scholarly journals Effect of Polythiophene Content on Thermomechanical Properties of Electroconductive Composites

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2476
Author(s):  
Katarzyna Bednarczyk ◽  
Tomasz Kukulski ◽  
Ryszard Fryczkowski ◽  
Ewa Schab-Balcerzak ◽  
Marcin Libera
Keyword(s):  
Organic Solar Cells ◽  
Polyamide 6 ◽  
Thermomechanical Properties ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Mechanical And Electrical Properties ◽  
Ft Ir ◽  
Conductive Properties ◽  
The Impact ◽  
Properties Of Composites

The thermal, mechanical and electrical properties of polymeric composites combined using polythiophene (PT) dopped by FeCl3 and polyamide 6 (PA), in the aspect of conductive constructive elements for organic solar cells, depend on the molecular structure and morphology of materials as well as the method of preparing the species. This study was focused on disclosing the impact of the polythiophene content on properties of electrospun fibers. The elements for investigation were prepared using electrospinning applying two substrates. The study revealed the impact of the substrate on the conductive properties of composites. In this study composites exhibited good thermal stability, with T5 values in the range of 230–268 °C that increased with increasing PT content. The prepared composites exhibited comparable PA Tg values, which indicates their suitability for processing. Instrumental analysis of polymers and composites was carried out using Fourier Transform Infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM).

scholarly journals Optimization of the Production Process and Product Quality of Titanate Nanotube–Drug Composites

Nanomaterials ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1406 ◽  
Author(s):  
Yasmin Ranjous ◽  
Géza Regdon ◽  
Klára Pintye-Hódi ◽  
Tamás Varga ◽  
Imre Szenti ◽  
...  
Keyword(s):  
Scanning Calorimetry ◽  
Good Solubility ◽  
Composite Formation ◽  
Alternative Materials ◽  
High Volatility ◽  
Ft Ir ◽  
Fast Disintegrating Tablets ◽  
As Solubility ◽  
Properties Of Composites

Recently, there has been an increasing interest in the application of nanotubular structures for drug delivery. There are several promising results with carbon nanotubes; however, in light of some toxicity issues, the search for alternative materials has come into focus. The objective of the present study was to investigate the influence of the applied solvent on the composite formation of titanate nanotubes (TNTs) with various drugs in order to improve their pharmacokinetics, such as solubility, stability, and bioavailability. Composites were formed by the dissolution of atenolol (ATN) and hydrochlorothiazide (HCT) in ethanol, methanol, 0.01 M hydrochloric acid or in ethanol, 1M sodium hydroxide, dimethylformamide (DMF), dimethyl sulfoxide (DMSO), respectively, and then they were mixed with a suspension of TNTs under sonication for 30 min and vacuum-dried for 24 h. The structural properties of composites were characterized by SEM, TEM, FT-IR, differential scanning calorimetry (DSC), thermogravimetric (TG) analysis, and optical contact angle (OCA) measurements. Drug release was determined from the fast disintegrating tablets using a dissolution tester coupled with a UV–Vis spectrometer. The results revealed that not only the good solubility of the drug in the applied solvent, but also the high volatility of the solvent, is necessary for an optimal composite-formation process.

scholarly journals Mechanical, Thermal and Rheological Properties of Polyethylene-Based Composites Filled with Micrometric Aluminum Powder

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1242
Author(s):  
Olga Mysiukiewicz ◽  
Paulina Kosmela ◽  
Mateusz Barczewski ◽  
Aleksander Hejna
Keyword(s):  
Mechanical Properties ◽  
Melt Flow Index ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Flow Index ◽  
Scanning Calorimetry ◽  
Metal Composites ◽  
Pre Treatment ◽  
The Impact ◽  
Properties Of Composites

