scholarly journals Flexural Strengthening of Concrete Slab-Type Elements with Textile Reinforced Concrete

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2246 ◽  
Author(s):  
Hyeong-Yeol Kim ◽  
Young-Jun You ◽  
Gum-Sung Ryu ◽  
Kyung-Taek Koh ◽  
Gi-Hong Ahn ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Tensile Test ◽  
Tensile Properties ◽  
Surface Coating ◽  
Strengthening Effect ◽  
Test Results ◽  
Short Fibers ◽  
Textile Reinforced Concrete ◽  
Flexural Strengthening ◽  
The Matrix

This paper deals with flexural strengthening of reinforced concrete (RC) slabs with a carbon textile reinforced concrete (TRC) system. The surface coating treatment was applied to a carbon grid-type textile to increase the bond strength. Short fibers were incorporated into the matrix to mitigate the formation of shrinkage-induced cracks. The tensile properties of the TRC system were evaluated by a direct tensile test with a dumbbell-type grip method. The tensile test results indicated that the effect of the surface coating treatment of the textile on the bonding behavior of the textile within the TRC system was significant. Furthermore, the incorporation of short fibers in the matrix was effective to mitigate shrinkage-induced crack formation and to improve the tensile properties of the TRC system. Six full-scale slab specimens were strengthened with the TRC system and, subsequently, failure tested. The ultimate load-carrying capacity of the strengthened slabs was compared with that of an unstrengthened slab as well as the theoretical solutions. The failure test results indicated that the stiffness and the ultimate flexural capacity of the strengthened slab were at least 112% and 165% greater, respectively, than that of the unstrengthened slab. The test results further indicated that the strengthening effect was not linearly proportional to the amount of textile reinforcement.

scholarly journals Concrete Slab-Type Elements Strengthened with Cast-in-Place Carbon Textile Reinforced Concrete System

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1437
Author(s):  
Hyeong-Yeol Kim ◽  
Young-Jun You ◽  
Gum-Sung Ryu ◽  
Gi-Hong Ahn ◽  
Kyung-Taek Koh
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Surface Coating ◽  
Concrete Slab ◽  
Strengthening Effect ◽  
Reinforcing Bars ◽  
Textile Reinforced Concrete ◽  
Flexural Strengthening ◽  
Flexural Failure ◽  
Rc Slab

Although carbon textile reinforcement widely used to replace the steel reinforcing bars but the bonding strength of carbon textile is generally much smaller than that of common steel bars. This study examines the strengthening effect of concrete slab-type elements strengthened in flexure by carbon textile reinforcement according to the surface coating of textile and the amount of reinforcement. The effect of the surface coating of textile on the bond strength was evaluated through a direct pullout test with four different sizes of coating material. The surface coated specimens developed bond strength approximately twice that of the uncoated specimen. The flexural strengthening effect with respect to the amount of reinforcement was investigated by a series of flexural failure tests on full-scale reinforced concrete (RC) slab specimens strengthened by textile reinforced concrete (TRC) system. The flexural failure test results revealed that the TRC system-strengthened specimens develop load-carrying capacity that is improved to at least 150% compared to the non-strengthened specimen. The strengthening performance was not significantly influenced by the textile coating and was not proportional to the amount of reinforcement when this amount was increased, owing to the change in the failure mode. The outstanding constructability afforded by TRC strengthening was verified through field applications executing TRC strengthening by shotcreting on a concrete box culvert.

scholarly journals Strengthening of Concrete Element with Precast Textile Reinforced Concrete Panel and Grouting Material

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3856
Author(s):  
Young-Jun You ◽  
Hyeong-Yeol Kim ◽  
Gum-Sung Ryu ◽  
Kyung-Taek Koh ◽  
Gi-Hong Ahn ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Bending Test ◽  
Strengthening Effect ◽  
Textile Reinforced Concrete ◽  
Concrete Element ◽  
Rc Structures ◽  
Flexural Strengthening ◽  
Grouting Material ◽  
Rc Slab ◽  
Rc Slabs

