scholarly journals Design and Manufacturing of a Nd-Doped Phosphate Glass-Based Jewel

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2321
Author(s):  
Diego Pugliese ◽  
Federico Simone Gobber ◽  
Ilaria Forno ◽  
Daniel Milanese ◽  
Marco Actis Grande

This paper reports the results of the designing, manufacturing and characterization of a jewel obtained by means of coupling the dogmas of industrial design to the analytical engineering approach. The key role in the design of the jewel was played by an in-house synthesized Neodymium (Nd)-doped phosphate glass, selected due to its easy handling and capability to change color according to the incident light wavelength. The glass core was covered by a metal alloy to mitigate its relatively high fragility and sensitivity to thermal shock and, at the same time, to highlight and preserve its beauty. The selection of the proper metal alloy, having thermo-mechanical properties compatible with those exhibited by the glass, was carried out by means of Ashby’s maps, a powerful tool commonly adopted in the field of industrial design.

2010 ◽  
Vol 72 ◽  
pp. 46-52 ◽  
Author(s):  
Laurent Royer ◽  
Stéphane Mathieu ◽  
Christophe Liebaut ◽  
Pierre Steinmetz

For energy production and also for the glass industry, finding new refractory alloys which could permit to increase the process temperatures to 1200°C or more is a permanent challenge. Chromium base alloys can be good candidates, considering the melting point of Cr itself, and also its low corrosion rate in molten glass. Two families of alloys have been studied for this purpose, Cr-Mo-W and Cr-Ta-X alloys (X= Mo, Si..). A finer selection of compositions has been done, to optimize their chemical and mechanical properties. Kinetics of HT oxidation by air, of corrosion by molten glass and also creep properties of several alloys have been measured up to 1250°C. The results obtained with the best alloys (Cr-Ta base) give positive indications as regards the possibility of their industrial use.


2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Neng-Fu Shih ◽  
Jin-Zhou Chen ◽  
Yeu-Long Jiang

DC power and RF power were introduced into the magnetic controlled sputtering system simultaneously to deposit AZO films in order to get an acceptable deposition rate with high quality transparency conducting thin film. The resistivity decreases with the RF power for the as-deposited samples. The resistivity of 6 × 10−4 Ω-cm and 3.5–4.5 × 10−4 Ω-cm is obtained for the as-deposited sample, and for all annealed samples, respectively. The transmittance of the AZO films with higher substrate temperature is generally above 80% for the incident light wavelength within 400–800 nm. The transmittance of the as-deposited samples reveals a clear blue shift phenomenon. The AZO films present (002) oriented preference as can be seen from the X-ray diffraction curves. All AZO films reveal compressive stress. The annealing process improves the electrical property of AZO films. A significant blue shift phenomenon has been found, which may have a great application for electrode in solar cell.


2021 ◽  
Vol 2103 (1) ◽  
pp. 012174
Author(s):  
E S Kozlova ◽  
V V Kotlyar

Abstract In this paper, the design of a plasmonic lens in gold and silver thin films for focusing the light with radial polarization is presented. Using the finite difference time domain method the optimal parameters of the plasmonic lens design are found. It was shown that the silver plasmonic lens produces a tight focal spot with a full width at half maximum of 0.38 of the incident light wavelength.


2016 ◽  
Vol 254 ◽  
pp. 33-42
Author(s):  
Ioan Catalin Mon ◽  
Mircea Horia Tierean ◽  
Eugen Cicala ◽  
Michel Pilloz ◽  
Iryna Tomashchuk ◽  
...  

This paper studies the ductile iron (DI) weldability using laser welding. For performing an Yb:YAG continuous laser was used, with a maximum power of 6 kW. The parametrical window power (P) - welding speed (S) was explored by carrying out the fusion lines on ductile iron plates without preheating, to determinate areas of weldability (complete penetration, correct geometry) to allow further characterization. The criteria for selection of focus areas were the geometry of the fusion lines and the absence of the welding defects. The unsatisfactory domains were characterized by: collapse of the melted metal, incomplete penetration, low fusion lines quality (geometry, compactness). In present study, several values of power and welding speed have been tested to identify their influence on geometry, compactness of the joints and mechanical properties. As result, the power-welding speed diagram for feasible domains of laser welding was generated.


2010 ◽  
Vol 1245 ◽  
Author(s):  
Manuela Vieira ◽  
M. A. Vieira ◽  
João Costa ◽  
Paula Louro ◽  
Miguel Fernandes ◽  
...  

