scholarly journals New Pharmaceutical Salts of Trazodone

Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 769
Author(s):  
Jolanta Jaśkowska ◽  
Przemysław Zaręba ◽  
Anna Drabczyk ◽  
Agnieszka Kozak ◽  
Izabela D. Madura ◽  
...  

New pharmaceutically acceptable salts of trazodone (trazodone hydrogen bromide and trazodone 1-hydroxy-2-naphthonic acid) for the treatment of central nervous system disorders are synthesized and described. Although trazodone salts are poorly crystalline, single-crystal X-ray diffraction data for trazodone 1-hydroxy-2-naphthonic acid were collected and analyzed as well as compared to the previously described crystal structure of commercially available trazodone hydrochloride. The powder samples of all new salts were characterized by Fourier transform infrared spectroscopy, X-ray diffraction and 13C solid-state nuclear magnetic resonance spectroscopy. Spectroscopic studies were supported by gauge including projector augmented wave (GIPAW) calculations of carbon chemical shielding constants. The main goal of our research was to find salts with better physicochemical properties and to make an attempt to associate them with both the anion structure and the most prominent interactions exhibited by the protonated trazodone cation. The dissolution profiles of trazodone from tablets prepared from various salts with lactose monohydrate were investigated. The studies revealed that salts with simple anions show a fast release of the drug while the presence of more complex anion, more strongly interacting with the cation, effects a slow-release profile of the active substance and can be used for the preparation of the tables with a delay or prolonged mode of action.

Author(s):  
Jolanta Jaśkowska ◽  
Przemysław Zaręba ◽  
Anna Drabczyk ◽  
Agnieszka Kozak ◽  
Izabela Madura ◽  
...  

New pharmaceutically acceptable salts of trazodone for the treatment of central nervous system disorders are synthesized and described. Each salt (trazodone hydrogen bromide and trazodone 1-hydroxy-2-naphthoate) was obtained by two or three different methods leading to the same crystalline form. Although trazodone salts are poorly crystalline, single-crystal X-ray diffraction data for trazodone 1-hydroxy-2-naphthoate were collected and analyzed as well as compared to the previously described crystal structure of commercially available trazodone hydrochloride. The powder samples of all new salts were characterized by Fourier transform infrared spectroscopy and 13C solid-state nuclear magnetic resonance spectroscopy. Spectroscopic studies were supported by gauge including projector augmented wave (GIPAW) calculations of carbon chemical shielding constants. The main goal of our research was to find salts with better physicochemical properties and to make an attempt to associate them with both the anion structure and the most prominent interactions exhibited by the protonated trazodone cation. The dissolution profiles of trazodone from tablets prepared from various salts with lactose monohydrate were investigated. The studies revealed that salts with simple anions show a fast release of the drug while the presence of more complex anion, more strongly interacting with the cation, effects a slow-release profile of the active substance and can be used for the preparation of the tables with a delay or prolonged mode of action.


IAWA Journal ◽  
1996 ◽  
Vol 17 (4) ◽  
pp. 393-403 ◽  
Author(s):  
Yuki Kondo ◽  
Tomoyuki Fujii ◽  
Yoshioki Hayashi ◽  
Atsushi Kato

Organic crystals were found in tracheid lumina of some samples of Torreya yunnanensis Chen ' L. K. Fu imported from Yunnan, China. Tracheids with crystals were found in short to long tangential bands along the growth ring boundaries. Because the crystals were rapidly dissolved with ethanol and xylene, cross and tangential sections were mounted in de-ionized water without staining and observed by biological, polarised light, and phase-contrast microscopy. The crystals were sublimated under vacuum during routine sample preparation for conventional SEM and only the peripheral parts remained. With the aid of low vacuum-SEM and modified cryo-SEM procedure, the shape of the crystals was revealed. Some were styloid and large enough to fill tracheid lumina, while others were stacked appearing as slates filling tracheid lumina. X-ray diffraction applied to sections and isolated crystals showed that they were single crystals and orientated along the cell wall. UV spectra on isolated crystals and methanol dissolution of crystals suggested that they were composed of phenolic compounds. Crystals that were recrystallized from methanol were analysed by 1H and l3C nuclear magnetic resonance spectroscopy. These two techniques revealed that the major and minor components were o-methoxy cinnamic acid and o-methoxy cinnamic aldehyde.


Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3920
Author(s):  
Martin Weber ◽  
Gábor Balázs ◽  
Alexander V. Virovets ◽  
Eugenia Peresypkina ◽  
Manfred Scheer

By reacting [{Cp‴Fe(CO)2}2(µ,η1:1-P4)] (1) with in situ generated phosphenium ions [Ph2P][A] ([A]− = [OTf]− = [O3SCF3]−, [PF6]−), a mixture of two main products of the composition [{Cp‴Fe(CO)2}2(µ,η1:1-P5(C6H5)2)][PF6] (2a and 3a) could be identified by extensive 31P NMR spectroscopic studies at 193 K. Compound 3a was also characterized by X-ray diffraction analysis, showing the rarely observed bicyclo[2.1.0]pentaphosphapentane unit. At room temperature, the novel compound [{Cp‴Fe}(µ,η4:1-P5Ph2){Cp‴(CO)2Fe}][PF6] (4) is formed by decarbonylation. Reacting 1 with in situ generated diphenyl arsenium ions gives short-lived intermediates at 193 K which disproportionate at room temperature into tetraphenyldiarsine and [{Cp‴Fe(CO)2}4(µ4,η1:1:1:1-P8)][OTf]2 (5) containing a tetracyclo[3.3.0.02,7.03,6]octaphosphaoctane ligand.


Author(s):  
Peng Liu ◽  
Hongbin Zhang ◽  
Sinong Wang ◽  
Hui Yu ◽  
Bingjie Lu ◽  
...  

AbstractThe crystallinity indices (CrI) of Chinese handmade papers were investigated using the X-ray diffraction (XRD) method. Four Chinese handmade papers, Yingchun, Zhuma, Yuanshu and Longxucao papers were used as model substrates of mulberry bark, ramie, bamboo and Eulaliopsis binata papers, respectively. Two forms of the paper samples, paper sheets and their comminuted powders, were used in this study. The results showed that their XRD patterns belong to the cellulose-I type and Iβ dominates the cellulose microstructure of these paper samples. Moreover, it was found that the microstructures and CrIs of cellulose of these papers were changed by the grinding treatment. This work suggested that the sheet form of the handmade papers is suitable to determine CrI by XRD, despite the contribution of non-cellulosic components in the papers. The order of CrIs for these paper sheet samples was Yingchun, Zhuma, Longxucao and Yuanshu papers. Besides CrIs, differences in cross-sectional areas of the crystalline zone of cellulose can be used for comparing different types of handmade papers. It was also found that the CrIs and crystallite size of paper cellulose varied between the sheet samples and the powder samples, illustrating that the pulverisation has a negative influence on the microstructure of the handmade papers.


2017 ◽  
Vol 72 (7) ◽  
pp. 461-474 ◽  
Author(s):  
Saddam Weheabby ◽  
Mohammad A. Abdulmalic ◽  
Evgeny A. Kataev ◽  
Tatiana A. Shumilova ◽  
Tobias Rüffer

AbstractPoly(cyclic) oxamates represent novel and potentially multidentate ligands for coordination chemistry. To obtain them, the treatment of 2-nitroaniline with two equivalents of oxalyl chloride afforded N,N′-bis(2-nitrophenyl)oxalamide (1), and by reduction of 1 with [NH4][CO2H] and Pd/C, N,N′-bis(2-aminophenyl)oxalamide (2, bapoxH6) was synthesized. After the addition of an equimolar amount of oxalyl chloride to a THF solution of 2 and aqueous work-up the 24-membered macrocycle H8L2 was obtained. In analogues experiments, the addition of ethoxalyl and oxalyl chloride to 2 afforded the 36-membered macrocycle H12L3. The addition of Cu(OAc)2·H2O and NaOH to 2 gave rise to the formation of [Cu2(bapoxH4)(OAc)2] (4). The identities of 1, 2 and H8L2 were determined by elemental analysis, IR, NMR spectroscopic studies and by mass spectrometry. The solid state structures of H8L2, H12L3 and 4 have been determined by single-crystal X-ray diffraction studies. Macrocycle H12L3 forms chains through intermolecular hydrogen bonds, while packing of 4 consists of layers held by intermolecular dispersion and hydrogen bond interactions. 24-mer H8L2 forms a cavity with a diameter of about 7.5 Å corresponding to an accessible volume of about 120 Å3 according to the well-established 55% solution and was found to bind bromide and iodide anions selectively.


1992 ◽  
Vol 45 (12) ◽  
pp. 2089 ◽  
Author(s):  
EL Ghisalberti ◽  
BW Skelton ◽  
AH White

The structure of the compound obtained on heating the naturally occurring clerodane furanoditerpene (1) had been formulated as (2) on the basis of spectroscopic studies. A single-crystal X-ray diffraction study on the dihydro derivative of (2) has confirmed this and provides support for the stereochemistry previously assigned to (1) on the basis of chemical evidence.


