Molecular and Morphological Assessment of Septoria Species Associated with Ornamental Plants in Yunnan Province, China

The Karst landform is the main geographic characteristic in South China. Such areas are rich in vegetation and especially suitable for growth of shrubs and herbaceous plants. In this study, 11 Septoria strains were obtained from different plants’ leaves collected in the Kunming Botanical Garden, Yunnan Province, China. Based on single-gene and multi-gene analyses of five gene loci (tef1, rpb2, tub2, ITS, and LSU) and four gene regions (without LSU), these strains were found to belong to three independent phylogenetic lineages representing five species, including four novel taxa, and one new record for China. Five single gene trees were also provided to evaluate the effectiveness of each gene for discriminating the species, as a result of which tub2 was found to have the most suitable DNA barcode for rapid identification. Morphological descriptions, illustrations, and comparisons are provided for a more comprehensive assessment. Genealogical Concordance Phylogenetic Species Recognition (GCPSR) with a pairwise homoplasy index (PHI) test was used to evaluate the conclusions of the phylogenetic analyses.

Download Full-text

How useful is the current species recognition concept for the determination of true morels? Insights from the Czech Republic

MycoKeys ◽

10.3897/mycokeys.52.32335 ◽

2019 ◽

Vol 52 ◽

pp. 17-43

Author(s):

Irena Petrželová ◽

Michal Sochor

Keyword(s):

Czech Republic ◽

Species Recognition ◽

Phylogenetic Analyses ◽

Single Gene ◽

Molecular Taxonomy ◽

Taxonomic Revision ◽

Present Species ◽

Phylogenetic Species ◽

The Czech Republic ◽

Genealogical Concordance

The phylogentic diversity of the genus Morchella has only been sporadically studied in Central Europe. In this study, a molecular taxonomic revision of the Morchella species of the Czech Republic was performed using available fungarium specimens, fresh collections, and axenic cultures. Molecular phylogenetic analyses based on either ITS or five-locus (ITS, LSU, RPB1, RPB2, and EF-1α) sequencing and the application of principles of the genealogical concordance phylogenetic species recognition (GCPSR) have revealed the occurrence of 11 phylogenetic species in the region, but only six of them could be assigned unequivocally to the previously published phylospecies: Mel-3 (M.semilibera), Mel-10 (M.importuna), Mel-19 (M.eohespera), Mes-4 (M.americana), Mes-5 and Mes-8 (M.esculenta). One lineage was identified as a new phylospecies and is designated as Mel-39. Four lineages grouped together with two or more previously published phylospecies: Mel-13/26 (M.deliciosa), Mel-15/16 (M.angusticeps / M.eximioides), Mel-20/34 (M.purpurascens), and Mel-23/24/31/32 (M.pulchella). Our phylogenetic analyses and literature review shed light on the pitfalls of current molecular taxonomy of morels and highlight the ambiguities of present species recognition concepts. The main source of the problems seems to be rooted in the application of different methods (multigene vs single-gene sequencing, phenotypic determination) and approaches (monophyly vs paraphyly, the application or not of GCPSR, degree of differentiation between accepted species, etc.) by various authors for the delimitation of new phylospecies. Therefore, we propose five criteria for distinguishing new phylospecies in the genus Morchella based on molecular data, and recommend a more conservative approach in species delimitation.

Download Full-text

Genomic Characterization and Curation of UCEs Improves Species Tree Reconstruction

Systematic Biology ◽

10.1093/sysbio/syaa063 ◽

2020 ◽

Author(s):

Matthew H Van Dam ◽

James B Henderson ◽

Lauren Esposito ◽

Michelle Trautwein

Keyword(s):

