scholarly journals Towards an Efficient Generalization of the Online Dosage of Hydrogen Peroxide in Photo-Fenton Process to Treat Industrial Wastewater

2021 ◽  
Vol 18 (24) ◽  
pp. 13313
Author(s):  
Xiangwei Yu ◽  
Alejandro Cabrera-Reina ◽  
Moisès Graells ◽  
Sara Miralles-Cuevas ◽  
Montserrat Pérez-Moya
Keyword(s):  
Industrial Wastewater ◽  
Process Variable ◽  
Operating Costs ◽  
Future Research ◽  
Control Parameters ◽  
Fenton Process ◽  
Line Measurement ◽  
On Line ◽  
Set Up ◽  
H2o2 Addition

This work addresses the dosage of H2O2 in photo-Fenton processes and the monitoring of Dissolved oxygen (DO) that can be used to drive the dosage of H2O2. The objective of this work is to show that a smarter monitoring of a process variable such as DO (for which on-line measurement can be inexpensively obtained) enables the proposal and implementation of efficient dosage strategies. The work explores the application of a recent proposed strategy consisting of: (i) initial H2O2 addition, (ii) continuous H2O2 addition until a DO set up is reached, and (iii) automatic H2O2 addition by an on-off control system based on DO slope monitoring, and applies it to the treatment of different individual contaminants and their mixtures (paracetamol and sulfamethazine). The assays performed following this dosage strategy showed improved values of TOC removed per H2O2 consumed. For the case of sulfamethazine, this improvement increased up to 25–35% with respect to the efficiency obtained without dosage. Furthermore, a deeper analysis of the results allowed detecting and assessing the opportunity to redesign the dosage scheme and reduce its complexity and the number of control parameters. The promising results obtained are discussed in regard of future research into further increasing the simplicity and robustness of this generalized control strategy that improves the applicability of the photo-Fenton process by reducing its operating costs and increasing automation.

Real-Time and On-Line Measurement System for Trace Gas with Active Control Parameters

2018 ◽  
Vol 38 (5) ◽  
pp. 0530003
Author(s):  
孙明国 Sun Mingguo ◽  
马宏亮 Ma Hongliang ◽  
刘强 Liu Qiang ◽  
曹振松 Cao Zhensong ◽  
王贵师 Wang Guishi ◽  
...  
Keyword(s):  
Real Time ◽  
Active Control ◽  
Measurement System ◽  
Trace Gas ◽  
Control Parameters ◽  
Line Measurement ◽  
On Line

Thickness Measurement in the AEM by Macintosh-Based Analysis of Two-Beam Convergent Beam Patterns

1990 ◽  
Vol 48 (2) ◽  
pp. 504-505
Author(s):  
John F. Mansfield ◽  
Douglas C. Crawford
Keyword(s):  
Electron Microscope ◽  
Video Camera ◽  
Thickness Measurement ◽  
Specimen Thickness ◽  
Crystalline Materials ◽  
Beam Dynamic ◽  
Line Measurement ◽  
On Line ◽  
Image Position ◽  
Convergent Beam

A method has been developed that allows on-line measurement of the thickness of crystalline materials in the analytical electron microscope. Two-beam convergent beam electron diffraction (CBED) patterns are digitized from a JEOL 2000FX electron microscope into an Apple Macintosh II microcomputer via a Gatan #673 CCD Video Camera and an Imaging Systems Technology Video 1000 frame-capture board. It is necessary to know the lattice parameters of the sample since measurements are made of the spacing of the diffraction discs in order to calibrate the pattern. The sample thickness is calculated from measurements of the spacings of the fringes that are seen in the diffraction discs. This technique was pioneered by Kelly et al, who used the two-beam dynamic theory of MacGillavry relate the deviation parameter (Si) of the ith fringe from the exact Bragg condition to the specimen thickness (t) with the equation:Where ξg, is the extinction distance for that reflection and ni is an integer.

The use of ICT by SMMEs in a Digital Economy: A case study in Buffalo City Metropolitan in South Africa [Abstract]

10.28945/4314 ◽  
2019 ◽  
Keyword(s):  
South Africa ◽  
Technology Acceptance ◽  
21St Century ◽  
Common Knowledge ◽  
Digital Economy ◽  
Future Research ◽  
Wealth Creation ◽  
Underdeveloped Areas ◽  
And Gender ◽  
Set Up

