scholarly journals Surface Functionalization of Poly(l-lactide-co-glycolide) Membranes with RGD-Grafted Poly(2-oxazoline) for Periodontal Tissue Engineering

2022 ◽  
Vol 13 (1) ◽  
pp. 4
Author(s):  
Anna M. Tryba ◽  
Małgorzata Krok-Borkowicz ◽  
Michał Kula ◽  
Natalia Piergies ◽  
Mateusz Marzec ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Soft Tissue ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Methylene Chloride ◽  
Membrane Surface ◽  
Bone Cell ◽  
Bone Tissue Regeneration ◽  
Bony Defect ◽  
Surface Modified

Bone tissue defects resulting from periodontal disease are often treated using guided tissue regeneration (GTR). The barrier membranes utilized here should prevent soft tissue infiltration into the bony defect and simultaneously support bone regeneration. In this study, we designed a degradable poly(l-lactide-co-glycolide) (PLGA) membrane that was surface-modified with cell adhesive arginine-glycine-aspartic acid (RGD) motifs. For a novel method of membrane manufacture, the RGD motifs were coupled with the non-ionic amphiphilic polymer poly(2-oxazoline) (POx). The RGD-containing membranes were then prepared by solvent casting of PLGA, POx coupled with RGD (POx_RGD), and poly(ethylene glycol) (PEG) solution in methylene chloride (DCM), followed by DCM evaporation and PEG leaching. Successful coupling of RGD to POx was confirmed spectroscopically by Raman, Fourier transform infrared in attenuated reflection mode (FTIR-ATR), and X-ray photoelectron (XPS) spectroscopy, while successful immobilization of POx_RGD on the membrane surface was confirmed by XPS and FTIR-ATR. The resulting membranes had an asymmetric microstructure, as shown by scanning electron microscopy (SEM), where the glass-cured surface was more porous and had a higher surface area then the air-cured surface. The higher porosity should support bone tissue regeneration, while the air-cured side is more suited to preventing soft tissue infiltration. The behavior of osteoblast-like cells on PLGA membranes modified with POx_RGD was compared to cell behavior on PLGA foil, non-modified PLGA membranes, or PLGA membranes modified only with POx. For this, MG-63 cells were cultured for 4, 24, and 96 h on the membranes and analyzed by metabolic activity tests, live/dead staining, and fluorescent staining of actin fibers. The results showed bone cell adhesion, proliferation, and viability to be the highest on membranes modified with POx_RGD, making them possible candidates for GTR applications in periodontology and in bone tissue engineering.

scholarly journals Mesoporous Silica Based Nanostructures for Bone Tissue Regeneration

2021 ◽  
Vol 8 ◽  
Author(s):  
Sougata Ghosh ◽  
Thomas J. Webster
Keyword(s):  
Tissue Engineering ◽  
Mesoporous Silica ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Mesoporous Silica Nanoparticles ◽  
Fluorescein Isothiocyanate ◽  
Bone Tissue Regeneration ◽  
Surface Modified ◽  
Remarkable Progress

Porous nano-scaffolds provide for better opportunities to restore, maintain, and improve functions of damaged tissues and organs by facilitating tissue regeneration. Various nanohybrids composed of mesoporous silica nanoparticles (MSNs) are being widely explored for tissue engineering. Since biological activity is enhanced by several orders of magnitude in multicomponent scaffolds, remarkable progress has been observed in this field, which has aimed to develop the controlled synthesis of multifunctional MSNs with tuneable pore size, efficient delivering capacity of bioactive factors, as well as enhanced biocompatibility and biodegradability. In this review, we aim to provide a broad survey of the synthesis of multifunctional MSN based nanostructures with exotic shapes and sizes. Further, their promise as a novel nanomedicine is also elaborated with respect to their role in bone tissue engineering. Also, recent progress in surface modification and functionalization with various polymers like poly (l-lactic acid)/poly (ε-caprolactone), polylysine-modified polyethylenimine, poly (lactic-co-glycolic acid), and poly (citrate-siloxane) and biological polymers like alginate, chitosan, and gelatine are also covered. Several attempts for conjugating drugs like dexamethasone and β–estradiol, antibiotics like vancomycin and levofloxaci, and imaging agents like fluorescein isothiocyanate and gadolinium, on the surface modified MSNs are also covered. Finally, the scope of developing orthopaedic implants and potential trends in 3D bioprinting applications of MSNs are also discussed. Hence, MSNs based nanomaterials may serve as improved candidate biotemplates or scaffolds for numerous bone tissue engineering, drug delivery and imaging applications deserving our full attention now.

