scholarly journals Enhancement of Curcumin Anti-Inflammatory Effect via Formulation into Myrrh Oil-Based Nanoemulgel

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 577 ◽  
Author(s):  
Wafaa E. Soliman ◽  
Tamer M. Shehata ◽  
Maged E. Mohamed ◽  
Nancy S. Younis ◽  
Heba S. Elsewedy
Keyword(s):  
Ex Vivo ◽  
Skin Permeation ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Delivery Methods ◽  
Anti Cancer ◽  
Permeation Studies ◽  
Anti Inflammatory

Background: Curcumin (Cur) possesses a variety of beneficial pharmacological properties including antioxidant, antimicrobial, anti-cancer and anti-inflammatory activities. Nevertheless, the low aqueous solubility and subsequent poor bioavailability greatly limits its effectiveness. Besides, the role of myrrh oil as an essential oil in treating inflammatory disorders has been recently demonstrated. The objective of the current investigation is to enhance Cur efficacy via developing Cur nanoemulgel, which helps to improve its solubility and permeability, for transdermal delivery. Methods: The formulated preparations (Cur gel, emulgel and nanoemulgel) were evaluated for their physical appearance, spreadability, viscosity, particle size, in vitro release and ex vivo drug permeation studies. The in vivo anti-inflammatory activity was estimated using the carrageenan-induced rat hind paw edema method. Results: The formulated Cur-loaded preparations exhibited good physical characteristics that were in the acceptable range of transdermal preparations. The release of Cur from gel, emulgel and nanoemulgel after 12 h was 72.17 ± 3.76, 51.93 ± 3.81 and 62.0 ± 3.9%, respectively. Skin permeation of Cur was significantly (p < 0.05) improved when formulated into nanoemulgel since it showed the best steady state transdermal flux (SSTF) value (108.6 ± 3.8 µg/cm2·h) with the highest enhancement ratio (ER) (7.1 ± 0.2). In vivo anti-inflammatory studies proved that Cur-loaded nanoemulgel displayed the lowest percent of swelling (26.6% after 12 h). Conclusions: The obtained data confirmed the potential of the nanoemulgel dosage form and established the synergism of myrrh oil and Cur as an advanced anti-inflammatory drug.

scholarly journals Formulation and evaluation of buccoadhesive quetiapine fumarate tablets

2012 ◽  
Vol 48 (2) ◽  
pp. 335-345 ◽  
Author(s):  
Appa Rao Potu ◽  
Naresh Pujari ◽  
Shashidher Burra ◽  
Prabhakar Reddy Veerareddy
Keyword(s):  
Ex Vivo ◽  
In Vitro Release ◽  
Sodium Deoxycholate ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Quetiapine Fumarate ◽  
Zero Order Kinetics ◽  
Permeation Studies

The aim of present study was to develop and evaluate buccoadhesive Quetiapine Fumarate (QF) tablets, which is extensively metabolised by liver. Buccoadhesive tablets of QF were prepared using HPMC K4M, HPMC K15M and combination of carbopol and HPC as mucoadhesive polymers by direct compression method. Sodium deoxycholate was added to formulation to improve the permeation of drug. The formulations were tested for bioadhesion strength, ex vivo residence time, swelling time and in vitro dissolution studies and ex vivo permeation studies. Optimized formulation (F3) showed 92% in vitro release in 8 h and 67% permeation of drug through porcine buccal mucosa and followed fickian release mechanism with zero order kinetics. FTIR studies of optimized formulation showed no evidence of interaction between the drug and polymers. In vivo mucoadhesive behaviour of optimized formulation was performed and subjective parameters were evaluated.

scholarly journals LORNOXICAM-LOADED NANOSPONGES FOR CONTROLLED ANTI-INFLAMMATORY EFFECT: IN VITRO/IN VIVO ASSESSMENT

2020 ◽  
pp. 217-223
Author(s):  
SEHAM M. SHAWKY ◽  
MAHA K. A. KHALIFA ◽  
HEBA A. EASSA
Keyword(s):  
Skin Permeation ◽  
Skin Irritation ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Topical Delivery ◽  
Inflammatory Activity ◽  
Carboxymethyl Cellulose Sodium ◽  
Anti Inflammatory

