scholarly journals Use of Different Types of Biosorbents to Remove Cr (VI) from Aqueous Solution

Life ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 240
Author(s):  
Eva Pertile ◽  
Tomáš Dvorský ◽  
Vojtěch Václavík ◽  
Silvie Heviánková
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Ph Value ◽  
Juglans Regia ◽  
Chemical Activation ◽  
Second Order ◽  
Order Kinetic ◽  
Fomitopsis Pinicola ◽  
Adsorption Data ◽  
Pseudo Second Order

This article summarizes the results of a research study that was focused on the possibility of removing Cr (VI) from aqueous solution, using low-cost waste biomaterial in a batch mode. A set of seven biosorbents was used: Fomitopsis pinicola, a mixture of cones, peach stones, apricot stones, Juglans regia shells, orange peels, and Merino sheep wool. Three grain fractions (fr. 1/2, fr. 0.5/1.0, and fr. 0/0.5 mm) of biosorbents were studied. The aim was to find the most suitable biosorbent that can be tested with real samples. The influence of other factors on the course of biosorption was studied as well (chemical activation of the biosorbent, pH value, rotation speed during mixing, temperature, and the influence of biosorbent concentration). The use of chemical activation and adjustment of the pH to 1.1 to 2.0 make it possible to increase their sorption capacity and, for some biosorbents, to shorten the exposure times. Two kinetic models were used for the analysis of the experimental data, to explain the mechanism of adsorption and its possible speed control steps: pseudo-first and pseudo-second-order. The pseudo-second-order kinetic model seems to be the most suitable for the description of the experimental data. The thermodynamic parameters suggest that the biosorption was endothermic and spontaneous. In the biosorption equilibrium study, the adsorption data were described by using Langmuir and Freundlich adsorption isotherms. The Langmuir model was applicable to describe the adsorption data of all biosorbents. Both models are suitable for chemically treated sheep fleece and peach stones.

scholarly journals Sythesis of Nano Zerovalent Iron Supported Sawdust (NZVI/SD) and Its Application for Removal of Arsenic (III) from Aqueous Solution

2020 ◽  
pp. 1-12
Author(s):  
Tasrina R. Choudhury ◽  
Snahasish Bhowmik ◽  
M. S. Rahman ◽  
Mithun R. Nath ◽  
F. N. Jahan ◽  
...  
Keyword(s):  
Ph Value ◽  
Ferrous Sulphate ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Zerovalent Iron ◽  
Isotherm Model ◽  
Order Kinetic ◽  
Adsorption Sites ◽  
Adsorption Data ◽  
Pseudo Second Order

Sawdust supported nano-zerovalent (NZVI/SD) iron was synthesized by treating sawdust with ferrous sulphate followed by reduction with NaBH4. The NZVI/SD was characterized by SEM, XRD, FTIR and Chemical method. Adsorption of As (III) by NZVI/SD was investigated and the maximum uptake of As (III) was found at pH value of 7.74 and equilibrium time of 3 hrs. The adsorption isotherm modelling revealed that the equilibrium adsorption data were better fitted with the Langmuir isotherm model compared with the Freundlich Isotherm model. This study revealed that the maximum As (III) ions adsorption capacity was found to be 12.66 mg/g for using NZVI/SD adsorbent. However, the kinetics data were tested by pseudo-first-order and pseudo-second-order kinetic models; and it was observed that the adsorption data could be well fitted with pseudo-second-order kinetics for As (III) adsorption onto NZVI/SD depending on both adsorbate concentration and adsorption sites. The result of this study suggested that NZVI/SD could be developed as a prominent environment-friendly adsorbent for the removal of As (III) ions from aqueous systems.

scholarly journals Fabrication of Amino Functionalized Magnetic Expanded Graphite Nanohybrids for Application in Removal of Ag(I) from Aqueous Solution

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Ying-Xia Ma ◽  
Yong-Xin Ruan ◽  
Dan Xing ◽  
Xue-Yan Du ◽  
Pei-Qing La
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Expanded Graphite ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
One Pot ◽  
X Ray ◽  
Pseudo Second Order

Ethylenediamine functionalized magnetic expanded graphite decorated with Fe3O4 nanoparticles (MEG-NH2) was fabricated by one-pot solvothermal method. The as-prepared MEG-NH2 nanohybrids were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and Zeta potential analyzer. The effects of Fe3O4 content in MEG-NH2 nanohybrids, pH, initial concentration, contact time, and dosage on adsorption properties of the MEG-NH2 nanohybrids for Ag(I) from aqueous solution were investigated by batch experiments. The pseudo-first-order and the pseudo-second-order kinetic models were utilized to study adsorption kinetics. The experimental data was also analyzed with Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models. The results show that Ag(I) was reduced to silver in the process of the adsorption by MEG-NH2 nanohybrids; the experimental data was better fitted to pseudo-second-order model and Langmuir isotherm model which revealed that the adsorption process was a chemical adsorption by the formation of silver on the surface of MEG-NH2 nanohybrids.

