scholarly journals Multimode Robust Lasing in a Dye-Doped Polymer Layer Embedded in a Wedge-Shaped Cholesteric

Molecules ◽  
2021 ◽  
Vol 26 (19) ◽  
pp. 6089
Author(s):  
Tatevik M. Sarukhanyan ◽  
Hermine Gharagulyan ◽  
Mushegh S. Rafayelyan ◽  
Sergey S. Golik ◽  
Ashot H. Gevorgyan ◽  
...  
Keyword(s):  
Optical Properties ◽  
Spectral Lines ◽  
Polymer Layer ◽  
Laser Generation ◽  
Light Sources ◽  
Defect Modes ◽  
Multimode Laser ◽  
Application Range ◽  
Wide Range ◽  
Doped Polymer

Cholesteric liquid crystals (CLCs) with induced defects are one of the most prominent materials to realize compact, low-threshold and tunable coherent light sources. In this context, the investigation of optical properties of induced defect modes in such CLCs is of great interest. In particular, many studies have been devoted to the spectral control of the defect modes depending on their thickness, optical properties, distribution along the CLC, etc. In this paper, we investigate the lasing possibilities of a dye-doped polymer layer embedded in a wedge-shaped CLC. We show that multimode laser generation is possible due to the observed multiple defect modes in the PBG that enlarges the application range of the system. Furthermore, our simulations based on a Berreman 4 × 4 matrix approach for a wide range of CLC thickness show both periodic and continuous generation of defect modes along particular spectral lines inside the PBG. Such a robust spectral behaviour of induced defect modes is unique, and, to our knowledge, is not observed in similar CLC-based structures.

scholarly journals Spectral Peculiarities of Multilayer Cholesteric Wedge-Cell System with Dye-Doped Polymer Layer-=SUP=-*-=/SUP=-

2020 ◽  
Vol 128 (10) ◽  
pp. 1533
Author(s):  
H. Gharagulyan ◽  
T.M. Sarukhanyan ◽  
A.V. Ninoyan ◽  
A.H. Gevorgyan ◽  
R.B. Alaverdyan
Keyword(s):  
Photonic Bandgap ◽  
Theoretical Calculations ◽  
Cell System ◽  
Polymer Layer ◽  
Defect Modes ◽  
Application Range ◽  
Modified Method ◽  
Multiple Defect ◽  
Low Threshold ◽  
Doped Polymer

Spectral properties of the three-layered wedge-cell system of two identical cholesteric layers with an isotropic defect (dye-doped polymer layer) between them were investigated experimentally and theoretically. It was shown that multiple defect modes can be observed in this kind of system.s photonic bandgap which widen the application range of mentioned above system such as low threshold lasing, multi-position trigger, multiwavelength filters, light shutters, etc. Supporting simulation was also provided showing an agreement between experimental results and theoretical calculations. The problem was solved by Ambartsumian.s layer addition modified method. Keywords: cholesteric liquid crystals, chirality, photonic bandgap, defect modes, tuning, laser dye, polymer layer.

Optical Properties of HVEM Accelerators

1975 ◽  
Vol 33 ◽  
pp. 180-181
Author(s):  
A. Strojnik ◽  
J.W. Scholl ◽  
V. Bevc
Keyword(s):  
Optical Properties ◽  
Electron Accelerator ◽  
Systematic Investigation ◽  
Electron Source ◽  
High Brightness ◽  
The Past ◽  
Wide Range ◽  
Optical Behavior

The electron accelerator, as inserted between the electron source (injector) and the imaging column of the HVEM, is usually a strong lens and should be optimized in order to ensure high brightness over a wide range of accelerating voltages and illuminating conditions. This is especially true in the case of the STEM where the brightness directly determines the highest resolution attainable. In the past, the optical behavior of accelerators was usually determined for a particular configuration. During the development of the accelerator for the Arizona 1 MEV STEM, systematic investigation was made of the major optical properties for a variety of electrode configurations, number of stages N, accelerating voltages, 1 and 10 MEV, and a range of injection voltages ϕ0 = 1, 3, 10, 30, 100, 300 kV).

