scholarly journals Enhanced Stability of Lipid Structures by Dip-Pen Nanolithography on Block-Type MPC Copolymer

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2768
Author(s):  
Hui-Yu Liu ◽  
Ravi Kumar ◽  
Madoka Takai ◽  
Michael Hirtz
Keyword(s):  
Lipid Membranes ◽  
Silicon Oxide ◽  
Lipid Membrane ◽  
Block Type ◽  
Membrane Structures ◽  
Solid Supports ◽  
Biomedical Sensing ◽  
The Stability ◽  
Lipid Structures ◽  
Dip Pen Nanolithography

Biomimetic lipid membranes on solid supports have been used in a plethora of applications, including as biosensors, in research on membrane proteins or as interfaces in cell experiments. For many of these applications, structured lipid membranes, e.g., in the form of arrays with features of different functionality, are highly desired. The stability of these features on a given substrate during storage and in incubation steps is key, while at the same time the substrate ideally should also exhibit antifouling properties. Here, we describe the highly beneficial properties of a 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymer for the stability of supported lipid membrane structures generated by dip-pen nanolithography with phospholipids (L-DPN). The MPC copolymer substrates allow for more stable and higher membrane stack structures in comparison to other hydrophilic substrates, like glass or silicon oxide surfaces. The structures remain highly stable under immersion in liquid and subsequent incubation and washing steps. This allows multiplexed functionalization of lipid arrays with antibodies via microchannel cantilever spotting (µCS), without the need of orthogonal binding tags for each antibody type. The combined properties of the MPC copolymer substrate demonstrate a great potential for lipid-based biomedical sensing and diagnostic platforms.

Stabilization of bilayer lipid membranes on solid supports by trehalose

1996 ◽  
Vol 39 (2) ◽  
pp. 299-302 ◽  
Author(s):  
T. Hianik ◽  
J. Dlugopolsky ◽  
M. Gyeppessova ◽  
B. Sivak ◽  
H.T. Tien ◽  
...  
Keyword(s):  
Lipid Membranes ◽  
Bilayer Lipid Membranes ◽  
Solid Supports ◽  
Bilayer Lipid

scholarly journals Electrochemical Properties of Lipid Membranes Self-Assembled from Bicelles

Membranes ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 11
Author(s):  
Damian Dziubak ◽  
Kamil Strzelak ◽  
Slawomir Sek
Keyword(s):  
Electrochemical Properties ◽  
Self Assembly ◽  
Lipid Membranes ◽  
Lipid Membrane ◽  
Membrane Resistance ◽  
Electrochemical Characteristics ◽  
Freeze Thaw ◽  
Lipid Films ◽  
Supported Lipid Membranes

Supported lipid membranes are widely used platforms which serve as simplified models of cell membranes. Among numerous methods used for preparation of planar lipid films, self-assembly of bicelles appears to be promising strategy. Therefore, in this paper we have examined the mechanism of formation and the electrochemical properties of lipid films deposited onto thioglucose-modified gold electrodes from bicellar mixtures. It was found that adsorption of the bicelles occurs by replacement of interfacial water and it leads to formation of a double bilayer structure on the electrode surface. The resulting lipid assembly contains numerous defects and pinholes which affect the permeability of the membrane for ions and water. Significant improvement in morphology and electrochemical characteristics is achieved upon freeze–thaw treatment of the deposited membrane. The lipid assembly is rearranged to single bilayer configuration with locally occurring patches of the second bilayer, and the number of pinholes is substantially decreased. Electrochemical characterization of the lipid membrane after freeze–thaw treatment demonstrated that its permeability for ions and water is significantly reduced, which was manifested by the relatively high value of the membrane resistance.

scholarly journals Interactions of Linear Analogues of Battacin with Negatively Charged Lipid Membranes