Experimental Investigation on Adsorptive Removal of Phenolic Compounds from Aqueous Solution by Cr-Bentonite

2010 ◽  
Vol 160-162 ◽  
pp. 163-170
Author(s):  
Hong Zheng ◽  
Yang Wang ◽  
Peng Liang ◽  
Hong Bin Qi
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Phenolic Compounds ◽  
Intraparticle Diffusion ◽  
Second Order ◽  
Synthetic Wastewater ◽  
Order Kinetic ◽  
Sorption Data ◽  
Adsorptive Removal ◽  
Pseudo Second Order

The ability of Cr-bentonite prepared using synthetic wastewater containing chromium was investigated for adsorptive removal of 4-aminophenol and 4-chlorophenol from aqueous solution in a batch system at 25 °C. The physic-chemical parameters including pH value of solution and contact time were studied. The experimental data were analyzed by the Langmuir, Freundlich and Temkin models of sorption. The equilibrium sorption data for 4-aminophenol and 4-chlorophenol were well fitted to Langmuir adsorption isotherm and the monolayer sorption capacity was found to be 26.53 and 23.81 mg/g at 25 °C, respectively. The sorption energy calculated from Dubinin-Redushkevich (D-R) isotherm are 8.31 and 8.20 kJ/mol for the uptake of 4-aminophenol and 4-chlorophenol respectively which indicates that both the sorption processes are chemical in nature. The kinetic data were analyzed using pseudo-first order, pseudo-second order kinetic equation and intraparticle diffusion model. The experimental data fit very well the pseudo-second order kinetic model. Intraparticle diffusion affects 4-aminophenol and 4-chlorophenol uptake. Sorption studies carried out using industrial wastewater samples containing phenolic compounds show that there is significant potential for Cr-bentonite as an adsorbent material for phenollic compounds removal from aqueous solutions.

scholarly journals Selective Cu(II) Adsorption from Aqueous Solutions Including Cu(II), Co(II), and Ni(II) by Modified Acrylic Acid Grafted PET Film

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Nazia Rahman ◽  
Nobuhiro Sato ◽  
Satoru Yoshioka ◽  
Masaaki Sugiyama ◽  
Hirotaka Okabe ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Acrylic Acid ◽  
Metal Ions ◽  
Functional Groups ◽  
Metal Ion ◽  
Second Order ◽  
Isotherm Models ◽  
Adsorption Data ◽  
Pseudo Second Order

Acrylic acid (AAc) grafted polyethylene terephthalate (PET) films were prepared by γ irradiation. The graft films showed little metal ion adsorption due to compact structure of the graft chains as shown by the scanning electron microscopy (SEM) images which restricted the access of metal ions to the functional groups. Therefore, the graft films were modified with KOH treatment for expansion of the graft chains to facilitate the access of metal ions to the functional groups. The modified films were used to study the selective Cu2+ adsorption from aqueous solution containing Cu2+, Co2+, and Ni2+. Langmuir and Freundlich isotherm models were used for interpretation of selective equilibrium adsorption data and Langmuir model showed better fitting with experimental data. Again pseudo-first-order and pseudo-second-order equations were used for interpretation of selective kinetic adsorption data and pseudo-second-order equation showed better prediction of experimental data. The adsorbent film showed high selectivity towards Cu2+ in presence of Cu2+, Co2+, and Ni2+ in the pH range of 1.5 to 4.5. Desorption and reuse of the adsorbent film were also studied which indicated that the film can be used repeatedly for selective Cu2+ sorption from aqueous solution.

