scholarly journals Paper-Based Oil Barrier Packaging using Lignin-Containing Cellulose Nanofibrils

Molecules ◽  
2020 ◽  
Vol 25 (6) ◽  
pp. 1344 ◽  
Author(s):  
Ali H. Tayeb ◽  
Mehdi Tajvidi ◽  
Douglas Bousfield
Keyword(s):  
Food Packaging ◽  
Transmission Rate ◽  
Cellulose Nanofibrils ◽  
Water Vapor Permeability ◽  
Surface Barrier ◽  
Vapor Permeability ◽  
Paper Machine ◽  
Positive Role ◽  
Water Contact ◽  
Oxygen Transmission Rate

Environmental and health concerns are driving the need for new materials in food packaging to replace poly- or perfluorinated compounds, aluminum layers, and petroleum-based polymers. Cellulose nanofibrils (CNF) have been shown by a number of groups to form excellent barrier layers to oxygen and grease. However, the influence of lignin-containing cellulose nanofibrils (LCNF) on film barrier properties has not been well reported. Herein, thin films (16 g/m2) from LCNF and CNF were formed on paper substrates through a filtration technique that should mimic the addition of material at the wet end of a paper machine. Surface, barrier and mechanical attributes of these samples were characterized. The analysis on the surface free energy and water contact angle pointed to the positive role of lignin distribution in inducing a certain degree of water repellency. The observed oxygen transmission rate (OTR) and water vapor permeability (WVP) values of LCNF-coated samples were nearly similar to those with CNF. However, the presence of lignin improved the oil proof performance; these layered designs exhibited an excellent resistance to grease (kit No. 12). The attained papers with LCNF coat were formed into bowl-like containers using metal molds and a facile oven drying protocol to evaluate their resistance to oil penetration over a longer period. The results confirmed the capability of LCNF layer in holding commercially available cooking oils with no evidence of leakage for over five months. Also, an improvement in the tensile strength and elongation at break was observed in the studied papers. Overall, the proposed packaging material possesses viable architecture and can be considered as a fully wood-based alternative for the current fluorocarbon systems.

scholarly journals Renewable cellulosic nanocomposites for food packaging to avoid fossil fuel plastic pollution: a review

2020 ◽  
Author(s):  
Umair Qasim ◽  
Ahmed I. Osman ◽  
Ala’a H. Al-Muhtaseb ◽  
Charlie Farrell ◽  
Mohammed Al-Abri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lignocellulosic Biomass ◽  
Food Packaging ◽  
Transmission Rate ◽  
Barrier Properties ◽  
Environmental Damage ◽  
Vapor Permeability ◽  
Plastic Pollution ◽  
Oxygen Transmission Rate ◽  
Cellulose Nanoparticles

Abstract The extensive use of petroleum-based synthetic and non-biodegradable materials for packaging applications has caused severe environmental damage. The rising demand for sustainable packaging materials has encouraged scientists to explore abundant unconventional materials. For instance, cellulose, extracted from lignocellulosic biomass, has gained attention owing to its ecological and biodegradable nature. This article reviews the extraction of cellulose nanoparticles from conventional and non-conventional lignocellulosic biomass, and the preparation of cellulosic nanocomposites for food packaging. Cellulosic nanocomposites exhibit exceptional mechanical, biodegradation, optical and barrier properties, which are attributed to the nanoscale structure and the high specific surface area, of 533 m2 g−1, of cellulose. The mechanical properties of composites improve with the content of cellulose nanoparticles, yet an excessive amount induces agglomeration and, in turn, poor mechanical properties. Addition of cellulose nanoparticles increases tensile properties by about 42%. Barrier properties of the composites are reinforced by cellulose nanoparticles; for instance, the water vapor permeability decreased by 28% in the presence of 5 wt% cellulose nanoparticles. Moreover, 1 wt% addition of filler decreased the oxygen transmission rate by 21%. We also discuss the eco-design process, designing principles and challenges.

scholarly journals Physico-Mechanical and Antibacterial Properties of PLA/TiO2 Composite Materials Synthesized via Electrospinning and Solution Casting Processes

Coatings ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 525 ◽  
Author(s):  
Shiyi Feng ◽  
Feng Zhang ◽  
Saeed Ahmed ◽  
Yaowen Liu
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Water Solubility ◽  
Antibacterial Properties ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Solution Casting ◽  
Water Contact ◽  
E Coli ◽  
Composites Materials