Marine Invertebrates ◽

Phylogenetic Analyses ◽

Single Gene ◽

Gene Tree ◽

Single Copy ◽

Species Tree ◽

Bootstrap Support ◽

Gene Trees ◽

Species Trees ◽

Tree Reconstruction

Abstract Ultraconserved genomic elements (UCEs) are generally treated as independent loci in phylogenetic analyses. The identification pipeline for UCE probes does not require prior knowledge of genetic identity, only selecting loci that are highly conserved, single copy, without repeats, and of a particular length. Here, we characterized UCEs from 11 phylogenomic studies across the animal tree of life, from birds to marine invertebrates. We found that within vertebrate lineages, UCEs are mostly intronic and intergenic, while in invertebrates, the majority are in exons. We then curated four different sets of UCE markers by genomic category from five different studies including: birds, mammals, fish, Hymenoptera (ants, wasps, and bees), and Coleoptera (beetles). Of genes captured by UCEs, we find that many are represented by two or more UCEs, corresponding to nonoverlapping segments of a single gene. We considered these UCEs to be nonindependent, merged all UCEs that belonged to a particular gene, constructed gene and species trees, and then evaluated the subsequent effect of merging cogenic UCEs on gene and species tree reconstruction. Average bootstrap support for merged UCE gene trees was significantly improved across all data sets apparently driven by the increase in loci length. Additionally, we conducted simulations and found that gene trees generated from merged UCEs were more accurate than those generated by unmerged UCEs. As loci length improves gene tree accuracy, this modest degree of UCE characterization and curation impacts downstream analyses and demonstrates the advantages of incorporating basic genomic characterizations into phylogenomic analyses. [Anchored hybrid enrichment; ants; ASTRAL; bait capture; carangimorph; Coleoptera; conserved nonexonic elements; exon capture; gene tree; Hymenoptera; mammal; phylogenomic markers; songbird; species tree; ultraconserved elements; weevils.]

Download Full-text

The impact of incongruence and exogenous gene fragments on estimates of the eukaryote root

10.1101/2021.04.08.438903 ◽

2021 ◽

Author(s):

Caesar Al Jewari ◽

Sandra L Baldauf

Keyword(s):

Phylogenetic Analyses ◽

Single Gene ◽

Evolutionary Model ◽

Bootstrap Support ◽

Gene Trees ◽

Full Data ◽

Data Set ◽

Gene Level ◽

The Impact ◽

Exogenous Gene

Phylogenomics uses multiple genetic loci to reconstruct evolutionary trees, under the stipulation that all combined loci share a common phylogenetic history, i.e., they are congruent. Congruence is primarily evaluated via single-gene trees, but these trees invariably lack sufficient signal to resolve deep nodes making it difficult to assess congruence at these levels. Two methods were developed to systematically assess congruence in multi-locus data. Protocol 1 uses gene jackknifing to measure deviation from a central mean to identify taxon-specific incongruencies in the form of persistent outliers. Protocol_2 assesses congruence at the sub-gene level using a sliding window. Both protocols were tested on a controversial data set of 76 mitochondrial proteins previously used in various combinations to assess the eukaryote root. Protocol_1 showed a concentration of outliers in under-sampled taxa, including the pivotal taxon Discoba. Further analysis of Discoba using Protocol_2 detected a surprising number of apparently exogenous gene fragments, some of which overlap with Protocol_1 outliers and others that do not. Phylogenetic analyses of the full data using the static LG-gamma evolutionary model support a neozoan-excavate root for eukaryotes (Discoba sister), which rises to 99-100% bootstrap support with data masked according to either Protocol_1 or Protocol_2. In contrast, site-heterogeneous (mixture) models perform inconsistently with these data, yielding all three possible roots depending on presence/absence/type of masking and/or extent of missing data. The neozoan-excavate root places Amorphea (including animals and fungi) and Diaphoretickes (including plants) as more closely related to each other than either is to Discoba (Jakobida, Heterolobosea, and Euglenozoa), regardless of the presence/absence of additional taxa.

Download Full-text

Genomic characterization and curation of UCEs improves species tree reconstruction

10.1101/828335 ◽

2019 ◽

Author(s):

Matthew H. Van Dam ◽

James B. Henderson ◽

Lauren Esposito ◽

Michelle Trautwein

Keyword(s):

