scholarly journals The Interactions and Release Kinetics of Sodium Hyaluronate Implemented in Nonionic and Anionic Polymeric Hydrogels, Studied by Immunoenzymatic ELISA Test

Pharmaceutics ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 58
Author(s):  
Dorota Wójcik-Pastuszka ◽  
Aleksandra Skrzypczyk ◽  
Witold Musiał
Keyword(s):  
Wound Healing ◽  
Release Kinetics ◽  
Sodium Hyaluronate ◽  
Elisa Test ◽  
Synthetic Polymer ◽  
Release Time ◽  
Scanning Calorimetry ◽  
Fixed Amount ◽  
Dsc Measurements ◽  
The Difference

Hyaluronan is a natural polymer that was introduced to wound therapy. Formulations based on synthetic polymers such as methylcellulose (MC) and polyacrylic acid (PA) containing hyaluronan (HA) were proposed for the development of prospective wound-healing preparations. The formulations of different carrier concentrations containing a fixed amount of HA were prepared, and their viscosity was measured. The HA release was evaluated by employing the apparatus paddle over a disc. The hydrogels were introduced to the donor chamber, and HA was released to the pH = 7.4 buffer. The amount of HA released was obtained using the ELISA test. The release was analyzed on the basis of different kinetic models: zero-, first-, and second-order kinetics, as well as Higuchi and Korsmeyer–Peppas equations. The release rate constants and the half release time were calculated from these equations. According to the value of the coefficient of the determination, the best model describing the observed process was selected. The comparison between the dissolution profiles was carried out by calculating the difference factor f1 and the similarity factor f2. The interaction between the hydrogel components was investigated by Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) measurements. The study revealed that the zero-order equation best described the release of HA from the formulations studied. The FTIR research and the DSC study showed the intermolecular interaction between HA chains in MC-based compositions, as well as between HA and the synthetic polymer in the PA-based formulations. The study revealed that the formulation with a higher concentration of synthetic polymer may prolong the release of HA. The obtained results indicated that the proposed hydrogels have potential for wound healing and may accelerate skin regeneration.

Silver sulfadiazine loaded breathable hydrogel sponge for wound healing

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Anamika Pandey ◽  
Munira Momin ◽  
Anita Chando
Keyword(s):  
Wound Healing ◽  
Drug Release ◽  
Ex Vivo ◽  
Release Kinetics ◽  
Antimicrobial Property ◽  
Morphological Characteristics ◽  
Silver Sulfadiazine ◽  
Scanning Calorimetry ◽  
Casting Technique

AbstractObjectivesPatients with serious injury need special care and treatment to control the infection, as wound sepsis is one of the major causes of death. Silver sulfadiazine (SSD) is widely used as an antimicrobial agent which promotes healing and re-epithelialization. However, due to certain drawbacks such as inflammation and cytotoxicity, the need for novel drug delivery modality emerges. The objective of this study was to develop natural polymeric (chitosan and gelatin) hydrogel sponges containing SSD and evaluate its efficacy in wound healing using animal models.MethodsSSD containing hydrogel sponges were prepared by solvent casting technique. Scanning electron microscopy (SEM) and Differential scanning calorimetry (DSC) were used to evaluate morphological characteristics of the hydrogel sponges. Anti-thrombogenic property, drug release studies, drug release kinetics, antimicrobial property, and wound healing effect were also studied in detail.ResultsThe optimized batch of hydrogel sponges (CG4) consists of 1% SSD wt., 10% wt. Gelatin, 1% wt. Chitosan and honey 7.5% wt. as plasticizer. At the 12th hour, in vitro and ex vivo drug release was found to be 76.994±0.67% and 24.22±0.57% respectively. CG4 batch had enhanced in vitro antimicrobial activity as compared to conventional marketed cream. The developed SSD hydrogel sponges showed a faster rate of wound healing as compared to a marketed cream. Animals treated with CG4 formulation showed complete angiogenesis and re-epithelialization by 8th day, whereas 12 days were required for complete wound healing with marketed cream.ConclusionsThe prepared hydrogel sponges can serve as a potential alternative for wound healing dressing as compared to the marketed product.

scholarly journals The Role of Hydrogen Bonding in Paracetamol–Solvent and Paracetamol–Hydrogel Matrix Interactions

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1842
Author(s):  
Marta Miotke-Wasilczyk ◽  
Marek Józefowicz ◽  
Justyna Strankowska ◽  
Jerzy Kwela
Keyword(s):  
Hydrogen Bonding ◽  
Dipole Moments ◽  
Release Kinetics ◽  
Spectroscopic Technique ◽  
Release Time ◽  
Solvent Interactions ◽  
Hydrogel Matrix ◽  
Matrix Interactions ◽  
The Difference

