Kinetics of Glyphosate Adsorption on Composite Resin from Aqueous Solution

2013 ◽  
Vol 803 ◽  
pp. 157-160
Author(s):  
Zhen Zhen Kong ◽  
Dong Mei Jia ◽  
Su Wen Cui
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Composite Resin ◽  
Order Equation ◽  
Second Order ◽  
First Order ◽  
Basic Resin ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Best Fit

The composite weakly basic resin (D301Fe) was prepared and examined using scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption kinetics of glyphosate from aqueous solution onto composite weakly basic resin (D301Fe) were investigated under different conditions. The experimental data was analyzed using various adsorption kinetic models like pseudo-first order, the pseudo-second order, the Elovich and the parabolic diffusion models to determine the best-fit equation for the adsorption of glyphosate onto D301Fe. The results show that the pseudo-second order equation fitted the experimental data well and its adsorption was chemisorption-controlled.

Adsorption of Aniline from Aqueous Solution by KSF Montmorillonite

2011 ◽  
Vol 356-360 ◽  
pp. 208-216
Author(s):  
Jiang Ying Zhang ◽  
Jian Xu ◽  
Yuan Zhang ◽  
Lei Li ◽  
Ying Zhang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Intraparticle Diffusion ◽  
Order Equation ◽  
Second Order ◽  
First Order ◽  
Ph Values ◽  
Whole Process ◽  
Pseudo Second Order ◽  
Pseudo First Order

In the present paper, the adsorption characteristics of aniline onto KSF montmorillonite from aqueous solution were investigated. Experiments were conducted at various pH values, temperatures, ionic strength and surfactant concentrations. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were adopted to investigate the rate parameters, and the pseudo-second-order equation was proved to be able to successfully predict whole process. Optimal adsorption pH was determined at 3.6. Among the selected models (linear, Langmuir, Freundlich, DR (Dubinin–Radusckevich) models), linear and DR models were found to be better fit the experimental data, which revealed the physisorption nature of the adsorption process. Meanwhile, with the increase of reaction temperatures, the adsorption capacity decreased. The results of the calculated thermodynamic parameters demonstrated that the adsorption was an exothermic, spontaneous and unfavorable process.

scholarly journals Harnessing of Newly Tailored Poly (Acrylonitrile)-Starch Nanoparticle Graft Copolymer for Copper Ion Removal via Oximation Reaction

2021 ◽  
Author(s):  
khaled Mostafa ◽  
H. Ameen ◽  
A. Ebessy ◽  
A. El-Sanabary
Keyword(s):  
Experimental Data ◽  
Adsorption Capacity ◽  
Graft Copolymer ◽  
Adsorption Kinetics ◽  
Copper Ions ◽  
Copper Ion ◽  
Second Order ◽  
First Order ◽  
Pseudo Second Order ◽  
Pseudo First Order

Abstract Our recently tailored and fully characterized poly (AN)-starch nanoparticle graft copolymer having 60.1 G.Y. % was used as a starting substrate for copper ions removal from waste water effluent after chemical modification with hydroxyl amine via oximation reaction. This was done to change the abundant nitrile groups in the above copolymer into amidoxime one and the resultant poly (amidoxime) resin was used as adsorbent for copper ions. The resin was characterized qualitatively via rapid vanadium ion test and instrumentally by FT-IR spectra and SEM morphological analysis to confirm the presence of amidoxime groups. The adsorption capacity of the resin was done using the batch technique, whereas the residual copper ions content in the filtrate before and after adsorption was measured using atomic adsorption spectrometry. It was found that the maximum adsorption capacity of poly (amidoxime) resin was 115.2 mg/g at pH 7, 400ppm copper ions concentration and 0.25 g adsorbent at room temperature. The adsorption, kinetics and isothermal study of the process is scrutinized using different variables, such as pH, contact time, copper ion concentration and adsorbent dosage. Different kinetics models comprising the pseudo-first-order and pseudo-second-order have been applied to the experimental data to envisage the adsorption kinetics. It was found from kinetic study that pseudo-second-order rate equation was better than pseudo-first-order supporting the formation of chemisorption process. While, in case of isothermal study, the examination of calculated correlation coefficient (R2) values showed that the Langmuir model provide the best fit to experimental data than Freundlich one.

scholarly journals Adsorption purification of waste water from chromium by ferrite manganese