Marine Invertebrates ◽

Phylogenetic Analyses ◽

Single Gene ◽

Single Copy ◽

Species Tree ◽

Bootstrap Support ◽

Gene Trees ◽

Species Trees ◽

Tree Reconstruction ◽

Phylogenomic Analyses

ABSTRACTUltraconserved genomic elements (UCEs), are generally treated as independent loci in phylogenetic analyses. The identification pipeline for UCE probes is agnostic to genetic identity, only selecting loci that are highly conserved, single copy, without repeats, and of a particular length. Here we characterized UCEs from 12 phylogenomic studies across the animal tree of life, from birds to marine invertebrates. We found that within vertebrate lineages, UCEs are mostly intronic and intergenic, while in invertebrates, the majority are in exons. We then curated 4 different sets of UCE markers by genomic category from 5 different studies including; birds, mammals, fish, Hymenoptera (ants, wasps and bees) and Coleoptera (beetles). Of genes captured by UCEs, we find that many are represented by 2 or more UCEs, corresponding to non-overlapping segments of a single gene. We considered these UCEs to be non-independent, merged all UCEs that belonged to a particular gene, constructed gene and species trees, and then evaluated the subsequent effect of merging co-genic UCEs on gene and species tree reconstruction. Average bootstrap support for merged UCE gene trees were significantly improved across all datasets. Increased loci length appears to drive this increase in bootstrap support. Additionally, we found that gene trees generated from merged UCEs were more accurate than those generated by unmerged and randomly merged UCEs, based on our simulation study. This modest degree of UCE characterization and curation impacts downstream analyses and demonstrates the advantages of incorporating basic genomic characterizations into phylogenomic analyses.

Download Full-text

Evolutionary relationships among Massospora spp. (Entomophthorales), obligate pathogens of cicadas

10.1101/811836 ◽

2019 ◽

Cited By ~ 2

Author(s):

Angie M. Macias ◽

David M. Geiser ◽

Jason E. Stajich ◽

Piotr Łukasik ◽

Claudio Veloso ◽

...

Keyword(s):

Phylogenetic Analyses ◽

Single Gene ◽

Elongation Factor ◽

Phylogenetic Inference ◽

Monophyletic Group ◽

Evolutionary Relationships ◽

Rrna Gene ◽

28S Rrna ◽

Gene Trees ◽

Morphological Studies

AbstractThe fungal genus Massospora (Zoopagomycota: Entomophthorales) includes more than a dozen obligate, sexually transmissible pathogenic species that infect cicadas (Hemiptera) worldwide. At least two species are known to produce psychoactive compounds during infection, which has garnered considerable interest for this enigmatic genus. As with many Entomophthorales, the evolutionary relationships and host associations of Massospora spp. are not well understood. The acquisition of M. diceroproctae from Arizona, M. tettigatis from Chile, and M. platypediae from California and Colorado provided an opportunity to conduct molecular phylogenetic analyses and morphological studies to investigate if these fungi represent a monophyletic group and delimit species boundaries. In a three-locus phylogenetic analysis including the D1–D2 domains of the nuclear 28S rRNA gene (28S), elongation factor 1 alpha-like (EFL), and beta-tubulin (BTUB), Massospora was resolved in a strongly supported monophyletic group containing four well-supported genealogically exclusive lineages, based on two of three methods of phylogenetic inference. There was incongruence among the single-gene trees: two methods of phylogenetic inference recovered trees with either the same topology as the 3-gene concatenated tree (EFL), or a basal polytomy (28S, BTUB). Massospora levispora and M. platypediae isolates formed a single lineage in all analyses and are synonymized here as M. levispora. Massospora diceroproctae was sister to M. cicadina in all three single-gene trees and on an extremely long branch relative to the other Massospora, and even the outgroup taxa, which may reflect an accelerated rate of molecular evolution and/or incomplete taxa sampling. The results of the morphological study presented here indicate that spore measurements may not be phylogenetically or diagnostically informative. Despite recent advances in understanding the ecology of Massospora, much about its host range and diversity remains unexplored. The emerging phylogenetic framework can provide a foundation for exploring co-evolutionary relationships with cicada hosts and the evolution of behavior-altering compounds.

Download Full-text

Phylogenetics of a small caddisfly genus (Thremmatidae: Oligophlebodes): comparison among multiple hypotheses from DNA barcode data

Zoosymposia ◽

10.11646/zoosymposia.14.1.21 ◽

2019 ◽

Vol 14 (1) ◽

pp. 193-203

Author(s):

DANA WEAVER ◽

JOSEPH C. SPAGNA ◽

PATINA K. MENDEZ

Keyword(s):