PCL and PCL/PLA Scaffolds for Bone Tissue Regeneration

2013 ◽  
Vol 683 ◽  
pp. 168-171 ◽  
Author(s):  
Tatiana Patrício ◽  
Antonio Gloria ◽  
Paulo J. Bártolo
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Cell Attachment ◽  
Bone Tissue Regeneration ◽  
Engineering Applications ◽  
Printing System

This paper investigates the use of PCL and PCL/PLA scaffolds, produced using a novel additive biomanufacturing system called BioCell Printing, for bone tissue engineering applications. Results show that the BioCell Printing system produces scaffolds with regular and reproducible architecture, presenting no toxicity and enhancing cell attachment and proliferation. It was also possible to observe that the addition of PLA to PCL scaffolds strongly improves the biomechanical performance of the constructs.

scholarly journals Bone Tissue Regeneration in the Oral and Maxillofacial Region: A Review on the Application of Stem Cells and New Strategies to Improve Vascularization

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Vivian Wu ◽  
Marco N. Helder ◽  
Nathalie Bravenboer ◽  
Christiaan M. ten Bruggenkate ◽  
Jianfeng Jin ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Host Tissue ◽  
Bone Tissue Regeneration ◽  
Maxillofacial Region ◽  
Oral And Maxillofacial Region ◽  
New Strategies

Bone tissue engineering techniques are a promising alternative for the use of autologous bone grafts to reconstruct bone defects in the oral and maxillofacial region. However, for successful bone regeneration, adequate vascularization is a prerequisite. This review presents and discusses the application of stem cells and new strategies to improve vascularization, which may lead to feasible clinical applications. Multiple sources of stem cells have been investigated for bone tissue engineering. The stromal vascular fraction (SVF) of human adipose tissue is considered a promising single source for a heterogeneous population of essential cells with, amongst others, osteogenic and angiogenic potential. Enhanced vascularization of tissue-engineered grafts can be achieved by different mechanisms: vascular ingrowth directed from the surrounding host tissue to the implanted graft, vice versa, or concomitantly. Vascular ingrowth into the implanted graft can be enhanced by (i) optimizing the material properties of scaffolds and (ii) their bioactivation by incorporation of growth factors or cell seeding. Vascular ingrowth directed from the implanted graft towards the host tissue can be achieved by incorporating the graft with either (i) preformed microvascular networks or (ii) microvascular fragments (MF). The latter may have stimulating actions on both vascular ingrowth and outgrowth, since they contain angiogenic stem cells like SVF, as well as vascularized matrix fragments. Both adipose tissue-derived SVF and MF are cell sources with clinical feasibility due to their large quantities that can be harvested and applied in a one-step surgical procedure. During the past years, important advancements of stem cell application and vascularization in bone tissue regeneration have been made. The development of engineered in vitro 3D models mimicking the bone defect environment would facilitate new strategies in bone tissue engineering. Successful clinical application requires innovative future investigations enhancing vascularization.

scholarly journals Carbon Nanostructures in Bone Tissue Engineering

2016 ◽  
Vol 10 (1) ◽  
pp. 877-899 ◽  
Author(s):  
Brian Lee Perkins ◽  
Naghmeh Naderi
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Carbon Nanostructures ◽  
Bone Tissue Regeneration ◽  
Biophysical Properties ◽  
Carbon Nanostructure ◽  
Natural Bone ◽  
Wide Range

Background:Recent advances in developing biocompatible materials for treating bone loss or defects have dramatically changed clinicians’ reconstructive armory. Current clinically available reconstructive options have certain advantages, but also several drawbacks that prevent them from gaining universal acceptance. A wide range of synthetic and natural biomaterials is being used to develop tissue-engineered bone. Many of these materials are currently in the clinical trial stage.Methods:A selective literature review was performed for carbon nanostructure composites in bone tissue engineering.Results:Incorporation of carbon nanostructures significantly improves the mechanical properties of various biomaterials to mimic that of natural bone. Recently, carbon-modified biomaterials for bone tissue engineering have been extensively investigated to potentially revolutionize biomaterials for bone regeneration.Conclusion:This review summarizes the chemical and biophysical properties of carbon nanostructures and discusses their functionality in bone tissue regeneration.

