scholarly journals Gradient Enhanced Strain Hardening and Tensile Deformability in a Gradient-Nanostructured Ni Alloy

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2437
Author(s):  
Xinlai An ◽  
Weikang Bao ◽  
Zuhe Zhang ◽  
Zhouwen Jiang ◽  
Shengyun Yuan ◽  
...  
Keyword(s):  
Strain Hardening ◽  
Mechanical Performance ◽  
Uniform Elongation ◽  
Nanostructured Material ◽  
Coarse Grained ◽  
Lower Strength ◽  
Spatial Gradients ◽  
Ni Alloy ◽  
Enhanced Strain ◽  
Nanostructured Layers

Gradient-nanostructured material is an emerging category of material with spatial gradients in microstructural features. The incompatibility between gradient nanostructures (GNS) in the surface layer and coarse-grained (CG) core and their roles in extra strengthening and strain hardening have been well elucidated. Nevertheless, whether similar mechanisms exist within the GNS is not clear yet. Here, interactions between nanostructured layers constituting the GNS in a Ni alloy processed by surface mechanical rolling treatment were investigated by performing unique microtension tests on the whole GNS and three subdivided nanostructured layers at specific depths, respectively. The isolated nanograined layer at the topmost surface shows the highest strength but a brittle nature. With increasing depths, isolated layers exhibit lower strength but enhanced tensile plasticity. The GNS sample’s behavior complied more with the soft isolated layer at the inner side of GNS. Furthermore, an extra strain hardening was found in the GNS sample, leading to a greater uniform elongation (>3%) as compared to all of three constituent nanostructured layers. This extra strain hardening could be ascribed to the effects of the strain gradients arising from the incompatibility associated with the depth-dependent mechanical performance of various nanostructured layers.

scholarly journals Superior Strength and Ductility of 304 Austenitic Stainless Steel with Gradient Dislocations

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2613
Author(s):  
Qingsong Pan ◽  
Song Guo ◽  
Fang Cui ◽  
Lijun Jing ◽  
Lei Lu
Keyword(s):  
Stainless Steel ◽  
Mechanical Performance ◽  
Uniform Elongation ◽  
Deformation Mechanisms ◽  
Coarse Grained ◽  
304 Stainless Steel ◽  
Deformation Twins ◽  
304 Austenitic Stainless Steel ◽  
Multiple Deformation ◽  
Strength And Ductility

Materials with designed gradient nanograins exhibit unprecedented mechanical properties, such as superior strength and ductility. In this study, a heterostructured 304 stainless steel with solely gradient dislocation structure (GDS) in micron-sized grains produced by cyclic-torsion processing was demonstrated to exhibit a substantially improved yield strength with slightly reduced uniform elongation, compared with its coarse grained counterparts. Microstructural observations reveal that multiple deformation mechanisms, associated with the formation of dense dislocation patterns, deformation twins and martensitic phase, are activated upon straining and contribute to the delocalized plastic deformation and the superior mechanical performance of the GDS 304 stainless steel.

scholarly journals Review of the relationship between aggregates geology and Los Angeles and micro-Deval tests

2021 ◽  
Vol 80 (3) ◽  
pp. 1963-1980
Author(s):  
Solomon Adomako ◽  
Christian John Engelsen ◽  
Rein Terje Thorstensen ◽  
Diego Maria Barbieri
Keyword(s):  
Los Angeles ◽  
Crystal Size ◽  
Grain Shape ◽  
Mechanical Performance ◽  
Pore Space ◽  
Construction Material ◽  
Engineering Properties ◽  
Coarse Grained ◽  
The Impact ◽  
The Relationship

AbstractRock aggregates constitute the enormous volume of inert construction material used around the globe. The petrologic description as igneous, sedimentary, and metamorphic types establishes the intrinsic formation pattern of the parent rock. The engineering properties of these rocks vary due to the differences in the transformation process (e.g. hydrothermal deposits) and weathering effect. The two most common mechanical tests used to investigate the performance of aggregates are the Los Angeles (LA) and micro-Deval (MD) tests. This study reviewed the geological parameters (including mineralogy, grain and crystal size, grain shape, and porosity) and the relationship to Los Angeles and micro-Deval tests. It was found that high content of primary minerals in rocks (e.g. quartz and feldspar) is a significant parameter for performance evaluation. Traces of secondary and accessory minerals also affect the performance of rocks, although in many cases it is based on the percentage. Furthermore, some studies showed that the effect of mineralogic composition on mechanical strength is not sufficient to draw final conclusions of mechanical performance; therefore, the impact of other textural characteristics should be considered. The disposition of grain size and crystal size (e.g. as result of lithification) showed that rocks composed of fine-grain textural composition of ≤ 1 mm enhanced fragmentation and wear resistance than medium and coarse grained (≥ 1 mm). The effect of grain shape was based on convex and concave shapes and flat and elongated apexes of tested samples. The equidimensional form descriptor of rocks somehow improved resistance to impact from LA than highly flat and elongated particles. Lastly, the distribution of pore space investigated by means of the saturation method mostly showed moderate (R = 0.50) to strong (R = 0.90) and positive correlations to LA and MD tests.