Study on Adsorption of Mercury from Aqueous Solution on Activated Carbons Prepared from Palm Kernel Shell

2018 ◽  
Vol 783 ◽  
pp. 109-114
Author(s):  
Nor Salmi Abdullah ◽  
Syazrin Syima Sharifuddin ◽  
Mohd. Hazwan Hussin
Keyword(s):  
Aqueous Solution ◽  
Treatment Time ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Palm Kernel ◽  
Second Order ◽  
Solution Temperature ◽  
Order Kinetic ◽  
Palm Kernel Shell ◽  
Pseudo Second Order

The adsorption ability of powdered activated carbons (PAC) derived from palm kernel shell (PKS) was investigated. PAC was prepared by chemical activation method using ZnCl2as an activating agents. The adsorption studies of Hg(II) was carried out under control condition with constant pH, solution temperature (30 °C), treatment time (90 min) and absorbent dosage (2.0 g L-1). It was revealed that PAC efficiently removed as much as 10 mg L-1of Hg(II) with the percentage of removal up to 97.7 %. Both Langmuir and Freundlich adsorption isotherms were used to explain the adsorption behavior. Freundlich model was found to be fitted well and favored multilayer adsorption. The kinetics data were fitted with pseudo-first order and pseudo-second order, and it was found to obeys the pseudo-second order kinetic order. Recent finding suggest that PKS has the potential to be a promising precursor for the production of activated carbon with the excellent adsorption capacity to remove Hg(II) from aqueous solution.

scholarly journals Cauliflower Leave, an Agricultural Waste Biomass Adsorbent, and Its Application for the Removal of MB Dye from Aqueous Solution: Equilibrium, Kinetics, and Thermodynamic Studies

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Seraj Anwar Ansari ◽  
Fauzia Khan ◽  
Anees Ahmad
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Methylene Blue ◽  
Agricultural Waste ◽  
Second Order ◽  
Batch Adsorption ◽  
Agricultural Crop ◽  
Order Kinetic ◽  
Basic Dye ◽  
Pseudo Second Order

Cauliflower leaf powder (CLP), a biosorbent prepared from seasonal agricultural crop waste material, has been employed as a prospective adsorbent for the removal of a basic dye, methylene blue (MB) from aqueous solution by the batch adsorption method under varying conditions, namely, initial dye concentration, adsorbent dose, solution pH, and temperature. Characterization of the material by FTIR and SEM indicates the presence of functional groups and rough coarse surface suitable for the adsorption of methylene blue over it. Efforts were made to fit the isotherm data using Langmuir, Freundlich, and Temkin equation. The experimental data were best described by Freundlich isotherm model, with an adsorption capacity of 149.22 mg/g at room temperature. To evaluate the rate of methylene blue adsorption onto CLP, pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were employed. The experimental data were best described by the pseudo-second-order kinetic model. Evaluation of thermodynamic parameters such as changes in enthalpy, entropy, and Gibbs’ free energy showed the feasible, spontaneous, and exothermic nature of the adsorption process. On the basis of experimental results obtained, it may be concluded that the CLP prepared from agricultural waste has considerable potential as low-cost adsorbent in wastewater treatment for the removal of basic dye, MB.

Nano-ZrO2/TiO2 Impregnated Orange Wood Sawdust and Peach Stone Shell Adsorbents for Cr (VI) Removal

2020 ◽  
Vol 16 (7) ◽  
pp. 880-892
Author(s):  
Şerife Parlayıcı ◽  
Kübra Tuna Sezer ◽  
Erol Pehlivan
Keyword(s):  
Contact Time ◽  
Ph Value ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Wood Sawdust ◽  
Adsorption Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Equilibrium Status

Background: In this work, Cr (VI) adsorption on nano-ZrO2๏TiO2 impregnated orange wood sawdust (Zr๏Ti/OWS) and nano-ZrO2๏TiO2 impregnated peach stone shell (Zr๏Ti/PSS) was investigated by applying different adsorption parameters such as Cr (VI) concentrations, contact time, adsorbent dose, and pH for all adsorbents. Methods: The adsorbents were characterized by SEM and FT-IR. The equilibrium status was achieved after 120 min of contact time and optimum pH value around 2 were determined for Cr (VI) adsorption. Adsorption data in the equilibrium is well-assembled by the Langmuir model during the adsorption process. Results: Langmuir isotherm model showed a maximum adsorption value of OWS: 21.65 mg/g and Zr๏Ti/OWS: 27.25 mg/g. The same isotherm displayed a maximum adsorption value of PSS: 17.64 mg/g, and Zr๏Ti/PSS: 31.15 mg/g. Pseudo-second-order kinetic models (R2=0.99) were found to be the best models for describing the Cr (VI) adsorption reactions. Conclusıon: Thermodynamic parameters such as changes in ΔG°, ΔH°, and ΔS° have been estimated, and the process was found to be spontaneous.