In this study, PLA/TiO2 composites materials were prepared via electrospinning and solution casting processes. By testing the mechanical properties, water contact angle, water vapor permeability, and solubility of the composite nanofibers and films, the comprehensive performances of the two types of nanocomposites were analyzed. The results show that maximum tensile strengths of 2.71 ± 0.11 MPa and 14.49 ± 0.13 MPa were achieved for the nanofibers and films at a TiO2 content of 0.75 wt.%. Moreover, the addition of TiO2 significantly cut down the water vapor transmittance rate of the nanofibers and films while significantly improving the water solubility. Further, the antibacterial activity increased under UV-A irradiation for a TiO2 nanoparticle content of 0.75 wt.%, and the nanofiber and films exhibited inhibition zones of 4.86 ± 0.50 and 3.69 ± 0.40 mm for E. coli, and 5.98 ± 0.77 and 4.63 ± 0.45 mm for S. aureus, respectively. Overall, the performance of the nanofiber was better than that of the film. Nevertheless, both the nanocomposite membranes satisfied the requirements of food packaging materials.

Effect of Protein Variety on Properties of Gelatin Edible Films

2013 ◽  
Vol 365-366 ◽  
pp. 1040-1045 ◽  
Author(s):  
Qian Nan Xun ◽  
Qiao Lei ◽  
Jian Qiang Bao ◽  
Zhi Ying Huang
Keyword(s):  
Transmission Rate ◽  
Soybean Protein ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Edible Films ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Soybean Protein Isolate ◽  
Oxygen Transmission Rate

Influences of whey protein isolate (WPI), sodium caseinate (NaCas) and soybean protein isolate (SPI) on gelatin (GA) film properties were investigated by comparing with common plastic films. The results suggested that WPI and NaCas caused tensile strength (TS) of GA film increasing from 6.38MPa to 7.17MPa,7.52MPa; water vapor permeability (WVP) decreasing from 18.46*10-13g m-1 s-1 Pa-1 to 17.92*10-13g m-1 s-1,16.46*10-13g m-1 s-1; and resulted in oxygen transmission rate (O2TR) decreasing from 128.315cm3m-2d-10.1MPa-1 to 37.352 cm3m-2d-10.1MPa-1, 38.129 cm3m-2d-10.1MPa-1.WVP of GA films increased 13.2% and O2TR decreased 4.1% as the addition of SPI. NaCas-GA composite films was the optimal group which had significant advantage on Ts, optical properties and barrier properties.

Physical and Barrier Properties of Polylactic Acid/Halloysite Nanotubes-Titanium Dioxide Nanocomposites

2021 ◽  
Vol 1021 ◽  
pp. 280-289
Author(s):  
Abdulkader M. Alakrach ◽  
Awad A. Al-Rashdi ◽  
Mohamed Khalid Al-Omar ◽  
Taha M. Jassam ◽  
Sam Sung Ting ◽  
...  
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Halloysite Nanotubes ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Water Contact ◽  
Film Density

In this study, PLA/TiO2 and PLA/HNTs-TiO2 nanocomposites films were fabricated via solution casting method. By testing the film density, solubility, water contact angle and water vapor permeability, the PLA nanocomposite films, the comprehensive performances of the nanocomposites were analysed. The outcomes demonstrated that maximum film density of PLA/TiO2 and PLA/HNTs-TiO2 nanocomposites films increased gradually with the increasing of nanofiller loadings. Moreover, the incorporation of TiO2 and HNTs-TiO2 significantly decreased the water vapor transmittance rate of the nanocomposite films with a slight priority to the addition of HNTs-TiO2, the water solubility was significantly improved with the addition of both nanofillers. Furthermore, the barrier properties were developed with the addition of both TiO2 and HNTs-TiO2 especially after the addition of low nanofiller loadings. Overall, the performance of the PLA/HNTs-TiO2 nanocomposite films was better than that PLA/TiO2 film. Nevertheless, both of the PLA nanocomposite samples achieved the requests of food packaging applications.

scholarly journals Protein-Based Films and Coatings for Food Industry Applications

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 769
Author(s):  
Vlad Mihalca ◽  
Andreea Diana Kerezsi ◽  
Achim Weber ◽  
Carmen Gruber-Traub ◽  
Jürgen Schmucker ◽  
...  
Keyword(s):  
Food Packaging ◽  
Meat Products ◽  
Water Vapor Permeability ◽  
Food Product ◽  
Edible Films ◽  
Vapor Permeability ◽  
Area Of Interest ◽  
Industry Applications ◽  
Economic Perspectives ◽  
Materials Used

