scholarly journals Preparation of CuCrO2 Hollow Nanotubes from an Electrospun Al2O3 Template

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1252 ◽  
Author(s):  
Hsin-Jung Wu ◽  
Yu-Jui Fan ◽  
Sheng-Siang Wang ◽  
Subramanian Sakthinathan ◽  
Te-Wei Chiu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Biomedical Application ◽  
Diffraction Field ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Interior Space ◽  
X Ray ◽  
Transmission Electron ◽  
Hollow Nanostructure ◽  
First Time

A hollow nanostructure is attractive and important in different fields of applications, for instance, solar cells, sensors, supercapacitors, electronics, and biomedical, due to their unique structure, large available interior space, low bulk density, and stable physicochemical properties. Hence, the need to prepare hollow nanotubes is more important. In this present study, we have prepared CuCrO2 hollow nanotubes by simple approach. The CuCrO2 hollow nanotubes were prepared by applying electrospun Al2O3 fibers as a template for the first time. Copper chromium ions were dip-coated on the surface of electrospun-derived Al2O3 fibers and annealed at 600 °C in vacuum to form Al2O3-CuCrO2 core-shell nanofibers. The CuCrO2 hollow nanotubes were obtained by removing Al2O3 cores by sulfuric acid wet etching while preserving the rest of original structures. The structures of the CuCrO2-coated Al2O3 core-shell nanofibers and CuCrO2 hollow nanotubes were identified side-by-side by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. The CuCrO2 hollow nanotubes may find applications in electrochemistry, catalysis, and biomedical application. This hollow nanotube preparation method could be extended to the preparation of other hollow nanotubes, fibers, and spheres.

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

Boron Nitride Nanotubes: Nanoparticles Functionalization and Junction Fabrication

2007 ◽  
Vol 7 (2) ◽  
pp. 530-534 ◽  
Author(s):  
Chunyi Zhi ◽  
Yoshio Bando ◽  
Guozhen Shen ◽  
Chengchun Tang ◽  
Dmitri Golberg
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Boron Nitride ◽  
Boron Nitride Nanotubes ◽  
X Ray Diffraction ◽  
Carbon Nanostructure ◽  
Wet Chemistry ◽  
X Ray ◽  
Transmission Electron ◽  
First Time

Adopting a wet chemistry method, Au and Fe3O4 nanoparticles were functionalized on boron nitride nanotubes (BNNTs) successfully for the first time. X-ray diffraction pattern and transmission electron microscopy were used to characterize the resultant products. Subsequently, a method was proposed to fabricate heterojunction structures based on the particle-functionalized BNNTs. As a demonstration, BNNT-carbon nanostructure, BNNT-ZnO and BNNT-Ga2O3 junctions were successfully fabricated using the functionalized particles as catalysts.

scholarly journals Formation of ZnO/Zn0.5Cd0.5Se Alloy Quantum Dots in the Presence of High Oleylamine Contents

Nanomaterials ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 999
Author(s):  
Yi-An Chen ◽  
Kuo-Hsien Chou ◽  
Yi-Yang Kuo ◽  
Cheng-Ye Wu ◽  
Po-Wen Hsiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Particle Size ◽  
X Ray Diffraction ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Average Size ◽  
Alloy Quantum Dots ◽  
First Time

To the best of our knowledge, this report presents, for the first time, the schematic of the possible chemical reaction for a one-pot synthesis of Zn0.5Cd0.5Se alloy quantum dots (QDs) in the presence of low/high oleylamine (OLA) contents. For high OLA contents, high-resolution transmission electron microscopy (HRTEM) results showed that the average size of Zn0.5Cd0.5Se increases significantly from 4 to 9 nm with an increasing OLA content from 4 to 10 mL. First, [Zn(OAc)2]–OLA complex can be formed by a reaction between Zn(OAc)2 and OLA. Then, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) data confirmed that ZnO is formed by thermal decomposition of the [Zn(OAc)2]–OLA complex. The results indicated that ZnO grew on the Zn0.5Cd0.5Se surface, thus increasing the particle size. For low OLA contents, HRTEM images were used to estimate the average sizes of the Zn0.5Cd0.5Se alloy QDs, which were approximately 8, 6, and 4 nm with OLA loadings of 0, 2, and 4 mL, respectively. We found that Zn(OAc)2 and OLA could form a [Zn(OAc)2]–OLA complex, which inhibited the growth of the Zn0.5Cd0.5Se alloy QDs, due to the decreasing reaction between Zn(oleic acid)2 and Se2−, which led to a decrease in particle size.

