scholarly journals Aluminum Nitride Transition Layer for Power Electronics Applications Grown by Plasma-Enhanced Atomic Layer Deposition

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 406 ◽  
Author(s):  
Heli Seppänen ◽  
Iurii Kim ◽  
Jarkko Etula ◽  
Evgeniy Ubyivovk ◽  
Alexei Bouravleuv ◽  
...  

Aluminum nitride (AlN) films have been grown using novel technological approaches based on plasma-enhanced atomic layer deposition (PEALD) and in situ atomic layer annealing (ALA). The growth of AlN layers was carried out on Si<100> and Si<111> substrates at low growth temperature. The investigation of crystalline quality of samples demonstrated that PEALD grown layers were polycrystalline, but ALA treatment improved their crystallinity. A thick polycrystalline AlN layer was successfully regrown by metal-organic chemical vapor deposition (MOCVD) on an AlN PEALD template. It opens up the new possibilities for the formation of nucleation layers with improved quality for subsequent growth of semiconductor nitride compounds.

Nanomaterials ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 82
Author(s):  
Taivo Jõgiaas ◽  
Aivar Tarre ◽  
Hugo Mändar ◽  
Jekaterina Kozlova ◽  
Aile Tamm

Chromium (III) oxide is a technologically interesting material with attractive chemical, catalytic, magnetic and mechanical properties. It can be produced by different chemical and physical methods, for instance, by metal–organic chemical vapor deposition, thermal decomposition of chromium nitrate Cr(NO3)3 or ammonium dichromate (NH4)2Cr2O7, magnetron sputtering and atomic layer deposition. The latter method was used in the current work to deposit Cr2O3 thin films with thicknesses from 28 to 400 nm at deposition temperatures from 330 to 465 °C. The phase composition, crystallite size, hardness and modulus of elasticity were measured. The deposited Cr2O3 thin films had different structures from X-ray amorphous to crystalline α-Cr2O3 (eskolaite) structures. The averaged hardness of the films on SiO2 glass substrate varied from 12 to 22 GPa and the moduli were in the range of 76–180 GPa, as determined by nanoindentation. Lower values included some influence from a softer deposition substrate. The results indicate that Cr2O3 could be a promising material as a mechanically protective thin film applicable, for instance, in micro-electromechanical devices.


2019 ◽  
Vol 58 (SC) ◽  
pp. SC1037 ◽  
Author(s):  
Mohd Nazri Abd Rahman ◽  
Abdullah Fadil Sulaiman ◽  
Muhammad I. M. Abdul Khudus ◽  
Kamarul Allif ◽  
Noor Azrina Talik ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document