Plasticization of Cottonseed Protein/Polyvinyl Alcohol Blend Films

The use of waste plant protein obtained from underutilized and non-food-producing plants may be a promising strategy in the development of bioactive packaging. A series of blend films were prepared by casting from cottonseed protein (CP) and poly(vinyl alcohol) (PVA) and modified with different plasticizers. The morphology, structure, and crystallinity of each of the blend films were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. CP and PVA were found to be compatible in the appropriate ratios, and the CP/PVA blend films were partially crystalline. We compared the effects that four plasticizers, i.e., glycerol, triethanolamine (TEA), ethylene glycol, and polyethylene glycol, had on the performance of the CP/PVA blend films. Plasticizers altered the degree of interaction between CP and PVA, which changed the secondary structure of the CP but had little effect on the crystallinity of CP/PVA blend films. Among the different plasticizers tested, TEA was the most efficient at improving the elongation at the break, tensile strength, and oxygen barrier properties of the CP/PVA blend films. Such CP/PVA blend films plasticized using TEA can, therefore, be considered emerging and promising plastics for potential applications in food packaging and flower planting applications.

Download Full-text

Preparation and Assessment of Heat-Treated α-Chitin Nanowhiskers Reinforced Poly(viny alcohol) Film for Packaging Application

Materials ◽

10.3390/ma11101883 ◽

2018 ◽

Vol 11 (10) ◽

pp. 1883 ◽

Cited By ~ 7

Author(s):

Chao Peng ◽

Guangxue Chen

Keyword(s):

Heat Treatment ◽

Composite Films ◽

Barrier Properties ◽

Mechanical Tests ◽

Light Transmittance ◽

Poly Vinyl Alcohol ◽

X Ray Diffraction ◽

X Ray ◽

Heat Treated ◽

Chitin Nanowhiskers

In this study, poly(vinyl alcohol) (PVA) composite films enhanced by α-chitin nanowhiskers (ChWs) were prepared through heat treatment. The obtained membranes were assessed by means of FTIR spectroscopy, X-ray diffraction, thermogravimetric analysis, regular light transmittance, mechanical tests, permeability and water absorption. The influence of the nano-component and heat treatment on the mechanical, thermal and water-resistant properties of the composite membrane were analyzed. From the results of the work, the produced films with excellent barrier properties and inexpensive raw processed materials have great prospects in packaging applications.

Download Full-text

Preparation and Physicochemical Properties of Blend Films of Feather Keratin and Poly(vinyl alcohol) Compatibilized by Tris(hydroxymethyl)aminomethane

Polymers ◽

10.3390/polym10101054 ◽

2018 ◽

Vol 10 (10) ◽

pp. 1054 ◽

Cited By ~ 7

Author(s):

Xunjun Chen ◽

Shufang Wu ◽

Minghao Yi ◽

Jianfang Ge ◽

Guoqiang Yin ◽

...

Keyword(s):

Mechanical Properties ◽

Vinyl Alcohol ◽

System Analysis ◽

Barrier Properties ◽

Contact Angles ◽

Poly Vinyl Alcohol ◽

Oxygen Barrier ◽

Elongation At Break ◽

Blend Films ◽

Feather Keratin

Blend films of feather keratin (FK) and synthetic poly(vinyl alcohol) (PVA) that were compatibilized by tris(hydroxymethyl)aminomethane (Tris) were successfully prepared by a solution-casting method. The scanning electron microscopy (SEM) results showed that a phase separation occurred in the FK/PVA/Tris blended system. Analysis by Fourier transform infrared spectroscopy indicated that the main interactions between the three components were hydrogen bonds. In addition, X-ray diffraction analysis showed that the FK/PVA/Tris blend films were partially crystalline. The barrier properties, mechanical properties, and contact angles of the FK/PVA/Tris films were investigated to determine the effects of the PVA and Tris concentrations. More specifically, upon increasing the PVA content, the elongation at break, the hydrophilicity, and the oxygen barrier properties were enhanced. However, at a constant PVA content, an increase in the Tris content caused the oxygen permeability and the contact angle to decrease, while the tensile strength, elongation at break, and oxygen barrier properties were enhanced. These results indicated that the mechanical properties and gas resistance of the FK/PVA/Tris blend films could be successfully improved using the method described herein, confirming that this route provided a convenient and promising means to prepare FK plastics for practical applications.