2020 ◽  
Vol 168 ◽  
pp. 00026
Author(s):  
Liliia Frolova ◽  
Mykola Kharytonov ◽  
Iryna Klimkina ◽  
Oleksandr Kovrov ◽  
Andrii Koveria
Keyword(s):  
Adsorption Process ◽  
Uv Spectroscopy ◽  
Second Order ◽  
Waste Waters ◽  
Equilibrium Isotherms ◽  
X Ray ◽  
First Order ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Kinetics Of

Plasma method is used to synthesize manganese ferrite. The basic properties of ferrite are determined by IR spectroscopy, UV spectroscopy, X-ray phase analysis, vibration magnetometry. The paper shows that the use of magnetically controlled sorbent allows to purify waste waters from chromium (III). The process of adsorption of chromium cations (III) is investigated. The kinetics of the process is studied. To describe the equilibrium isotherms, the experimental data are analysed by the models of Langmuir, Freundlich isotherms. Pseudo-first order, pseudo-second-order, and Weber-Morris are used to elucidate the kinetic parameters and mechanism of the adsorption process. It has been established that the removal of Cr (III) cations is described by the pseudo-second order of the Langmuir reaction and mechanism.

A Comparative Study on the Removal of 2,2',4,4'-Tetrabrominated Diphenyl Ether (BDE-47) by Four Different Methods

2014 ◽  
Vol 700 ◽  
pp. 211-215
Author(s):  
Yi Miao Lin ◽  
Ling Yun Li ◽  
Ji Wei Hu ◽  
Ming Yi Fan ◽  
Chao Zhou ◽  
...  
Keyword(s):  
Exchange Resin ◽  
Diphenyl Ether ◽  
Ion Exchange Resin ◽  
Order Equation ◽  
Second Order ◽  
Order Kinetic ◽  
First Order ◽  
Atomic Force ◽  
Phase Reduction ◽  
Pseudo Second Order

The zero-valent iron (ZVI) particles were synthesized by the aqueous phase reduction, and the tapping mode image of atomic force microscope (AFM) showed that the diameter of the ZVI particles was in the range of 90 nm - 400 nm. By comparison of the debromination of BDE-47 by sunlight, ZVI, ZVI impregnated activated carbon (ZVI/AC) and ZVI impregnated ion exchange resin (ZVI/IER), the debromination effect was found to descend in the following order: ZVI/IER > ZVI/AC > ZVI > sunlight. Second order and first order kinetic models were used for the fitting of the debromination data of BDE-47. Results show that the debromination data of BDE-47 by the sunlight, ZVI, ZVI/AC and ZVI/IER in the current study are generally best described by the pseudo first order equation. Meanwhile, the debromination data of BDE-47 by the ZVI and ZVI/IER can also be described by the pseudo second order equation.

Study of Fluorescent Dyeing Process and Influence of Mixture Dyes on High-visibility

2015 ◽  
Vol 10 (1) ◽  
pp. 155892501501000
Author(s):  
Mohamed Hamdaoui ◽  
Ahlem Lanouar ◽  
Sabri Halaoua
Keyword(s):  
Fluorescent Dyes ◽  
Second Order ◽  
Disperse Dyes ◽  
Order Model ◽  
Nernst Equation ◽  
First Order ◽  
Dyeing Process ◽  
Pseudo Second Order ◽  
Polyester Dyeing ◽  
Kinetics Of

In this paper, we present the results of an investigation and analysis of an experimental study of fluorescent disperse dyes used for dyeing polyester fabrics to high-visibility colors. This paper describes the results of spectrophotometric color measurements for yellow luminous, red luminous and orange luminous fluorescent dyes and their matching with the requirements of the EN 471 standard. The results of this study showed that the adsorption isotherms of polyester dyeing with fluorescent disperse luminous dyes follow the Nernst equation; the Nernst constants were determined and interpreted. The adsorption kinetics of fluorescent disperse dyes on polyester is studied by using the peudo-first-order model, the pseudo-second-order equation and the intraparticle diffusion equation. The results show that pseudo-second-order models fit well the experimental data with higher average regression coefficients (R2 > 0.98). They also show that high-visibility is influenced by the dye concentration, and that the dye mixtures can affect the high-visibility.

