scholarly journals Cooling Performance Analysis of Outside Fins of the Closed Circuit Axial Piston Transmission

Machines ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 17
Author(s):  
Chen Yang ◽  
Long-jie Yu ◽  
Junhui Zhang ◽  
Jin-yuan Qian
Keyword(s):  
Heat Transfer ◽  
Heat Dissipation ◽  
Mechanical Energy ◽  
Closed Circuit ◽  
Moderate Increase ◽  
Frictional Loss ◽  
Fin Thickness ◽  
Axial Piston ◽  
Positive Effect ◽  
Peak Value

Realizing conversion between fluid power and mechanical energy, the closed circuit axial piston transmission (CCAPT) plays a vital and indispensable role in miscellaneous industries. The frictional loss and leakage loss inside the system give rise to the inevitable temperature rise. In order to prolong the life of the device, a cooling structure on the outside of the CCAPT is designed for promoting heat dissipation. Based on the relevant heat transfer law and the temperature distribution of internal machinery elements, a spiral fin structure is designed at the shell side. With the help of numerical simulation, the effects of fin height, fin pitch, and fin thickness on the thermal performance are studied. The flow field and temperature field on the outside of the fin structure are obtained as a guidance for enhancing heat dissipation effect. Results indicate that the area of rotating elements tend to accumulate heat, where more attention should be paid for a better cooling effect. In addition to this, a moderate increase of fin height, fin pitch and fin thickness has a positive effect on heat transfer enhancement. The peak value of Nusselt number is obtained with a fin height of 7.5 mm, which is about 2.09 times that of the condition without the fin structure. An increase in fin pitch improves both heat transfer performance and comprehensive performance at the same. When fin pitch is 30 mm, Nusselt numberincreases 104% over the original condition.

scholarly journals Diamond-Shaped Extended Fins for Heat Transfer Enhancement in a Double-Pipe Heat Exchanger: An Innovative Design

2021 ◽  
Vol 11 (13) ◽  
pp. 5954
Author(s):  
Muhammad Ishaq ◽  
Amjad Ali ◽  
Muhammad Amjad ◽  
Khalid Saifullah Syed ◽  
Zafar Iqbal
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Exchangers ◽  
Adaptive Finite Element Method ◽  
Transfer Enhancement ◽  
Enhanced Heat Transfer ◽  
Frictional Loss ◽  
Special Cases ◽  
Double Pipe ◽  
Pipe Heat

Heat transfer enhancement in heat exchangers results in thermal efficiency and energy saving. In double-pipe heat exchangers (DPHEs), extended or augmented fins in the annulus of the two concentric pipes, i.e., at the outer surface of the inner pipe, are used to extend the surface of contact for enhancing heat transfer. In this article, an innovative diamond-shaped design of extended fins is proposed for DPHEs. This type of fin is considered for the first time in the design of DPHEs. The triangular-shaped and rectangular-shaped fin designs of DPHE, available in the literature, can be recovered as special cases of the proposed design. An h-adaptive finite element method is employed for the solution of the governing equations. The results are computed for various performance measures against the emerging parameters. The results dictate that the optimal configurations of the diamond-shaped fins in the DPHE for an enhanced heat transfer are recommended as follows: If around 4–6, 8–12, or 16–32 fins are to be placed in the DPHE, then the height of the fins should be 20%, 80%, or 100%, respectively, of the annulus width. If frictional loss of heat is also to be considered, then for fin-heights of 20–80% and 100% of the annulus width, the placement of 4 and 8 diamond-shaped fins, respectively, is recommended for an enhanced heat transfer. These recommendations are for the radii ratio (i.e., the ratio of the inner pipe radius to that of the outer pipe) of 0.25. The recommendations are be modified if the radii ratio is altered.

scholarly journals Influence of Ambient Temperature on Radiative and Convective Heat Dissipation Ratio in Polymer Heat Sinks

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2286
Author(s):  
Jan Kominek ◽  
Martin Zachar ◽  
Michal Guzej ◽  
Erik Bartuli ◽  
Petr Kotrbacek
Keyword(s):  
Heat Transfer ◽  
Ambient Temperature ◽  
Convective Heat ◽  
Heat Dissipation ◽  
High Surface ◽  
Heat Sinks ◽  
Fourth Power ◽  
Molding Process ◽  
Ambient Temperatures ◽  
University Of Technology

