scholarly journals Advanced Geomechanical Model to Predict the Impact of CO2-Induced Microstructural Alterations on the Cohesive-Frictional Behavior of Mt. Simon Sandstone

Minerals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 38
Author(s):  
Ange-Therese Akono ◽  
Charles Werth ◽  
Zhuofan Shi ◽  
Kristian Jessen ◽  
Theodore T. Tsotsis
Keyword(s):  
Theoretical Model ◽  
Friction Coefficient ◽  
Yield Surface ◽  
Host Rock ◽  
Mechanical Response ◽  
Co2 Storage ◽  
Scale Model ◽  
Microstructural Alterations ◽  
Underground Injection ◽  
The Impact

We investigated the influence of CO2-induced geochemical reactions on the cohesive-frictional properties of host rock within the context of CO2 storage in a saline aquifer and focused on the Mt. Simon sandstone. The research objective was to model geo-mechanical changes due to host rock exposure to CO2-saturated brine while accounting for heterogeneity, double-scale porosity, and granular structure. We formulated a three-level multi-scale model for host rocks. We conducted scanning electron microscopy analyses to probe the microstructure and grid nanoindentation to measure the mechanical response. We derived new nonlinear strength upscaling solutions to correlate the effective strength characteristics and the macroscopic yield surface to the micro-structure at the nano-, micro-, and meso-scales. Specifically, our theoretical model links CO2-induced microstructural alterations to a reduction in the size of the yield surface, and a drop in the value of the friction coefficient. In turn, regarding the Illinois Basin Decatur Project, the CO2-induced drop in friction coefficient is linked to an increase in the risk of fault slip and a higher probability of induced microseismicity during and after the end of CO2 underground injection operations. The theoretical model presented is essential for the geo-mechanical modeling of CO2 underground injection operations at multiple length-scales.

Investment climate and government turnover in russian regions

2014 ◽  
pp. 88-117 ◽  
Author(s):  
G. Syunyaev ◽  
L. Polishchuk
Keyword(s):  
Economic Development ◽  
Theoretical Model ◽  
Private Sector ◽  
Authoritarian Regimes ◽  
Russian Regions ◽  
Investment Climate ◽  
Regional Data ◽  
Endogenous Property Rights ◽  
The Impact

We study the impact of Russian regional governors’ rotation and their affiliation with private sector firms for the quality of investment climate in Russian regions. A theoretical model presented in the paper predicts that these factors taken together improve “endogenous” property rights under authoritarian regimes. This conclusion is confirmed empirically by using Russian regional data for 2002—2010; early in that period gubernatorial elections had been canceled and replaced by federal government’s appointments. This is an indication that under certain conditions government rotation is beneficial for economic development even when democracy is suppressed.

Regional Variability of Michigan Niagaran Reefs and the Impact on CO2 Storage Resources

2019 ◽  
Author(s):  
Autumn Haagsma ◽  
Andrew Burchwell ◽  
Amber Conner ◽  
Jackie Gerst ◽  
Wayne Goodman ◽  
...  
Keyword(s):  
Co2 Storage ◽  
Regional Variability ◽  
The Impact

Studies on Related ms Magnitude Rate Models in Triangular Wave Unloading Section of Calcium Medium-Fine Sandstone

2010 ◽  
Vol 152-153 ◽  
pp. 164-170
Author(s):  
Jie Liu ◽  
Jian Lin Li ◽  
Ying Xia Li ◽  
Shan Shan Yang ◽  
Ji Fang Zhou ◽  
...  
Keyword(s):  
Mechanical Response ◽  
Strain Curve ◽  
Experimental System ◽  
Constant Term ◽  
Lag Time ◽  
Vertical Force ◽  
Time Segment ◽  
Triangular Wave ◽  
Apparent Modulus ◽  
The Impact

Specific to the improvement in the present research of mechanical response under cyclic loading, this paper, taking the calcareous middle- coarse sandstone as the research subject and the RMT-150C experimental system in which data is recoded by ms magnitude as the platform, develops several related models concerning the unloading rate of triangle waves. The unloading process is divided into lag time segment and non-lag time segment, with criterions and related parameters provided as well. The term apparent elastic modulus is defined. The test data analysis shows that there exist a linear relationship between the apparent modulus and instant vertical force before load damage in non-lag time segment. On the preceding basis, a rate-dependent model of triangular wave un-installation section in non-lag time segment is established. Due to the inability of the loading equipment to accurately input the triangle wave, the average loading rate is amended and a constant term is added into it. The model is proved to be reliable, as the predicted value of the deformation rate and the stress strain curve coincides with measured value. At the same time, the impact of the lag time is pointed out quantitatively and a predication model of lag time segment is set up.

scholarly journals Theoretical Studies of the Interaction between Screw Surface and Material in the Mixer