Download Full-text

Electrospun Nanosystems Based on PHBV and ZnO for Ecological Food Packaging

Polymers ◽

10.3390/polym13132123 ◽

2021 ◽

Vol 13 (13) ◽

pp. 2123

Author(s):

Maria Râpă ◽

Maria Stefan ◽

Paula Popa ◽

Dana Toloman ◽

Cristian Leostean ◽

...

Keyword(s):

Food Packaging ◽

Spin Trapping ◽

X Ray Diffraction ◽

Paramagnetic Resonance ◽

Hno3 Solution ◽

X Ray ◽

Trapping Method ◽

Ft Ir ◽

Doped Zno ◽

Electron Paramagnetic

The electrospun nanosystems containing poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and 1 wt% Fe doped ZnO nanoparticles (NPs) (with the content of dopant in the range of 0–1 wt% Fe) deposited onto polylactic acid (PLA) film were prepared for food packaging application. They were investigated by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), antimicrobial analysis, and X-ray photoelectron spectrometry (XPS) techniques. Migration studies conducted in acetic acid 3% (wt/wt) and ethanol 10% (v/v) food simulants as well as by the use of treated ashes with 3% HNO3 solution reveal that the migration of Zn and Fe falls into the specific limits imposed by the legislation in force. Results indicated that the PLA/PHBV/ZnO:Fex electrospun nanosystems exhibit excellent antibacterial activity against the Pseudomonas aeruginosa (ATCC-27853) due to the generation of a larger amount of perhydroxyl (˙OOH) radicals as assessed using electron paramagnetic resonance (EPR) spectroscopy coupled with a spin trapping method.

Download Full-text

Laser-Induced Deposition of Plasmonic Ag and Pt Nanoparticles, and Periodic Arrays

Materials ◽

10.3390/ma14010010 ◽

2020 ◽

Vol 14 (1) ◽

pp. 10

Author(s):

Daria V. Mamonova ◽

Anna A. Vasileva ◽

Yuri V. Petrov ◽

Denis V. Danilov ◽

Ilya E. Kolesnikov ◽

...

Keyword(s):

Substrate Surface ◽

Pt Nanoparticles ◽

Single Step ◽

X Ray Diffraction ◽

Ag Nps ◽

X Ray ◽

Periodic Arrays ◽

Potential Applications ◽

Surface Decoration ◽

Wide Potential

Surfaces functionalized with metal nanoparticles (NPs) are of great interest due to their wide potential applications in sensing, biomedicine, nanophotonics, etc. However, the precisely controllable decoration with plasmonic nanoparticles requires sophisticated techniques that are often multistep and complex. Here, we present a laser-induced deposition (LID) approach allowing for single-step surface decoration with NPs of controllable composition, morphology, and spatial distribution. The formation of Ag, Pt, and mixed Ag-Pt nanoparticles on a substrate surface was successfully demonstrated as a result of the LID process from commercially available precursors. The deposited nanoparticles were characterized with SEM, TEM, EDX, X-ray diffraction, and UV-VIS absorption spectroscopy, which confirmed the formation of crystalline nanoparticles of Pt (3–5 nm) and Ag (ca. 100 nm) with plasmonic properties. The advantageous features of the LID process allow us to demonstrate the spatially selective deposition of plasmonic NPs in a laser interference pattern, and thereby, the formation of periodic arrays of Ag NPs forming diffraction grating

Download Full-text

Characterization and A Preliminary Study of TiO2 Synthesis from Lampung Iron Sand

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.849.113 ◽

2020 ◽

Vol 849 ◽

pp. 113-118

Author(s):

Yayat Iman Supriyatna ◽

Slamet Sumardi ◽

Widi Astuti ◽

Athessia N. Nainggolan ◽

Ajeng W. Ismail ◽

...

