scholarly journals Evaluation of Non-Equibiaxial Residual Stresses in Metallic Materials via Instrumented Spherical Indentation

Metals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 440 ◽  
Author(s):  
Guangjian Peng ◽  
Fenglei Xu ◽  
Jianfeng Chen ◽  
Huadong Wang ◽  
Jiangjiang Hu ◽  
...  
Keyword(s):  
Residual Stresses ◽  
Mechanical Performance ◽  
Asymmetry Factor ◽  
Spherical Indentation ◽  
Engineering Structures ◽  
Surface Residual Stresses ◽  
Aa 7075 ◽  
Relative Change ◽  
Non Destructive ◽  
Indentation Imprint

Residual stresses, existed in engineering structures, could significantly influence the mechanical properties of structures. Accurate and non-destructive evaluation of the non-equibiaxial residual stresses in these structures is of great value for predicting their mechanical performance. In this work, investigating the mechanical behaviors of instrumented spherical indentation on stressed samples revealed that non-equibiaxial residual stresses could shift the load-depth curve upwards or downwards and cause the residual indentation imprint to be an elliptical one. Through theoretical, experimental, and finite element (FE) analyses, two characteristic indentation parameters, i.e., the relative change in loading curvature and the asymmetry factor of the residual indentation imprint, were found to have optimal sensitivity to residual stresses at a depth of 0.01R (R is the radius of spherical indenter). With the aid of dimensional analysis and FE simulations, non-equibiaxial residual stresses were quantitatively correlated with these two characteristic indentation parameters. The spherical indentation method was then proposed to evaluate non-equibiaxial residual stress based on these two correlations. Applications were illustrated on metallic samples (AA 7075-T6 and AA 2014-T6) with various introduced stresses. Both the numerical and experimental verifications demonstrated that the proposed method could evaluate non-equibiaxial surface residual stresses with reasonable accuracy.

scholarly journals Mechanical properties of rotary swaged steel components

2021 ◽  
Author(s):  
Dhia Charni ◽  
Svetlana Ortmann-Ishkina ◽  
Marius Herrmann ◽  
Christian Schenck ◽  
Jérémy Epp
Keyword(s):  
Mechanical Properties ◽  
Residual Stresses ◽  
Strain Curve ◽  
Dynamic Mechanical Properties ◽  
Process Conditions ◽  
Forming Process ◽  
Rotary Swaging ◽  
Surface Residual Stresses ◽  
Near Net Shape ◽  
As Stress

AbstractThe radial infeed rotary swaging is widely used as a diameter reduction forming process of axisymmetric workpieces, improving the mechanical properties with excellent near net shape forming. In the present study, rotary swaging experiments with different parameter setups were performed on steel tubes and bars under different material states and several resulting property modifications were investigated such as stress-strain curve, hardness, fatigue strength and surface residual stresses. The results show a significant work hardening induced by the rotary swaging process and an improvement in the static and dynamic mechanical properties was observed. Furthermore, the hardness distribution was homogenous in the cross section of the rotary swaged workpieces. Moreover, depending on the process conditions, different residual stresses distribution were generated along the surface.

Stress Corrosion Cracking (SCC) of Nickel-Base Weld Metals in PWR Primary Water

2013 ◽  
Vol 747-748 ◽  
pp. 723-732 ◽  
Author(s):  
Ru Xiong ◽  
Ying Jie Qiao ◽  
Gui Liang Liu
Keyword(s):  
Residual Stresses ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Surface Condition ◽  
Cold Work ◽  
Corrosion Cracking ◽  
Pressurized Water ◽  
Weld Metals ◽  
Surface Residual Stresses ◽  
Primary Water

This discussion reviewed the occurrence of stress corrosion cracking (SCC) of alloys 182 and 82 weld metals in primary water (PWSCC) of pressurized water reactors (PWR) from both operating plants and laboratory experiments. Results from in-service experience showed that more than 340 Alloy 182/82 welds have sustained PWSCC. Most of these cases have been attributed to the presence of high residual stresses produced during the manufacture aside from the inherent tendency for Alloy 182/82 to sustain SCC. The affected welds were not subjected to a stress relief heat treatment with adjacent low alloy steel components. Results from laboratory studies indicated that time-to-cracking of Alloy 82 was a factor of 4 to 10 longer than that for Alloy 182. PWSCC depended strongly on the surface condition, surface residual stresses and surface cold work, which were consistent with the results of in-service failures. Improvements in the resistance of advanced weld metals, Alloys 152 and 52, to PWSCC were discussed.