Membranes ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 192
Author(s):  
Kinga Burdach ◽  
Dagmara Tymecka ◽  
Aneta Urban ◽  
Robert Lasek ◽  
Dariusz Bartosik ◽  
...  
Keyword(s):  
Lipid Membranes ◽  
Liquid Crystalline ◽  
Lipid Membrane ◽  
Attenuated Total Reflection ◽  
Gram Positive ◽  
Insertion Depth ◽  
Force Microscopy ◽  
Acyl Chains ◽  
Hydrophobic Portion ◽  
Membrane Fluidization

The increasing resistance of bacteria to available antibiotics has stimulated the search for new antimicrobial compounds with less specific mechanisms of action. These include the ability to disrupt the structure of the cell membrane, which in turn leads to its damage. In this context, amphiphilic lipopeptides belong to the class of the compounds which may fulfill this requirement. In this paper, we describe two linear analogues of battacin with modified acyl chains to tune the balance between the hydrophilic and hydrophobic portion of lipopeptides. We demonstrate that both compounds display antimicrobial activity with the lowest values of minimum inhibitory concentrations found for Gram-positive pathogens. Therefore, their mechanism of action was evaluated on a molecular level using model lipid films mimicking the membrane of Gram-positive bacteria. The surface pressure measurements revealed that both lipopeptides show ability to bind and incorporate into the lipid monolayers, resulting in decreased ordering of lipids and membrane fluidization. Atomic force microscopy (AFM) imaging demonstrated that the exposure of the model bilayers to lipopeptides leads to a transition from the ordered gel phase to disordered liquid crystalline phase. This observation was confirmed by attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) results, which revealed that lipopeptide action causes a substantial increase in the average tilt angle of lipid acyl chains with respect to the surface normal to compensate for lipopeptide insertion into the membrane. Moreover, the peptide moieties in both molecules do not adopt any well-defined secondary structure upon binding with the lipid membrane. It was also observed that a small difference in the structure of a lipophilic chain, altering the balance between hydrophobic and hydrophilic portion of the molecules, results in different insertion depth of the active compounds.

scholarly journals Exosome-derived noncoding RNAs in gastric cancer: functions and clinical applications

2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Xiao-Huan Tang ◽  
Ting Guo ◽  
Xiang-Yu Gao ◽  
Xiao-Long Wu ◽  
Xiao-Fang Xing ◽  
...  
Keyword(s):  
Gastric Cancer ◽  
Noncoding Rnas ◽  
Tumour Microenvironment ◽  
Clinical Applications ◽  
Biological Molecules ◽  
Biological Functions ◽  
Membrane Structures ◽  
Chemical Substances ◽  
Expression Levels ◽  
The Stability

AbstractExosomes are a subpopulation of the tumour microenvironment (TME) that transmit various biological molecules to promote intercellular communication. Exosomes are derived from nearly all types of cells and exist in all body fluids. Noncoding RNAs (ncRNAs) are among the most abundant contents in exosomes, and some ncRNAs with biological functions are specifically packaged into exosomes. Recent studies have revealed that exosome-derived ncRNAs play crucial roles in the tumorigenesis, progression and drug resistance of gastric cancer (GC). In addition, regulating the expression levels of exosomal ncRNAs can promote or suppress GC progression. Moreover, the membrane structures of exosomes protect ncRNAs from degradation by enzymes and other chemical substances, significantly increasing the stability of exosomal ncRNAs. Specific hallmarks within exosomes that can be used for exosome identification, and specific contents can be used to determine their origin. Therefore, exosomal ncRNAs are suitable for use as diagnostic and prognostic biomarkers or therapeutic targets. Regulating the biogenesis of exosomes and the expression levels of exosomal ncRNAs may represent a new way to block or eradicate GC. In this review, we summarized the origins and characteristics of exosomes and analysed the association between exosomal ncRNAs and GC development.

scholarly journals The Structural Integrity of the Model Lipid Membrane during Induced Lipid Peroxidation: The Role of Flavonols in the Inhibition of Lipid Peroxidation