Carica Papaya Seed as a Biosorbent for Removal of Cr (VI) and Ni (II) Ions from Aqueous Solution: Thermodynamics and Kinetic Analysis of Experimental Data

2014 ◽  
Vol 12 (1) ◽  
pp. 91-102 ◽  
Author(s):  
K. Chithra ◽  
Shweta Lakshmi ◽  
Abhishek Jain
Keyword(s):  
Experimental Data ◽  
Carica Papaya ◽  
Standard Free Energy ◽  
Toxic Metal ◽  
Second Order ◽  
Binding Characteristics ◽  
Pseudo Second Order ◽  
Carica Papaya Seed ◽  
Best Fit ◽  
Papaya Seed

Abstract The use of Carica papaya seeds as an adsorbent for decontamination of toxic metal ions like Ni (II) and Cr (VI) in solution was investigated. The maximum biosorption capacities of Cr (VI) and Ni (II) were observed at pH 2 and pH 6 respectively. The experimental isotherm data were analyzed using the Langmuir, Freundlich, Dubinin–Radushkevich and Temkin equations. In order to determine the best fit isotherm, five error analysis methods were used, namely the sum-of-squared errors (SSE), the composite functional error (HYBRID), the Marquardt’s percent standard deviation (MPSD), the average relative error (ARE) and the sum of absolute error (EABS). The error values demonstrated that the Langmuir isotherm model provided the best fit to the experimental data for Cr (VI) and the Freundlich model for Ni (II). Adsorption kinetics data were tested using pseudo-first-order and pseudo-second-order models. Kinetic studies showed that the adsorption followed a pseudo-second-order model. Thermodynamic parameters such as changes of standard free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined. The maximum metal uptake of 5.85 mgg–1 for Cr (VI) and 5.58 mgg–1 for Ni (II) from Langmuir model demonstrates the ability of Carica papaya seed to absorb heavy metals. Fourier transform infrared spectroscopy analysis was used to evaluate the binding characteristics of Carica papaya seed with metals.

Adorption and Kinetics Studies of Baritite on Cr (VI) from Aqueous Solutions

2011 ◽  
Vol 347-353 ◽  
pp. 281-284
Author(s):  
Peng Ge ◽  
Li Juan Wan ◽  
Ya Jing Xu
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Adsorption Kinetics ◽  
Natural Zeolite ◽  
Second Order ◽  
Order Model ◽  
Kinetics Studies ◽  
Pseudo Second Order ◽  
Kinetics Of

Among the investigated clays and minerals (kaolinite, natural zeolite, manual zeolite, bentonite, sepiolite, sepiolite amianthus, tremolite amianthus, vermiculite and baritite), the baritite clay was selected as the optimal adsorbent for aqueous Cr (VI). The Cr (VI) adsorption capacity on baritite clay reached as high as 39.01 mg∙g−1 at 20°C. Then the adsorption kinetics of Cr (VI) by the baritite clay were investigated in details. Results showed that the pseudo-second-order model was a suitable description for the adsorption kinetics and fitted well with the experimental data.

scholarly journals Fabrication of Amino Functionalized Magnetic Expanded Graphite Nanohybrids for Application in Removal of Ag(I) from Aqueous Solution

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Ying-Xia Ma ◽  
Yong-Xin Ruan ◽  
Dan Xing ◽  
Xue-Yan Du ◽  
Pei-Qing La
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Expanded Graphite ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
One Pot ◽  
X Ray ◽  
Pseudo Second Order

Ethylenediamine functionalized magnetic expanded graphite decorated with Fe3O4 nanoparticles (MEG-NH2) was fabricated by one-pot solvothermal method. The as-prepared MEG-NH2 nanohybrids were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and Zeta potential analyzer. The effects of Fe3O4 content in MEG-NH2 nanohybrids, pH, initial concentration, contact time, and dosage on adsorption properties of the MEG-NH2 nanohybrids for Ag(I) from aqueous solution were investigated by batch experiments. The pseudo-first-order and the pseudo-second-order kinetic models were utilized to study adsorption kinetics. The experimental data was also analyzed with Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models. The results show that Ag(I) was reduced to silver in the process of the adsorption by MEG-NH2 nanohybrids; the experimental data was better fitted to pseudo-second-order model and Langmuir isotherm model which revealed that the adsorption process was a chemical adsorption by the formation of silver on the surface of MEG-NH2 nanohybrids.

Sign in / Sign up

Export Citation Format

Share Document