Aim/Purpose: The goal of this study is to advance understanding of ICT utilization by SMMEs by checking access, ability (in terms of technological skills) and usage of ICT among some SMMEs entrepreneurs operating their businesses in an underdeveloped areas to enhance their business activities in order to utilizes the digital opportunities 21st century digital economies present. Background: In today’s world no nation or region is untouched by the forces of globalization and digital economy. One of the key pioneering forces of globalization is the advances of ICT like internet, social networks, etc. In the sphere of business, this pioneering force has also altered the way businesses and organizations communicate and interact with customers and society at large. Such alternation presents obvious opportunities for wealth creation and growth for businesses and organizations that are well-equipped to take advantages of them. But for those that are less-equipped, particularly SMMEs, globalization can easily lead to fore-closures and marginalization. It is a common knowledge that SMMEs entrepreneurs mostly rely on ICT gadgets like mobile phone, Laptops, Tablets to conduct their business activities as many of them don’t have enough capital to set up offices with necessary equipment. Therefore, using various ICT functions/programs on these ICT devices to enhance their business activities are critical to their businesses in the 21st century digital economies. Methodology: Purposeful sampling was used to approach fifty-four SMMEs entrepreneurs operating their businesses in underdeveloped areas locally called Townships in Buffalo City Metropolitan. Microsoft excel was used in the descriptive statistics. Contribution: This research will add to the growing knowledge ICT usage in SMMEs in the 21st century digital economies. Findings: The results indicate that the participating SMMEs entrepreneurs need to be educated, trained and supported in the use of the ICT applicable to enhance their business activities in order for them to take advantages of 21st century digital economies present. Recommendations for Practitioners: The agencies tasked with looking after SMMEs in South Africa needs to consider the lacked of utilisation of ICTs by SMMEs entrepreneurs operating their businesses in underdeveloped areas as one of the barrier to growing of their businesses and take necessary steps to address it. Recommendation for Researchers: Since age and gender have been proven to be key-moderating variables in many technology acceptance models. There is a need to explore in depth whether the factors of gender and age also act as barriers. Impact on Society: The research will assist stakeholders, policy makers and agencies tasked with looking after SMMEs to identify the barriers hindering SMMEs to grow and address them accordingly. Future Research: More work needs to be done to check whether gender, age of the SMMEs entrepreneurs have some effects on their attitude towards the integration of ICT into their business activities.

Respirometry for determination of the influents SS-concentration

1996 ◽  
Vol 33 (1) ◽  
pp. 311-323 ◽  
Author(s):  
A. Witteborg ◽  
A. van der Last ◽  
R. Hamming ◽  
I. Hemmers
Keyword(s):  
Experimental Design ◽  
Activated Sludge ◽  
Substrate Concentration ◽  
Full Scale ◽  
Activated Sludge Process ◽  
Respiration Rates ◽  
On Line ◽  
Large Measurement ◽  
Set Up

A method is presented for determining influent readily biodegradable substrate concentration (SS). The method is based on three different respiration rates, which can be measured with a continuous respiration meter which is operated in a cyclic way. Within the respiration meter nitrification is inhibited through the addition of ATU. Simulations were used to develop the respirometry set-up and decide upon the experimental design. The method was tested as part of a large measurement programme executed at a full-scale plant. The proposed respirometry set-up has been shown to be suitable for a semi-on-line determination of an influent SS which is fully based on the IAWQ #1 vision of the activated sludge process. The YH and the KS play a major role in the principle, and should be measured directly from the process.

Control Strategies for a Highly Loaded Biological Ammonia Elimination Process

1993 ◽  
Vol 28 (11-12) ◽  
pp. 531-538 ◽  
Author(s):  
B. Teichgräber
Keyword(s):  
Closed Loop ◽  
Control Strategies ◽  
Level Control ◽  
Sludge Dewatering ◽  
Loop Control ◽  
Reject Water ◽  
Line Measurement ◽  
Control Pattern ◽  
On Line ◽  
Treatment Facilities

A nitrification/denitrification process was applied to reject water treatment from sludge dewatering at Bottrop central sludge treatment facilities of the Emschergenossenschaft. On-line monitoring of influent and effluent turbidity, closed loop control of DO and pH, and on-line monitoring of nitrogen compounds were combined to a three level control pattern. Though on-line measurement of substrate and product showed substantial response time it could be used to operate nitrification/denitrification within process boundaries.

scholarly journals Monitoring the technological processes in the wood industry in order to make them more efficient through technical overhauling

2019 ◽  
Vol 290 ◽  
pp. 02007
Author(s):  
Radu Dan Paltan ◽  
Cristina Biriş ◽  
Loredana Anne-Marie Rădulescu
Keyword(s):  
Automotive Industry ◽  
Operating Mode ◽  
Solid Wood ◽  
Production Costs ◽  
Operating Costs ◽  
Future Research ◽  
Wood Industry ◽  
Research Article ◽  
State Of Research ◽  
The Cost

Of many techniques that are used to optimize production and costs, the studies conducted within a profile company lead to our choice for testing the 6Sigma method (the most used method in the automotive industry) in view of the economic efficiency applied in the wood Industry company. This method measures how many flaws exist in a process and determines in a systematic way how to improve it by technical overhauling and eliminating or minimizing the process for efficiency. This research article aims to study the state of research on the optimization of the production process through technical overhauling for panels reconstituted from solid wood and ways to make production more efficient by cutting costs through technical overhauling. From preliminary research, we estimate that all the items founded and others that will result from further research will result in a significant decrease in production costs that are reflected in the cost of the finished product and consequently in increasing the yield of the company by maximizing its profit. At the same time it may be the basis of future research studies in the field. The easier it is to maximize profits, the lower the operating costs are and the higher recovery rate of investments are, that will result a change in the operating mode: “working smarter not harder”.

On-line measurement of pulverized coal fineness on a 300 MWe power plant with pulsed digital inline holography

2021 ◽  
Author(s):  
Qiwen Jin ◽  
Xijiong Chen ◽  
Pei Li ◽  
Yonggang Zhou ◽  
Yingchun Wu ◽  
...  
Keyword(s):  
Power Plant ◽  
Pulverized Coal ◽  
Line Measurement ◽  
On Line
Sign in / Sign up

Export Citation Format

Share Document