Antioxidants ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 430 ◽  
Author(s):  
Anja Sadžak ◽  
Janez Mravljak ◽  
Nadica Maltar-Strmečki ◽  
Zoran Arsov ◽  
Goran Baranović ◽  
...  
Keyword(s):  
Lipid Peroxidation ◽  
Lipid Bilayers ◽  
Lipid Membranes ◽  
Structural Changes ◽  
Structural Integrity ◽  
Lipid Membrane ◽  
Membrane Properties ◽  
Structural Reorganization ◽  
Unsaturated Lipids ◽  
Oxidative Attack

The structural integrity, elasticity, and fluidity of lipid membranes are critical for cellular activities such as communication between cells, exocytosis, and endocytosis. Unsaturated lipids, the main components of biological membranes, are particularly susceptible to the oxidative attack of reactive oxygen species. The peroxidation of unsaturated lipids, in our case 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), induces the structural reorganization of the membrane. We have employed a multi-technique approach to analyze typical properties of lipid bilayers, i.e., roughness, thickness, elasticity, and fluidity. We compared the alteration of the membrane properties upon initiated lipid peroxidation and examined the ability of flavonols, namely quercetin (QUE), myricetin (MCE), and myricitrin (MCI) at different molar fractions, to inhibit this change. Using Mass Spectrometry (MS) and Fourier Transform Infrared Spectroscopy (FTIR), we identified various carbonyl products and examined the extent of the reaction. From Atomic Force Microscopy (AFM), Force Spectroscopy (FS), Small Angle X-Ray Scattering (SAXS), and Electron Paramagnetic Resonance (EPR) experiments, we concluded that the membranes with inserted flavonols exhibit resistance against the structural changes induced by the oxidative attack, which is a finding with multiple biological implications. Our approach reveals the interplay between the flavonol molecular structure and the crucial membrane properties under oxidative attack and provides insight into the pathophysiology of cellular oxidative injury.

scholarly journals The interplay between lipids and dopamine on α-synuclein oligomerization and membrane binding

2013 ◽  
Vol 33 (5) ◽  
Author(s):  
Chi L. L. Pham ◽  
Roberto Cappai
Keyword(s):  
Lipid Membranes ◽  
Amyloid Fibrils ◽  
Lipid Membrane ◽  
Hydrophobic Interactions ◽  
Membrane Integrity ◽  
Lipid Vesicles ◽  
Helical Conformation ◽  
Unfolded Protein ◽  
Natively Unfolded Protein ◽  
Natively Unfolded

The deposition of α-syn (α-synuclein) as amyloid fibrils and the selective loss of DA (dopamine) containing neurons in the substantia nigra are two key features of PD (Parkinson's disease). α-syn is a natively unfolded protein and adopts an α-helical conformation upon binding to lipid membrane. Oligomeric species of α-syn have been proposed to be the pathogenic species associated with PD because they can bind lipid membranes and disrupt membrane integrity. DA is readily oxidized to generate reactive intermediates and ROS (reactive oxygen species) and in the presence of DA, α-syn form of SDS-resistant soluble oligomers. It is postulated that the formation of the α-syn:DA oligomers involves the cross-linking of DA-melanin with α-syn, via covalent linkage, hydrogen and hydrophobic interactions. We investigate the effect of lipids on DA-induced α-syn oligomerization and studied the ability of α-syn:DA oligomers to interact with lipids vesicles. Our results show that the interaction of α-syn with lipids inhibits the formation of DA-induced α-syn oligomers. Moreover, the α-syn:DA oligomer cannot interact with lipid vesicles or cause membrane permeability. Thus, the formation of α-syn:DA oligomers may alter the actions of α-syn which require membrane association, leading to disruption of its normal cellular function.

