scholarly journals Ciprofloxacin-Modified Degradable Hybrid Polyurethane-Polylactide Porous Scaffolds Developed for Potential Use as an Antibacterial Scaffold for Regeneration of Skin

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 171 ◽  
Author(s):  
Carayon Iga ◽  
Terebieniec Agata ◽  
Łapiński Marcin ◽  
Filipowicz Natalia ◽  
Kucińska-Lipka Justyna
Keyword(s):  
Mechanical Characteristics ◽  
Antimicrobial Properties ◽  
Porous Scaffolds ◽  
Wound Infections ◽  
Degradable Polymer ◽  
Degradation Rates ◽  
And Staphylococcus Aureus ◽  
Regeneration Of Skin ◽  
Potential Use ◽  
Growth Of Bacteria

The aim of the performed study was to fabricate an antibacterial and degradable scaffold that may be used in the field of skin regeneration. To reach the degradation criterion for the biocompatible polyurethane (PUR), obtained by using amorphous α,ω-dihydroxy(ethylene-butylene adipate) macrodiol (PEBA), was used and processed with so-called “fast-degradable” polymer polylactide (PLA) (5 or 10 wt %). To meet the antibacterial requirement obtained, hybrid PUR-PLA scaffolds (HPPS) were modified with ciprofloxacin (Cipro) (2 or 5 wt %) and the fluoroquinolone antibiotic inhibiting growth of bacteria, such as Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus, which are the main causes of wound infections. Performed studies showed that Cipro-modified HPPS, obtained by using 5% of PLA, possess suitable mechanical characteristics, morphology, degradation rates, and demanded antimicrobial properties to be further developed as potential scaffolds for skin tissue engineering.

scholarly journals Ciprofloxacin – Modified Degradable Hybrid Polyurethane-Polylactide Porous Scaffolds Developed for Potential Use as an Antibacterial Scaffold for Regeneration of Skin

2019 ◽  
Author(s):  
Iga Carayon ◽  
Agata Terebieniec ◽  
Marcin Łapiński ◽  
Natalia Filipowicz ◽  
Justyna Kucińska-Lipka
Keyword(s):  
Antimicrobial Properties ◽  
Skin Tissue ◽  
Porous Scaffolds ◽  
Characteristic Functional ◽  
Tissue Scaffold ◽  
X Ray ◽  
Elementary Analysis ◽  
And Staphylococcus Aureus ◽  
Regeneration Of Skin ◽  
Potential Use

The aim of performed studies was to fabricate an antibacterial and degradable scaffold that may be used in the field of skin regeneration. To reach the degradation criterion the biocompatible polyurethane (PUR), obtained by using amorphous macrodiol α,ω-dihydroxy(ethylene-butylene adipate) macrodiol (PEBA), was used and processed with so-called “fast-degradable” polymer polylactide (PLA) (5 wt% or 10 wt%). To meet the antibacterial requirement obtained hybrid PUR-PLA scaffolds (HPPS) were modified with ciprofloxacin (Cipro) (2 wt% or 5 wt%), the fluoroquinolone antibiotic inhibiting growth of bacteria such as Pseudomonas aeruginosa, Escherichia Coli and Staphylococcus aureus, which are main cause of wound infections. Obtained unmodified and Cipro-modified HPPS were studied towards their chemical composition to detect presence or absence of characteristic functional groups of PUR, PLA and Cipro, and as well to indicate the participation of hydrogen bonds in the HPPS structure in dependence on PLA addition and ciprofloxacin modification. Mechanical properties were studied to determine the possible application of HPPS as a skin tissue scaffold. Scanning electron microscopy (SEM) was used to study morphology of unmodified and Cipro-modified HPPS and to performed elementary analysis by using energy-dispersive x-ray spectroscopy (EDX) of obtained materials. Finally, the microbiological tests were performed to indicate the antibacterial effect of Cipro-modified HPPS on S.aureus growth. Performed studies showed that Cipro-modified HPPS, obtained by using 5 % of PLA, possess suitable mechanical characteristic, morphology, degradation rate and demanded antimicrobial properties to be further developed as a potential scaffolds for skin tissue engineering.

scholarly journals Sulfaquinoxaline Oxidation and Toxicity Reduction by Photo-Fenton Process

2021 ◽  
Vol 18 (3) ◽  
pp. 1005
Author(s):  
Vanessa Ribeiro Urbano ◽  
Milena Guedes Maniero ◽  
José Roberto Guimarães ◽  
Luis J. del Valle ◽  
Montserrat Pérez-Moya
Keyword(s):  
Escherichia Coli ◽  
Staphylococcus Aureus ◽  
Pilot Plant ◽  
Environmental Water ◽  
Fenton Process ◽  
Experimental Conditions ◽  
Laboratory Bench ◽  
Degradation Rates ◽  
Bacterial Growth Inhibition ◽  
And Staphylococcus Aureus

