scholarly journals Study on Viscoelastic Properties of Asphalt Mixtures Incorporating SBS Polymer and Basalt Fiber under Freeze–Thaw Cycles

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1804
Author(s):  
Wensheng Wang ◽  
Guojin Tan ◽  
Chunyu Liang ◽  
Yong Wang ◽  
Yongchun Cheng
Keyword(s):  
Viscoelastic Properties ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Freeze Thaw ◽  
Static Creep ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Static Creep Test ◽  
Butadiene Styrene

This study aims to study the viscoelastic properties of asphalt mixtures incorporating styrene–butadiene–styrene (SBS) polymer and basalt fiber under freeze–thaw (F-T) cycles by using the static creep test. Asphalt mixture samples incorporating styrene–butadiene–styrene (SBS) polymer and basalt fiber were manufactured following the Superpave gyratory compaction (SGC) method and coring as well as sawing. After 0 to 21 F-T cycles processing, a uniaxial compression static creep test for the asphalt mixture specimens was performed to evaluate the influence of F-T cycles. The results indicated that the F-T cycles caused a larger creep deformation in the asphalt mixtures, which led to a decrease in the rut resistance of the asphalt mixtures incorporating SBS polymer and basalt fiber. Besides, the resistance to deformation decreased significantly in the early stage of F-T cycles. On the other hand, the viscoelastic parameters were analyzed to discuss the variation of viscoelastic characteristics. The relaxation time increased with F-T cycles, which will not be conducive to internal stress dissipation. Compared with lignin fiber, basalt fiber can improve the resistance to high-temperature deformation and the low-temperature crack resistance of asphalt mixtures under F-T cycles.

scholarly journals Laboratory Evaluation on the Performance Degradation of Styrene-Butadiene-Styrene-Modified Asphalt Mixture Reinforced with Basalt Fiber under Freeze–Thaw Cycles

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1092 ◽  
Author(s):  
Yongchun Cheng ◽  
He Li ◽  
Wensheng Wang ◽  
Liding Li ◽  
Haitao Wang
Keyword(s):  
Damage Evolution ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Laboratory Evaluation ◽  
Modified Asphalt ◽  
Freeze Thaw ◽  
Damage Theory ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

This paper aims at the freeze–thaw (F-T) cycles resistance of styrene-butadiene-styrene (SBS) modified asphalt mixture reinforced with basalt fiber in order to explore the performance evaluation and prediction of asphalt mixtures at seasonal frozen regions. Asphalt was firstly modified by the common SBS and then SBS-modified stone mastic asphalt (SMA) specimens with basalt fiber were prepared by using Superpave gyratory compaction (SGC) method. Next, asphalt mixture specimens processed by 0–21 F-T cycles were adopted for the high-temperature compression test, low-temperature splitting test and indirect tensile stiffness modulus test. Meanwhile, a three-dimensional model of F-T damage evolution of the mixtures was also established based on the reliability and damage theory. The test results showed that the loss rates of mechanical strength increased rapidly, and then gradually flattened; however, these indications changed significantly after 15–18 F-T cycles. In addition, the exponential function could reflect the variation trend of the mechanical performances with F-T cycles to a certain degree. The damage evolution and prediction model based on the reliability and damage theory can be established to analyze the internal degradation law better.

The effects of base binder and styrene–butadiene–styrene structure on rutting resistance of polymer–nanocomposite asphalt mixture

2017 ◽  
Vol 50 (3) ◽  
pp. 256-275 ◽  
Author(s):  
Mahdi Delaviz Bayekolaei ◽  
Koorosh Naderi ◽  
Fereidoon Moghadas Nejad
Keyword(s):  
Asphalt Mixture ◽  
Polymer Nanocomposite ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Rutting Resistance ◽  
Modified Asphalt ◽  
Modified Binders ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

In recent years, the use of nano materials for improving various mechanical and performance-related properties of polymer-modified asphalt binders has been growing rapidly. However, few researches investigated the effects of base binder and styrene–butadiene–styrene (SBS) structure on rutting resistance of polymer-nanocomposite-modified asphalt mixtures. This study investigated the effect of polymer–nanocomposite modification, using two different penetration grade asphalt binders and two types of SBS, on rutting properties of asphalt mixtures. Rheological properties of modified binders, Marshall stability, resilient modulus, and rut depth in wheel-tracking tests were used to evaluate the rutting performance of the modified binders and mixtures. The results indicated that both base binder type and SBS structure had significant effect on rutting resistance of polymer-nanocomposite-modified asphalt mixtures.

Fracture Performance of Asphalt Mixture with Styrene Butadiene Styrene Based on the J-Integral

2013 ◽  
Vol 671-674 ◽  
pp. 1202-1207
Author(s):  
Ping Li ◽  
Jun Jun Pei ◽  
Yu Yao ◽  
Guo Wei Sun
Keyword(s):  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
J Integral ◽  
Elastic Plastic ◽  
Pavement Engineering ◽  
Different Temperatures ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