Keyword(s):

Food Packaging ◽

Xrd Analysis ◽

Major Elements ◽

Raw Material ◽

Solid Residue ◽

X Ray Diffraction ◽

X Ray ◽

Leaching Solution ◽

Ti Content

The purpose of this study is to characterize Lampung iron sand and to conduct preliminary experiments on the TiO2 synthesis which can be used for the manufacturing of functional food packaging. The iron sand from South Lampung Regency, Lampung Province that will be utilized as raw material. The experiment was initiated by sieving the iron sand on 80, 100, 150, 200 and 325 mesh sieves. Analysis using X-Ray Fluorescence (XRF) to determine the element content and X-Ray Diffraction (XRD) to observe the mineralization of the iron sand was conducted. The experiment was carried out through the stages of leaching, precipitation, and calcination. Roasting was applied firstly by putting the iron sand into the muffle furnace for 5 hours at a temperature of 700°C. Followed by leaching using HCl for 48 hours and heated at 105°C with a stirring speed of 300 rpm. The leaching solution was filtered with filtrate and solid residue as products. The solid residue was then leached using 10% H2O2 solution. The leached filtrate was heated at 105°C for 40 minutes resulting TiO2 precipitates (powder). Further, the powder was calcined and characterized. Characterization of raw material using XRF shows the major elements of Fe, Ti, Mg, Si, Al and Ca. The highest Ti content is found in mesh 200 with 9.6%, while iron content is about 80.7%. While from the XRD analysis, it shows five mineral types namely magnetite (Fe3O4), Rhodonite (Mn, Fe, Mg, Ca) SiO3, Quart (SiO2), Ilmenite (FeOTiO2) and Rutile (TiO2). The preliminary experiment showed that the Ti content in the synthesized TiO2 powder is 21.2%. The purity of TiO2 is low due to the presence of Fe metal which is dissolved during leaching, so that prior to precipitation purification is needed to remove impurities such as iron and other metals.

Download Full-text

Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

Journal of Nanomaterials ◽

10.1155/2015/864864 ◽

2015 ◽

Vol 2015 ◽

pp. 1-6 ◽

Cited By ~ 10

Author(s):

Yan Ye ◽

Da Yin ◽

Bin Wang ◽

Qingwen Zhang

Keyword(s):

Electron Microscopy ◽

Photoelectron Spectroscopy ◽

3D Structure ◽

Three Dimensional ◽

X Ray Diffraction ◽

X Ray ◽

Graphene Aerogels ◽

Transmission Electron ◽

Potential Applications ◽

Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

Download Full-text

Hydrothermal synthesis, crystal structure and properties of a two-dimensional uranyl coordination polymer based on a flexible zwitterionic ligand

Acta Crystallographica Section C Structural Chemistry ◽

10.1107/s2053229618002279 ◽

2018 ◽

Vol 74 (3) ◽

pp. 366-371 ◽

Cited By ~ 1

Author(s):

Wen Cui ◽

Ruyu Wang ◽

Xi Shu ◽

Yu Fan ◽

Yang Liu ◽

...

Keyword(s):

Coordination Polymer ◽

Hydrothermal Reaction ◽

Two Dimensional ◽

X Ray Diffraction ◽

Uranyl Compounds ◽

X Ray ◽

Potential Applications ◽

Ft Ir ◽

Fuel Reprocessing ◽

Ft Ir Spectroscopy

The interaction between the uranyl cation, (UO2)2+, and organic species is of interest due to the potential applications of the resulting compounds with regard to nuclear waste disposal and nuclear fuel reprocessing. The hydrothermal reaction of various uranyl compounds with flexible zwitterionic 1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate) dihydrochloride (Bpmb·2HCl) in deionized water containing drops of H2SO4resulted in the formation of a novel two-dimensional uranyl coordination polymer, namely poly[tetraoxido{μ2-1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate)}di-μ3-sulfato-diuranium(VI)], [(UO2)2(SO4)2(C20H16N2O4)]n, (1). Single-crystal X-ray diffraction reveals that this coordination polymer exhibits a layered arrangement and the (UO2)2+centre is coordinated by five equatorial O atoms. The structure was further characterized by FT–IR spectroscopy, powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA). The polymer shows high thermal stability up to 696 K. Furthermore, the photoluminescence properties of (1) has also been studied, showing it to exhibit a typical uranyl fluorescence.

Download Full-text

Coating thickness determination in highly absorbent core–shell systems

Journal of Applied Crystallography ◽

10.1107/s0021889812031159 ◽

2012 ◽

Vol 45 (5) ◽

pp. 906-913 ◽

Cited By ~ 10

Author(s):

Herve Palancher ◽

Anne Bonnin ◽

Veijo Honkimäki ◽

Heikki Suhonen ◽

Peter Cloetens ◽

...