Reliability of Electrodeposited Copper and Ecrcvd Siof Films for Multilevel Metallization

1999 ◽  
Vol 565 ◽  
Author(s):  
Seoghyeong Lee ◽  
Yong-An Kim ◽  
Kyoung-Woo Lee ◽  
Seil Sohn ◽  
Young-Il Kim ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Multilayer Structure ◽  
Silicon Oxide ◽  
Electron Cyclotron Resonance ◽  
Chemical Vapor ◽  
Vacuum Furnace ◽  
Electrical Stability ◽  
Metal Interconnects ◽  
The Stability ◽  
Interconnect System

AbstractThe effect of a post plasma treatment on the dielectric properties and reliability of fluorine doped silicon oxide (SiOF) films deposited by electron cyclotron resonance chemical vapor deposition (ECRCVD) was studied. Also, the thermal stability of an electrodeposited Cu / sputtered Ta interconnect system with SiOF intermetal dielectrics was examined by annealing in a vacuum furnace. The stability of the dielectric constant of SiOF films was improved by O2 post plasma treatment. Surface modification by the plasma treatment was effective in prevention of water absorption. The Cu/Ta/SiOF/Si system was thermally stable at least up to 500°C for 3h. For the Cu/Ta/SiOF/Si multilayer structure, the plasma treatment seemed to play a big role in suppressing the interdiffusion between SiOF and metal interconnects. By C-V measurement, the electrical stability of the Cu/Ta/SiOF/Si multilayer structure was found to be stable up to 500°C for 2 h.

Fabrication and Properties Study of the Dielectric Membranes Used as Constructive Basis for Sensitive Elements of Gas Sensors

2015 ◽  
Vol 799-800 ◽  
pp. 994-997 ◽  
Author(s):  
Denis Veselov
Keyword(s):  
Magnetron Sputtering ◽  
Qualitative Analysis ◽  
Gas Sensors ◽  
Silicon Oxide ◽  
Alkaline Solutions ◽  
Reactive Magnetron ◽  
Membrane Structures ◽  
Two Stage ◽  
Study Results ◽  
Semiconductor Gas Sensors

The article presents the properties study results of the dielectric membranes for sensitive elements of semiconductor gas sensors, obtained by different modes of the reactive magnetron sputtering of silicon with application of the two-stage unilateral anisotropic etching of silicon in the organic alkaline solutions. The qualitative analysis of the membranes stability to destructions and deformations in the course of their fabrication and heating is given. Optimum structures and modes of films formation for dielectric membrane structures are determined. The admissible thickness of the thermal silicon oxide underlay, which is does not promote to considerable membranes deformations in the course of their fabrication and heating, is identified.

scholarly journals Mechanistic Understanding from Molecular Dynamics in Pharmaceutical Research 2: Lipid Membrane in Drug Design

2021 ◽  
Vol 14 (10) ◽  
pp. 1062
Author(s):  
Tomasz Róg ◽  
Mykhailo Girych ◽  
Alex Bunker
Keyword(s):  
Molecular Dynamics ◽  
Drug Design ◽  
Active Site ◽  
Lipid Membranes ◽  
Md Simulation ◽  
Lipid Membrane ◽  
Pharmaceutical Research ◽  
Specific Protein ◽  
Design Tool ◽  
Drug Molecules

We review the use of molecular dynamics (MD) simulation as a drug design tool in the context of the role that the lipid membrane can play in drug action, i.e., the interaction between candidate drug molecules and lipid membranes. In the standard “lock and key” paradigm, only the interaction between the drug and a specific active site of a specific protein is considered; the environment in which the drug acts is, from a biophysical perspective, far more complex than this. The possible mechanisms though which a drug can be designed to tinker with physiological processes are significantly broader than merely fitting to a single active site of a single protein. In this paper, we focus on the role of the lipid membrane, arguably the most important element outside the proteins themselves, as a case study. We discuss work that has been carried out, using MD simulation, concerning the transfection of drugs through membranes that act as biological barriers in the path of the drugs, the behavior of drug molecules within membranes, how their collective behavior can affect the structure and properties of the membrane and, finally, the role lipid membranes, to which the vast majority of drug target proteins are associated, can play in mediating the interaction between drug and target protein. This review paper is the second in a two-part series covering MD simulation as a tool in pharmaceutical research; both are designed as pedagogical review papers aimed at both pharmaceutical scientists interested in exploring how the tool of MD simulation can be applied to their research and computational scientists interested in exploring the possibility of a pharmaceutical context for their research.

Sign in / Sign up

Export Citation Format

Share Document