scholarly journals Fabrication of Scaffolds for Bone-Tissue Regeneration

Materials ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 568 ◽  
Author(s):  
Petra Chocholata ◽  
Vlastimil Kulda ◽  
Vaclav Babuska
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Clinical Medicine ◽  
Bone Tissue Regeneration ◽  
Materials Used ◽  
Manufacturing Technologies ◽  
Regenerative Therapies ◽  
Suitable Environment

The present article describes the state of the art in the rapidly developing field of bone tissue engineering, where many disciplines, such as material science, mechanical engineering, clinical medicine and genetics, are interconnected. The main objective is to restore and improve the function of bone tissue by scaffolds, providing a suitable environment for tissue regeneration and repair. Strategies and materials used in oral regenerative therapies correspond to techniques generally used in bone tissue engineering. Researchers are focusing on developing and improving new materials to imitate the native biological neighborhood as authentically as possible. The most promising is a combination of cells and matrices (scaffolds) that can be fabricated from different kinds of materials. This review summarizes currently available materials and manufacturing technologies of scaffolds for bone-tissue regeneration.

scholarly journals Is There a Governing Role of Osteocytes in Bone Tissue Regeneration?

2020 ◽  
Vol 18 (5) ◽  
pp. 541-550
Author(s):  
Wei Cao ◽  
Marco N. Helder ◽  
Nathalie Bravenboer ◽  
Gang Wu ◽  
Jianfeng Jin ◽  
...  
Keyword(s):  
Nitric Oxide ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Bone Remodeling ◽  
Tissue Regeneration ◽  
Bone Cells ◽  
Bone Tissue Regeneration ◽  
Osteoblast Activity

Abstract Purpose of Review Bone regeneration plays an important role in contemporary clinical treatment. Bone tissue engineering should result in successful bone regeneration to restore congenital or acquired bone defects in the human skeleton. Osteocytes are thought to have a governing role in bone remodeling by regulating osteoclast and osteoblast activity, and thus bone loss and formation. In this review, we address the so far largely unknown role osteocytes may play in bone tissue regeneration. Recent Findings Osteocytes release biochemical signaling molecules involved in bone remodeling such as prostaglandins, nitric oxide, Wnts, and insulin-like growth factor-1 (IGF-1). Treatment of mesenchymal stem cells in bone tissue engineering with prostaglandins (e.g., PGE2, PGI2, PGF2α), nitric oxide, IGF-1, or Wnts (e.g., Wnt3a) improves osteogenesis. Summary This review provides an overview of the functions of osteocytes in bone tissue, their interaction with other bone cells, and their role in bone remodeling. We postulate that osteocytes may have a pivotal role in bone regeneration as well, and consequently that the bone regeneration process may be improved effectively and rapidly if osteocytes are optimally used and stimulated.

Nanomaterials for bone tissue regeneration: updates and future perspectives

Nanomedicine ◽  
2019 ◽  
Vol 14 (22) ◽  
pp. 2987-3006 ◽  
Author(s):  
Michael J Hill ◽  
Baowen Qi ◽  
Rasoul Bayaniahangar ◽  
Vida Araban ◽  
Zahra Bakhtiary ◽  
...  
Keyword(s):  
Biological Sciences ◽  
Drug Delivery ◽  
Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Multidisciplinary Approach ◽  
Bone Tissue Regeneration ◽  
Future Perspectives ◽  
Made In

Joint replacement and bone reconstructive surgeries are on the rise globally. Current strategies for implants and bone regeneration are associated with poor integration and healing resulting in repeated surgeries. A multidisciplinary approach involving basic biological sciences, tissue engineering, regenerative medicine and clinical research is required to overcome this problem. Considering the nanostructured nature of bone, expertise and resources available through recent advancements in nanobiotechnology enable researchers to design and fabricate devices and drug delivery systems at the nanoscale to be more compatible with the bone tissue environment. The focus of this review is to present the recent progress made in the rationale and design of nanomaterials for tissue engineering and drug delivery relevant to bone regeneration.