Textile reinforced concrete (TRC) has widely been used for strengthening work for deteriorated reinforced concrete (RC) structures. The structural strengthening often requires accelerated construction with the aid of precast or prefabricated elements. This study presents an innovative method to strengthen an RC slab-type element in flexure using a precast panel made of carbon TRC. A total of five RC slabs were fabricated to examine the flexural strengthening effect. Two of them were strengthened with the precast panel and grouting material and another set of two slabs was additionally strengthened by tensile steel reinforcement. The full-scale slab specimens were tested by a three-point bending test and the test results were compared with the theoretical solutions. The results revealed that the ultimate load of the specimens strengthened with the TRC panel increased by at least 1.5 times compared to that of the unstrengthened specimen. The application of the precast TRC panel and grouting material for the strengthening of a prototype RC structure verified its outstanding constructability.

scholarly journals Determination of the Material Properties of the Reinforcement for Textile-Reinforced Concrete Elements

2021 ◽  
Author(s):  
Sergej Rempel ◽  
Marcus Ricker ◽  
Tânia Feiri
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Tensile Test ◽  
Material Properties ◽  
Construction Material ◽  
Gumbel Distribution ◽  
Mean Value ◽  
Elastic Behaviour ◽  
Textile Reinforced Concrete ◽  
Design Values

Abstract Textile-reinforced concrete has emerged in recent years as a new and valuable construction material. The design of textile-reinforced concrete requires knowledge on the mechanical properties of different textile types as well as their reinforcing behaviour under different loading conditions. Conventional load-bearing tests tend to be complex, time-consuming, costly and can even lack consistent specifications. To mitigate such drawbacks, a standardised tensile test for fibre strands was developed aiming at characterising the material properties needed for the design of a textile-reinforced concrete component. For the sake of this study, an epoxy resin-soaked AR-glass reinforcement was considered. The standardised tensile test uses a fibre strand with 160 mm length, which shall be cut out of a textile grid. The results show that the textile reinforcement has a linear-elastic behaviour, and the ultimate tensile strength can be statistically modelled by a Gumbel distribution. Furthermore, the results indicate that the modulus of elasticity is not influenced by the length or the number of fibre strands. Therefore, the mean value from the standardised test can be used for the design purpose. These findings are essential to derive an appropriate partial safety factor for the calculation of the design values of the tensile strength and can be used to determine the failure probability of textile-reinforced concrete components.

scholarly journals Flexural Strengthening of RC Structures with TRC—Experimental Observations, Design Approach and Application

2019 ◽  
Vol 9 (7) ◽  
pp. 1322 ◽  
Author(s):  
Silke Scheerer ◽  
Robert Zobel ◽  
Egbert Müller ◽  
Tilo Senckpiel-Peters ◽  
Angela Schmidt ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Design Model ◽  
Textile Reinforced Concrete ◽  
Bending Tests ◽  
Rc Structures ◽  
Flexural Strengthening ◽  
Reinforced Concrete Slabs ◽  
Open Questions ◽  
Basic Behavior ◽  
Strengthening Method

Today, the need for structural strengthening is more important than ever. Flexural strengthening with textile reinforced concrete (TRC) is a recommendable addition to already proven methods. In order to use this strengthening method in construction practice, a design model is required. This article gives a brief overview of the basic behavior of reinforced concrete slabs strengthened with TRC in bending tests as already observed by various researchers. Based on this, a design model was developed, which is presented in the main part of the paper. In addition to the model, its assumptions and limits are discussed. The paper is supplemented by selected application examples to show the possibilities of the described strengthening method. Finally, the article will give an outlook on open questions and current research.

scholarly journals Flexural and Shear Tests on Reinforced Concrete Bridge Deck Slab Segments with a Textile-Reinforced Concrete Strengthening Layer

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4210 ◽  
Author(s):  
Viviane Adam ◽  
Jan Bielak ◽  
Christian Dommes ◽  
Norbert Will ◽  
Josef Hegger
Keyword(s):  
Reinforced Concrete ◽  
High Performance ◽  
Large Scale ◽  
Shear Failure ◽  
Bridge Deck ◽  
High Strength ◽  
Shear Capacity ◽  
Strengthening Effect ◽  
Textile Reinforced Concrete ◽  
Carbon Fibre Reinforced Polymer