Ab initio calculation on the Optical Properties of AA- Stacked two dimensional Graphene, Silicene, Germanene, and Stanene

2018 ◽  
Vol 1 (1) ◽  
pp. 46-50
Author(s):  
Rita John ◽  
Benita Merlin
Keyword(s):  
Optical Properties ◽  
Band Structure ◽  
Density Functional ◽  
Electronic Band Structure ◽  
Complex Refractive Index ◽  
Single Layer ◽  
Generalized Gradient ◽  
Electronic Band ◽  
Wide Range ◽  
Optical Region

In this study, we have analyzed the electronic band structure and optical properties of AA-stacked bilayer graphene and its 2D analogues and compared the results with single layers. The calculations have been done using Density Functional Theory with Generalized Gradient Approximation as exchange correlation potential as in CASTEP. The study on electronic band structure shows the splitting of valence and conduction bands. A band gap of 0.342eV in graphene and an infinitesimally small gap in other 2D materials are generated. Similar to a single layer, AA-stacked bilayer materials also exhibit excellent optical properties throughout the optical region from infrared to ultraviolet. Optical properties are studied along both parallel (||) and perpendicular ( ) polarization directions. The complex dielectric function (ε) and the complex refractive index (N) are calculated. The calculated values of ε and N enable us to analyze optical absorption, reflectivity, conductivity, and the electron loss function. Inferences from the study of optical properties are presented. In general the optical properties are found to be enhanced compared to its corresponding single layer. The further study brings out greater inferences towards their direct application in the optical industry through a wide range of the optical spectrum.

Carbon Dots for Bacterial Detection and Antibacterial Applications-A Minireview

2020 ◽  
Vol 25 (46) ◽  
pp. 4848-4860 ◽  
Author(s):  
Anisha Anand ◽  
Gopinathan Manavalan ◽  
Ranju Prasad Mandal ◽  
Huan-Tsung Chang ◽  
Yi-Ru Chiou ◽  
...  
Keyword(s):  
Optical Properties ◽  
Carbon Dots ◽  
Antibacterial Effect ◽  
Bacterial Detection ◽  
High Brightness ◽  
Photo Catalysis ◽  
Wide Range ◽  
Prevention And Treatment ◽  
Low Toxicity ◽  
Conventional Antibiotics

: The prevention and treatment of various infections caused by microbes through antibiotics are becoming less effective due to antimicrobial resistance. Researches are focused on antimicrobial nanomaterials to inhibit bacterial growth and destroy the cells, to replace conventional antibiotics. Recently, carbon dots (C-Dots) become attractive candidates for a wide range of applications, including the detection and treatment of pathogens. In addition to low toxicity, ease of synthesis and functionalization, and high biocompatibility, C-Dots show excellent optical properties such as multi-emission, high brightness, and photostability. C-Dots have shown great potential in various fields, such as biosensing, nanomedicine, photo-catalysis, and bioimaging. This review focuses on the origin and synthesis of various C-Dots with special emphasis on bacterial detection, the antibacterial effect of CDots, and their mechanism.

scholarly journals Development of a Long Period Fiber Grating Interrogation System Using a Multimode Laser Diode

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 749
Author(s):  
Luís Henrique Silva ◽  
Paulo Santos ◽  
Luís C. C. Coelho ◽  
Pedro Jorge ◽  
José Manuel Baptista
Keyword(s):  
Laser Diode ◽  
Measurement Errors ◽  
Laser Scanning ◽  
Fiber Grating ◽  
Light Sources ◽  
Fiber Gratings ◽  
Multimode Laser ◽  
Central Wavelength ◽  
Long Period ◽  
Multimode Laser Diode

Optical fiber gratings have long shown their sensing capabilities. One of the main challenges, however, is the interrogation method applied, since typical systems tend to use broadband light sources with optical spectrum analyzers, laser scanning units or CCD (Charged Coupled Device) spectrometers. The following paper presents the development of an interrogation system, which explores the temperature response of a multimode laser diode, in order to interrogate long period fiber gratings. By performing a spectral sweep along one of its rejection bands, a discrete attenuation spectrum is created. Through a curve fitting technique, the original spectrum is restored. The built unit, while presenting a substantially reduced cost compared with typical interrogation systems, is capable of interrogating along a 10 nm window with measurement errors reaching minimum values as low as 0.4 nm, regarding the grating central wavelength, and 0.4 dB for its attenuation. Given its low cost and reduced dimensions, the developed system shows potential for slow-changing field applications.