The photophysical and photochemical properties of antipyretic drug – paracetamol (PAR) and its two analogs with different substituents (acetanilide (ACT) and N-ethylaniline (NEA)) in 14 solvents of different polarity were investigated by the use of steady–state spectroscopic technique and quantum–chemical calculations. As expected, the results show that the spectroscopic behavior of PAR, ACT, and NEA is highly dependent on the nature of the solute–solvent interactions (non-specific (dipole-dipole) and specific (hydrogen bonding)). To characterize these interactions, the multiparameter regression analysis proposed by Catalán was used. In order to obtain a deeper insight into the electronic and optical properties of the studied molecules, the difference of the dipole moments of a molecule in the ground and excited state were determined using the theory proposed by Lippert, Mataga, McRae, Bakhshiev, Bilot, and Kawski. Additionally, the influence of the solute polarizability on the determined dipole moments was discussed. The results of the solvatochromic studies were related to the observations of the release kinetics of PAR, ACT, and NEA from polyurethane hydrogels. The release kinetics was analyzed using the Korsmayer-Peppas and Hopfenberg models. Finally, the influence of the functional groups of the investigated compounds on the release time from the hydrogel matrix was analyzed.

Gastroretentive System of Fluvastatin Sodium by Using Natural Mucilage and Synthetic Polymer

2014 ◽  
Vol 4 (2) ◽  
Author(s):  
Umamaheswara G. ◽  
Anudeep D.
Keyword(s):  
Half Life ◽  
Release Kinetics ◽  
Kinetic Studies ◽  
Diffusion Path ◽  
Synthetic Polymer ◽  
In Vitro Dissolution ◽  
Direct Compression ◽  
Drug Content ◽  
Biological Half Life

Fluvastatin sodium is a novel compound used as cholesterol lowering agent which acts through the inhibition of 3- hydroxyl-3- methyl glutaryl- coenzyme A (HMG-Co A) reductase. It has short biological half life (1-3h) in humans required a dosing frequency of 20 to 40mg twice a day. Due to its short variable biological half life it has been developed to a sustained gastroretentive system with a natural and synthetic polymer and to study how far the natural mucilage improves the sustained activity. Floating tablets were prepared by direct compression method using in combination of natural mucilage and synthetic polymer. Prior to the preparation of tablets the physical mixtures were subjected to FT IR studies and pre compression parameters. After preparation of tablets they were subjected to various tests like swollen index, drug content, In vitro dissolution and release kinetics with pcp disso software etc. The tablets prepared by direct compression shown good in thickness, hardness and uniformity in drug content, the prepared tablets floated more than 12h except FS1 and FS2 shows 9 and 11h. Swollen index studies shows with increase in concentration of polymer the swelling increases the diffusion path length by which the drug molecule may have to travel and cause lag time. In vitro results shows that on increasing the amount of hibiscus polymer the sustain activity is increased because of its integrity and forms a thick swollen mass and reduces the erosion property of the HypromelloseK100M, kinetic studies shows that FS 1, FS2, FS3 followed the Korsmeyer peppas model and the rest FS 4, FS 5, FS6 follows the zero order respectively. Based on n value indicating that the drug release followed super case II transport mechanism due to the erosion of the polymer.

Optimization Study to Develop Once-a-day Controlled Release Formulation of Metoclopramide with Predictable Design Space

1970 ◽  
Vol 1 (1) ◽  
pp. 71-76
Author(s):  
Rajesh Dubey ◽  
Udaya K. Chowdary ◽  
Venkateswarlu V.
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Design Space ◽  
Release Kinetics ◽  
Release Profile ◽  
Release Formulation ◽  
Linear Effect ◽  
Controlled Release Formulation ◽  
The Difference ◽  
Face Centered

A controlled release formulation of metoclopramide was developed using a combination of hypromellose (HPMC) and hydrogenated castor oil (HCO). Developed formulations released the drug over 20 hr with release kinetics following Higuchi model. Compared to HCO, HPMC showed significantly higher influence in controlling the drug release at initial as well as later phase. The difference in the influence can be explained by the different swelling and erosion behaviour of the polymers. Effect of the polymers on release was optimized using a face-centered central composite design to generate a predictable design space. Statistical analysis of the drug release at various levels indicated a linear effect of the polymers’ levels on the drug release. The release profile of formulations containing the polymer levels at extremes of their ranges in design space was found to be similar to the predicted release profile

scholarly journals β-Cyclodextrin/Triclosan Complex-Grafted Methacrylated Glycol Chitosan Hydorgel by Photocrosslinking via Visible Light Irradiation for a Tissue Bio-Adhesive

2021 ◽  
Vol 22 (2) ◽  
pp. 700
Author(s):  
Young Jae Moon ◽  
Sun-Jung Yoon ◽  
Jeung-Hyun Koo ◽  
Yihyun Yoon ◽  
Hye Jun Byun ◽  
...  
Keyword(s):  
Wound Healing ◽  
Bacterial Infection ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Light Irradiation ◽  
Tissue Adhesive ◽  
Proton Nuclear Magnetic Resonance ◽  
Scanning Calorimetry ◽  
Glycol Chitosan

