scholarly journals Rapid and Sensitive Detection of Bisphenol A Based on Self-Assembly

Micromachines ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 41 ◽  
Author(s):  
Haoyue Luo ◽  
Xiaogang Lin ◽  
Zhijia Peng ◽  
Min Song ◽  
Lifeng Jin
Keyword(s):  
Bisphenol A ◽  
Self Assembly ◽  
Limit Of Detection ◽  
Detection Methods ◽  
Self Assembled Monolayer ◽  
Ac Electrokinetics ◽  
Highly Sensitive ◽  
Reproductive Disorder ◽  
Further Development ◽  
Infants And Young Children

Bisphenol A (BPA) is an endocrine disruptor that may lead to reproductive disorder, heart disease, and diabetes. Infants and young children are likely to be vulnerable to the effects of BPA. At present, the detection methods of BPA are complicated to operate and require expensive instruments. Therefore, it is quite vital to develop a simple, rapid, and highly sensitive method to detect BPA in different samples. In this study, we have designed a rapid and highly sensitive biosensor based on an effective self-assembled monolayer (SAM) and alternating current (AC) electrokinetics capacitive sensing method, which successfully detected BPA at nanomolar levels with only one minute. The developed biosensor demonstrates a detection of BPA ranging from 0.028 μg/mL to 280 μg/mL with a limit of detection (LOD) down to 0.028 μg/mL in the samples. The developed biosensor exhibited great potential as a portable BPA biosensor, and further development of this biosensor may also be useful in the detection of other small biochemical molecules.

Sensitive and selective determination of hydroxychloroquine in the presence of uric acid using a new nanostructure self-assembled monolayer modified electrode: optimization by multivariate data analysis

The Analyst ◽  
2014 ◽  
Vol 139 (16) ◽  
pp. 4064-4072 ◽  
Author(s):  
Asma Khoobi ◽  
Sayed Mehdi Ghoreishi ◽  
Mohsen Behpour
Keyword(s):  
Uric Acid ◽  
Self Assembly ◽  
Multivariate Data Analysis ◽  
Covalent Modification ◽  
Carbon Electrode ◽  
Self Assembled Monolayer ◽  
Selective Determination ◽  
Highly Sensitive ◽  
Electrochemical Nanosensor

A highly sensitive electrochemical nanosensor was developed using covalent modification of a glassy carbon electrode (GCE) by self-assembly of a novel Schiff base.

A Rapid and Sensitive Chemiluminescent Immunoassay of Bisphenol a with NSP-SA-NHS-Labeled

2014 ◽  
Vol 707 ◽  
pp. 7-11
Author(s):  
Fan Fan Yang ◽  
Li Xin Zhu ◽  
Long Xu ◽  
Ren Rong Liu ◽  
Yan Fan ◽  
...  
Keyword(s):  
Bisphenol A ◽  
Inhibitory Concentration ◽  
Limit Of Detection ◽  
Uv Spectrum ◽  
Chemiluminescence Immunoassay ◽  
Highly Sensitive ◽  
Chemiluminescent Immunoassay ◽  
Inhibition Curve ◽  
Sensitive Method ◽  
Acridinium Ester

A novel chemiluminescence immunoassay (CLIA) of Bisphenol A (BPA) with the acridinium ester of NSP-SA-NHS-labeled has been developed. In this study, BVA and NSP-SA-NHS had been coupled with BSA, the UV spectrum results indicated the conjugates which were successfully synthesized. Basing on these luminescence data the inhibition curve of BPA was established, then the linear arrang of the curve was between 0.4 ng/ml and 5 ng/ml, the 50% inhibitory concentration (IC50) was 2.3ng/ml, the lowest limit of detection was 0.1ng/ml, which showed it’s an efficient and highly sensitive method.

Clathrin-Inspired Coating and Stabilization of Liposomes by DNA Self-Assembly

2019 ◽  
Author(s):  
Kevin N. Baumann ◽  
Luca Piantanida ◽  
Javier García-Nafría ◽  
Diana Sobota ◽  
Kislon Voïtchovsky ◽  
...  
Keyword(s):  
Self Assembly ◽  
Mechanical Stability ◽  
Lipid Vesicles ◽  
The Self ◽  
Force Microscopy ◽  
Atomic Force ◽  
Cryo Electron Microscopy ◽  
Further Development ◽  
Liposome Surface ◽  
Dna Coating

The self-assembly of the protein clathrin on biological membranes facilitates essential processes of endocytosis in biological systems and has provided a source of inspiration for materials design by the highly ordered structural appearance. By mimicking the architecture of clathrin self-assemblies to coat liposomes with biomaterials, new classes of hybrid carriers can be derived. Here we present a method for fabricating DNA-coated liposomes by hydrophobically anchoring and subsequently growing a DNA network on the liposome surface which structurally mimics clathrin assemblies. Dynamic light scattering (DLS), ζ-potential and cryo-electron microscopy (cryo-EM) measurements independently demonstrate successful DNA coating. Nanomechanical measurements conducted with atomic force microscopy (AFM) show that the DNA coating enhances the mechanical stability of the liposomes relative to uncoated ones. Furthermore, we provide the possibility to reverse the coating process by triggering the disassembly of the DNA coating through a toehold-mediated displacement reaction. Our results describe a straightforward, versatile, and reversible approach for coating and stabilizing lipid vesicles by an interlaced DNA network. This method has potential for further development towards the ordered arrangement of tailored functionalities on the surfaces of liposomes and for applications as hybrid nanocarrier.