Food packaging is an area of interest not just for food producers or food marketing, but also for consumers who are more and more aware about the fact that food packaging has a great impact on food product quality and on the environment. The most used materials for the packaging of food are plastic, glass, metal, and paper. Still, over time edible films have become widely used for a variety of different products and different food categories such as meat products, vegetables, or dairy products. For example, proteins are excellent materials used for obtaining edible or non-edible coatings and films. The scope of this review is to overview the literature on protein utilization in food packages and edible packages, their functionalization, antioxidant, antimicrobial and antifungal activities, and economic perspectives. Different vegetable (corn, soy, mung bean, pea, grass pea, wild and Pasankalla quinoa, bitter vetch) and animal (whey, casein, keratin, collagen, gelatin, surimi, egg white) protein sources are discussed. Mechanical properties, thickness, moisture content, water vapor permeability, sensorial properties, and suitability for the environment also have a significant impact on protein-based packages utilization.

scholarly journals Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2569
Author(s):  
Mia Kurek ◽  
Nasreddine Benbettaieb ◽  
Mario Ščetar ◽  
Eliot Chaudy ◽  
Maja Repajić ◽  
...  
Keyword(s):  
Food Packaging ◽  
Water Solubility ◽  
Color Change ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Color Changes ◽  
Insoluble Particles ◽  
Polymer Stability ◽  
Food Packaging Films

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.

scholarly journals Upcycling of Vine Shoots: Production of Fillers for PHBV-Based Biocomposite Applications

2020 ◽  
Author(s):  
Grégoire David ◽  
Laurent Heux ◽  
Stéphanie Pradeau ◽  
Nathalie Gontard ◽  
Hélène Angellier-Coussy
Keyword(s):  
Water Vapor ◽  
Gas Phase ◽  
Mechanical Performance ◽  
Low Cost ◽  
Water Vapor Permeability ◽  
Contact Angles ◽  
Vapor Permeability ◽  
Water Contact ◽  
Median Diameter ◽  
Cost Of Materials

Abstract This paper aims at investigating the potential of vine shoots (ViSh) upcycling as fillers in novel poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHBV) based biocomposites. ViSh particles of around 50 µm (apparent median diameter) were obtained combining dry grinding processes, and mixed with PHBV using melt extrusion. Thermal stability and elongation at break of biocomposites were reduced with increasing contents of ViSh particles (10, 20 and 30 wt%), while Young’s modulus and water vapor permeability were increased. It was shown that a surface gas-phase esterification allowed to significantly increase the hydrophobicity of ViSh particles (increase of water contact angles from 59° to 114°), leading to a reduction of 27% in the water vapor permeability of the biocomposite filled with 30 wt% of ViSh. The overall mechanical performance was not impacted by gas-phase esterification, demonstrating that the interfacial adhesion between the virgin ViSh particles and the PHBV matrix was already good and that such filler surface treatment was not required in that case. It was concluded that ViSh particles can be interestingly used as low cost fillers in PHBV-based biocomposites to decrease the overall cost of materials.

scholarly journals Design and Development of Enhanced Antimicrobial Breathable Biodegradable Polymeric Films for Food Packaging Applications

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3527
Author(s):  
Mona M. Abd Al-Ghani ◽  
Rasha A. Azzam ◽  
Tarek M. Madkour
Keyword(s):  
Food Packaging ◽  
Transmission Rate ◽  
Air Permeability ◽  
Optimal Number ◽  
Food Protection ◽  
Oxygen Transmission Rate ◽  
Microporous Films ◽  
Vitro Analysis ◽  
In Vitro Analysis

The principle of breathable food packaging is to provide the optimal number of pores to transfer a sufficient amount of fresh air into the packaging headspace. In this work, antimicrobial microporous eco-friendly polymeric membranes were developed for food packaging. Polylactic acid (PLA) and polycaprolactone (PCL) were chosen as the main packaging polymers for their biodegradability. To develop the microporous films, sodium chloride (NaCl) and polyethylene oxide (PEO) were used as porogenic agents and the membranes were prepared using solvent-casting techniques. The results showed that films with of 50% NaCl and 10% PEO by mass achieved the highest air permeability and oxygen transmission rate (O2TR) with PLA. Meanwhile, blends of 20% PLA and 80% PCL by mass showed the highest air permeability and O2TR at 100% NaCl composition. The microporous membranes were also coated with cinnamaldehyde, a natural antimicrobial ingredient, to avoid the transportation of pathogens through the membranes into the packaged foods. In vitro analysis showed that the biodegradable membranes were not only environmentally friendly but also allowed for maximum food protection through the transportation of sterile fresh air, making them ideal for food packaging applications.