Objective: To design a controlled topical delivery system of lornoxicam (LX) in order to enhance skin permeation and treatment efficacy. Nanosponges were selected as a novel carrier for this purpose. Methods: Nanosponges were formulated via the emulsion solvent evaporation method using ethyl cellulose (polymer) and polyvinyl alcohol (surfactant). Nanosponge dispersions were characterized for colloidal properties, entrapment efficiency and in vitro release study. The nanosponge formulation (LS1) was then incorporated into carboxymethyl cellulose sodium hydrogels and evaluated for pH, viscosity and in vitro drug release. Skin irritation was evaluated, and anti-inflammatory activity was assessed via rat hind paw edema method. Results: Nanosponges were in the nano-sized range and attained a uniform round shape with a spongy structure. LS1exhibited the highest LX release after 6 h, so it was incorporated as hydrogel. Formulated hydrogels showed acceptable physicochemical parameters (pH, drug content and rheological properties). Skin irritation testing proved LX-loaded nanosponge hydrogel formulation (G1) to be non-irritant. In vivo study revealed an enhanced anti-inflammatory activity of G1 for 6 h (p<0.001). Conclusion: The developed nanosponge hydrogel is an efficient nanocarrier for improved and controlled topical delivery of LX.

scholarly journals NOVEL NANOPARTICLES FOR THE ORAL DELIVERY OF LOW MOLECULAR WEIGHT HEPARIN: IN VITRO AND IN VIVO ASSESSMENT

2017 ◽  
Vol 10 (2) ◽  
pp. 254 ◽  
Author(s):  
Nallaguntla Lavanya ◽  
Indira Muzib ◽  
Aukunuru Jithan ◽  
Balekari Umamahesh
Keyword(s):  
Molecular Weight ◽  
Low Molecular Weight Heparin ◽  
Ex Vivo ◽  
In Vitro Release ◽  
Low Molecular Weight ◽  
Scanning Calorimetry ◽  
Ex Vivo Permeation ◽  
Permeation Studies

Objective: The objective of the present study was to prepare and evaluate a novel oral formulation of nanoparticles for the systemic delivery of low molecular weight heparin (LMWH). Methods: Nanoparticles were prepared by polyelectrolyte complexation (PEC) method using polymers sodium alginate and chitosan. Entrapment efficiency of LMWH in nanoparticles was found to be  ̴88%. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X‑ray diffraction (XRD), Scanning electron microscopy (SEM)  studies carried for nanoparticles. In vitro release studies were performed for the formulations. Ex vivo permeation studies were performed optimized formulation by using small intestine of rat and in vivo studies were conducted on rat model.Results: In vitro release studies demonstrated that the release of LMWH was negligible in the stomach and high in the small intestine. FTIR has indicated that there is no interaction between the ingredients in nanoparticle. DSC and XRD studies confirmed that the amino groups of chitosan interacted with the carboxylic groups of alginate. Invitro % drug release of 95% was shown by formulation AC5. Ex vivo permeation studies have elucidated that ̴ 73% of LMWH was transported across the epithelium. Nanoparticles have shown enhanced oral bioavailability of LMWH as revealed by 4.5 fold increase in AUC of plasma drug concentration time curve.Conclusion: The results suggest that the nanoparticles prepared can result in targeted delivery of LMWH into systemic circulation via intestinal and colon routes. Novel nanoparticles thus prepared in this study can be considered as a promising delivery system.Keywords: Antifactor Xa activity, Chitosan, Differential scanning calorimetry, Sodium alginate, Low-molecular-weight heparin, Oral bioavailability.

scholarly journals Enhancement of the Anti-inflammatory Efficacy of Betamethasone Valerate via Niosomal Encapsulation