Sulfaquinoxaline (SQX) has been detected in environmental water samples, where its side effects are still unknown. To the best of our knowledge, its oxidation by Fenton and photo-Fenton processes has not been previously reported. In this study, SQX oxidation, mineralization, and toxicity (Escherichia coli and Staphylococcus aureus bacteria) were evaluated at two different setups: laboratory bench (2 L) and pilot plant (15 L). The experimental design was used to assess the influence of the presence or absence of radiation source, as well as different H2O2 concentrations (94.1 to 261.9 mg L−1). The experimental conditions of both setups were: SQX = 25 mg L−1, Fe(II) = 10 mg L−1, pH 2.8 ± 0.1. Fenton and photo-Fenton were suitable for SQX oxidation and experiments resulted in higher SQX mineralization than reported in the literature. For both setups, the best process was the photo-Fenton (178.0 mg L−1 H2O2), for which over 90% of SQX was removed, over 50% mineralization, and bacterial growth inhibition less than 13%. In both set-ups, the presence or absence of radiation was equally important for sulfaquinoxaline oxidation; however, the degradation rates at the pilot plant were between two to four times higher than the obtained at the laboratory bench.

scholarly journals Sputter-Deposited Ag Nanoparticles on Electrospun PCL Scaffolds: Morphology, Wettability and Antibacterial Activity

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 345
Author(s):  
Daniele Valerini ◽  
Loredana Tammaro ◽  
Roberta Vitali ◽  
Gloria Guillot ◽  
Antonio Rinaldi
Keyword(s):  
Ag Nanoparticles ◽  
Food Packaging ◽  
Antimicrobial Agents ◽  
Antimicrobial Properties ◽  
Deposition Process ◽  
Polymer Fibers ◽  
Antibacterial Action ◽  
Porous Scaffolds ◽  
Electrospinning Technique ◽  
Sputtering Deposition

Porous scaffolds made of biocompatible and environmental-friendly polymer fibers with diameters in the nano/micro range can find applications in a wide variety of sectors, spanning from the biomedical field to textiles and so on. Their development has received a boost in the last decades thanks to advances in the production methods, such as the electrospinning technique. Conferring antimicrobial properties to these fibrous structures is a primary requirement for many of their applications, but the addition of antimicrobial agents by wet methods can present a series of drawbacks. In this work, strong antibacterial action is successfully provided to electrospun polycaprolactone (PCL) scaffolds by silver (Ag) addition through a simple and flexible way, namely the sputtering deposition of silver onto the PCL fibers. SEM-EDS analyses demonstrate that the polymer fibers get coated by Ag nanoparticles without undergoing any alteration of their morphological integrity upon the deposition process. The influence on wettability is evaluated with polar (water) and non-polar (diiodomethane) liquids, evidencing that this coating method allows preserving the hydrophobic character of the PCL polymer. Excellent antibacterial action (reduction > 99.995% in 4 h) is demonstrated against Escherichia coli. The easy fabrication of these PCL-Ag mats can be applicable to the production of biomedical devices, bioremediation and antifouling systems in filtration, personal protective equipment (PPE), food packaging materials, etc.

scholarly journals Zinc(II) Complexes with Amino Acids for Potential Use in Dermatology: Synthesis, Crystal Structures, and Antibacterial Activity

Molecules ◽  
2020 ◽  
Vol 25 (4) ◽  
pp. 951 ◽  
Author(s):  
Michał Abendrot ◽  
Lilianna Chęcińska ◽  
Joachim Kusz ◽  
Katarzyna Lisowska ◽  
Katarzyna Zawadzka ◽  
...  
Keyword(s):  
Amino Acids ◽  
Antibacterial Activity ◽  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
X Ray Diffraction ◽  
Organic Zinc ◽  
Counter Ions ◽  
Open Issue ◽  
Potential Use ◽  
Active Substances