Accelerating wound healing with minimized bacterial infection has become a topic of interest in the development of the new generation of tissue bio-adhesives. In this study, we fabricated a hydrogel system (MGC-g-CD-ic-TCS) consisting of triclosan (TCS)-complexed beta-cyclodextrin (β-CD)-conjugated methacrylated glycol chitosan (MGC) as an antibacterial tissue adhesive. Proton nuclear magnetic resonance (1H NMR) and differential scanning calorimetry (DSC) results showed the inclusion complex formation between MGC-g-CD and TCS. The increase of storage modulus (G’) of MGC-g-CD-ic-TCS after visible light irradiation for 200 s indicated its hydrogelation. The swollen hydrogel in aqueous solution resulted in two release behaviors of an initial burst and sustained release. Importantly, in vitro and in vivo results indicated that MGC-g-CD-ic-TCS inhibited bacterial infection and improved wound healing, suggesting its high potential application as an antibacterial tissue bio-adhesive.

scholarly journals Polypropylene/Lignin/POSS Nanocomposites: Thermal and Wettability Properties, Application in Water Remediation

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3950
Author(s):  
Abeer Alassod ◽  
Syed Rashedul Islam ◽  
Mina Shahriari Khalaji ◽  
Rogers Tusiime ◽  
Wanzhen Huang ◽  
...  
Keyword(s):  
Organic Liquid ◽  
Contact Angles ◽  
Water Remediation ◽  
Scanning Calorimetry ◽  
Water Contact ◽  
Thermally Induced ◽  
Dsc Measurements ◽  
Infrared Measurement ◽  
Oligomeric Silsesquioxane ◽  
Tga And Dsc

Compositing is an interesting strategy that has always been employed to introduce or enhance desired functionalities in material systems. In this paper, sponges containing polypropylene, lignin, and octavinyl-polyhedral oligomeric silsesquioxane (OV-POSS) were successfully prepared via an easy and elegant strategy called thermally induced phase separation (TIPS). To fully explore the behaviour of different components of prepared sponges, properties were characterized by a thermogravimetric analyser (TGA), differential scanning calorimetry (DSC), Fourier transform infrared measurement (FTIR), and scanning electron microscopy (SEM). Furthermore, wettability properties toward an organic liquid and oil were investigated. The FTIR analysis confirmed the chemical modification of the components. TGA and DSC measurements revealed thermal stability was much better with an increase in OV-POSS content. OV-POSS modified sponges exhibited ultra-hydrophobicity and high oleophilicity with water contact angles of more than 125°. The SEM revealed that POSS molecules acted as a support for reduced surface roughness. Moreover, OV-POSS-based blend sponges showed higher sorption capacities compared with other blend sponges without OV-POSS. The new blend sponges demonstrated a potential for use as sorbent engineering materials in water remediation.

scholarly journals Development of Spanish Broom and Flax Dressings with Glycyrrhetinic Acid-Loaded Films for Wound Healing: Characterization and Evaluation of Biological Properties

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1192
Author(s):  
Angela Abruzzo ◽  
Concettina Cappadone ◽  
Valentina Sallustio ◽  
Giovanna Picone ◽  
Martina Rossi ◽  
...  
Keyword(s):  
Wound Healing ◽  
Drug Loading ◽  
Healing Process ◽  
In Vitro Release ◽  
Sodium Hyaluronate ◽  
Biological Properties ◽  
Glycyrrhetinic Acid ◽  
Wound Dressings ◽  
Biological Studies

The selection of an appropriate dressing for each type of wound is a very important procedure for a faster and more accurate healing process. So, the aim of this study was to develop innovative Spanish Broom and flax wound dressings, as alternatives to cotton used as control, with polymeric films containing glycyrrhetinic acid (GA) to promote wound-exudate absorption and the healing process. The different wound dressings were prepared by a solvent casting method, and characterized in terms of drug loading, water uptake, and in vitro release. Moreover, biological studies were performed to evaluate their biocompatibility and wound-healing efficacy. Comparing the developed wound dressings, Spanish Broom dressings with GA-loaded sodium hyaluronate film had the best functional properties, in terms of hydration ability and GA release. Moreover, they showed a good biocompatibility, determining a moderate induction of cell proliferation and no cytotoxicity. In addition, the wound-healing test revealed that the Spanish Broom dressings promoted cell migration, further facilitating the closure of the wound.

scholarly journals Formulation and development of metformin-loaded microspheres using Khaya senegalensis (Meliaceae) gum as co-polymer