2021 ◽  
Vol 11 (6) ◽  
pp. 14640-14660
Keyword(s):  
Zeta Potential ◽  
Rheological Behavior ◽  
Ex Vivo ◽  
Histopathological Examination ◽  
Skin Permeation ◽  
In Vitro Release ◽  
Betamethasone Valerate ◽  
In Vivo Studies ◽  
Anti Inflammatory

Betamethasone valerate-loaded niosomes were formulated to improve drug anti-inflammatory efficacy and reduce its systemic side effects by providing prolonged and localized drug delivery into the skin. Niosomes were prepared by thin-film hydration using different molar ratios of surfactant, cholesterol, and charge inducers. Formulations were characterized for entrapment efficiency, morphology, size, and zeta potential. In-vitro release and stability studies were conducted on selected formulations. Two niosomal gels were evaluated for spreadability, pH, rheological behavior, ex-vivo skin permeation, and in-vivo anti-inflammatory efficacy. Formulations showed high encapsulation efficiency reaching 92.03±1.88%. Vesicles were spherical in shape, ranging from 123.1 to 782 nm, and had large negative values of zeta-potential. They showed a biphasic release pattern which was more sustained than free drug suspension. Niosomes demonstrated good physicochemical stability under refrigeration for up to 3 months. Niosomal gels exhibited good spreadability, suitable pH values, favorable rheological behavior, and higher skin permeation than the plain gel. In-vivo studies revealed that niosomal gels showed a better sustained anti-inflammatory effect than drug plain gel and the marketed product, which was confirmed by further histopathological examination of paw tissues. Niosomal gels are promising formulations for sustained local delivery of betamethasone valerate.

scholarly journals Serratiopeptidase Niosomal Gel with Potential in Topical Delivery

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Ujwala A. Shinde ◽  
Shivkumar S. Kanojiya
Keyword(s):  
Ex Vivo ◽  
Skin Permeation ◽  
Entrapment Efficiency ◽  
Molar Ratio ◽  
Fourfold Increase ◽  
Surfactant Vesicles ◽  
Anti Inflammatory ◽  
Niosomal Gel

The objective of present study was to develop nonionic surfactant vesicles of proteolytic enzyme serratiopeptidase (SRP) by adapting reverse phase evaporation (REV) technique and to evaluate the viability of SRP niosomal gel in treating the topical inflammation. The feasibility of SRP niosomes by REV method using Span 40 and cholesterol has been successfully demonstrated in this investigation. The entrapment efficiency was found to be influenced by the molar ratio of Span 40 : cholesterol and concentration of SRP in noisome. The developed niosomes were characterized for morphology, particle size, and in vitro release. Niosomal gel was prepared by dispersing xanthan gum into optimized batch of SRP niosomes. Ex vivo permeation and in vivo anti-inflammatory efficacy of gel formulation were evaluated topically. SRP niosomes obtained were round in nanosize range. At Span 40 : cholesterol molar ratio 1 : 1 entrapment efficiency was maximum, that is, 54.82% ± 2.08, and showed consistent release pattern. Furthermore ex vivo skin permeation revealed that there was fourfold increase in a steady state flux when SRP was formulated in niosomes and a significant increase in the permeation of SRP, from SRP niosomal gel containing permeation enhancer. In vivo efficacy studies indicated that SRP niosomal gel had a comparable topical anti-inflammatory activity to that of dicolfenac gel.

scholarly journals Topical Amphotericin B Semisolid Dosage Form for Cutaneous Leishmaniasis: Physicochemical Characterization, Ex Vivo Skin Permeation and Biological Activity

Pharmaceutics ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 149 ◽  
Author(s):  
Diana Berenguer ◽  
Maria Magdalena Alcover ◽  
Marcella Sessa ◽  
Lyda Halbaut ◽  
Carme Guillén ◽  
...  
Keyword(s):  
Cutaneous Leishmaniasis ◽  
Amphotericin B ◽  
Cell Lines ◽  
Ex Vivo ◽  
Skin Permeation ◽  
Physicochemical Characterization ◽  
Keratinocyte Cell ◽  
Permeation Studies