scholarly journals Bone Tissue Regeneration by Collagen Scaffolds with Different Calcium Phosphate Coatings: Amorphous Calcium Phosphate and Low-Crystalline Apatite

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5860
Author(s):  
Syama Santhakumar ◽  
Ayako Oyane ◽  
Maki Nakamura ◽  
Yuto Yoshino ◽  
Mohammed Katib Alruwaili ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Amorphous Calcium Phosphate ◽  
Bone Tissue Regeneration ◽  
Apatite Coating ◽  
Low Crystalline ◽  
Mineralized Collagen

Surface-mineralized collagen sponges have attracted much attention as scaffolds for bone tissue engineering. Recently, we developed amorphous calcium phosphate (ACP) and low-crystalline apatite coating processes on collagen sponges. In the present study, we applied these coating processes to granular collagen sponges (referred to as Col) to compare the bone tissue regeneration capabilities of ACP-coated and apatite-coated Col (referred to as Col-ACP and Col-Ap, respectively) using a rat cranial bone defect model. According to micro-CT and histological analyses, Col-Ap enhanced bone tissue regeneration compared to Col, whereas Col-ACP did not. These results not only demonstrated the superior bone tissue regeneration capability of Col-Ap, but also indicated limitations of the in vitro simulated body fluid (SBF) test used in our previous study. Despite the apatite-forming ability of Col-ACP in SBF, it was ineffective in improving bone tissue regeneration in vivo, unlike Col-Ap, most likely due to the quick resorption of the ACP coating in the defect site. The present results clarified the importance of the coating stability in vivo and revealed that the low-crystalline apatite coating was more beneficial than the ACP coating in the fabrication of surface-mineralized collagen sponges for use as bone tissue engineering scaffolds.

Enhanced osteogenic differentiation and bone regeneration of poly(lactic-co-glycolic acid) by graphene via activation of PI3K/Akt/GSK-3β/β-catenin signal circuit

2018 ◽  
Vol 6 (5) ◽  
pp. 1147-1158 ◽  
Author(s):  
Xiaowei Wu ◽  
Shang Zheng ◽  
Yuanzhou Ye ◽  
Yuchen Wu ◽  
Kaili Lin ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Glycolic Acid ◽  
Bone Defects ◽  
Bone Tissue Regeneration ◽  
Autologous Bone ◽  
Potential Strategy ◽  
Gsk 3Β ◽  
Reconstruction Of Bone Defects

The reconstruction of bone defects by guiding autologous bone tissue regeneration with graphene-based biomaterials is a potential strategy in the area of bone tissue engineering.

scholarly journals Preparing the Bone Tissue Regeneration Ground by Exosomes: From Diagnosis to Therapy

Molecules ◽  
2020 ◽  
Vol 25 (18) ◽  
pp. 4205
Author(s):  
Batla Al-Sowayan ◽  
Farah Alammari ◽  
Alaa Alshareeda
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Extracellular Vesicle ◽  
Bioactive Molecules ◽  
Bone Tissue Regeneration ◽  
Paracrine Factor ◽  
Delivery Vehicle ◽  
Immune Modulators ◽  
Clinical Utilization

Bone tissue engineering employs acellular scaffolds or scaffolds, along with cells and growth factors, to provide the mechanical support needed, as well as serve as a delivery vehicle for bioactive molecules to the injury sites. As tissue engineering continues to evolve, it has integrated two emerging fields: stem cells and nanotechnology. A paracrine factor that is found to be responsible for the major regenerative effect in stem cell transplantation is an extracellular vesicle called an ‘exosome’. Recent advances in nanotechnology have allowed the ‘exosome’ to be distinguished from other extracellular vesicles and be polymerized into a well-defined concept. Scientists are now investigating exosome uses in clinical applications. For bone-related diseases, exosomes are being explored as biomarkers for different bone pathologies. They are also being explored as a therapeutic agent where progenitor cell-derived exosomes are used to regenerate damaged bone tissue. In addition, exosomes are being tested as immune modulators for bone tissue inflammation, and finally as a delivery vehicle for therapeutic agents. This review discusses recently published literature on the clinical utilization of exosomes in bone-related applications and the correlated advantages. A particular focus will be placed on the potential utilization of regenerative cell-derived exosomes as a natural biomaterial for tissue regeneration.

Sign in / Sign up

Export Citation Format

Share Document