The multifunctional profile of Zn2+ has influenced its great popularity in various pharmaceutical, food, and cosmetic products. Despite the use of different inorganic and organic zinc derivatives, the search for new zinc-containing compounds with a safer skin profile still remains an open issue. The present paper describes the synthesis, structural characterization, and antibacterial activity of zinc(II) complexes with proteinogenic amino acids as potential candidates for dermatological treatments. The obtained complexes are of the general formula [Zn(AA)2], where AA represents an amino acid (L-Glu, Gly, L-His, L-Pro, L-Met, and L-Trp). Their synthesis was designed in such a way that the final bis(aminoacidate) zinc(II) complexes did not contain any counter-ions such as Cl−, NO3−, or SO42− that can cause some skin irritations. The chemical structure and composition of the compounds were identified by 1H NMR spectroscopy and elemental analysis, and four were also characterized by single-crystal X-ray diffraction. The Hirshfeld surface analysis for the Zn2+ metallic center helped to determine its coordination number and geometry for each complex. Finally, the antibacterial properties of the complexes were determined with respect to three Gram-positive strains, viz. Staphylococcus aureus ATCC 6538, Staphylococcus epidermidis ATCC 12228, and Streptococcus pyogenes ATCC 19615, and two Gram-negative bacteria, viz. Escherichia coli ATCC 25992 and Pseudomonas aeruginosa ATCC 27853, and were compared with the activity of zinc 2-pirrolidone 5-carboxylate (ZnPCA), commonly applied in dermatology. It was found that the Zn(II) complexes with methionine and glycine exhibited a higher antibacterial activity than the tested standard, and the antimicrobial properties of complex with Trp were satisfactory. The results of the antimicrobial activity examination allow us to postulate that the obtained zinc complexes might become new active substances for use in dermatological products.

scholarly journals Precise nanofiltration in a fouling-resistant self-assembled membrane with water-continuous transport pathways

2019 ◽  
Vol 5 (8) ◽  
pp. eaav9308 ◽  
Author(s):  
Xunda Feng ◽  
Qaboos Imran ◽  
Yizhou Zhang ◽  
Lucas Sixdenier ◽  
Xinglin Lu ◽  
...  
Keyword(s):  
Continuous Medium ◽  
Antimicrobial Properties ◽  
High Fidelity ◽  
Size Selectivity ◽  
Transport Pathways ◽  
Selective Transport ◽  
Novel Approach ◽  
Nanostructured Polymer ◽  
Self Assembled ◽  
Potential Use

Self-assembled materials are attractive for next-generation membranes. However, the need to align self-assembled nanostructures (e.g. cylinders, lamellae) and the narrow stability windows for ordered bicontinuous systems present serious challenges. We propose and demonstrate a novel approach that circumvents these challenges by exploiting size-selective transport in the water-continuous medium of a nanostructured polymer templated from a self-assembled lyotropic H1 mesophase. Optimization of the mesophase composition enables high-fidelity retention of the H1 structure on photoinduced cross-linking. The resulting material is a mechanically robust nanostructured polymer possessing internally and externally cross-linked nanofibrils surrounded by a continuous aqueous medium. Fabricated membranes show size selectivity at the 1- to 2-nm length scale and water permeabilities of ~10 liters m−2 hour−1 bar−1 μm. Moreover, the membranes display excellent antimicrobial properties due to the quaternary ammonium groups on the nanofibril surfaces. These results represent a breakthrough for the potential use of polymerized lyotropic mesophase membranes in practical water purification applications.

Strontium-modification of porous scaffolds from mineralized collagen for potential use in bone defect therapy

2018 ◽  
Vol 84 ◽  
pp. 159-167 ◽  
Author(s):  
Mandy Quade ◽  
Matthias Schumacher ◽  
Anne Bernhardt ◽  
Anja Lode ◽  
Marian Kampschulte ◽  
...  
Keyword(s):  
Bone Defect ◽  
Porous Scaffolds ◽  
Potential Use ◽  
Mineralized Collagen

Abstracts of the 5th International Conference on Lactoferrin / Résumés du 5e symposium internationeige sur la lactoferrin

2002 ◽  
Vol 80 (1) ◽  
pp. 137-168
Keyword(s):  
Gene Expression ◽  
Cancer Treatment ◽  
Structure Function ◽  
Gene Expression Regulation ◽  
Three Dimensional ◽  
Antimicrobial Properties ◽  
Dimensional Structure ◽  
International Conference ◽  
Immunological Effects ◽  
Potential Use

Sixty-three abstracts are presented from the 5th International Conference on Lactoferrin "Structure, Function and Applications" in Banff, Alberta. The conference focused on lactoferrin’s three-dimensional structure, antimicrobial properties, immunological effects, potential use in cancer treatment, gene expression regulation, and receptors.