scholarly journals Incorporation of Lipids into Wheat Bran Cellulose/Wheat Gluten Composite Film Improves Its Water Resistance Properties

Membranes ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 18
Author(s):  
Guanghui Shen ◽  
Guoxian Yu ◽  
Hejun Wu ◽  
Shanshan Li ◽  
Xiaoyan Hou ◽  
...  
Keyword(s):  
Composite Film ◽  
Wheat Bran ◽  
Food Packaging ◽  
Water Resistance ◽  
Wheat Gluten ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Water Contact ◽  
Cross Sectional

This work evaluated the improvement effects of lipids incorporation on water resistance of composite biodegradable film prepared with wheat bran cellulose/wheat gluten (WBC/WG) using an alkaline–ethanol film forming system. Four types of lipids, paraffin wax (PW), beeswax (BW), paraffin oil (PO), and oleic acid (OA), were tested. We found that PW, BW, and PO incorporation at 5–20% improved water vapor permeability (WVP) and surface hydrophobicity of prepared films. Particularly, incorporation of 15% BW could best improve the water resistance properties of the film, with the lowest WVP of 0.76 × 10−12 g/cm·s·Pa and largest water contact angle (WCA) of 86.18°. Incorporation of OA led to the decline in moisture barrier properties. SEM images revealed that different lipids incorporation changed the morphology and of the composite film, and cross-sectional morphology indicated BW-incorporated film obtained more uniform and compact structures compared to other films. Moreover, Fourier transform infrared spectra indicated that the incorporation of PW or BW enhanced the molecular interactions between the film components, confirmed by the chemical shift of characteristic peaks at 3277 and 1026 cm−1. Differential scanning calorimetry results revealed that incorporation of PW, BW, and PO increased films’ melting point, decomposition temperatures, and enthalpy values. Furthermore, the presence of most lipids decreased tensile strength and elongation at the break of the film. Overall, the composite film containing 15% BW obtained the most promising water resistance performance and acceptable mechanical properties, and it thus most suitable as a hydrophobic biodegradable material for food packaging.

scholarly journals Formulation and Characterization of Edible Films Based on Organic Mucilage from Mexican Opuntia ficus-indica

Coatings ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 506 ◽  
Author(s):  
Dulce C. González Sandoval ◽  
Brenda Luna Sosa ◽  
Guillermo Cristian Guadalupe Martínez-Ávila ◽  
Humberto Rodríguez Fuentes ◽  
Victor H. Avendaño Abarca ◽  
...  
Keyword(s):  
Water Vapor ◽  
Light Transmission ◽  
Transmission Rate ◽  
Film Formation ◽  
Water Vapor Permeability ◽  
Edible Films ◽  
Solution Viscosity ◽  
Vapor Permeability ◽  
Yellowness Index ◽  
Opuntia Ficus Indica

The consumption of organic products has increased in recent years. One of the most important products in Mexico is nopal. Nopal’s content and properties make the formulation of edible films possible. In this study, we aimed to develop and characterize biodegradable edible films containing mucilage from Opuntia ficus-indica. The mucilage extraction yield, thickness, color, water vapor permeability, light transmission rate, film transparency, solubility, stability of dispersion, and puncture strength were measured. The use of mucilage from different cultivars affected the water vapor permeability (8.40 × 10−11 g·m−1·s−1·Pa−1 for cultivar Villanueva, 3.48 × 10−11 g·m−1·s−1·Pa−1 for Jalpa, and 1.63 × 10−11 g·m−1·s−1·Pa−1 for Copena F1). Jalpa provided the most soluble mucilage with the highest thickness (0.105 mm). Copena F1 provided the clearest film with the greatest transparency (3.81), the best yellowness index, and the highest resistance (4.44 N·mm−1). Furthermore, this film had the best light transmission rate (48.93%). The Copena F1 showed the best film formation solution viscosity. These results indicate that mucilage mixed with pectin is a potential source for the formulation of edible films.

Sign in / Sign up

Export Citation Format

Share Document