scholarly journals Investigation of Fibers Reinforced Engineered Cementitious Composites Properties Using Quartz Powder

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2428 ◽  
Author(s):  
M. S. Liew ◽  
Muhammad Aswin ◽  
Kamaluddeen Usman Danyaro ◽  
Bashar S. Mohammed ◽  
A. M. Al-Yacouby
Keyword(s):  
Compressive Strength ◽  
Volume Fraction ◽  
High Strength ◽  
Pozzolanic Reaction ◽  
Steel Fibers ◽  
Cementitious Composites ◽  
Strength Ratio ◽  
Quartz Powder ◽  
Engineered Cementitious Composites ◽  
Strength Capacity

In relation to the use of retrofit materials on damaged constructions, application on earthquake-resistant buildings, and for the strengthening and rehabilitation on weakened regions, there is a need for a more superior material than concrete. Application sites include beam-column joints, corbels, link-slabs, deep beams, support regions and dapped-end areas. Fiber reinforced engineered cementitious composites (FR-ECC) can address this issue, because FR-ECC is one of the composite materials that has high strength, ductility and durability. In order to develop FR-ECC, this study was done to investigate the effect of adding quartz powder on the compressive strength capacity and properties of FR-ECC through the use of polyvinyl alcohol (PVA) and steel fibers. The volume fraction of fiber was set to 0%–2%. To support the friendly environment, FR-ECC uses by-product materials such as fly ash and silica fume, with a cement content less than 600 kg/m3. In terms of the experimental investigation on FR-ECC, this work conducted the fresh property tests showing that PVA fibers have quite an influence on ECC workability, due to their hydrophilic behavior. By adjusting the superplasticizer (SP) content, the consistency and high workability of the ECC mixes have been achieved and maintained. The test results indicated that the PVA and steel fibers-based ECC mixes can be classified as self-compacting composites and high early compressive strength composites. Significantly, addition of quartz powder into the ECC mixes increased the compressive strength ratio of the ECC samples up to 1.0747. Furthermore, the steel fiber-based ECC samples exhibited greater compressive strength than the PVA fibers-based ECC samples with the strength ratio of 1.1760. Due to effect of the pozzolanic reaction, the fibers dispersion and orientation in the fresh ECC mixes, so that the cementitious matrices provided the high strength on the FR-ECC samples. During the compression loading, the bulging effect always occurred before the failures of the fibers-based ECC samples. No spalling occurred at the time of rupture and the collapse occurred slowly. Thus, FR-ECC has provided unique characteristics, which will reduce the high cost of maintenance.

Compressive Strength and Splitting Tensile Strength of Steel Fiber Reinforced Ultra High Strength Concrete (SFRC)

2010 ◽  
Vol 34-35 ◽  
pp. 1441-1444 ◽  
Author(s):  
Ju Zhang ◽  
Chang Wang Yan ◽  
Jin Qing Jia
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
Volume Fraction ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Strength Concrete

This paper investigates the compressive strength and splitting tensile strength of ultra high strength concrete containing steel fiber. The steel fibers were added at the volume fractions of 0%, 0.5%, 0.75%, 1.0% and 1.5%. The compressive strength of the steel fiber reinforced ultra high strength concrete (SFRC) reached a maximum at 0.75% volume fraction, being a 15.5% improvement over the UHSC. The splitting tensile strength of the SFRC improved with increasing the volume fraction, achieving 91.9% improvements at 1.5% volume fraction. Strength models were established to predict the compressive and splitting tensile strengths of the SFRC. The models give predictions matching the measurements. Conclusions can be drawn that the marked brittleness with low tensile strength and strain capacities of ultra high strength concrete (UHSC) can be overcome by the addition of steel fibers.

scholarly journals Influence of Hybrid Fibers on Toughness Behavior of High Strength Flowing Concrete