Investigations related to polymer/metal composites are often limited to the analysis of the electrical and thermal conductivity of the materials. The presented study aims to analyze the impact of aluminum (Al) filler content (from 1 to 20 wt%) on the rarely investigated properties of composites based on the high-density polyethylene (HDPE) matrix. The crystalline structure, rheological (melt flow index and oscillatory rheometry), thermal (differential scanning calorimetry), as well as static (tensile tests, hardness, rebound resilience) and dynamic (dynamical mechanical analysis) mechanical properties of composites were investigated. The incorporation of 1 and 2 wt% of aluminum filler resulted in small enhancements of mechanical properties, while loadings of 5 and 10 wt% provided materials with a similar performance to neat HDPE. Such results were supported by the lack of disturbances in the rheological behavior of composites. The presented results indicate that a significant content of aluminum filler may be introduced into the HDPE matrix without additional pre-treatment and does not cause the deterioration of composites’ performance, which should be considered beneficial when engineering PE/metal composites.

scholarly journals The Effect of Crystallinity on the Toughness of Cast Polyamide 6 Rods with Different Diameters

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 293
Author(s):  
Miklós Odrobina ◽  
Tamás Deák ◽  
László Székely ◽  
Tamás Mankovits ◽  
Róbert Zsolt Keresztes ◽  
...  
Keyword(s):  
Impact Strength ◽  
Impact Test ◽  
Charpy Impact ◽  
Polyamide 6 ◽  
Degree Of Crystallinity ◽  
Scanning Calorimetry ◽  
Tensile Impact ◽  
Different Diameters ◽  
The Impact ◽  
The Degree Of Crystallinity

The present paper concentrates on the toughness and the degree of crystallinity of the magnesium-catalyzed polyamide 6 rods cast in different diametres, which are commonly used for gear manufacturing. Its toughness cannot be regarded as a constant feature due to the casting technology. The mechanical properties of the semi-finished products are sensitive to the manufactured dimension, e.g., cast diameter, which are investigated by the Charpy impact test and tensile impact test. It is generally accepted that the impact strength and tensile-impact strength correlate with the degree of crystallinity beside many other material’s feature. Crystallinity is evaluated by Differential Scanning Calorimetry. The aim of this study is to determine the relationship between toughness and crystallinity of the magnesium-catalyzed cast PA6 rods with different diameters. For the research cast rods between 40 and 300 mm diameter were selected in seven-dimensional steps. Based on the results, it was found that the toughness depends strongly on the diameter size. Furthermore, it is proved that the crystallinity explains 62.3% of the variation of the Charpy’s impact strengths, while the tensile impact method was not suitable to detect the difference between the test samples.

scholarly journals Influence of Incorporation of Natural Fibers on the Physical, Mechanical, and Thermal Properties of Composites LDPE-Al Reinforced with Fique Fibers

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Miguel A. Hidalgo-Salazar ◽  
Mario F. Muñoz ◽  
José H. Mina
Keyword(s):  
Natural Fibers ◽  
Mechanical And Thermal Properties ◽  
Hot Press ◽  
Scanning Calorimetry ◽  
Aluminum Particles ◽  
Direct Function ◽  
Tetra Pak ◽  
Fique Fibers ◽  
The Impact ◽  
Properties Of Composites

This study shows the effect of the incorporation of natural fique fibers in a matrix formed by low-density polyethylene and aluminum (LDPE-Al) obtained in the recycling process of long-life Tetra Pak packaging. The reinforcement content was 10, 20, and 30% fibers, manufactured by hot-press compression molding of composite boards (LDPE-Al/fique). From the thermogravimetric analysis (TGA) it was determined that the proportions of the LDPE-Al were 75 : 25 w/w. Likewise, it was found that the aluminum particles increased the rigidity of the LDPE-Al, reducing the impact strength compared to LDPE recycled from Tetra Pak without aluminum; besides this, the crystallinity in the LDPE-Al increased with the presence of aluminum, which was observed by differential scanning calorimetry (DSC). The maximum strength and Young’s modulus to tensile and flexural properties increased with the incorporation of the fibers, this increase being a direct function of the amount of reinforcement contained in the material. Finally, a reduction in the density of the compound by the generation of voids at the interface between the LDPE-Al and fique fibers was identified, and there was also a greater water absorption due to weak interphase fiber-matrix and the hydrophilic fibers contained in the material.

