scholarly journals Optimization of the Production Process and Product Quality of Titanate Nanotube–Drug Composites

Nanomaterials ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1406 ◽  
Author(s):  
Yasmin Ranjous ◽  
Géza Regdon ◽  
Klára Pintye-Hódi ◽  
Tamás Varga ◽  
Imre Szenti ◽  
...  
Keyword(s):  
Scanning Calorimetry ◽  
Good Solubility ◽  
Composite Formation ◽  
Alternative Materials ◽  
High Volatility ◽  
Ft Ir ◽  
Fast Disintegrating Tablets ◽  
As Solubility ◽  
Properties Of Composites

Recently, there has been an increasing interest in the application of nanotubular structures for drug delivery. There are several promising results with carbon nanotubes; however, in light of some toxicity issues, the search for alternative materials has come into focus. The objective of the present study was to investigate the influence of the applied solvent on the composite formation of titanate nanotubes (TNTs) with various drugs in order to improve their pharmacokinetics, such as solubility, stability, and bioavailability. Composites were formed by the dissolution of atenolol (ATN) and hydrochlorothiazide (HCT) in ethanol, methanol, 0.01 M hydrochloric acid or in ethanol, 1M sodium hydroxide, dimethylformamide (DMF), dimethyl sulfoxide (DMSO), respectively, and then they were mixed with a suspension of TNTs under sonication for 30 min and vacuum-dried for 24 h. The structural properties of composites were characterized by SEM, TEM, FT-IR, differential scanning calorimetry (DSC), thermogravimetric (TG) analysis, and optical contact angle (OCA) measurements. Drug release was determined from the fast disintegrating tablets using a dissolution tester coupled with a UV–Vis spectrometer. The results revealed that not only the good solubility of the drug in the applied solvent, but also the high volatility of the solvent, is necessary for an optimal composite-formation process.

The Synthesis and Crystallization of Poly(vinylidene fluoride) in Supercritical CO2

e-Polymers ◽  
2006 ◽  
Vol 6 (1) ◽  
Author(s):  
Zhendong Shi ◽  
Zhen Zheng ◽  
Xiaoli Su ◽  
Xinling Wang
Keyword(s):  
Vinylidene Fluoride ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Molecular Weights ◽  
Good Solubility ◽  
Poly Vinylidene Fluoride ◽  
Ft Ir ◽  
Application Fields ◽  
Crystallization Mode

AbstractA series of poly(vinylidene fluoride)s (PVDFs) is synthesized in supercritical carbon dioxide (sc-CO2). The influences of polymerization pressure, molecular weight distribution and H-H defect concentration on the crystallization of PVDF have been studied in combination with differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXRD) and Fourier transform infrared spectroscopy (FT-IR) measurements. The result shows that the morphology, molecular weights, polydispersity and head-to-head (H-H) defect concentrations of the PVDFs are affected by the reaction pressure and good solubility generated from sc-CO2. Especially, the sc-CO2 polymerization has greatly improved the crystallization mode of the obtained PVDFs such as the complete degree of crystallinity, crystallinity and the crystal phase. This will create more comprehensive application fields for PVDF.

scholarly journals Nonwoven Bio-Based Membranes for Removal of Micropollutants from Aqueous Water

2021 ◽  
Vol 57 (4) ◽  
pp. 34-44
Author(s):  
Ecaterina Matei ◽  
Cristina Ileana Covaliu ◽  
George Coman ◽  
Mihai Negroiu ◽  
Maria Rapa ◽  
...  
Keyword(s):  
Electrospinning Process ◽  
Attenuated Total Reflectance ◽  
Scanning Calorimetry ◽  
Chemical Methods ◽  
Physical Chemical ◽  
Activated Coal ◽  
Solid Suspension ◽  
Electrospun Membranes ◽  
Ft Ir

The aim of this paper is to obtain two types of bio-based membranes by electrospinning process: one based on polylactic acid (PLA), and PLA/polyhydroxybutyrate (PHB), and the second by coating the PLA/PHB membrane with chitosan (CS) and CS/activated coal (AC), respectively for removal of micropollutants from aqueous water. The designed bio-based electrospun membranes were analyzed through scanning electron microscopy (SEM), attenuated total reflectance (ATR) - Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), the removal of solid suspension and Pb (II) from aqueous water. The quality of filtrates was evaluated by physical-chemical methods, while the retaining of Pb (II) from wastewaters was reported.

scholarly journals Effect of Polythiophene Content on Thermomechanical Properties of Electroconductive Composites