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Chukwuebuka H. Ozoude ◽  
Chukwuemeka P. Azubuike ◽  
Modupe O. Ologunagba ◽  
Sejoro S. Tonuewa ◽  
Cecilia I. Igwilo
Keyword(s):  
Controlled Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Scanning Calorimetry ◽  
Khaya Senegalensis

Abstract Background Khaya gum is a bark exudate from Khaya senegalensis (Maliaecae) that has drug carrier potential. This study aimed to formulate and comparatively evaluate metformin-loaded microspheres using blends of khaya gum and sodium alginate. Khaya gum was extracted and subjected to preformulation studies using established protocols while three formulations (FA; FB and FC) of metformin (1% w/v)-loaded microspheres were prepared by the ionic gelation method using 5% zinc chloride solution as the cross-linker. The formulations contained 2% w/v blends of khaya gum and sodium alginate in the ratios of 2:3, 9:11, and 1:1, respectively. The microspheres were evaluated by scanning electron microscopy, Fourier transform-infrared spectroscopy, differential scanning calorimetry, entrapment efficiency, swelling index, and in vitro release studies. Results Yield of 28.48%, pH of 4.00 ± 0.05, moisture content (14.59% ± 0.50), and fair flow properties (Carr’s index 23.68 ± 1.91 and Hausner’s ratio 1.31 ± 0.03) of the khaya gum were obtained. FTIR analyses showed no significant interaction between pure metformin hydrochloride with excipients. Discrete spherical microspheres with sizes ranging from 1200 to 1420 μm were obtained. Drug entrapment efficiency of the microspheres ranged from 65.6 to 81.5%. The release of the drug from microspheres was sustained for the 9 h of the study as the cumulative release was 62% (FA), 73% (FB), and 80% (FC). The release kinetics followed Korsmeyer-Peppas model with super case-II transport mechanism. Conclusion Blends of Khaya senegalensis gum and sodium alginate are promising polymer combination for the preparation of controlled-release formulations. The blend of the khaya gum and sodium alginate produced microspheres with controlled release properties. However, the formulation containing 2:3 ratio of khaya gum and sodium alginate respectively produced microspheres with comparable controlled release profiles to the commercial brand metformin tablet.

Investigations on the polymorphism and pseudopolymorphism of clobetasone butyrate

2011 ◽  
Vol 76 (5) ◽  
pp. 553-566
Author(s):  
Christian Näther ◽  
Inke Jeß
Keyword(s):  
Room Temperature ◽  
Polymorphic Form ◽  
Stable Form ◽  
Scanning Calorimetry ◽  
Amorphous Form ◽  
Space Group ◽  
Dsc Measurements ◽  
Independent Molecules ◽  
Solvent Molecules ◽  
Similar Conformation

Clobetasone butyrate was investigated for polymorphism and pseudopolymorphism. Solvent mediated conversion experiments reveal that the commercially available form I represent the thermodynamically most stable form at room temperature and DSC measurements shows that it should also be the most stable form until melting. Form I crystallizes in space groupP212121with three crystallographically independent molecules of similar conformation. From methanol an additional pseudo polymorphic form was discovered. In the crystal structure (space groupP212121) the solvent molecules are connected to the clobetasone butyrate molecules by O–H···O hydrogen bonding. Investigations of the solvate using thermogravimetry, differential thermoanalysis as well as differential scanning calorimetry proves, that on solvent removal an amorphous form is obtained that crystallizes into form I on further heating.

Effects of Aging on the Microstructure and Phase Transformation Behavior of Cu-Al-Mn Shape Memory Alloy

2021 ◽  
Vol 882 ◽  
pp. 21-27
Author(s):  
Seyed Veghar Seyedmohammadi ◽  
Amin Radi ◽  
Guney Guven Yapici
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Aging Treatment ◽  
Scanning Calorimetry ◽  
Dsc Measurements ◽  
Peak Aged Condition ◽  
Peak Aged ◽  
Rolled Condition ◽  
The One ◽  
Effects Of Aging

In the present work, the effects of artificial aging treatment on the transformation temperatures and hardness of Cu-Al-Mn shape memory alloy have been investigated. The aging processes have been performed on the one-time re-melted and 90% rolled samples. Differential scanning calorimetry reveals that reverse transformation is present for the re-melted sample which is aged at 400°C. However, in 90% rolled condition, this transformation takes place at 200°C and 300°C. Hardness examination shows that the aged specimens possess higher values in hardness in comparison to un-aged samples at all studied temperatures. Although, the peak-aged condition was demonstrated at 300°C for the re-melted sample, the rolled sample displayed increased hardness levels up to 500°C. Based on the DSC measurements and microstructural observations, it can be asserted that the thermo-mechanical processing including rolling plus aging at 300°C provides favorable transformation characteristics for shape memory behavior.

Sign in / Sign up

Export Citation Format

Share Document