Amphotericin B (AmB) is a potent antifungal successfully used intravenously to treat visceral leishmaniasis but depending on the Leishmania infecting species, it is not always recommended against cutaneous leishmaniasis (CL). To address the need for alternative topical treatments of CL, the aim of this study was to elaborate and characterize an AmB gel. The physicochemical properties, stability, rheology and in vivo tolerance were assayed. Release and permeation studies were performed on nylon membranes and human skin, respectively. Toxicity was evaluated in macrophage and keratinocyte cell lines, and the activity against promastigotes and intracellular amastigotes of Leishmania infantum was studied. The AmB gel remained stable for a period of two months, with optimal properties for topical use and no apparent toxic effect on the cell lines. High amounts of AmB were found in damaged and non-damaged skin (1230.10 ± 331.52 and 2484.57 ± 439.12 µg/g/cm2, respectively) and they were above the IC50 of AmB for amastigotes. Although there were no differences in the in vitro anti-leishmanial activity between the AmB solution and gel, the formulation resulted in a higher amount of AmB being retained in the skin, and is therefore a candidate for further studies of in vivo efficacy.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Formulation and Evaluation of Atorvastatin Calcium-Poly-ε-Caprolactone Nanoparticles Loaded Ocular Inserts for Sustained Release and Antiinflammatory Efficacy

2020 ◽  
Vol 21 (15) ◽  
pp. 1688-1698
Author(s):  
Germeen N.S. Girgis
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
In Vivo Study ◽  
Average Weight ◽  
Drug Release Profile ◽  
Atorvastatin Calcium ◽  
Anti Inflammatory

Purpose: The work was performed to investigate the feasibility of preparing ocular inserts loaded with Poly-ε-Caprolactone (PCL) nanoparticles as a sustained ocular delivery system. Methods: First, Atorvastatin Calcium-Poly-ε-Caprolactone (ATC-PCL) nanoparticles were prepared and characterized. Then, the optimized nanoparticles were loaded within inserts formulated with Methylcellulose (MC) and Polyvinyl Alcohol (PVA) by a solvent casting technique and evaluated physically, for in-vitro drug release profile. Finally, an in-vivo study was performed on the selected formulation to prove non-irritability and sustained ocular anti-inflammatory efficacy compared with free drug-loaded ocuserts. Results: The results revealed (ATC-PCL) nanoparticles prepared with 0.5% pluronic F127 were optimized with 181.72±3.6 nm particle size, 0.12±0.02 (PDI) analysis, -27.4± 0.69 mV zeta potential and 62.41%±4.7% entrapment efficiency. Nanoparticles loaded ocuserts manifested compatibility between drug and formulation polymers. Moreover, formulations complied with average weight 0.055±0.002 to 0.143±0.023 mg, and accepted pH. ATC-PCL nanoparticles loaded inserts prepared by 5% MC showed more sustained, prolonged in-vitro release over 24h. In-vivo study emphasized non-irritability, ocular anti-inflammatory effectiveness represented by smaller lid closure scores, and statistically significant lowering in PMN count after 3h. Conclusion: These findings proposed a possibly simple, new and affordable price technique to prepare promising (ATC-PCL) nanoparticles loaded inserts to achieve sustained release with prolonged antiinflammatory efficacy.

Development, Pre-clinical Investigation and Histopathological Evaluation of Metronidazole Loaded Topical Formulation for Treatment of Skin Inflammatory disorders

2020 ◽  
Vol 10 ◽  
Author(s):  
Divya Thakur ◽  
Gurpreet Kaur ◽  
Sheetu Wadhwa ◽  
Ashana Puri
Keyword(s):  
Ex Vivo ◽  
Clinical Investigation ◽  
In Vivo Studies ◽  
Tween 20 ◽  
Inflammatory Disorders ◽  
Rat Paw Edema ◽  
Ex Vivo Permeation ◽  
Permeation Studies ◽  
Anti Inflammatory