2011 ◽  
Vol 57 (3) ◽  
pp. 249-260 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Hybrid Composite ◽  
High Strength ◽  
Steel Fibers ◽  
Hybrid Fibers ◽  
Static Modulus ◽  
Static Modulus Of Elasticity ◽  
Strength And Toughness

Abstract This study investigates the use of steel fibers and hybrid composite with a total fibers content of 2% on the high strength flowing concrete and determines the density, compressive strength, static modulus of elasticity, flexural strength and toughness indices for the mixes. The results show that the inclusion of more than 0.5% of palm fibers in hybrid fibers mixes reduces the compressive strength. The hybrid fibers can be considered as a promising concept and the replacement of a portion of steel fibers with palm fibers can significantly reduce the density, enhance the flexural strength and toughness. The results also indicates that the use of hybrid fibers (1.5 steel fibers + 0.5% palm fibers) in specimens increases significantly the toughness indices and thus the use of hybrid fibers combinations in reinforced concrete would enhance their flexural toughness & rigidity and enhance their overall performances

Mechanical Properties of Modified Engineered Cementitious Composites (MECC) Incorporating Marble Dust

2021 ◽  
Vol 9 (8) ◽  
pp. 1140-1146
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Bottom Surface ◽  
Cementitious Composites ◽  
Strength Development ◽  
Shape Effect ◽  
Main Concern ◽  
Engineered Cementitious Composites ◽  
Flexure Strength ◽  
Marble Dust

Engineered cementitious composites (ECC) are a type of high-performance fiber reinforced cementitious composite. ECC has different applications in the construction field due to its inherent characteristics of high tensile strain. The main concern regarding ECC is its high cost. The content of cement is high contributing to its cost. In this research work, the cement in ECC is replaced with marble dust and its mechanical properties such as compressive strength and flexure strength have been assessed. For this purpose, both cubes and cylinders were tested at different test ages for finding the compressive strength development with time and observe the shape effect of specimens on the compressive strength of ECC mixes. Beam members were tested for finding the flexure strength of ECC mixes. Deflection gauge was also installed at the mid span on the bottom surface of the beams to find the maximum mid span deflection before failure. The compression test results of both cylinders and cubes revealed that using of marble dust has negative effect on the compressive strength of ECC. The flexure strength result showed that marble dust can be used up to some extent replacing cement will increase the flexure strength. The result of mid span deflection suggests that by incorporating marble dust in ECC, its ductility increases.

scholarly journals Comparative Fracture Properties of Four Fibre Reinforced High Performance Cementitious Composites

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2612
Author(s):  
Piotr Smarzewski
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Fracture Energy ◽  
High Performance ◽  
Volume Fraction ◽  
Experimental Tests ◽  
Cementitious Composites ◽  
Basalt Fibre ◽  
Fracture Properties ◽  
Tensile Splitting Strength

This study investigates the fracture properties of high performance cementitious composites (HPCC) with four different types of fibres and with volume fraction content 3%. The four fibres are steel hooked end (S), polypropylene crimped (PP), basalt chopped (B), and glass (G) fibres. The tests were carried out in accordance with the RILEM recommendations. In order to examine the fresh properties of HPCC the slump flow tests were performed. Twelve fibre reinforced HPCC beam specimens with notch were cast and tested using central point loading experiments. In addition, experimental tests of the compressive strength and splitting tensile strength were carried out. The test results made it possible to obtain representative fracture parameters, such as the equivalent strengths, residual strengths, and fracture energy of fibre reinforced HPCC. The S fibre specimens showed the best performance in terms of workability, compressive strength, tensile splitting strength, and fracture energy at large deflection. On the other hand, G fibre specimens exhibited the best performance in terms of flexural strength, equivalent flexural strength at higher deflection, and residual flexural strength at lower deflection. In terms of equivalent flexural strength at lower deflection and residual flexural strength at higher deflection, basalt fibre specimens performed the best. On the contrary, polypropylene fibre reinforced beam specimens revealed the highest deflection capacity.

Sign in / Sign up

Export Citation Format

Share Document