Synthesis of Trilaminar Core–Shell Au/α-Fe2O3@SnO2Nanocomposites and their Application for Nonenzymatic Dopamine Electrochemical Sensing

NANO ◽  
2019 ◽  
Vol 14 (11) ◽  
pp. 1950138 ◽  
Author(s):  
Sai Zhang ◽  
Shijun Yue ◽  
Jiajia Li ◽  
Jianbin Zheng ◽  
Guojie Gao
Keyword(s):  
Electron Microscopy ◽  
High Sensitivity ◽  
Electrochemical Sensing ◽  
Synthesis Process ◽  
Core Shell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Long Term Stability ◽  
Transmission Electron

Au nanoparticles anchored on core–shell [Formula: see text]-Fe2O3@SnO2 nanospindles were successfully constructed through hydrothermal synthesis process and used for fabricating a novel nonenzymatic dopamine (DA) sensor. The structure and morphology of the Au/[Formula: see text]-Fe2O3@SnO2 trilaminar nanohybrid film were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The electrochemical properties of the sensor were investigated by cyclic voltammetry and amperometry. The experimental results suggest that the composites have excellent catalytic property toward DA with a wide linear range from 0.5[Formula: see text][Formula: see text]M to 0.47[Formula: see text]mM, a low detection limit of 0.17[Formula: see text][Formula: see text]M (S/[Formula: see text]) and high sensitivity of 397.1[Formula: see text][Formula: see text]A[Formula: see text]mM[Formula: see text][Formula: see text]cm[Formula: see text]. In addition, the sensor exhibits long-term stability, good reproducibility and anti-interference.

scholarly journals Synthesis and Characterization of Nano-Tungsten Oxide Precipitated onto Natural Inorganic Clay for Humidity-Sensing Applications

Ceramics ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 120-127 ◽  
Author(s):  
Ahmed Afify ◽  
Ahmed Elsayed ◽  
Mohamed Hassan ◽  
Mohamed Ataalla ◽  
Amr Mohamed ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Tungsten Oxide ◽  
Diffraction Field ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Applications ◽  
Transmission Electron ◽  
Tungsten Oxide Nanoparticles ◽  
Inorganic Clay

A wet chemical method was used to obtain tungsten oxide nanoparticles from tungsten tetrachloride and natural microfibrous inorganic clay (sepiolite) as a starting material. Precipitation of tungsten oxide species onto sepiolite under basic conditions and subsequent thermal treatment was investigated, prompted by the abundance of sepiolite in nature and the useful environmental applications that could be attained. Laser granulometry, X-ray diffraction, field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), and high-resolution transmission electron microscopy (HR-TEM) techniques were used to study the particle-size distribution, the morphology, and the composition of the prepared sample. Our findings show the presence of tungsten oxide nanoparticles, which are less than 50 nm, on the needles of the modified sepiolite.

Preparation, Characterization and Spectroscopy of Eu3+ in Gd2O3 Nanorods

2008 ◽  
Vol 8 (3) ◽  
pp. 1398-1403 ◽  
Author(s):  
Liqin Liu ◽  
En Ma ◽  
Renfu Li ◽  
Xueyuan Chen
Keyword(s):  
Electron Microscopy ◽  
Fluorescence Spectra ◽  
Filling Factor ◽  
Energy Levels ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
Excitation Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Eu3+:Gd2O3 nanorods were prepared by a hydrothermal method. X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, and Fourier transform-infrared spectroscopy were used to characterize the resulting samples. Emission and excitation spectra were studied using xenon excited spectroscopic experiments at 10 K. Energy transfer from Gd3+ to Eu3+, from the band gap of the host to Eu3+, and from Eu3+ (S6) to Eu3+ (C2) was observed. The energy levels of Eu3+ at the C2 site of cubic Gd2O3 were experimentally determined according to the fluorescence spectra at 10 K, and fit well with the theoretical values. The standard deviation for the optimal fit was 12.9 cm−1. The fluorescent lifetime of 5D0 (2.3 ms at 295 K) was unusually longer than that of the bulk counterparts (0.94 ms), indicating a small filling factor (0.55) for the nanorod volume. However the lifetime of 5D1 was much shorter than that of the bulk counterparts, 65 μs at 10 K, 37 μs at 295 K.