Keyword(s):

Coating Thickness ◽

Protective Layer ◽

Test Sample ◽

High Energy ◽

Core Shell ◽

Single Shot ◽

X Ray Diffraction ◽

X Ray ◽

Alloy Particles ◽

Potential Applications

This article describes a single-shot methodology to derive an average coating thickness in multi-particle core–shell systems exhibiting high X-ray absorption. Powder composed of U–Mo alloy particles surrounded by a micrometre-thick UO2protective layer has been used as a test sample. Combining high-energy X-ray diffraction and laser granulometry, the average shell thickness could be accurately characterized. These results have been validated by additional measurements on single particles by two techniques: X-ray nanotomography and high-energy X-ray diffraction. The presented single-shot approach gives rise to many potential applications on core–shell systems and in particular on as-fabricated heterogeneous nuclear fuels.

Download Full-text

W-Doped VO2 (M) with Tunable Phase Transition Temperature

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.320.483 ◽

2013 ◽

Vol 320 ◽

pp. 483-487 ◽

Cited By ~ 1

Author(s):

Ming Li ◽

Deng Bing Li ◽

Jing Pan ◽

Guang Hai Li

Keyword(s):

Electron Microscopy ◽

Phase Transition ◽

Transition Temperature ◽

Phase Transition Temperature ◽

Variable Temperature ◽

X Ray Diffraction ◽

X Ray ◽

Infrared Transmittance ◽

Transmission Electron ◽

Potential Applications

W-doped VO2 (B) nanoneedles were successfully synthesized by solgel combing with hydrothermal treatment, in which the polyethylene glycol (PEG) was used as both surfactant and reducing. The metastable VO2 (B) was completely transformed to thermochromic VO2 (M) after annealing at high purity N2 atmosphere. The DSC results exhibit a strong crystallographic transition, and the phase transition temperature of VO2 (M) can be reduced to about 38 °C by W-doping. Field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) were used to characterize the morphology and crystalline structure of the samples. The variable-temperature infrared transmittance spectra of VO2 (M) demonstrate their potential applications in energy saving field.

Download Full-text

A new twofold interpenetrated two-dimensional cadmium(II) coordination polymer constructed from 2,2′-(benzene-1,4-dicarboxamido)dipropionate

Acta Crystallographica Section C Structural Chemistry ◽

10.1107/s2053229618013967 ◽

2018 ◽

Vol 74 (11) ◽

pp. 1434-1439

Author(s):

Hong-Tao Zhang ◽

Xiao-Long Wang

Keyword(s):

Coordination Polymer ◽

Coordination Polymers ◽

Self Assembly ◽

Fluorescence Emission ◽

Functional Materials ◽

Two Dimensional ◽

X Ray Diffraction ◽

X Ray ◽

Carboxylate Groups ◽

Potential Applications

In recent years, much initial interest and enthusiasm has focused on the self-assembly of coordination polymers due to the aesthetics of their crystalline architectures and their potential applications as new functional materials. As part of an exploration of chiral coordination polymers, a new twofold interpenetrated two-dimensional (2D) coordination polymer, namely, poly[[tetraaquabis[μ3-(2R,2′R)-2,2′-(benzene-1,4-dicarboxamido)dipropionato-κ5 O,O′:O′′,O′′′:O′′]dicadmium(II)] trihydrate], {[Cd2(C14H14N2O6)2(H2O)4]·3H2O} n , has been synthesized by the reaction of Cd(CH3COO)2·2H2O with the designed ligand (2R,2′R)-2,2′-(benzene-1,4-dicarboxamido)dipropionic acid (H2 L). The compound has been structurally characterized by elemental analysis, IR spectroscopy, powder X-ray diffraction and single-crystal X-ray diffraction analysis. In the crystal structure, each CdII cation binds to three carboxylate groups from two crystallographically independent L 2− dianions. Four carboxylate groups link two crystallographically independent cadmium cations into a 4,4-connected secondary building unit (SBU). The resulting SBUs are extended into a two-dimensional folding sheet via the terephthalamide moiety of the ligand as a spacer, which can be simplified as a (4,4)-connected 4,4L15 net with the point symbol (3.53.62)(32.52.62). In the lattice, two independent folding sheets interpenetrate each other to yield a double-sheet layer. The resulting 2D layers pack in parallel arrays through intermolecular hydrogen bonds and interlayer π–π interactions. The thermal stability and photoluminescence properties of the title compound have been investigated and it exhibits an enhanced fluorescence emission and a longer lifetime compared with free H2 L.

Download Full-text