Miniaturization of electronic devices leads to new heat dissipation challenges and traditional cooling methods need to be replaced by new better ones. Polymer heat sinks may, thanks to their unique properties, replace standardly used heat sink materials in certain applications, especially in applications with high ambient temperature. Polymers natively dispose of high surface emissivity in comparison with glossy metals. This high emissivity allows a larger amount of heat to be dissipated to the ambient with the fourth power of its absolute surface temperature. This paper shows the change in radiative and convective heat transfer from polymer heat sinks used in different ambient temperatures. Furthermore, the observed polymer heat sinks have differently oriented graphite filler caused by their molding process differences, therefore their thermal conductivity anisotropies and overall cooling efficiencies also differ. Furthermore, it is also shown that a high radiative heat transfer leads to minimizing these cooling efficiency differences between these polymer heat sinks of the same geometry. The measurements were conducted at HEATLAB, Brno University of Technology.

scholarly journals Pool Boiling of Nanofluids on Biphilic Surfaces: An Experimental and Numerical Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 125
Author(s):  
Eduardo Freitas ◽  
Pedro Pontes ◽  
Ricardo Cautela ◽  
Vaibhav Bahadur ◽  
João Miranda ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Numerical Model ◽  
Heat Dissipation ◽  
Numerical Study ◽  
Pool Boiling ◽  
Temperature Drop ◽  
Surface Cooling ◽  
Average Temperature ◽  
Gold Silver

This study addresses the combination of customized surface modification with the use of nanofluids, to infer on its potential to enhance pool-boiling heat transfer. Hydrophilic surfaces patterned with superhydrophobic regions were developed and used as surface interfaces with different nanofluids (water with gold, silver, aluminum and alumina nanoparticles), in order to evaluate the effect of the nature and concentration of the nanoparticles in bubble dynamics and consequently in heat transfer processes. The main qualitative and quantitative analysis was based on extensive post-processing of synchronized high-speed and thermographic images. To study the nucleation of a single bubble in pool boiling condition, a numerical model was also implemented. The results show an evident benefit of using biphilic patterns with well-established distances between the superhydrophobic regions. This can be observed in the resulting plot of the dissipated heat flux for a biphilic pattern with seven superhydrophobic spots, δ = 1/d and an imposed heat flux of 2132 w/m2. In this case, the dissipated heat flux is almost constant (except in the instant t* ≈ 0.9 when it reaches a peak of 2400 W/m2), whilst when using only a single superhydrophobic spot, where the heat flux dissipation reaches the maximum shortly after the detachment of the bubble, dropping continuously until a new necking phase starts. The biphilic patterns also allow a controlled bubble coalescence, which promotes fluid convection at the hydrophilic spacing between the superhydrophobic regions, which clearly contributes to cool down the surface. This effect is noticeable in the case of employing the Ag 1 wt% nanofluid, with an imposed heat flux of 2132 W/m2, where the coalescence of the drops promotes a surface cooling, identified by a temperature drop of 0.7 °C in the hydrophilic areas. Those areas have an average temperature of 101.8 °C, whilst the average temperature of the superhydrophobic spots at coalescence time is of 102.9 °C. For low concentrations as the ones used in this work, the effect of the nanofluids was observed to play a minor role. This can be observed on the slight discrepancy of the heat dissipation decay that occurred in the necking stage of the bubbles for nanofluids with the same kind of nanoparticles and different concentration. For the Au 0.1 wt% nanofluid, a heat dissipation decay of 350 W/m2 was reported, whilst for the Au 0.5 wt% nanofluid, the same decay was only of 280 W/m2. The results of the numerical model concerning velocity fields indicated a sudden acceleration at the bubble detachment, as can be qualitatively analyzed in the thermographic images obtained in this work. Additionally, the temperature fields of the analyzed region present the same tendency as the experimental results.

scholarly journals Study on the Convective Heat Transfer and Fluid Flow of Mini-Channel with High Aspect Ratio of Neutron Production Target

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4020
Author(s):  
Peng Sun ◽  
Yiping Lu ◽  
Jianfei Tong ◽  
Youlian Lu ◽  
Tianjiao Liang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Aspect Ratio ◽  
Optimization Design ◽  
Heat Dissipation ◽  
Neutron Production ◽  
Thermal Design ◽  
Maximum Deviation ◽  
Test Channel ◽  
Production Target

In order to provide a theoretical basis for the thermal design of the neutron production target, flow and heat transfer characteristics are studied by using numerical simulations and experiments. A rectangular mini-channel experimental model consistent with the geometric shape of the heat dissipation structure of neutron production target was established, in which the aspect ratio and gap thickness of the test channel were 53.8:1 and 1.3 mm, respectively. The experimental results indicate that the critical Re of the mini-channel is between 3500 and 4000, and when Re reaches 21,000, Nu can reach 160. The simulation results are in good agreement with the experimental data, and the numerical simulation method can be used for the variable structure optimization design of the target in the later stage. The relationship between the flow pressure drop of the target mini-channel and the aspect ratio and Re is obtained by numerical simulation. The maximum deviation between the correlation and the experimental value is 6%.