Background: Metronidazole (MTZ) is an anti-oxidant and anti-inflammatory agent with beneficial therapeutic properties. The hydrophilic nature of molecule limits its penetration across the skin. Existing commercial formulations have limitations of inadequate drug concentration present at target site, which requires frequent administration and poor patient compliance. Objective: The aim of current study was to develop and evaluate water in oil microemulsion of Metronidazole with higher skin retention for treatment of inflammatory skin disorders. Methods: Pseudo ternary phase diagrams were used in order to select the appropriate ratio of surfactant and co-surfactant and identify the microemulsion area. The selected formulation consisted of Capmul MCM as oil, Tween 20 and Span 20 as surfactant and co-surfactant, respectively, and water. The formulation was characterized and evaluated for stability, Ex vivo permeation studies and in vivo anti-inflammatory effect (carrageenan induced rat paw edema, air pouch model), anti-psoriatic activity (mouse-tail test). Results: The particle size analyses revealed average diameter and polydispersity index of selected formulation to be 16 nm and 0.373, respectively. The results of ex vivo permeation studies showed statistically higher mean cumulative amount of MTZ retained in rat skin from microemulsion i.e. 21.90 ± 1.92 μg/cm2 which was 6.65 times higher as compared to Marketed gel (Metrogyl gel®) with 3.29 ± 0.11 μg/cm2 (p<0.05). The results of in vivo studies suggested the microemulsion based formulation of MTZ to be similar in efficacy to Metrogyl gel®. Conclusion: Research suggests efficacy of the developed MTZ loaded microemulsion in treatment of chronic skin inflammatory disorders.

scholarly journals Plumbagin-Loaded Glycerosome Gel as Topical Delivery System for Skin Cancer Therapy

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 923
Author(s):  
Shadab Md ◽  
Nabil A. Alhakamy ◽  
Hibah M. Aldawsari ◽  
Mohammad Husain ◽  
Nazia Khan ◽  
...  
Keyword(s):  
Skin Cancer ◽  
Zeta Potential ◽  
Skin Permeation ◽  
Entrapment Efficiency ◽  
Aqueous Solubility ◽  
Skin Layer ◽  
Vesicle Size ◽  
Cytotoxicity Activities

Plumbagin (PLM) is a phytochemical which has shown cytotoxicity against of cancer cells both in vitro and in vivo. However, the clinical application of PLM has been hindered due to poor aqueous solubility and low bioavailability. The aim of the present study was to develop, optimize and evaluate PLM-loaded glycerosome (GM) gel and compare with conventional liposome (CL) for therapeutic efficacy against skin cancer. The GM formulations were optimized by employing design expert software by 3-level 3-factor design. The prepared GMs were characterized in vitro for vesicle size, size distribution, zeta potential, vesicle deformability, drug release, skin permeation, retention, texture, antioxidant and cytotoxicity activities. The optimized formulation showed a vesicle size of 119.20 ± 15.67 nm with a polydispersity index (PDI) of 0.145 ± 0.02, the zeta potential of −27 ± 5.12 mV and entrapment efficiency of 76.42 ± 9.98%. The optimized PLM-loaded GM formulation was transformed into a pre-formed gel which was prepared using Carbopol 934 polymer. The drug diffusion fluxes of CL gel and GM-loaded gel were 23.31 ±6.0 and 79.43 ± 12.43 µg/ cm2/h, respectively. The result of texture analysis revealed the adequate hardness, cohesiveness, consistency, and viscosity of the developed GM-loaded gel compared to CL gel. The confocal images showed that glycerosomal gel has deeper skin layer penetration as compared to the control solution. GM-loaded gel treated rat skin showed significantly (p < 0.05) higher drug accumulation in the dermis, higher cytotoxicity and higher antioxidant activity as compared to CL gel and PLM suspension. Thus, findings revealed that novel GM-loaded gel could be potential carriers for therapeutic intervention in skin cancer.

Sign in / Sign up

Export Citation Format

Share Document