Grain Refinement and Deformation Behavior of Ultrafine Grained Pd and Pd-Ag Alloys Produced by HPT

2008 ◽  
Vol 584-586 ◽  
pp. 182-187
Author(s):  
Lilia Kurmanaeva ◽  
Yulia Ivanisenko ◽  
J. Markmann ◽  
Ruslan Valiev ◽  
Hans Jorg Fecht
Keyword(s):  
Mechanical Properties ◽  
Deformation Behavior ◽  
Materials Science ◽  
High Pressure Torsion ◽  
Uniform Elongation ◽  
Grain Structure ◽  
Coarse Grained ◽  
Ultrafine Grain ◽  
Ultrafine Grained ◽  
Ultrafine Grain Structure

Investigations of mechanical properties of nanocrystalline (nc) materials are still in interest of materials science, because they offer wide application as structural materials thanks to their outstanding mechanical properties. NC materials demonstrate superior hardness and strength as compared with their coarse grained counterparts, but very often they possess a limited ductility or show low uniform elongation due to poor strain hardening ability. Here, we present the results of investigation of the microstructure and mechanical properties of nc Pd and Pd-x%Ag (x=20, 60) alloys. The initially coarse grained Pd-x% Ag samples were processed by high pressure torsion, which resulted in formation of homogenous ultrafine grain structure. The increase of Ag contents led to the decrease of the resulted grain size and change in deformation behavior, because of decreasing of stacking fault energy (SFE). The samples with larger Ag contents demonstrated the higher values of hardness, yield stress and ultimate stress. Remarkably the uniform elongation had also increased with increase of strength.

On the mechanical performance of K- and Na-based strain-hardening geopolymer composites (SHGC) reinforced with PVA fibers

2020 ◽  
Vol 248 ◽  
pp. 118558 ◽  
Author(s):  
Ana Carolina Constâncio Trindade ◽  
Iurie Curosu ◽  
Marco Liebscher ◽  
Viktor Mechtcherine ◽  
Flávio de Andrade Silva
Keyword(s):  
Strain Hardening ◽  
Mechanical Performance ◽  
Geopolymer Composites

scholarly journals Enhanced Foamability with Shrinking Microfibers in Linear Polymer

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 211 ◽  
Author(s):  
Eric Kim ◽  
Heon Park ◽  
Carlos Lopez-Barron ◽  
Patrick Lee
Keyword(s):  
Strain Hardening ◽  
Polymer Processing ◽  
Expansion Ratio ◽  
Low Frequencies ◽  
Extensional Rheometry ◽  
Enhanced Strain ◽  
Linear Viscoelastic ◽  
Cost Efficient ◽  
Strain Hardening Behavior

Strain hardening has important roles in understanding material structures and polymer processing methods, such as foaming, film forming, and fiber extruding. A common method to improve strain hardening behavior is to chemically branch polymer structures, which is costly, thus preventing users from controlling the degree of behavior. A smart microfiber blending technology, however, would allow cost-efficient tuning of the degree of strain hardening. In this study, we investigated the effects of compounding polymers with microfibers for both shear and extensional rheological behaviors and characteristics and thus for the final foam morphologies formed by batch physical foaming with carbon dioxide. Extensional rheometry showed that compounding of in situ shrinking microfibers significantly enhanced strain hardening compared to compounding of nonshrinking microfibers. Shear rheometry with linear viscoelastic data showed a greater increase in both the loss and storage modulus in composites with shrinking microfibers than in those with nonshrinking microfibers at low frequencies. The batch physical foaming results demonstrated a greater increase in the cell population density and expansion ratio with in situ shrinking microfibers than with nonshrinking microfibers. The enhancement due to the shrinkage of compounded microfibers decreasing with temperature implies that the strain hardening can be tailored by changing processing conditions.

scholarly journals Tensile properties of a novel fibre reinforced geopolymer composite with enhanced strain hardening characteristics

2017 ◽  
Vol 168 ◽  
pp. 402-427 ◽  
Author(s):  
Mohammed Haloob Al-Majidi ◽  
Andreas Lampropoulos ◽  
Andrew B. Cundy
Keyword(s):  
Strain Hardening ◽  
Tensile Properties ◽  
Enhanced Strain

Influence of Grain Size on Mechanical Properties in a Fe-9Ni-12Mn-2.5Si-1.0C TWIP Steel

2011 ◽  
Vol 197-198 ◽  
pp. 655-661
Author(s):  
Ze Bin Yang ◽  
Ding Yi Zhu ◽  
Wei Fa Yi ◽  
Shu Mei Lin ◽  
Cheng Mei Du
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Tensile Strength ◽  
Strain Hardening ◽  
Twip Steel ◽  
Optical Microscope ◽  
Coarse Grained ◽  
Microstructure Observation ◽  
Transmission Electron ◽  
Average Grain Size

We investigate the influence of grain size on mechanical properties in a Fe-9Ni-12Mn-2.5Si-1.0C TWIP steel by unidirectional tensile. Meanwhile the microstructures of the TWIP steel were observed and analyzed by optical microscope (OM) and transmission electron microscope (TEM). The experimental results show that the TWIP steel’s yield strength and tensile strength decrease with the increasing of grain size, whereas the plasticity increases with it. When the average grain size reaches to 27μm, the tensile strength is 1080MPa, the elongation percentage is 77%, and the strength-plasticity product achieves the 83160MPa•%. Steel’s strain hardening rate can be changed from three-stage to four-stage with the increasing of grain sizes, the areas of strain hardening by twin deformation mechanism are expanded. Through the microstructure observation we found that, coarse-grained TWIP steel conducts to twinning formation, the high density twins can increase the alloy’s ductility by splitting the grain.

Sign in / Sign up

Export Citation Format

Share Document