Adsorption Characteristics of Phenol in Aqueous Solution by Pinus massoniana Biochar

2013 ◽  
Vol 295-298 ◽  
pp. 1154-1160 ◽  
Author(s):  
Guo Zhi Deng ◽  
Xue Yuan Wang ◽  
Xian Yang Shi ◽  
Qian Qian Hong
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Pinus Massoniana ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Salt Ions ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The objective of this paper is to investigate the feasibility of phenol adsorption from aqueous solution by Pinus massoniana biochar. Adsorption conditions, including contact time, initial phenol concentration, adsorbent dosage, strength of salt ions and pH, have been investigated by batch experiments. Equilibrium can be reached in 24 h for phenol from 50 to 250 mg• L-1. The optimum pH value for this kind of biochar is 5.0. The amount of phenol adsorbed per unit decreases with the increase in adsorbent dosage. The existence of salt ions makes negligible influence on the equilibrium adsorption capacity. The experimental data is analyzed by the Freundlich and Langmuir isotherm models. Equilibrium data fits well to the Freundlich model. Adsorption kinetics models are deduced and the pseudo-second-order kinetic model provides a good correlation for the adsorbent process. The results show that the Pinus massoniana biochar can be utilized as an effective adsorption material for the removal of phenol from aqueous solution.

scholarly journals Kinetic and Thermodynamic Studies of Chromium (VI) Sorption by Pure and Carbonized Fluted Pumpkin waste biomass (Telfairia occidentalis Hook F.)

2012 ◽  
Vol 27 ◽  
pp. 11-18
Author(s):  
Timi Tarawou ◽  
Michael Horsfall
Keyword(s):  
Aqueous Solution ◽  
Rate Constants ◽  
Industrial Effluents ◽  
Second Order ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Fluted Pumpkin ◽  
Chromium Vi ◽  
Telfairia Occidentalis ◽  
Pseudo Second Order

The adsorption of chromium (VI) ions from aqueous solution was studied using pure and carbonized fluted pumpkin waste biomass (FPWB). The kinetic data shows a pseudo-first-order mechanism with rate constants of 1.26 × 10-2 and 1.933 × 10-2 mg g-1 min-1 for the pure and carbonized FPWB, respectively. While the pseudo-second-order mechanism has rate constants of 0.93 × 10-1 and 1.33 × 10-1 mg g-1 min-1 for the pure and carbonized waste biomass respectively. The pseudo-second order kinetic model was found to be more suitable for describing the experimental data based on the correlation coefficient values (R2) of 0.9975 and 0.9994 obtained for pure waste biomass (PWB) and carbonized waste biomass (CWB), respectively. The results obtained from this study show that PWB and CWB have very high removal capacity for chromium (VI) from aqueous solution over a range of reaction conditions. Thus, fluted pumpkin waste biomass (Telfairia occidentalis Hook F) is a potential sorbent for the treatment of industrial effluents containing chromium (VI) contaminant.DOI: http://dx.doi.org/10.3126/jncs.v27i1.6436 J. Nepal Chem. Soc., Vol. 27, 2011 11-18Uploaded date: 16 July, 2012

Kinetics of Glyphosate Adsorption on Composite Resin from Aqueous Solution

2013 ◽  
Vol 803 ◽  
pp. 157-160
Author(s):  
Zhen Zhen Kong ◽  
Dong Mei Jia ◽  
Su Wen Cui
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Composite Resin ◽  
Order Equation ◽  
Second Order ◽  
First Order ◽  
Basic Resin ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Best Fit

The composite weakly basic resin (D301Fe) was prepared and examined using scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption kinetics of glyphosate from aqueous solution onto composite weakly basic resin (D301Fe) were investigated under different conditions. The experimental data was analyzed using various adsorption kinetic models like pseudo-first order, the pseudo-second order, the Elovich and the parabolic diffusion models to determine the best-fit equation for the adsorption of glyphosate onto D301Fe. The results show that the pseudo-second order equation fitted the experimental data well and its adsorption was chemisorption-controlled.

Sign in / Sign up

Export Citation Format

Share Document