scholarly journals Formation of Carbon Quantum Dots via Hydrothermal Carbonization: Investigate the Effect of Precursors

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 986
Author(s):  
Md Rifat Hasan ◽  
Nepu Saha ◽  
Thomas Quaid ◽  
M. Toufiq Reza
Keyword(s):  
Quantum Dots ◽  
Optical Properties ◽  
Microcrystalline Cellulose ◽  
Uv Light ◽  
Synthesis Method ◽  
Hydrothermal Carbonization ◽  
Carbon Quantum Dots ◽  
Medical Diagnostics ◽  
Particle Size Range ◽  
Wide Range

Carbon quantum dots (CQDs) are nanomaterials with a particle size range of 2 to 10 nm. CQDs have a wide range of applications such as medical diagnostics, bio-imaging, biosensors, coatings, solar cells, and photocatalysis. Although the effect of various experimental parameters, such as the synthesis method, reaction time, etc., have been investigated, the effect of different feedstocks on CQDs has not been studied yet. In this study, CQDs were synthesized from hydroxymethylfurfural, furfural, and microcrystalline cellulose via hydrothermal carbonization at 220 °C for 30 min of residence time. The produced CQDs showed green luminescence behavior under the short-wavelength UV light. Furthermore, the optical properties of CQDs were investigated using ultraviolet-visible spectroscopy and emission spectrophotometer, while the morphology and chemical bonds of CQDs were investigated using transmission electron microscopy and Fourier-transform infrared spectroscopy, respectively. Results showed that all CQDs produced from various precursors have absorption and emission properties but these optical properties are highly dependent on the type of precursor. For instance, the mean particle sizes were 6.36 ± 0.54, 5.35 ± 0.56, and 3.94 ± 0.60 nm for the synthesized CQDs from microcrystalline cellulose, hydroxymethylfurfural, and furfural, respectively, which appeared to have similar trends in emission intensities. In addition, the synthesized CQDs experienced different functionality (e.g., C=O, O-H, C-O) resulting in different absorption behavior.

scholarly journals One year of Raman lidar observations of free-tropospheric aerosol layers over South Africa

2015 ◽  
Vol 15 (10) ◽  
pp. 5429-5442 ◽  
Author(s):  
E. Giannakaki ◽  
A. Pfüller ◽  
K. Korhonen ◽  
T. Mielonen ◽  
L. Laakso ◽  
...  
Keyword(s):  
South Africa ◽  
Optical Properties ◽  
Biomass Burning ◽  
Mean Value ◽  
Aerosol Layer ◽  
Raman Lidar ◽  
Tropospheric Aerosol ◽  
Wide Range ◽  
Significant Difference ◽  
532 Nm

Abstract. Raman lidar data obtained over a 1 year period has been analysed in relation to aerosol layers in the free troposphere over the Highveld in South Africa. In total, 375 layers were observed above the boundary layer during the period 30 January 2010 to 31 January 2011. The seasonal behaviour of aerosol layer geometrical characteristics, as well as intensive and extensive optical properties were studied. The highest centre heights of free-tropospheric layers were observed during the South African spring (2520 ± 970 m a.g.l., also elsewhere). The geometrical layer depth was found to be maximum during spring, while it did not show any significant difference for the rest of the seasons. The variability of the analysed intensive and extensive optical properties was high during all seasons. Layers were observed at a mean centre height of 2100 ± 1000 m with an average lidar ratio of 67 ± 25 sr (mean value with 1 standard deviation) at 355 nm and a mean extinction-related Ångström exponent of 1.9 ± 0.8 between 355 and 532 nm during the period under study. Except for the intensive biomass burning period from August to October, the lidar ratios and Ångström exponents are within the range of previous observations for urban/industrial aerosols. During Southern Hemispheric spring, the biomass burning activity is clearly reflected in the optical properties of the observed free-tropospheric layers. Specifically, lidar ratios at 355 nm were 89 ± 21, 57 ± 20, 59 ± 22 and 65 ± 23 sr during spring (September–November), summer (December–February), autumn (March–May) and winter (June–August), respectively. The extinction-related Ångström exponents between 355 and 532 nm measured during spring, summer, autumn and winter were 1.8 ± 0.6, 2.4 ± 0.9, 1.8 ± 0.9 and 1.8 ± 0.6, respectively. The mean columnar aerosol optical depth (AOD) obtained from lidar measurements was found to be 0.46 ± 0.35 at 355 nm and 0.25 ± 0.2 at 532 nm. The contribution of free-tropospheric aerosols on the AOD had a wide range of values with a mean contribution of 46%.