Single Gene ◽

Dna Barcode ◽

Coi Gene ◽

The Novel ◽

Gene Trees ◽

Likelihood Methods ◽

Basal Node ◽

Distance Methods ◽

Likelihood Analysis ◽

Codon Positions

Barcoding datasets can serve as a resource for species associations and delineations, but single-gene trees estimated by distance methods do not provide strong estimates of phylogeny. Using DNA data from the Barcode of Life Database (BOLD), we calculate a phylogenetic tree for Oligophlebodes (Trichoptera: Thremmatidae), a small genus of caddisfly endemic to the Western United States. Here we estimate a preliminary phylogeny for Oligophlebodes using Bayesian likelihood, and compare it to trees produced by distance and standard likelihood methods. Using the barcode region of the cytochrome oxidase 1 (COI) gene, we analyzed 44 individuals representing five species (and 2 unknowns) and a sister-genus outgroup (Neophylax) from locations ranging from Southern New Mexico northwest into British Columbia. Partitioned Bayesian likelihood analysis under the F81 (1st codon positions) and HKY80 + I + Γ (for both the 2nd and 3rd codon positions) model gave the consensus topology (Neophylax toshi, (O. sierra, (O. ruthae inc. spc. 1 & 2, O. sigma, (spc. 3 & 4, (O. ardis, O. minutus)))). Species identifications were supported by monophyly of most species-level taxa. However, confirmation of species identifications of unknowns was complicated by incomplete taxon sampling for spc. 1 & 2. Placement of spc. 3 & 4 may serve as support for taxonomic review of O. minutus. Compared with an existing published phylogeny of Oligophlebodes BOLD sequences constructed under RAxML, the Bayesian hypothesis had higher resolution at the basal node of Oligophlebodes. Because of their support values, both likelihood trees are recommended over the BOLD TaxonID tree (an unrooted neighbor joining tree using the Kimura 2-parameter model). The novel topology produced in the Bayesian tree supports further explorations by likelihood-based methods, including partitioned analyses, of our preliminary Oligophlebodes dataset that can be used as additional lines of evidence to support morphological work.

Download Full-text

Coniella vitis sp. nov. Is the Common Pathogen of White Rot in Chinese Vineyards

Plant Disease ◽

10.1094/pdis-12-16-1741-re ◽

2017 ◽

Vol 101 (12) ◽

pp. 2123-2136 ◽

Cited By ~ 5

Author(s):

K. W. T. Chethana ◽

Y. Zhou ◽

W. Zhang ◽

M. Liu ◽

Q. K. Xing ◽

...

Keyword(s):

Species Recognition ◽

Phylogenetic Analyses ◽

Large Subunit ◽

Elongation Factor ◽

White Rot ◽

Common Disease ◽

Internal Transcribed Spacer Region ◽

Translation Elongation ◽

Genealogical Concordance ◽

Vitis Sp

Grape white rot is a common disease and causes considerable yield losses in many grape-growing regions when environmental conditions are favorable. We surveyed grape white rot in five provinces in China and collected 27 isolates from diseased grape tissues. Multigene phylogenetic analyses of the internal transcribed spacer region (ITS1-5.8S-ITS2), the 28S large subunit of nuclear ribosomal RNA (LSU), partial translation elongation factor 1-alpha gene (TEF 1-α), and partial histone 3 gene (HIS), coupled with genealogical concordance phylogenetic species recognition and morphological observations, revealed that Coniella vitis sp. nov. and C. diplodiella are the causal agents of grape white rot in China. Koch’s postulates were performed on Vitis vinifera cv. Summer Black in a greenhouse. These results confirmed the pathogenicity on grapes, as symptoms were reproduced, and also indicated significant variations in the virulence among C. vitis isolates. This work provides evidence that C. vitis is the main pathogen of grape white rot in China and also provides an optimized multigene backbone for resolving Coniella species.

Download Full-text

High diversity of Morchella and a novel lineage of the Esculenta clade from the north Qinling Mountains revealed by GCPSR-based study

Scientific Reports ◽

10.1038/s41598-019-56321-1 ◽

2019 ◽

Vol 9 (1) ◽

Cited By ~ 1

Author(s):

Phonepaserd Phanpadith ◽

Zhongdong Yu ◽

Tao Li

Keyword(s):