Many older bridges feature capacity deficiencies. This is mainly due to changes in code provisions which came along with stricter design rules and increasing traffic, leading to higher loads on the structure. To address capacity deficiencies of bridges, refined structural analyses with more detailed design approaches can be applied. If bridge assessment does not provide sufficient capacity, strengthening can be a pertinent solution to extend the bridge’s service lifetime. For numerous cases, applying an extra layer of textile-reinforced concrete (TRC) can be a convenient method to achieve the required resistance. Here, carbon fibre-reinforced polymer reinforcement together with a high-performance mortar was used within the scope of developing a strengthening layer for bridge deck slabs, called SMART-DECK. Due to the high tensile strength of the carbon and its resistance to corrosion, a thin layer with high strength and low additional dead load can be realised. While the strengthening effect of TRC for slabs under flexural loading has already been investigated several times, the presented test programme also covered increase in shear capacity, which is the other crucial failure mode to be considered in design. A total of 14 large-scale tests on TRC-strengthened slab segments were tested under static and cyclic loading. The experimental study revealed high increases in capacity for both bending and shear failure.

scholarly journals Effect of TRC and F/TRC Strengthening on the Cracking Behaviour of RC Beams in Bending

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4863
Author(s):  
Edoardo Rossi ◽  
Norbert Randl ◽  
Tamás Mészöly ◽  
Peter Harsányi
Keyword(s):  
Reinforced Concrete ◽  
Reinforced Concrete Beams ◽  
Image Correlation ◽  
Test Results ◽  
Textile Reinforced Concrete ◽  
Limit States ◽  
Beneficial Effects ◽  
Existing Structures ◽  
Increasing Demand ◽  
Ultimate Limit

The increasing demand on the performance of existing structures, together with their degradation, is among the main drivers towards the development of innovative strengthening solutions. While such solutions are generally aimed at increasing the load-bearing capacity of structural elements, serviceability limit states also play an important role in ensuring the performance and durability of the structure. An experimental campaign was performed to assess the cracking behaviour of reinforced concrete beams strengthened with different typologies of Textile-Reinforced Concrete. The specimens were monitored using Digital Image Correlation (DIC) technology in order to obtain a quantitative evaluation of the evolution of the crack pattern throughout the whole test. Results show the beneficial effects of this retrofitting strategy both at ultimate limit states and serviceability limit states, provide detailed insights on the progression of damage in the specimens and highlight how different parameters impact the cracking behaviour of the tested elements.

Experimental and numerical study on short eccentric columns strengthened by textile-reinforced concrete under sustaining load

2017 ◽  
Vol 36 (23) ◽  
pp. 1712-1726 ◽  
Author(s):  
Dejun Liu ◽  
Hongwei Huang ◽  
Jianping Zuo ◽  
Kang Duan ◽  
Yadong Xue ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Numerical Study ◽  
Experimental Program ◽  
Textile Reinforced Concrete ◽  
Eccentric Load ◽  
Element Analysis ◽  
Flexural Strengthening ◽  
Short Columns ◽  
Eccentric Compression ◽  
Adverse Influence

For the eccentric compression structures which cannot be strengthened by wrap method, this paper presents an experimental and numerical study on flexural strengthening by applying textile reinforced concrete at the tensile face. Seven short columns were constructed and tested under eccentric load. One of the columns did not receive any strengthening and was used as the control column, whereas the rest six were externally upgraded by textile-reinforced concrete layers. The main parameters taken into account covered: (a) type of mortar, (b) preload level, and (c) number of textile-reinforced concrete layers. Besides the experimental program, a numerical investigation utilizing non-linear finite element analysis was carried out and a good agreement was obtained between the experimental and numerical results. Further, the numerical analysis was extended to additional cases to deepen the understanding of flexural-enhancing mechanism . It is concluded that textile-reinforced concrete substantially increases the flexural capacity of the eccentric compression columns; the more the textile layer, the greater the gain. However, the preload has an apparently adverse influence on the strengthening effectiveness, as it causes the strain loss of the textile; the bigger the preload level, the more the loss.

Sign in / Sign up

Export Citation Format

Share Document