Fabrication of boron carbonitride (BCN) nanotubes and giant fullerene cages

2010 ◽  
Vol 88 (12) ◽  
pp. 1256-1261 ◽  
Author(s):  
Guifang Sun ◽  
Faming Gao ◽  
Li Hou
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
The Novel ◽  
X Ray Diffraction ◽  
Boron Carbonitride ◽  
X Ray ◽  
Transmission Electron ◽  
New Form ◽  
First Time ◽  
Electron Energy Loss

Boron carbonitride (BCN) nanotubes have been successfully prepared using NH4Cl, KBH4, and ZnBr2 as the reactants at 480 °C for 12 h by a new benzene-thermal approach in a N2 atmosphere. As its by-product, a new form of carbon regular hexagonal nanocages are observed. The samples are characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), transmission electron diffraction (TED), electron energy loss spectroscopy (EELS), and high-resolution transmission electron microscopy (HRTEM). The prepared nanotubes have uniform outer diameters in the range of 150 to 500 nm and a length of up to several micrometerss. The novel carbon hexagonal nanocages have a typical size ranging from 100 nm to 1.5 µm, which could be the giant fullerene cages of [Formula: see text] (N = 17∼148). So, high fullerenes are observed for the first time. The influences of reaction temperature and ZnBr2 on products and the formation mechanism of BCN nanotubes are discussed.

scholarly journals Mechanism of Nanostructured Fluorapatite Formation from CaO, CaF2 and P2O5 Precursors by Mechanochemical Synthesis

2018 ◽  
Vol 43 (3-4) ◽  
pp. 201-210
Author(s):  
Raheleh Nikonam Mofrad ◽  
Sayed Khatiboleslam Sadrnezhaad ◽  
Jalil Vahdati Khaki
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mechanochemical Synthesis ◽  
Diffraction Field ◽  
Ambient Atmosphere ◽  
X Ray Diffraction ◽  
Powder Mixtures ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

We determined the mechanism of mechanochemical synthesis of fluorapatite from CaO, CaF2 and P2O5 by characterisation of the intermediate compounds. We used atomic absorption spectroscopy, X-ray diffraction, field emission scanning electron microscopy, FTIR spectroscopy and transmission electron microscopy to find the transitional compounds. Investigation of the binary and ternary powder mixtures revealed the appearance of H3PO4, Ca(OH)2, Ca2P2O7 and CaCO3 as the intermediate compounds. At early stages of the milling, conversions of P2O5 to H3PO4 and CaO to Ca(OH)2 occurred in the wet atmosphere. Later, a combination of Ca(OH)2 and H3PO4 formed C a2P2O7 while the unreacted CaO was converted to CaCO3 by CO2 of the ambient atmosphere. Spherical crystalline Ca10 (PO4)6F2 particles formed after 48 hours of milling due to the reaction between Ca2P2O7, CaCO3 and CaF2.

Enhancement of durability of NIR emission of Ag2S@ZnS QDs in water

2017 ◽  
Vol 31 (32) ◽  
pp. 1750297 ◽  
Author(s):  
M. Karimipour ◽  
M. Bagheri ◽  
M. Molaei
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Xrd Analysis ◽  
Core Shell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Nir Emission ◽  
Core Shell Structure ◽  
Phase Transmission

Stability of Ag2S@ZnS QDs in water is a crucial concern for their application in biology. In this work, both physical sustainability and emission stability of Ag2S QDs were enhanced using parameter optimization of a pulsed microwave irradiation (MI) method up to 105 days after their preparation. UV–Vis and photoluminescence spectroscopies depicted an absorption and emission about 817 nm and 878 nm, respectively. X-ray diffraction (XRD) analysis showed a growth of Ag2S acanthite phase. Transmission Electron Microscopy (TEM) images revealed a clear formation of Ag2S@ZnS core–shell structure.

Sign in / Sign up

Export Citation Format

Share Document