Detection of Glucose in Human Serum Based on Silicon Dot Probe

2020 ◽  
Vol 16 (6) ◽  
pp. 744-752
Author(s):  
Kuan Luo ◽  
Xinyu Jiang
Keyword(s):  
Quantum Dots ◽  
Blood Glucose ◽  
Human Serum ◽  
Organic Dyes ◽  
Limit Of Detection ◽  
Fasting Blood Glucose ◽  
Glucose Biosensor ◽  
Metal Nanoclusters ◽  
Glucose Levels ◽  
Highly Sensitive

Background: Diabetes Mellitus (DM) is a major public metabolic disease that influences 366 million people in the world in 2011, and this number is predicted to rise to 552 million in 2030. DM is clinically diagnosed by a fasting blood glucose that is equal or greater than 7 mM. Therefore, the development of effective glucose biosensor has attracted extensive attention worldwide. Fluorescence- based strategies have sparked tremendous interest due to their rapid response, facile operation, and excellent sensitivity. Many fluorescent compounds have been employed for precise analysis of glucose, including quantum dots, noble metal nanoclusters, up-converting nanoparticles, organic dyes, and composite fluorescent microspheres. Silicon dot as promising quantum dots materials have received extensive attention, owing to their distinct advantages such as biocompatibility, low toxicity and high photostability. Methods: MnO2 nanosheets on the Si nanoparticles (NPs) surface serve as a quencher. Si NPs fluorescence can make a recovery by the addition of H2O2, which can reduce MnO2 to Mn2+, and the glucose can thus be monitored based on the enzymatic conversion of glucose by glucose oxidase to generate H2O2. Therefore, the glucose concentration can be derived by recording the fluorescence recovery spectra of the Si NPs. Results: This probe enabled selective detection of glucose with a linear range of 1-100 μg/mL and a limit of detection of 0.98 μg/mL. Compared with the commercial glucometer, this method showed favorable results and convincing reliability. Conclusion: We have developed a novel method based on MnO2 -nanosheet-modified Si NPs for rapid monitoring of blood glucose levels. By combining the highly sensitive H2O2/MnO2 reaction with the excellent photostability of Si NPs, a highly sensitive, selective, and cost-efficient sensing approach for glucose detection has been designed and applied to monitor glucose levels in human serum with satisfactory results.

scholarly journals Computational Design of a Molecularly Imprinted Polymer for the Biomonitoring of the Organophosphorous Metabolite Chlorferron

Biosensors ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 192
Author(s):  
Bakhtiyar Qader ◽  
Issam Hussain ◽  
Mark Baron ◽  
Rebeca Jiménez-Pérez ◽  
Guzmán Gil-Ramírez ◽  
...  
Keyword(s):  
Biological Samples ◽  
Limit Of Detection ◽  
Computational Design ◽  
Signal Change ◽  
Highly Sensitive ◽  
Limit Of Quantitation ◽  
Molecularly Imprinting Polymers ◽  
Mip Sensor ◽  
Parasitic Mites

Coumaphos is an organophosphorus compound used as insecticide and frequently used by beekeepers for the management of parasitic mites. The most important metabolite, chlorferron (CFN), has been identified in biological samples and foodstuff. The need to quickly identify the presence of typical metabolites, as an indication of interaction with coumaphos has driven the need to produce a highly sensitive electrochemical method for chlorferron analysis, based on molecularly imprinting polymers (MIP) technology. It showed irreversible behaviour with mixed diffusion/adsorption-controlled reactions at the electrode surface. A monoelectronic mechanism of reaction for oxidation has also been suggested. The linear range observed was from 0.158 to 75 µM. Median precision in terms of %RSD around 3% was also observed. For DPV, the limit of detection (LOD) and the limit of quantitation (LOQ) for the CFN-MIP were 0.158 µM and 0.48 µM, respectively. The obtained median % recovery was around 98%. The results were also validated to reference values obtained using GC-MS. Urine and human synthetic plasma spiked with CFN were used to demonstrate the usability of the method in biological samples, showing the potential for biomonitoring. The developed imprinted sensor showed maximum signal change less than 16.8% when related metabolites or pesticide were added to the mix, suggesting high selectivity of the MIP sensor toward CFN molecules. The results from in vitro metabolism of CMP analysed also demonstrates the potential for detection and quantification of CFN in environmental samples. The newly developed CFN-MIP sensor offers similar LoDs than chromatographic methods with shorter analysis time.

scholarly journals A rapid, accurate, scalable, and portable testing system for COVID-19 diagnosis