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 962
Author(s):  
Andrzej Marczuk ◽  
Vasily Sysuev ◽  
Alexey Aleshkin ◽  
Petr Savinykh ◽  
Nikolay Turubanov ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
High Efficiency ◽  
Animal Feed ◽  
Structural Features ◽  
Power Demand ◽  
Friction Coefficients ◽  
Length Unit ◽  
Mixing Chamber ◽  
Size Of Particles ◽  
The Impact

Mixing is one of the most commonly used processes in food, animal feed, chemical, cosmetic, etc., industries. It is supposed to provide high-quality homogenous, nutritious mixtures. To provide appropriate mixing of materials while maintaining the process high efficiency and low energy consumption it is crucial to explore and describe the material flow caused by the movement of mixing elements and the contact between particles. The process of mixing is also affected by structural features of the machine components and the mixing chamber, speed of mixing, and properties of the mixed materials, such as the size of particles, moisture, friction coefficients. Thus, modeling of the phenomena that accompany the process of mixing using the above-listed parameters is indispensable for appropriate implementation of the process. The paper provides theoretical power calculations that take into account the material speed change, the impact of the material friction coefficient on the screw steel surface and the impact of the friction coefficient on the material, taking into account the loading height of the mixing chamber and the chamber loading value. Dependencies between the mixer power and the product degree of fineness, rotational speed of screw friction coefficients, the number of windings per length unit, and width of the screw tape have been presented on the basis of a developed model. It has been found that power increases along with an increase in the value of these parameters. Verification of the theoretical model indicated consistence of the predicted power demand with the power demand determined in tests performed on a real object for values of the assumed, effective loading, which was 65–75%.

Farm wages and public works

2015 ◽  
Vol 8 (1) ◽  
pp. 19-72 ◽  
Author(s):  
Kanika Mahajan
Keyword(s):  
Theoretical Model ◽  
Wage Rate ◽  
Fixed Effects ◽  
Positive Impact ◽  
Wage Growth ◽  
State Level ◽  
Random Allocation ◽  
Farm Sector ◽  
Content Type ◽  
The Impact

Purpose – The purpose of this paper is to examine the impact of National Rural Employment Guarantee Scheme (NREGS) on farm sector wage rate. This identification strategy rests on the assumption that all districts across India would have had similar wage trends in the absence of the program. The author argues that this assumption may not be true due to non-random allocation of districts to the program’s three phases across states and different economic growth paths of the states post the implementation of NREGS. Design/methodology/approach – To control for overall macroeconomic trends, the author allows for state-level time fixed effects to capture the differences in growth trajectories across districts due to changing economic landscape in the parent-state over time. The author also estimates the expected farm sector wage growth due to the increased public work employment provision using a theoretical model. Findings – The results, contrary to the existing studies, do not find support for a significantly positive impact of NREGS treatment on private cultivation wage rate. The theoretical model also shows that an increase in public employment work days explains very little of the total growth in cultivation wage post 2004. Originality/value – This paper looks specifically at farm sector wage growth and the possible impact of NREGS on it, accounting for state specific factors in shaping farm wages. Theoretical estimates are presented to overcome econometric limitations.

scholarly journals Analysis of High-Friction Surface Texture with Respect to Friction and Wear

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 758
Author(s):  
Cibi Pranav ◽  
Minh-Tan Do ◽  
Yi-Chang Tsai
Keyword(s):  
Friction Coefficient ◽  
Surface Texture ◽  
Safety Concern ◽  
Future Research ◽  
Scanning System ◽  
Novel Approach ◽  
Texture Parameters ◽  
Aggregate Loss ◽  
Friction Surfaces ◽  
The Impact

High Friction Surfaces (HFS) are applied to increase friction capacity on critical roadway sections, such as horizontal curves. HFS friction deterioration on these sections is a safety concern. This study deals with characterization of the aggregate loss, one of the main failure mechanisms of HFS, using texture parameters to study its relationship with friction. Tests are conducted on selected HFS spots with different aggregate loss severity levels at the National Center for Asphalt Technology (NCAT) Test Track. Friction tests are performed using a Dynamic Friction Tester (DFT). The surface texture is measured by means of a high-resolution 3D pavement scanning system (0.025 mm vertical resolution). Texture data are processed and analyzed by means of the MountainsMap software. The correlations between the DFT friction coefficient and the texture parameters confirm the impact of change in aggregates’ characteristics (including height, shape, and material volume) on friction. A novel approach to detect the HFS friction coefficient transition based on aggregate loss, inspired by previous works on the tribology of coatings, is proposed. Using the proposed approach, preliminary outcomes show it is possible to observe the rapid friction coefficient transition, similar to observations at NCAT. Perspectives for future research are presented and discussed.

scholarly journals The Impact of Heat Treatment on the Behavior of a Hot-Dip Zinc Coating Applied to Steel During Dry Friction

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 660
Author(s):  
Dariusz Jędrzejczyk ◽  
Elżbieta Szatkowska
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Friction Coefficient ◽  
Dry Friction ◽  
Zinc Coating ◽  
Pin On Disc ◽  
The One ◽  
The Impact ◽  
Coating Hardness ◽  
Anticorrosion Properties