Crack of asphalt pavement is one of the major destruction in pavement engineering. The bending test of small beam at low-temperature is often applied to evaluate the resisting crack for asphalt mixture. In this paper, based on J-integral theory in elastic-plastic fracture mechanics, performance of resisting crack of asphalt mixtures is analyzed in cases of different temperatures and contents of Styrene Butadiene Styrene (SBS) by bending tests of small beam. It is shown that the optimal condition for anti-cracking of asphalt mixtures is SBS contents of 4.2%~5.0% at 10°C using flexural tensile strain and stiffness modulus and the highest flexural tensile strengths of mixture occur at 0°C. Ductile fracture toughness of mixture with SBS modifier may be more sensitive to temperature from -10°C to 0°C and may be more useful to analysis elastic-plastic formation energy and energy releasing rate of asphalt mixture.

scholarly journals Establishment of Complex Modulus Master Curves Based on Generalized Sigmoidal Model for Freeze–Thaw Resistance Evaluation of Basalt Fiber-Modified Asphalt Mixtures

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1698
Author(s):  
Guojin Tan ◽  
Wensheng Wang ◽  
Yongchun Cheng ◽  
Yong Wang ◽  
Zhiqing Zhu
Keyword(s):  
Complex Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Low Frequency ◽  
Master Curves ◽  
Sigmoidal Model ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

This study aims to study the freeze–thaw (F–T) resistance of asphalt mixture incorporating styrene–butadiene–styrene (SBS) polymer and basalt fiber by using the established complex master curves of the generalized Sigmoidal model. Asphalt mixture samples incorporating styrene–butadiene–styrene (SBS) polymer and basalt fiber were manufactured following the Superpave gyratory compaction (SGC) method and coring as well as sawing. After 0–21 F–T cycles processing, a complex modulus test asphalt mixture specimen was performed to evaluate the influence of the F–T cycle. Besides, according to the time–temperature superposition principle, the master curves of a complex modulus were constructed to reflect the dynamic mechanical response in an extended range of reduced frequency at an arbitrary temperature. The results indicated that the elastic and viscous portions of asphalt mixture incorporating SBS and basalt fiber have decreased overall. It could be observed from the dynamic modulus ratio that the dynamic modulus ratios of specimens were more affected by the F–T cycle at low frequency or high temperature. Thus, in the process of asphalt pavement design and maintenance, attention should be paid to seasonal frozen asphalt pavement under low frequency and high temperature.

Experiment Study of Water Stability of Fiber-Reinforced Asphalt Mixture

2011 ◽  
Vol 243-249 ◽  
pp. 710-716 ◽  
Author(s):  
Ying Chun Cai ◽  
Yuan Xun Zheng
Keyword(s):  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Water Stability ◽  
Fiber Reinforced ◽  
Freeze Thaw ◽  
Optimum Dosage ◽  
Splitting Strength ◽  
Splitting Test ◽  
Marshall Test

To study the influence of fiber on the water stability of asphalt mixtures, the optimum dosage of asphalt and fibers are studied by the method of Marshall test and rut test. The results demonstrate that the optimum dosage of asphalt and fibers are 4.63% and 0.30%, respectively. Then the improved effects of basalt fiber on water stability of asphalt mixtures are evaluated through immersed Marshall test and freeze-thaw splitting test according to related specifications. The results show that the freeze-thaw splitting strength and splitting strength without freeze-thaw of fiber-reinforced asphalt mixture are improved to some extent compared with control mixture. Splitting strength without freeze-thaw of basalt, polyester and xylogen fiber-reinforced asphalt mixture is increased by 36.4%, 15.4% and 6.2%, and freeze-thaw splitting strength is increased by 55.2%, 28.7% and 14.5%. It can be concluded that fiber can remarkably improved the water stability of asphalt mixtures, besides; the improvement effects of basalt fiber are superior to polyester fiber and xylogen fiber.

scholarly journals Further Investigation on Damage Model of Eco-Friendly Basalt Fiber Modified Asphalt Mixture under Freeze-Thaw Cycles

2018 ◽  
Vol 9 (1) ◽  
pp. 60 ◽  
Author(s):  
Wensheng Wang ◽  
Yongchun Cheng ◽  
Guirong Ma ◽  
Guojin Tan ◽  
Xun Sun ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Splitting Tensile Strength ◽  
Stiffness Modulus ◽  
Freeze Thaw ◽  
Damage Characteristics ◽  
Indirect Tensile

The main distresses of asphalt pavements in seasonally frozen regions are due to the effects of water action, freeze-thaw cycles, and so on. Basalt fiber, as an eco-friendly mineral fiber with high mechanical performance, has been adopted to reinforce asphalt mixture in order to improve its mechanical properties. This study investigated the freeze-thaw damage characteristics of asphalt mixtures reinforced with eco-friendly basalt fiber by volume and mechanical properties—air voids, splitting tensile strength, and indirect tensile stiffness modulus tests. Test results indicated that asphalt mixtures reinforced with eco-friendly basalt fiber had better mechanical properties (i.e., splitting tensile strength and indirect tensile stiffness modulus) before and after freeze-thaw cycles. Furthermore, this study developed logistic damage models of asphalt mixtures in terms of the damage characteristics, and found that adding basalt fiber could significantly reduce the damage degree by about 25%, and slow down the damage grow rate by about 45% compared with control group without basalt fiber. Moreover, multi-variable grey models (GM) (1,N) were established for modelling the damage characteristics of asphalt mixtures under the effect of freeze-thaw cycles. GM (1,3) was proven as an effective prediction model to perform better in prediction accuracy compared to GM (1,2).

Sign in / Sign up

Export Citation Format

Share Document