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Guanhua Xun ◽  
Stephan Thomas Lane ◽  
Vassily Andrew Petrov ◽  
Brandon Elliott Pepa ◽  
Huimin Zhao
Keyword(s):  
Limit Of Detection ◽  
Low Cost ◽  
High Volume ◽  
N Gene ◽  
Testing System ◽  
Target Sequence ◽  
One Pot ◽  
Sequence Detection ◽  
Highly Sensitive ◽  
Speed Accuracy

AbstractThe need for rapid, accurate, and scalable testing systems for COVID-19 diagnosis is clear and urgent. Here, we report a rapid Scalable and Portable Testing (SPOT) system consisting of a rapid, highly sensitive, and accurate assay and a battery-powered portable device for COVID-19 diagnosis. The SPOT assay comprises a one-pot reverse transcriptase-loop-mediated isothermal amplification (RT-LAMP) followed by PfAgo-based target sequence detection. It is capable of detecting the N gene and E gene in a multiplexed reaction with the limit of detection (LoD) of 0.44 copies/μL and 1.09 copies/μL, respectively, in SARS-CoV-2 virus-spiked saliva samples within 30 min. Moreover, the SPOT system is used to analyze 104 clinical saliva samples and identified 28/30 (93.3% sensitivity) SARS-CoV-2 positive samples (100% sensitivity if LoD is considered) and 73/74 (98.6% specificity) SARS-CoV-2 negative samples. This combination of speed, accuracy, sensitivity, and portability will enable high-volume, low-cost access to areas in need of urgent COVID-19 testing capabilities.

scholarly journals Rapid and Sensitive Detection of miRNA Based on AC Electrokinetic Capacitive Sensing for Point-of-Care Applications

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 3985
Author(s):  
Nan Wan ◽  
Yu Jiang ◽  
Jiamei Huang ◽  
Rania Oueslati ◽  
Shigetoshi Eda ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Clinical Diagnostics ◽  
Detection Methods ◽  
Capacitive Sensing ◽  
Application Potential ◽  
Mirna Detection ◽  
Mirna 25 ◽  
Low Sensitivity

A sensitive and efficient method for microRNAs (miRNAs) detection is strongly desired by clinicians and, in recent years, the search for such a method has drawn much attention. There has been significant interest in using miRNA as biomarkers for multiple diseases and conditions in clinical diagnostics. Presently, most miRNA detection methods suffer from drawbacks, e.g., low sensitivity, long assay time, expensive equipment, trained personnel, or unsuitability for point-of-care. New methodologies are needed to overcome these limitations to allow rapid, sensitive, low-cost, easy-to-use, and portable methods for miRNA detection at the point of care. In this work, to overcome these shortcomings, we integrated capacitive sensing and alternating current electrokinetic effects to detect specific miRNA-16b molecules, as a model, with the limit of detection reaching 1.0 femto molar (fM) levels. The specificity of the sensor was verified by testing miRNA-25, which has the same length as miRNA-16b. The sensor we developed demonstrated significant improvements in sensitivity, response time and cost over other miRNA detection methods, and has application potential at point-of-care.

Detection by real-time quaking-induced conversion (RT-QuIC), ELISA, and IHC of chronic wasting disease prion in lymph nodes from Pennsylvania white-tailed deer with specific PRNP genotypes

2021 ◽  
pp. 104063872110214
Author(s):  
Deepanker Tewari ◽  
David Steward ◽  
Melinda Fasnacht ◽  
Julia Livengood
Keyword(s):  
Real Time ◽  
Disease Susceptibility ◽  
Chronic Wasting Disease ◽  
Low Frequency ◽  
The United States ◽  
Detection Methods ◽  
Spongiform Encephalopathy ◽  
Wasting Disease ◽  
Diagnostic Laboratory ◽  
Highly Sensitive

Chronic wasting disease (CWD) is a prion-mediated, transmissible disease of cervids, including deer ( Odocoileus spp.), which is characterized by spongiform encephalopathy and death of the prion-infected animals. Official surveillance in the United States using immunohistochemistry (IHC) and ELISA entails the laborious collection of lymphoid and/or brainstem tissue after death. New, highly sensitive prion detection methods, such as real-time quaking-induced conversion (RT-QuIC), have shown promise in detecting abnormal prions from both antemortem and postmortem specimens. We compared RT-QuIC with ELISA and IHC for CWD detection utilizing deer retropharyngeal lymph node (RLN) tissues in a diagnostic laboratory setting. The RLNs were collected postmortem from hunter-harvested animals. RT-QuIC showed 100% sensitivity and specificity for 50 deer RLN (35 positive by both IHC and ELISA, 15 negative) included in our study. All deer were also genotyped for PRNP polymorphism. Most deer were homozygous at codons 95, 96, 116, and 226 (QQ/GG/AA/QQ genotype, with frequency 0.86), which are the codons implicated in disease susceptibility. Heterozygosity was noticed in Pennsylvania deer, albeit at a very low frequency, for codons 95GS (0.06) and 96QH (0.08), but deer with these genotypes were still found to be CWD prion-infected.

Sign in / Sign up

Export Citation Format

Share Document