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2476
Author(s):  
Katarzyna Bednarczyk ◽  
Tomasz Kukulski ◽  
Ryszard Fryczkowski ◽  
Ewa Schab-Balcerzak ◽  
Marcin Libera
Keyword(s):  
Organic Solar Cells ◽  
Polyamide 6 ◽  
Thermomechanical Properties ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Mechanical And Electrical Properties ◽  
Ft Ir ◽  
Conductive Properties ◽  
The Impact ◽  
Properties Of Composites

The thermal, mechanical and electrical properties of polymeric composites combined using polythiophene (PT) dopped by FeCl3 and polyamide 6 (PA), in the aspect of conductive constructive elements for organic solar cells, depend on the molecular structure and morphology of materials as well as the method of preparing the species. This study was focused on disclosing the impact of the polythiophene content on properties of electrospun fibers. The elements for investigation were prepared using electrospinning applying two substrates. The study revealed the impact of the substrate on the conductive properties of composites. In this study composites exhibited good thermal stability, with T5 values in the range of 230–268 °C that increased with increasing PT content. The prepared composites exhibited comparable PA Tg values, which indicates their suitability for processing. Instrumental analysis of polymers and composites was carried out using Fourier Transform Infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM).

scholarly journals The combined use of GC, PDSC and FT-IR techniques to characterize fat extracted from commercial complete dry pet food for adult cats

2020 ◽  
Vol 18 (1) ◽  
pp. 1136-1147
Author(s):  
Klara Zglińska ◽  
Tomasz Niemiec ◽  
Joanna Bryś ◽  
Andrzej Bryś ◽  
Andrzej Łozicki ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Reference Model ◽  
Fatty Acid Content ◽  
Analytical Techniques ◽  
Food Samples ◽  
Pet Food ◽  
Scanning Calorimetry ◽  
Ft Ir ◽  
Adult Cats

AbstractThis study aims to compare the quality of fat extracted from different priced dry pet food for adult cats through classical and instrumental methods: pressure differential scanning calorimetry (PDSC), Fourier transform infrared spectroscopy (FT-IR) or gas chromatography (GC). Fat extracted from pet food was examined for induction time (IT), fatty acid composition, free fatty acid (FFA) content and peroxide value with the use of PDSC, GC, acid–base and iodometric titration, respectively. FT-IR data from the selected spectral regions correlate with the value of oxidation IT or the content of FFA. This resulted in construction of a reference model for IT with the following statistical features: Rcalibration = 0.917 (RMSEC = 28.0) and Rvalidation = 0.841 (RMSEP = 34.6). For fatty acid content, model statistics were as follows: Rcalibration = 0.912 (RMSEC = 0.61) and Rvalidation = 0.856 (RMSEP = 0.75). Discriminant model that uses spectral data alone, calculated with performance index 83.7 allowed distinguishing the studied pet food samples due to the price. Studies conducted proved PDSC and IR as reliable analytical techniques to control and monitor the quality of dry pet food for cats. Considering quality of the studied samples, it was proved that low-priced pet foods can be stored longer than premium-priced ones, while former is nutritionally more beneficial for adult cats.

Thermal Behaviour of Candesartan Active substance and in pharmaceutical compounds

2017 ◽  
Vol 68 (8) ◽  
pp. 1895-1902
Author(s):  
Ioana Cristina Tita ◽  
Eleonora Marian ◽  
Bogdan Tita ◽  
Claudia Crina Toma ◽  
Laura Vicas
Keyword(s):  
Thermal Behaviour ◽  
Active Substance ◽  
Pharmaceutical Research ◽  
Pharmaceutical Product ◽  
Nitrogen Atmosphere ◽  
Pure Substance ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir

Thermal analysis is one of the most frequently used instrumental techniques in the pharmaceutical research, for the thermal characterization of different materials from solids to semi-solids, which are of pharmaceutical relevance. In this paper, simultaneous thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC) were used for characterization of the thermal behaviour of candesartan cilexetil � active substance (C-AS) under dynamic nitrogen atmosphere and nonisothermal conditions, in comparison with pharmaceutical product containing the corresponding active substance. It was observed that the commercial samples showed a different thermal profile than the standard sample, caused by the presence of excipients in the pharmaceutical product and to possible interaction of these with the active substance. The Fourier transformed infrared spectroscopy (FT-IR) and X-ray powder diffraction (XRPD) were used as complementary techniques adequately implement and assist in interpretation of the thermal results. The main conclusion of this comparative study was that the TG/DTG and DSC curves, together with the FT-IR spectra, respectively X-ray difractograms constitute believe data for the discrimination between the pure substance and pharmaceutical forms.