The Research and Application of Artificial Intelligence in the Field of Intelligent Robot

2014 ◽  
Vol 898 ◽  
pp. 763-766
Author(s):  
Zhi Hao Li
Keyword(s):  
Artificial Intelligence ◽  
Environmental Changes ◽  
Vision System ◽  
Mineral Exploration ◽  
Intelligent Robot ◽  
Application Range ◽  
Intelligent Robots ◽  
External Data ◽  
Wide Range ◽  
Artificial Intelligence Application

The research and application of artificial intelligence has a very wide range in intelligent robot field. Intelligent robot can not only make use of artificial intelligence gain access to external data, information, (such as stereo vision system, face recognition and tracking, etc.), and then deal with it so as to exactly describe external environment, and complete a task independently, owing the ability of learning knowledge, but also have self-many kinds of artificial intelligence like judgment and decision making, processing capacity and so on. It can make corresponding decision according to environmental changes. Its application range is expanding. In deep sea exploration, star exploration, mineral exploration, heavy pollution, domestic service, entertainment clubs, health care and so on, the figure of intelligent robots artificial intelligence application can all be seen.

scholarly journals An ab-initio study on structural, elastic, electronic, bonding, thermal, and optical properties of topological Weyl semimetal TaX (X = P, As)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
M. I. Naher ◽  
S. H. Naqib
Keyword(s):  
Optical Properties ◽  
Band Structure ◽  
Fermi Level ◽  
Density Of States ◽  
Electronic Band Structure ◽  
Optical Parameters ◽  
Electronic Density ◽  
Electronic Band ◽  
Wide Range ◽  
Weyl Semimetals

AbstractIn recent days, study of topological Weyl semimetals have become an active branch of physics and materials science because they led to realization of the Weyl fermions and exhibited protected Fermi arc surface states. Therefore, topological Weyl semimetals TaX (X = P, As) are important electronic systems to investigate both from the point of view of fundamental physics and potential applications. In this work, we have studied the structural, elastic, mechanical, electronic, bonding, acoustic, thermal and optical properties of TaX (X = P, As) in detail via first-principles method using the density functional theory. A comprehensive study of elastic constants and moduli shows that both TaP and TaAs possesses low to medium level of elastic anisotropy (depending on the measure), reasonably good machinability, mixed bonding characteristics with ionic and covalent contributions, brittle nature and relatively high Vickers hardness with a low Debye temperature and melting temperature. The minimum thermal conductivities and anisotropies of TaX (X = P, As) are calculated. Bond population analysis supports the bonding nature as predicted by the elastic parameters. The bulk electronic band structure calculations reveal clear semi-metallic features with quasi-linear energy dispersions in certain sections of the Brillouin zone near the Fermi level. A pseudogap in the electronic energy density of states at the Fermi level separating the bonding and the antibonding states indicates significant electronic stability of tetragonal TaX (X = P, As).The reflectivity spectra show almost non-selective behavior over a wide range of photon energy encompassing visible to mid-ultraviolet regions. High reflectivity over wide spectral range makes TaX suitable as reflecting coating. TaX (X = P, As) are very efficient absorber of ultraviolet radiation. Both the compounds are moderately optically anisotropic owing to the anisotropic nature of the electronic band structure. The refractive indices are very high in the infrared to visible range. All the energy dependent optical parameters show metallic features and are in complete accord with the underlying bulk electronic density of states calculations.

Sign in / Sign up

Export Citation Format

Share Document