AbstractIn this paper a light-activated multiplexer/demultiplexer silicon-carbon device is analysed. An electrical model for the device operation is presented and used to compare output signals with experimental data. An algorithm that takes into accounts the voltage and the optical bias controlled sensitivities is developed. The device is a double pi'n/pin a-SiC:H heterostructure with two optical gate connections for light triggering in different spectral regions. Multiple monochromatic pulsed communication channels were transmitted together, each one with a specific bit sequence. The combined optical signal was analyzed by reading out, under different applied voltages and optical bias, the generated photocurrent across the device. Experimental and simulated results show that the output multiplexed signal has a strong nonlinear dependence on the light absorption profile, i.e. on the incident light wavelength, bit rate and intensity under unbalanced light generation of carriers. By switching between positive and negative voltages the input channels can be recovered or removed from the output signal.


2002 ◽  
Vol 11 (01) ◽  
pp. 65-74 ◽  
Author(s):  
VIKTOR A. PODOLSKIY ◽  
ANDREY K. SARYCHEV ◽  
VLADIMIR M. SHALAEV

The electromagnetic field distribution for thin metal nanowires is found, by using the discrete dipole approximation. The plasmon polariton modes in wires are numerically simulated. These modes are found to be dependent on the incident light wavelength and direction of propagation. The existence of localized plasmon modes and strong local field enhancement in percolation nanowire composites is demonstrated. Novel left-handed materials in the near-infrared and visible are proposed based on nanowire composites.


2010 ◽  
Vol 26 (10) ◽  
pp. 786-795 ◽  
Author(s):  
Donald A. Peyrot ◽  
Florent Aptel ◽  
Caroline Crotti ◽  
Florent Deloison ◽  
Simon Lemaire ◽  
...  

mBio ◽  
2017 ◽  
Vol 8 (2) ◽  
Author(s):  
Rosanna Man Wah Chau ◽  
Devaki Bhaya ◽  
Kerwyn Casey Huang

ABSTRACT Environmental cues can stimulate a variety of single-cell responses, as well as collective behaviors that emerge within a bacterial community. These responses require signal integration and transduction, which can occur on a variety of time scales and often involve feedback between processes, for example, between growth and motility. Here, we investigate the dynamics of responses of the phototactic, unicellular cyanobacterium Synechocystis sp. PCC6803 to complex light inputs that simulate the natural environments that cells typically encounter. We quantified single-cell motility characteristics in response to light of different wavelengths and intensities. We found that red and green light primarily affected motility bias rather than speed, while blue light inhibited motility altogether. When light signals were simultaneously presented from different directions, cells exhibited phototaxis along the vector sum of the light directions, indicating that cells can sense and combine multiple signals into an integrated motility response. Under a combination of antagonistic light signal regimes (phototaxis-promoting green light and phototaxis-inhibiting blue light), the ensuing bias was continuously tuned by competition between the wavelengths, and the community response was dependent on both bias and cell growth. The phototactic dynamics upon a rapid light shift revealed a wavelength dependence on the time scales of photoreceptor activation/deactivation. Thus, Synechocystis cells achieve exquisite integration of light inputs at the cellular scale through continuous tuning of motility, and the pattern of collective behavior depends on single-cell motility and population growth. IMPORTANCE The photosynthetic cyanobacterium Synechocystis sp. exhibits phototaxis that is dependent on the incident light wavelength through the action of various photoreceptors. In natural environments, cells experience a set of highly dynamic and complex light inputs, yet how cells transduce multiple or dynamic inputs into motion is unknown. In this study, we measured the phototactic behaviors of single cells and communities as a function of light intensity or when illuminated by combinations of lights of different wavelengths or incidence directions. Responses to a spectrum of light regimes revealed that Synechocystis sp. integrates information about the light environment to tune its phototactic response, which is likely generated by competition among photoreceptors and the degree of wavelength-regulated growth to sensitively control the direction and degree of movement. The photosynthetic cyanobacterium Synechocystis sp. exhibits phototaxis that is dependent on the incident light wavelength through the action of various photoreceptors. In natural environments, cells experience a set of highly dynamic and complex light inputs, yet how cells transduce multiple or dynamic inputs into motion is unknown. In this study, we measured the phototactic behaviors of single cells and communities as a function of light intensity or when illuminated by combinations of lights of different wavelengths or incidence directions. Responses to a spectrum of light regimes revealed that Synechocystis sp. integrates information about the light environment to tune its phototactic response, which is likely generated by competition among photoreceptors and the degree of wavelength-regulated growth to sensitively control the direction and degree of movement.


Sign in / Sign up

Export Citation Format

Share Document