Phylogenetic Trees ◽

Species Recognition ◽

Single Gene ◽

Qinling Mountains ◽

Phylogenetic Species ◽

The North ◽

Genealogical Concordance ◽

Commercial Cultivars ◽

Commercial Farms ◽

North Qinling

AbstractChina is a mainland country rich in natural morel recourses, having records of half of the worldwide 61 morel phylospecies. In this study, 31 collections of ascocarps from the north Qinling Mountains, 4 collections of commercial cultivars from the south Qinling Mountains, and 3 Morchella mycelium clones from commercial cultivars were investigated using the genealogical concordance phylogenetic species recognition (GCPSR) method. Maximum-likelihood was employed for the construction of phylogenetic trees. A total of five phylogenetic species were found among the 38 collections, namely Morchella sp. Mes-8, Mes-9, Mes-13, and Mes-25, and Morchella chensiensis (IF556780), in addition to the false morel (Verpa bohemica). The identification of cultivated Morchella sp. Mel-2, Mel-6, Mel-10, and Mel-12 coincided with that of the commercial farms. A total of 80% (4/5) of yellow morels were new records for the Qinling region, except Mes-19; moreover, a novel monophyletic lineage, Morchella chensiensis, was found to be distinct from the previously reported phylospecies by single gene and combined genes analysis, thus being herein proposed as a new phylospecies. All collections from this study showed continental endemism, and all Qinling Mountains collections were grouped together in rDNA phylogenetic trees. The study provided insights on biodiversities in this key region of China.

Download Full-text

Using Genealogical Concordance and Coalescent-Based Species Delimitation to Assess Species Boundaries in the Diaporthe eres Complex

Journal of Fungi ◽

10.3390/jof7070507 ◽

2021 ◽

Vol 7 (7) ◽

pp. 507

Author(s):

Sandra Hilário ◽

Micael F. M. Gonçalves ◽

Artur Alves

Keyword(s):

Nucleotide Diversity ◽

Species Recognition ◽

Phylogenetic Analyses ◽

Single Species ◽

Diversity Indices ◽

Species Boundaries ◽

Phylogenetic Species ◽

Individual Gene ◽

Genealogical Concordance ◽

The Common

DNA sequence analysis has been of the utmost importance to delimit species boundaries in the genus Diaporthe. However, the common practice of combining multiple genes, without applying the genealogical concordance criterion has complicated the robust delimitation of species, given that phylogenetic incongruence between loci has been disregarded. Despite the several attempts to delineate the species boundaries in the D. eres complex, the phylogenetic limits within this complex remain unclear. In order to bridge this gap, we employed the Genealogical Phylogenetic Species Recognition principle (GCPSR) and the coalescent-based model Poisson Tree Processes (PTPs) and evaluated the presence of recombination within the D. eres complex. Based on the GCPSR principle, presence of incongruence between individual gene genealogies, i.e., conflicting nodes and branches lacking phylogenetic support, was evident. Moreover, the results of the coalescent model identified D. eres complex as a single species, which was not consistent with the current large number of species within the complex recognized in phylogenetic analyses. The absence of reproductive isolation and barriers to gene flow as well as the high haplotype and low nucleotide diversity indices within the above-mentioned complex suggest that D. eres constitutes a population rather than different lineages. Therefore, we argue that a cohesive approach comprising genealogical concordance criteria and methods to detect recombination must be implemented in future studies to circumscribe species in the genus Diaporthe.

Download Full-text

Koorchaloma oryzae sp. nov. (Stachybotryaceae, Sordariomycetes), from Oryza sativa (Poaceae) in northern Thailand

Phytotaxa ◽

10.11646/phytotaxa.524.4.4 ◽

2021 ◽

Vol 524 (4) ◽

pp. 283-292

Author(s):

XINGGUO TIAN ◽

SAMANTHA C. KARUNARATHNA ◽

AUSANA MAPOOK ◽

JIANCHU XU ◽

DANFENG BAO ◽

...

Keyword(s):

Oryza Sativa ◽

New Species ◽

Species Recognition ◽

Phylogenetic Analyses ◽

Test Results ◽

Phylogenetic Species ◽

Closely Related Species ◽

Genealogical Concordance ◽

Statistical Support ◽

A New Species

A new species of Koorchaloma is described based on morphology and multigene phylogenetic analyses of ITS, LSU and RPB2. Phylogenetic analyses showed our strain clusters with K. europaea with moderate statistical support. Koorchaloma oryzae sp. nov. is morphologically similar to K. europaea, but it can be distinguished by the conidiophores and conidia, while ITS pairwise nucleotide comparison of these two species also revealed differences. Koorchaloma oryzae is compared with all known Koorchaloma species, and a key to Koorchaloma species is provided. Genealogical concordance phylogenetic species recognition analysis (PHI test) results of the new species and closely related species are also given.

Download Full-text