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

scholarly journals Structural, thermal and electrical properties of composites electrolytes (1−x) CsH2PO4/x ZrO2 (0 ≤ x ≤ 0.4) for fuel cell with advanced electrode

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Deshraj Singh ◽  
Pawan Kumar ◽  
Jitendra Singh ◽  
Dharm Veer ◽  
Aravind Kumar ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Solid Acid ◽  
Thermal Characterization ◽  
Dihydrogen Phosphate ◽  
Conducting Material ◽  
Scanning Calorimetry ◽  
Milling Method ◽  
Thermal And Electrical Properties ◽  
Properties Of Composites

AbstractComposites proton conducting material based on cesium dihydrogen phosphate (CDP) doped with zirconium oxide (1−x) CsH2PO4/x ZrO2 were synthesized with different concentration having in the range such as x = 0.1, 0.2, 0.3 and 0.4 by ball milling method. The prepared solid acid composites were dried at 150 °C for 6 h. Structural and thermal characterization of solid acid composite proton electrolytes were carried out by X-ray diffractometer, Fourier transform infrared spectroscopy, and Raman spectroscopy respectively. Phase transition of the prepared materials was carried out by using differential scanning calorimetry and conductivity was measured by LC Impedance meter in the range 1 Hz to 400 kHz. The ionic conductivity of ZrO2 doped CsH2PO4 (CDP) was increased up to 1.3 × 10–2 S cm−1 at the 280 °C under environment atmospheric humidification which showed high stability as compared to pure CsH2PO4 (CDP). This obtaining result would be useful for establishing and design the next generation fuel cell.

scholarly journals Preparation, Thermal, and Thermo-Mechanical Characterization of Polymeric Blends Based on Di(meth)acrylate Monomers

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 878
Author(s):  
Krystyna Wnuczek ◽  
Andrzej Puszka ◽  
Łukasz Klapiszewski ◽  
Beata Podkościelna
Keyword(s):  
Mechanical Analysis ◽  
Attenuated Total Reflection ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Chemical Structures ◽  
Atomic Force ◽  
Polymeric Blends ◽  
Ft Ir ◽  
Acrylate Monomers ◽  
Synthesized Materials

This study presents the preparation and the thermo-mechanical characteristics of polymeric blends based on di(meth)acrylates monomers. Bisphenol A glycerolate diacrylate (BPA.GDA) or ethylene glycol dimethacrylate (EGDMA) were used as crosslinking monomers. Methyl methacrylate (MMA) was used as an active solvent in both copolymerization approaches. Commercial polycarbonate (PC) was used as a modifying soluble additive. The preparation of blends and method of polymerization by using UV initiator (Irqacure® 651) was proposed. Two parallel sets of MMA-based materials were obtained. The first included more harmless linear hydrocarbons (EGDMA + MMA), whereas the second included the usually used aromatic copolymers (BPA.GDA + MMA). The influence of different amounts of PC on the physicochemical properties was discussed in detail. Chemical structures of the copolymers were confirmed by attenuated total reflection–Fourier transform infrared (ATR/FT-IR) spectroscopy. Thermo-mechanical properties of the synthesized materials were investigated by means of differential scanning calorimetry (DSC), thermogravimetric (TG/DTG) analyses, and dynamic mechanical analysis (DMA). The hardness of the obtained materials was also tested. In order to evaluate the surface of the materials, their images were obtained with the use of atomic force microscopy (AFM).

scholarly journals Mechanical, Thermal and Rheological Properties of Polyethylene-Based Composites Filled with Micrometric Aluminum Powder

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1242
Author(s):  
Olga Mysiukiewicz ◽  
Paulina Kosmela ◽  
Mateusz Barczewski ◽  
Aleksander Hejna
Keyword(s):  
Mechanical Properties ◽  
Melt Flow Index ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Flow Index ◽  
Scanning Calorimetry ◽  
Metal Composites ◽  
Pre Treatment ◽  
The Impact ◽  
Properties Of Composites

Investigations related to polymer/metal composites are often limited to the analysis of the electrical and thermal conductivity of the materials. The presented study aims to analyze the impact of aluminum (Al) filler content (from 1 to 20 wt%) on the rarely investigated properties of composites based on the high-density polyethylene (HDPE) matrix. The crystalline structure, rheological (melt flow index and oscillatory rheometry), thermal (differential scanning calorimetry), as well as static (tensile tests, hardness, rebound resilience) and dynamic (dynamical mechanical analysis) mechanical properties of composites were investigated. The incorporation of 1 and 2 wt% of aluminum filler resulted in small enhancements of mechanical properties, while loadings of 5 and 10 wt% provided materials with a similar performance to neat HDPE. Such results were supported by the lack of disturbances in the rheological behavior of composites. The presented results indicate that a significant content of aluminum filler may be introduced into the HDPE matrix without additional pre-treatment and does not cause the deterioration of composites’ performance, which should be considered beneficial when engineering PE/metal composites.

Sign in / Sign up

Export Citation Format

Share Document