The analyzed topic refers to the wear resistance and friction coefficient changes resulting from heat treatment (HT) of a hot-dip zinc coating deposited on steel. The aim of research was to evaluate the coating behavior during dry friction after HT as a result of microstructure changes and increase the coating hardness. The HT parameters should be determined by taking into consideration, on the one hand, coating wear resistance and, on the other hand, its anticorrosion properties. A hot-dip zinc coating was deposited in industrial conditions (according EN ISO 10684) on disc-shaped samples and the chosen bolts. The achieved results were assessed on the basis of tribological tests (T11 pin-on-disc tester, Schatz®Analyse device, Sindelfingen, Germany), microscopic observations (with the use of optical and scanning microscopy), EDS (point and linear) analysis, and microhardness measurements. It is proved that properly applied HT of a hot-dip zinc coating results in changes in the coating’s microstructure, hardness, friction coefficient, and wear resistance.

scholarly journals Anomalous Laterally Stressed Kinetically Trapped DNA Surface Conformations

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Valery V. Prokhorov ◽  
Nikolay A. Barinov ◽  
Kirill A. Prusakov ◽  
Evgeniy V. Dubrovin ◽  
Maxim D. Frank-Kamenetskii ◽  
...  
Keyword(s):  
Electrostatic Interaction ◽  
Mechanical Response ◽  
Persistence Length ◽  
Strong Impact ◽  
List Type ◽  
Surface Charges ◽  
Monomolecular Films ◽  
Chain Approximation ◽  
The Impact ◽  
Positively Charged

Highlights DNA kinking is inevitable for the highly anisotropic 1D–1D electrostatic interaction with the one-dimensionally periodically charged surface. The double helical structure of the DNA kinetically trapped on positively charged monomolecular films comprising the lamellar templates is strongly laterally stressed and extremely perturbed at the nanometer scale. The DNA kinetic trapping is not a smooth 3D—> 2D conformational flattening but is a complex nonlinear in-plane mechanical response (bending, tensile and unzipping) driven by the physics beyond the scope of the applicability of the linear worm-like chain approximation. Abstract Up to now, the DNA molecule adsorbed on a surface was believed to always preserve its native structure. This belief implies a negligible contribution of lateral surface forces during and after DNA adsorption although their impact has never been elucidated. High-resolution atomic force microscopy was used to observe that stiff DNA molecules kinetically trapped on monomolecular films comprising one-dimensional periodically charged lamellar templates as a single layer or as a sublayer are oversaturated by sharp discontinuous kinks and can also be locally melted and supercoiled. We argue that kink/anti-kink pairs are induced by an overcritical lateral bending stress (> 30 pNnm) inevitable for the highly anisotropic 1D-1D electrostatic interaction of DNA and underlying rows of positive surface charges. In addition, the unexpected kink-inducing mechanical instability in the shape of the template-directed DNA confined between the positively charged lamellar sides is observed indicating the strong impact of helicity. The previously reported anomalously low values of the persistence length of the surface-adsorbed DNA are explained by the impact of the surface-induced low-scale bending. The sites of the local melting and supercoiling are convincingly introduced as other lateral stress-induced structural DNA anomalies by establishing a link with DNA high-force mechanics. The results open up the study in the completely unexplored area of the principally anomalous kinetically trapped DNA surface conformations in which the DNA local mechanical response to the surface-induced spatially modulated lateral electrostatic stress is essentially nonlinear. The underlying rich and complex in-plane nonlinear physics acts at the nanoscale beyond the scope of applicability of the worm-like chain approximation.

Mechanical Response of Porous Copper Manufactured by Lost Carbonate Sintering Process

2007 ◽  
Vol 539-543 ◽  
pp. 1863-1867 ◽  
Author(s):  
X.F. Tao ◽  
Li Ping Zhang ◽  
Y.Y. Zhao
Keyword(s):  
Particle Size ◽  
Flexural Strength ◽  
Relative Density ◽  
Mechanical Response ◽  
Compaction Pressure ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Three Point Bending ◽  
Porous Copper ◽  
The Impact

This paper investigated the mechanical response of porous copper manufactured by LCS under three-point bending and Charpy impact conditions. The effects of the compaction pressure and K2CO3 particle size used in producing the porous copper samples and the relative density of the samples were studied. The apparent modulus, flexural strength and energy absorption capacity in three-point bending tests increased exponentially with increasing relative density. The impact strength was not markedly sensitive to relative density and had values within 7 – 9 kJ/m2 for the relative densities in the range 0.17 – 0.31. The amount of energy absorbed by a porous copper sample in the impact test was much higher than that absorbed in the three-point bending test, impling that loading strain rate had a significant effect on the deformation mechanisms. Increasing compaction pressure and increasing K2CO3 particle size resulted in significant increases in the flexural strength and the bending energy absorption capacity, both owing to the reduced sintering defects.

Sign in / Sign up

Export Citation Format

Share Document