerian variety Kenaf stems Ibadan Local were studied. Plant height was ranged from 224 cm to 327 cm and maximum stem diameter was ranged from 15 mm to 50 mm. The mechanical properties revealed that maximum cutting force and shearing energy were 1778.62 N and 10.20 J, respectively for 37% moisture content while it was 742.67 N and 3.74 J for 77% moisture content. The Young’s modulus ranged from 60.04 – 266.80 MPa. The greater shearing energy was obtained at the base of the stem.

scholarly journals Physical and mechanical properties of impregnated polystyrene jabon (Anthocephalus cadamba) glulam

2021 ◽  
Vol 891 (1) ◽  
pp. 012007
Author(s):  
Y S Hadi ◽  
E N Herliyana ◽  
I M Sulastiningsih ◽  
E Basri ◽  
R Pari ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Moisture Content ◽  
Physical And Mechanical Properties ◽  
Solid Wood ◽  
Hot Water ◽  
The Other ◽  
Modulus Of Rupture ◽  
Glued Laminated Timber ◽  
Anthocephalus Cadamba

Abstract Jabon (Anthocephalus cadamba) laminas were impregnated with polystyrene and reached 21.2% polymer loading. The laminas were manufactured for three-layer glued laminated timber (glulam) using isocyanate glue with glue spread 280 g/m2 and cold-press process. For comparison purposes, untreated glulam as control and also solid wood were prepared. The physical-mechanical properties were evaluated according to the Japanese Agricultural Standard (JAS) 234-2003. The results showed that the color of glulam was not different from polystyrene glulam. The density of polystyrene glulam was higher than untreated glulam and solid wood, but the moisture content was lower than the other. The product kinds of solid wood, untreated glulam, and polystyrene glulam did not affect shear strength and modulus of rupture (MOR), while the modulus of elasticity (MOE) of untreated glulam and hardness of polystyrene glulam were the highest values and the other products were not different one each other. Both kinds of glulam fulfilled the Japanese standard in terms of moisture content, MOR, and delamination in hot water, but MOE and shear strength did not. Regarding its advantages, polystyrene glulam could be further developed using a higher wood density.

scholarly journals The Impact of Shear and Elongational Forces on Structural Formation of Polyacrylonitrile/Carbon Nanotubes Composite Fibers during Wet Spinning Process

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2797 ◽  
Author(s):  
Hamideh Mirbaha ◽  
Parviz Nourpanah ◽  
Paolo Scardi ◽  
Mirco D’incau ◽  
Gabriele Greco ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Young’S Modulus ◽  
Shear Force ◽  
Young's Modulus ◽  
Physical And Mechanical Properties ◽  
Wet Spinning ◽  
Composite Fibers ◽  
Pan Fibers ◽  
Spun Fibers

Wet spinning of polyacrylonitrile/carbon nanotubes (PAN/CNT) composite fibers was studied and the effect of spinning conditions on structure and properties of as-spun fibers influenced by the presence of CNTs investigated. Unlike PAN fibers, shear force had a larger effect on crystalline structure and physical and mechanical properties of PAN/CNT composite fibers compared to the elongational force inside a coagulation bath. Under shear force CNTs induced nucleation of new crystals, whereas under elongational force nucleation of new crystals were hindered but the already formed crystals grew bigger. To our knowledge, this key effect has not been reported elsewhere. At different shear rates, strength, Young’s modulus and strain at break of PAN/CNT as-spun fibers were improved up to 20% compared to PAN fibers. Application of jet stretch had less influence on physical and mechanical properties of PAN/CNT fibers compared to PAN fibers. However, the improvement of interphase between polymer chains and CNTs as a result of chain orientation may have contributed to enhancement of Young’s modulus of jet stretched composite fibers.

Physicochemical and Mechanical Properties of Rice Bran Protein Hydrolysate-Loaded Films

2020 ◽  
Vol 859 ◽  
pp. 9-14
Author(s):  
Thaniya Wunnakup ◽  
Chaowalit Monton ◽  
Laksana Charoenchai ◽  
Duangdeun Meksuriyen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Moisture Content ◽  
Young’S Modulus ◽  
Rice Bran ◽  
Young's Modulus ◽  
Protein Hydrolysate ◽  
Homogeneous Mixture ◽  
Elongation At Break ◽  
Rice Bran Protein

The objective of this study was to apply rice bran protein hydrolysates (RBH) as bioactive additives of gelatin/Eudragit® NE 30D film and characterize the physicochemical and mechanical properties of its. The RBH was obtained by extraction with 2% sodium chloride (RBH-NaCl) and 0.1 N sodium hydroxide (RBH-NaOH) followed by digestion with Alcalase®. Then, RBH was incorporated in gelatin/Eudragit® NE 30D film. Effect of RBHs on film thickness, moisture content, pH, Young's modulus, tensile strength and the elongation at break were investigated. The RBH-NaCl enriched film showed non-homogeneous mixture and reduced moisture content, tensile strength and the elongation at break (1.8 – 2 folds). However, the RBH-NaOH enriched film exhibited a few non-homogeneous mixture and the Young's modulus was slightly decreased. The pH value was increased in the range of 6.77 – 6.88. Our results provide insight for the potential to develop RBH containing films as topical products.

Sign in / Sign up

Export Citation Format

Share Document