Carbon-fibre-reinforced modified cyanate ester winding composites and their thermomechanical properties

2018 ◽  
Vol 31 (2) ◽  
pp. 154-167 ◽  
Author(s):  
Yu Qing Cui ◽  
Zhong Wei Yin
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibre ◽  
Resin Composite ◽  
Thermomechanical Property ◽  
Thermomechanical Properties ◽  
Cyanate Ester ◽  
Resin Matrix ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Sizing Agents

Although the extensive research has expanded on the modification of cyanate ester (CE) resins and the mechanical properties of CE composites, very few studies have been conducted on carbon fibre (CF)/modified CE winding composites and the thermomechanical properties of the composites. In this research, epoxy (EP)-modified novolac cyanate ester (NCE) and bismaleimide (BMI)-modified NCE resins were prepared. The CF/modified CE winding composites were manufactured, and their thermomechanical properties were tested. The optimal winding process was determined, and a preheating technique was implemented. Then, the EP/CE resin (10:90) and the BMI–DBA/CE resin (10:90) were selected as the resin matrix of the winding composite based on the viscosity properties, mechanical properties and thermal analysis (using thermogravimetric analysis and differential scanning calorimetry) of the modified CE resin. The selected resin exhibited good manufacturability at 70°C, good thermal stability and high Tg (above 370°C). The thermomechanical property tests indicate that the modified CE resin composite exhibits an outstanding mechanical strength at room temperature and at high temperatures (130°C, 150°C and 180°C) compared with that of the pure CE resin composite. The reasons for this enhancement can be attributed to a toughening mechanism and the effect of sizing agents on the CFs.

A New Modifier Prepared and it’s Applied in High-Density Polyethylene/Anhydrite Composites

2011 ◽  
Vol 415-417 ◽  
pp. 390-394
Author(s):  
Shao Hui Wang
Keyword(s):  
High Density Polyethylene ◽  
Bending Strength ◽  
Crystallization Rate ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Powder Particles ◽  
Ft Ir ◽  
Anchoring Group ◽  
The Impact

A new Modifier with Silicon radicals as anchoring group and poly(butyl acrylate) as solvatable chain was synthesized and its effect on the properties of HDPE/Anhydrite composites was investigated in this paper. Fourier transmission infrared spectroscopy (FT-IR) results show that the modifier react on the Anhydrite powder particles surface and the modified Anhydrite powder particles particles. compared with that of HDPE/Anhydrite (filled with same non-modified fraction), The impact strength, tensile strength, bending strength and Young’s modulus of modified HDPE/Anhydrite composites increased about 36.6%, 7.5%, 15.6% and 34% respectively. Based on surface analysis by scanning electron microscope (SEM), the Anhydrite powder particles buried well in HDPE matrix when Anhydrite powder particles was coated with the YB modifier. It was found that Anhydrite powder particles significantly increased the crystallization temperature and crystallization rate of HDPE by differential scanning calorimetry (DSC). At same time, through the X-ray diffraction (XRD) found the addition of the YB modifier modified Anhydrite powder particles can not change the formation of crystal HDPE, but can reduce the crystallite size.

Preparation and Characterization of Tetradecanol Microcapsule Phase Change Materials by Emulsion Polymerization

2015 ◽  
Vol 1089 ◽  
pp. 137-141 ◽  
Author(s):  
Xiao Qiu Song ◽  
Long Di Cao ◽  
Dan Dan Xu
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Result Show ◽  
Ft Ir ◽  
Latent Heats ◽  
Test Result

In this study, it was aimed at preparing and characterizating of poly (methyl methacrylate) (PMMA) shell microcapsules containing tetradecanol as phase change materials (PCMs) for thermal energy storage. The tetradecanol microcapsules were characterized by using scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The test result show that the contents of tetradecanol in microcapsules nearly 57.5% and the latent heats of melting and freezing were found to be 120.7 and 118.4 J/g. TGA analyses also indicated that the microPCMs degraded in two steps and have good thermal stability.