The Compliance Method for Measurement of Near Surface Residual Stresses—Analytical Background

1994 ◽  
Vol 116 (4) ◽  
pp. 550-555 ◽  
Author(s):  
M. Gremaud ◽  
W. Cheng ◽  
I. Finnie ◽  
M. B. Prime
Keyword(s):  
Numerical Simulation ◽  
Residual Stresses ◽  
Random Errors ◽  
Residual Stress Field ◽  
Near Surface ◽  
Surface Residual Stresses ◽  
Zero Shift ◽  
Stress States ◽  
The Stability ◽  
Piecewise Functions

Introducing a thin cut from the surface of a part containing residual stresses produces a change in strain on the surface. When the strains are measured as a function of the depth of the cut, residual stresses near the surface can be estimated using the compliance method. In previous work, the unknown residual stress field was represented by a series of continuous polynomials. The present paper shows that for stress states with steep gradients, superior predictions are obtained by using “overlapping piecewise functions” to represent the stresses. The stability of the method under the influence of random errors and a zero shift is demonstrated by numerical simulation.

Influence of Milling Parameters on Surface Residual Stresses of 7050-T7451 Aluminum Alloy

2012 ◽  
Vol 723 ◽  
pp. 208-213 ◽  
Author(s):  
Yi Wan ◽  
Chen Li ◽  
Zhan Qiang Liu ◽  
Shu Feng Sun
Keyword(s):  
Aluminum Alloy ◽  
Residual Stresses ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Milling Process ◽  
X Ray Diffraction ◽  
Orthogonal Direction ◽  
Mechanical Coupling ◽  
Surface Residual Stresses ◽  
Compressive Residual Stresses

Residual stresses generated in milling process affect the performance of machined components. Milling residual stresses correlate closely with the cutting parameters. In this paper, the generation and distribution of surface residual stresses in milling of aluminum alloy 7050-T7451 was investigated. The cutting speed changes from 300m/min to 3000m/min. In the experiments, the residual stresses on the surface of specimen are detected by X-ray diffraction technique. The result shows that compressive residual stresses are generated when cutting speed is under 500 m/min. In feed and its orthogonal direction, the effect of cutting speed and feed rate on residual stresses is similar. The formation of the residual stresses can be explained by thermo-mechanical coupling effects.

EXPERIMENTALLY VALIDATED SIMULATIONS OF BLIND HOLE DRILLING IN 3D WOVEN CARBON/EPOXY COMPOSITE WITH PROCESSING-INDUCED RESIDUAL STRESSES

2021 ◽  
Author(s):  
ARTURO LEOS ◽  
KOSTIANTYN VASYLEVSKYI ◽  
IGOR TSUKROV ◽  
TODD GROSS ◽  
BORYS DRACH
Keyword(s):  
Residual Stresses ◽  
Epoxy Matrix ◽  
Mechanical Performance ◽  
Matrix Cracking ◽  
Woven Composites ◽  
Hole Drilling ◽  
Blind Hole ◽  
Matrix Cracks ◽  
Numerical Predictions ◽  
3D Woven Composites

Manufacturing-induced residual stresses in carbon/epoxy 3D woven composites arise during cooling after curing due to a large difference in the coefficients of thermal expansion between the carbon fibers and the epoxy matrix. The magnitudes of these stresses appear to be higher in composites with high throughthickness reinforcement and in some cases are sufficient to lead to matrix cracking. This paper presents a numerical approach to simulation of development of manufacturing-induced residual stresses in an orthogonal 3D woven composite unit cell using finite element analysis. The proposed mesoscale modeling combines viscoelastic stress relaxation of the epoxy matrix and realistic reinforcement geometry (based on microtomography and fabric mechanics simulations) and includes imaginginformed interfacial (tow/matrix) cracks. Sensitivity of the numerical predictions to reinforcement geometry and presence of defects is discussed. To validate the predictions, blind hole drilling is simulated, and the predicted resulting surface displacements are compared to the experimentally measured values. The validated model provides an insight into the volumetric distribution of residual stresses in 3D woven composites. The presented approach can be used for studies of residual stress effects on mechanical performance of composites and strategies directed at their mitigation.

Sign in / Sign up

Export Citation Format

Share Document