scholarly journals Exploring the Effect of Ammonium Iodide Salts Employed in Multication Perovskite Solar Cells with a Carbon Electrode

Molecules ◽  
2021 ◽  
Vol 26 (19) ◽  
pp. 5737
Author(s):  
Maria Bidikoudi ◽  
Carmen Simal ◽  
Vasillios Dracopoulos ◽  
Elias Stathatos

Perovskite solar cells that use carbon (C) as a replacement of the typical metal electrodes, which are most commonly employed, have received growing interest over the past years, owing to their low cost, ease of fabrication and high stability under ambient conditions. Even though Power Conversion Efficiencies (PCEs) have increased over the years, there is still room for improvement, in order to compete with metal-based devices, which exceed 25% efficiency. With the scope of increasing the PCE of Carbon based Perovskite Solar Cells (C-PSCs), in this work we have employed a series of ammonium iodides (ammonium iodide, ethylammonium iodide, tetrabutyl ammonium iodide, phenethylammonium iodide and 5-ammonium valeric acid iodide) as additives in the multiple cation-mixed halide perovskite precursor solution. This has led to a significant increase in the PCE of the corresponding devices, by having a positive impact on the photocurrent values obtained, which exhibited an increase exceeding 20%, from 19.8 mA/cm2, for the reference perovskite, to 24 mA/cm2, for the additive-based perovskite. At the same time, the ammonium iodide salts were used in a post-treatment method. By passivating the defects, which provide charge recombination centers, an improved performance of the C-PSCs has been achieved, with enhanced FF values reaching 59%, which is a promising result for C-PSCs, and Voc values up to 850 mV. By combining the results of these parallel investigations, C-PSCs of the triple mesoscopic structure with a PCE exceeding 10% have been achieved, while the in-depth investigation of the effects of ammonium iodides in this PSC structure provide a fruitful insight towards the optimum exploitation of interface and bulk engineering, for high efficiency and stable C-PSCs, with a structure that is favorable for large area applications.

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Alexander D. Taylor ◽  
Qing Sun ◽  
Katelyn P. Goetz ◽  
Qingzhi An ◽  
Tim Schramm ◽  
...  

AbstractDeposition of perovskite films by antisolvent engineering is a highly common method employed in perovskite photovoltaics research. Herein, we report on a general method that allows for the fabrication of highly efficient perovskite solar cells by any antisolvent via manipulation of the antisolvent application rate. Through detailed structural, compositional, and microstructural characterization of perovskite layers fabricated by 14 different antisolvents, we identify two key factors that influence the quality of the perovskite layer: the solubility of the organic precursors in the antisolvent and its miscibility with the host solvent(s) of the perovskite precursor solution, which combine to produce rate-dependent behavior during the antisolvent application step. Leveraging this, we produce devices with power conversion efficiencies (PCEs) that exceed 21% using a wide range of antisolvents. Moreover, we demonstrate that employing the optimal antisolvent application procedure allows for highly efficient solar cells to be fabricated from a broad range of precursor stoichiometries.


2021 ◽  
Vol 33 (14) ◽  
pp. 2005410
Author(s):  
Lingfeng Chao ◽  
Tingting Niu ◽  
Weiyin Gao ◽  
Chenxin Ran ◽  
Lin Song ◽  
...  

2021 ◽  
pp. 2109968
Author(s):  
Xiaojia Xu ◽  
Xiaoyu Ji ◽  
Rui Chen ◽  
Fangyuan Ye ◽  
Shuaijun Liu ◽  
...  

Author(s):  
Li Zhang ◽  
Hui Li ◽  
Jing Zhuang ◽  
Yigang Luan ◽  
Sixuan Wu ◽  
...  

The low-cost material antimony trifluoride (SbF3) was doped into the commonly used tin dioxide (SnO2) for the first time, and the SbF3-doped SnO2 as an electron transport layer (ETL) was...


2019 ◽  
Vol 191 ◽  
pp. 389-398 ◽  
Author(s):  
Shaoyang Ma ◽  
Tao Ye ◽  
Tingting Wu ◽  
Zhe Wang ◽  
Zhixun Wang ◽  
...  

Metals ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 964 ◽  
Author(s):  
Yue Zhang ◽  
Haiming Zhang ◽  
Xiaohui Zhang ◽  
Lijuan Wei ◽  
Biao Zhang ◽  
...  

Organic–inorganic hybrid perovskite solar cells (PSCs) have made immense progress in recent years, owing to outstanding optoelectronic properties of perovskite materials, such as high extinction coefficient, carrier mobility, and low exciton binding energy. Since the first appearance in 2009, the efficiency of PSCs has reached 23.3%. This has made them the most promising rival to silicon-based solar cells. However, there are still several issues to resolve to promote PSCs’ outdoor applications. In this review, three crucial aspects of PSCs, including high efficiency, environmental stability, and low-cost of PSCs, are described in detail. Recent in-depth studies on different aspects are also discussed for better understanding of these issues and possible solutions.


Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5843
Author(s):  
Rosaria Verduci ◽  
Antonio Agresti ◽  
Valentino Romano ◽  
Giovanna D’Angelo

The last decade has witnessed the advance of metal halide perovskites as a promising low-cost and efficient class of light harvesters used in solar cells (SCs). Remarkably, the efficiency of lab-scale perovskite solar cells (PSCs) reached a power conversion efficiency of 25.5% in just ~10 years of research, rivalling the current record of 26.1% for Si-based PVs. To further boost the performances of PSCs, the use of 2D materials (such as graphene, transition metal dichalcogenides and transition metal carbides, nitrides and carbonitrides) has been proposed, thanks to their remarkable optoelectronic properties (that can be tuned with proper chemical composition engineering) and chemical stability. In particular, 2D materials have been demonstrated as promising candidates for (i) accelerating hot carrier transfer across the interfaces between the perovskite and the charge extraction layers; (ii) improving the crystallization of the perovskite layers (when used as additives in the precursor solution); (iii) favoring electronic bands alignment through tuning of the work function. In this mini-review, we discuss the physical mechanisms underlying the increased efficiency of 2D material-based PSCs, focusing on the three aforementioned effects.


2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Guiming Peng ◽  
Xueqing Xu ◽  
Gang Xu

The ramping solar energy to electricity conversion efficiencies of hybrid organic-inorganic perovskite solar cells during the last five years have opened new doors to low-cost solar energy. The record power conversion efficiency has climbed to 19.3% in August 2014 and then jumped to 20.1% in November. In this review, the main achievements for perovskite solar cells categorized from a viewpoint of device structure are overviewed. The challenges and prospects for future development of this field are also briefly presented.


Author(s):  
Duc

Perovskites are increasingly proved to be a promising candidate for making absorber materials for high-efficiency and low-cost next-generation solar cells. There are several models proposed for perovskite solar cells similar to the conventional solar cells; their operation also has specific characteristics and requires the development of a more general physical model to study, thus optimizing the cells and improving the performance of the panels. This paper develops such a physics-based intuitive model to consider the performance of two high-efficiency types of perovskite solar cells, taking into account heterogeneous properties, with filtered transport layers, recombination, charge selection, and voltage-dependent collector. This model would allow experimentally to estimate critical parameters of perovskite solar cells, understand the performance bottleneck, and predict the performance of perovskite solar cells and suggest further study for perovskite solar cell technology development.   


Sign in / Sign up

Export Citation Format

Share Document