Author(s):  
Mateusz Gołdyn ◽  
Anna Komasa ◽  
Mateusz Pawlaczyk ◽  
Aneta Lewandowska ◽  
Elżbieta Bartoszak-Adamska

The study of various forms of pharmaceutical substances with specific physicochemical properties suitable for putting them on the market is one of the elements of research in the pharmaceutical industry. A large proportion of active pharmaceutical ingredients (APIs) occur in the salt form. The use of an acidic coformer with a given structure and a suitable pK a value towards purine alkaloids containing a basic imidazole N atom can lead to salt formation. In this work, 2,6-dihydroxybenzoic acid (26DHBA) was used for cocrystallization of theobromine (TBR) and caffeine (CAF). Two novel salts, namely, theobrominium 2,6-dihydroxybenzoate, C7H9N4O2 +·C7H5O4 − (I), and caffeinium 2,6-dihydroxybenzoate, C8H11N4O2 +·C7H5O4 − (II), were synthesized. Both salts were obtained independently by slow evaporation from solution, by neat grinding and also by microwave-assisted slurry cocrystallization. Powder X-ray diffraction measurements proved the formation of the new substances. Single-crystal X-ray diffraction studies confirmed proton transfer between the given alkaloid and 26DHBA, and the formation of N—H...O hydrogen bonds in both I and II. Unlike the caffeine cations in II, the theobromine cations in I are paired by noncovalent N—H...O=C interactions and a cyclic array is observed. As expected, the two hydroxy groups in the 26DHBA anion in both salts are involved in two intramolecular O—H...O hydrogen bonds. C—H...O and π–π interactions further stabilize the crystal structures of both compounds. Steady-state UV–Vis spectroscopy showed changes in the water solubility of xanthines after ionizable complex formation. The obtained salts I and II were also characterized by theoretical calculations, Fourier-transform IR spectroscopy (FT–IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and elemental analysis.


2021 ◽  
Vol 317 ◽  
pp. 81-86
Author(s):  
Syariffah Nurathirah Syed Yaacob ◽  
Md. Rahim Sahar ◽  
Faizani Mohd Noor ◽  
Nur Liyana Amiar Rodin ◽  
Siti Khadijah Mohd Zain ◽  
...  

The spectroscopic performance of Er3+ doped glass at 0.55 mm emission contain different nanoparticles NPs have been comparatively evaluated. Glass containing 1.0 mol % of Er3+ doped with different NPs (Ag, Co and Fe ) have been prepared using melt quenching technique. X-ray diffraction analysis reveals the all the prepared samples are amorphous. The UV-Vis absorption spectra of all glasses show several prominent peaks at 525 nm, 660 nm, 801nm, 982 nm and 959 nm due to transition from ground state 4I15/2 to different excited of 2H11/2, 4F9/2, 4I9/2, 4I11/2, and 4I13/2. The emission of Er3+ at 0.55 mm for glass contain Ag NP shows significant enhancement about 3 folds up to 0.6 mol%. On the other hand, the emission of Er3+ at 0.55 mm for glass containing Fe NPs and Co NPs intensely quench probably due to the energy-transfer from Er3+ ion to NPs and magnetic contributions.


2013 ◽  
Vol 12 (01) ◽  
pp. 1350006
Author(s):  
AHMED E. HANNORA ◽  
FARIED F. HANNA ◽  
LOTFY K. MAREI

Mechanical alloying (MA) method has been used to produce nanocrystallite Mn -15at.% Al alloy. X-ray diffraction (XRD) patterns for the as-milled elemental α- Mn and aluminum powder samples show a mixture of α + β- MnAl phases after 20 h of milling and changes to a dominant β- MnAl phase structure after 50 h. An average crystallite size of 40 nm was determined from Hall–Williamson method analysis after 5 h of milling. Moreover, the thermal analysis results using differential thermal analysis (DTA), suggested a possible phase transformation after 20 h of milling. Isothermal treatments are carried in the temperature range of 450°C to 1000°C. Room-temperature vibrating sample magnetometer (VSM) measurements of the hysteretic response revealed that the saturation magnetization Bs and coercivity Hc for 10 h ball milled sample are ~ 2.1 emu/g and ~ 92 Oe, respectively.


2021 ◽  
Author(s):  
Alexander J. Stirk ◽  
Fabio E. S. Souza ◽  
Jenny Gerster ◽  
Fatemeh M. Mir ◽  
Avedis Karadeolian ◽  
...  

Crystallisations on both the academic and industrial scale often use large volumes of solvent. In order decrease the environmental impact of such processes, new techniques must be discovered that increase the efficiency of the solvents used. Introduced here is a process that combines repurposed industry standard hardware and aspects of mechanochemistry to produce a technique we call “Vapour Assisted Tumbling” (VAT). Pharmaceutical and well-known cocrystals and salts were formed by tumbling the coformers in an atmosphere of vaporised solvent, in this study, methanol (MeOH). This was done inside a custom built analogue of an industrial rotary cone dryer (RCD). It was found that a desired solid form could be obtained as monitored by powder X-ray diffraction and differential scanning calorimetry. By repurposing industrial RCDs, it is feasible that solid forms can be crystallised with both minimal and reusable/recyclable solvent – drastically lowering the environmental impact of such transformations.


Sign in / Sign up

Export Citation Format

Share Document