Marine glycosaminoglycan-like carbohydrates as potential drug candidates for infectious disease

2018 ◽  
Vol 46 (4) ◽  
pp. 919-929 ◽  
Author(s):  
Courtney J. Mycroft-West ◽  
Edwin A. Yates ◽  
Mark A. Skidmore
Keyword(s):  
Infectious Disease ◽  
Antimicrobial Properties ◽  
Marine Species ◽  
Host Cells ◽  
Host Immune System ◽  
Potential Drug ◽  
Drug Candidates ◽  
Disease States ◽  
Cellular Attachment ◽  
Potential Use

Glycosaminoglycans (GAGs), present in the extracellular matrix, are exploited by numerous, distinct microbes for cellular attachment, adhesion, invasion and evasion of the host immune system. Glycosaminoglycans, including the widely used, clinical anticoagulant heparin and semi-synthetic analogues thereof, have been reported to inhibit and disrupt interactions between microbial proteins and carbohydrates present on the surface of host cells. However, the anticoagulant properties of unmodified, pharmaceutical heparin preparations preclude their capabilities as therapeutics for infectious disease states. Here, unique Glycosaminoglycan-like saccharides from various, distinct marine species are reported for their potential use as therapeutics against infectious diseases; many of which possess highly attenuated anticoagulant activities, while retaining significant antimicrobial properties.

scholarly journals Bactericidal activites of selected macrofungi extracts against Staphylococcus aureus

2017 ◽  
pp. 193-200
Author(s):  
Daniela Nikolovska-Nedelkoska ◽  
Natalija Atanasova-Pancevska ◽  
Mitko Karadelev ◽  
Dzoko Kungulovski
Keyword(s):  
Staphylococcus Aureus ◽  
Bactericidal Activity ◽  
Minimum Bactericidal Concentration ◽  
Antimicrobial Properties ◽  
Antimicrobial Activities ◽  
Specific Response ◽  
Hostile Environment ◽  
Microdilution Method ◽  
Polypore Fungi ◽  
Potential Use

The increasing of the antibiotic resistance exhibited by pathogenic microorganisms has resulted in research directed toward evaluation of novel sources of antimicrobial compounds. Previous studies have indicated that macrofungi, as a specific response to the natural hostile environment, produce secondary metabolites with antimicrobial properties. In this study, antimicrobial activities of the extracts from six wild mushrooms: Amanita echinocephala, Russula medulata, Cerena unicolor, Hericium erinaceus, Ishnoderma benzoinum and Laetiporus sulphureus were evaluated against Grampositive bacterium Staphylococcus aureus. The antimicrobial potential of the methanolic mushroom extracts was investigated by the microdilution method. Antimicrobial activity was observed in all species included in the study. All the extracts that demonstrated inhibitory activities were further tested for bactericidal activity and minimum bactericidal concentration (MBC) values were determined. The tested microorganism was most sensitive to the examined extracts from the polypore fungi C. unicolor and H. erinaceus. The highest bactericidal activity was obtained in the extracts from the species C. unicolor (MBC=1.563 mg/mL). The experimental results revealed that the methanolic extract of C. unicolor possessed significant bactericidal activity. The findings suggest the potential use of this wild mushroom as antimicrobial agent.

scholarly journals Influence of the Ultrasonic Treatment on the Properties of Polybutylene Adipate Terephthalate, Modified by Antimicrobial Additive

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2412
Author(s):  
Irina Kirsh ◽  
Yuliya Frolova ◽  
Olga Beznaeva ◽  
Olga Bannikova ◽  
Marina Gubanova ◽  
...  
Keyword(s):  
Polymer Matrix ◽  
Ultrasonic Treatment ◽  
Food Packaging ◽  
Mechanical Characteristics ◽  
Antimicrobial Properties ◽  
Point Of View ◽  
Bark Extract ◽  
Birch Bark ◽  
Modified Polymer ◽  
Antimicrobial Additive

Particular attention is paid to biodegradable materials from the environmental point of view and antimicrobial materials that ensure the microbiological safety of packaged products. The aim of the work was to study the properties of the composition, based on biodegradable polybutylene adipate terephthalate (PBAT) and the antimicrobial additive—birch bark extract (BBE). Test samples of materials were obtained on the laboratory extruder by extrusion with ultrasonic treatment of the melt. The concentration of the antimicrobial additive in the polymer matrix was 1 wt %. A complex research was carried out to study the structural, physico–mechanical characteristics, antimicrobial properties and biodegradability of the modified PBAT. Comparative assessment of the physico–mechanical characteristics of samples based on PBAT showed that the strength and elongation at break indices slightly decrease when the ultrasonic treatment of the melt is introduced. It was found out, that the antimicrobial additive in the composition of the polymer matrix at the concentration of 1 wt % has a static effect on the development of microorganisms on the surface of the studied modified films. Studies of the biodegradability of modified PBAT by composting for 4 months have shown that the decomposition period of modified materials increased, compared to pure PBAT. The developed modified polymer material can be recommended as an alternative replacement for materials based on polyethylene for food packaging.

Sign in / Sign up

Export Citation Format

Share Document