Poly(aryl Imino Sulphone)s as Novel High Performance Polymers

2011 ◽  
Vol 217-218 ◽  
pp. 1159-1164
Author(s):  
Guan Jun Chang ◽  
Lin Zhang ◽  
Run Xiong Lin
Keyword(s):  
High Performance ◽  
Condensation Polymerization ◽  
Scanning Calorimetry ◽  
Aromatic Diamines ◽  
Good Thermal Stability ◽  
High Performance Polymers ◽  
Amination Reaction ◽  
Aryl Amination ◽  
Palladium Catalyzed ◽  
Ft Ir

Poly(aryl imino sulphone)s (PAIS) as novel high-performance polymers have been obtained by the condensation polymerization of 4,4'-dibromodiphenyl solfone with different primary aromatic diamines via Palladium-catalyzed aryl amination reaction. The structure of polymers synthesized was characterized by means of FT-IR, NMR spectroscopy and elemental analysis, the results showed an agreement with the proposed structure. Differential scanning calorimetry (DSC) and thermal analysis (TG) measurements showed that polymers possessed high glass transition temperature (Tg>145°C) and good thermal stability with high decomposition temperatures (TD>450°C). These novel polymers also exhibited good mechanical behaviors and good solubility.

Thermal, morphological and mechanical properties of composites based on polyamide 6 with cellulose, silica and their hybrids from rice husk

2020 ◽  
pp. 002199832097829
Author(s):  
Renato P Melo ◽  
Marcelo P da Rosa ◽  
Paulo H Beck ◽  
Lucas GP Tienne ◽  
Maria de Fátima V Marques
Keyword(s):  
Mechanical Properties ◽  
Rice Husk ◽  
Natural Fibers ◽  
Polyamide 6 ◽  
Mechanical Analysis ◽  
Degree Of Crystallinity ◽  
Scanning Calorimetry ◽  
Cellulosic Fibers ◽  
The One ◽  
Properties Of Composites

The use of cellulosic fibers from different natural sources as fillers in polymer matrices to improve their properties has been extensively studied in the last years. It is mainly due to the vast availability of natural fibers as well as their biodegradability. The purpose of this present work was to extract cellulose, silica, and cellulose-silica fillers – these last called “hybrids” – from rice husk through delignification and subsequent oxidation and, then, prepare composites with polyamide 6 and improve mainly its thermal-mechanical properties. The content of 10 wt.% of fillers was inserted in PA 6 matrix. Infrared spectroscopy pointed the main characteristic peaks of cellulose and silica of hybrids, as thermogravimetric analysis showed high thermal stability of fillers, allowing their incorporation in PA-6 matrix by extrusion method. Thermo dynamic-mechanical analysis showed, in a general overview, a significant improvement of mechanical properties of composites, as elastic modulus, compared with neat polyamide-6, mainly the one with 2.5 wt% of silica and 7.5% of cellulose. This last also showed increasing of degree of crystallinity, measured by differential scanning calorimetry, showing the extraction efficiency of fillers from rice husk as well as the potential application of composites as structural components in automotive parts.

Mechanical and Thermomechanical Properties of Nylon6T/66/PPS Blends

2015 ◽  
Vol 815 ◽  
pp. 503-508
Author(s):  
Qi Zhang ◽  
Xiao Lin Luo ◽  
Mei Lin Zhang ◽  
Xiao Jun Wang ◽  
Gang Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Flexural Modulus ◽  
Thermomechanical Properties ◽  
Polymer Materials ◽  
Scanning Calorimetry ◽  
Polymer Blending ◽  
Good Thermal Stability ◽  
Aromatic Polyamides ◽  
Scanning Electron ◽  
Better Than

Polymer blending is a very important and widely used method for the modification of polymer materials. However, little attention has been paid to the Semi-aromatic Polyamides with PPS blends. In this article, we investigate the properties of Poly (phenylene sulfide) (PPS) blends with Poly (hexamethylene terephthalamide/hexamethylene hexanediamide) (nylon 6T/66). The structure, mechanical properties of nylon 6T/66 and (PPS) blends were studied by scanning electron microscopy (SEM), Differential scanning calorimetry (DSC) and Thermogravimetric analysis (TG). The results indicate that the blends have good thermal stability and the tensile strength, flexural strength and flexural modulus of the blends are better than the PA6T/66 but worse than that of the PPS.

Sign in / Sign up

Export Citation Format

Share Document