The Performance Analysis and Experimental Research of Multiple Oil Ports Axial Piston Pump which Able to Control the Movement of Differential Cylinder Directly in the Closed Circuit

2011 ◽  
Vol 308-310 ◽  
pp. 388-400
Author(s):  
Xiao Gang Zhang ◽  
Long Quan
Keyword(s):  
Digital Simulation ◽  
Flow Distribution ◽  
Closed Circuit ◽  
Piston Pump ◽  
Distribution Area ◽  
Axial Piston Pump ◽  
Hydraulic Pump ◽  
Asymmetric Flow ◽  
New Type ◽  
Axial Piston

In order to realize that an asymmetric flow piston pump can control an asymmetric differential cylinder, a proposal about the application of an asymmetric flow-distributing axial piston pump is put forward. The new type of piston pump can output the flows with two different values to control the movement of the differential cylinder directly in the closed circuit and realize much ideal result of the control of the differential cylinder by a single pump. Also a simulation model of the hydraulic pump is established under the circumstance of SimulationX software, considering the characteristics of the movement of an individual piston, the oil compressibility, and the flow distribution area changed with the rotation angle. The key data of the pump is defined by means of digital simulation. In particular, an analysis is made on the dimension of the unloading groove of the port plate and the characteristics of the flow pulse of the pump. Furthermore, an experimental model pump is manufactured, the basic performances of the pump is tested on the experimental platform at various rotatory speeds such as pressure, flow and noise, in the end the accuracy of the principle is verified.

The 3-D Numerical Simulation of Heat Transfer Process of Finned Copper Tube

2011 ◽  
Vol 393-395 ◽  
pp. 412-415
Author(s):  
Jian Hua Zhong ◽  
Li Ming Jiang ◽  
Kai Feng
Keyword(s):  
Heat Transfer ◽  
Transfer Process ◽  
Theoretical Calculations ◽  
Structural Parameters ◽  
Convection Heat Transfer ◽  
Heat Transfer Process ◽  
Finned Tube ◽  
Copper Tube ◽  
Central Air Conditioning ◽  
Fin Thickness

In this article, finned copper tube used in the central air conditioning was acted as the discussed object. According to the combination with actual processing and theoretical calculations, Five finned tube was selected with typical structural parameters, and established their entity model using Pro/E, then the heat transfer process of finned tube was simulated through the ANSYS, the effect of the fin height, fin thickness and other structure parameters to the heat transfer enhancement of finned tube was researched. Meantime the efficiency of the heat transfer under different convection heat transfer coefficient was also studied.

Numerical Simulation of Temperature Field on Different Surface Structure of Bicycle Brake Pairs

2014 ◽  
Vol 697 ◽  
pp. 235-238
Author(s):  
Gang Wu ◽  
Can Chao Huang ◽  
Hong Ling Qin ◽  
Chun Hua Zhao
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Surface Structure ◽  
Surface Structures ◽  
Temperature Fields ◽  
Transfer Model ◽  
Pair Model ◽  
Layer Composite ◽  
Positive Effect ◽  
Heat Loads

Using the basic principle of heat transfer, tribology and numerical simulation, a two-dimensional heat transfer model of the three-layer composite brake pair materials were established. The temperature fields of brake pairs during the process of friction were analyzed. Applied given heat loads at different time node on the brake pair model, the temperatures of different bicycle brake pairs were compared and analyzed. Results show that the improved surface structures of brake pair have positive effect on decreasing the temperature of contact areas than that of ordinary surface structure.

Numerical Study on the Effect of Inner Tube Position on Heat Transfer Process in Self-Recuperative Radiant Tube

2011 ◽  
Vol 228-229 ◽  
pp. 676-680 ◽  
Author(s):  
Ye Tian ◽  
Xun Liang Liu ◽  
Zhi Wen
Keyword(s):  
Heat Transfer ◽  
Transfer Process ◽  
Numerical Study ◽  
Flame Temperature ◽  
Three Dimensional ◽  
Mathematic Model ◽  
Heat Transfer Process ◽  
Bulk Temperature ◽  
Radiant Tube ◽  
Peak Value

A three-dimensional mathematic model is developed for a 100kw single-end recuperative radiant tube and the simulation is performed with the CFD software FLUENT. Also it is used to investigate the effect of distance between combustion chamber exit and inner tube on heat transfer process. The results suggest that the peak value of combustion flame temperature drops along with the increasing of distance, which leads to low NOX discharging. Also radiant tube surface bulk temperature decreases, which causes radiant tube heating performance losses.

Sign in / Sign up

Export Citation Format

Share Document