scholarly journals Numerical Research of Pump-as-Turbine Performance with Synergy Analysis

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1031
Author(s):  
Zheng Cao ◽  
Jianqiang Deng ◽  
Linkun Zhao ◽  
Lin Lu
Keyword(s):  
Flow Rate ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Leading Edge ◽  
Operating Conditions ◽  
Field Analysis ◽  
Sensitivity Index ◽  
Computational Fluid Dynamics Cfd ◽  
Numerical Research ◽  
Hydraulic Devices

The wide use of pumps and turbines has significant value in energy conservation and utilization. In this work, a three-dimensional Computational Fluid Dynamics (CFD) model and a one-dimensional theoretical model of a Pump as Turbine (PAT) were established. On this basis, the correlation between pressure and velocity was quantitatively investigated by a proposed sensitivity index (SPV). A synergy field analysis was then applied to evaluate the flow characteristics of a pump and PAT, providing a perspective from the mechanism of the energy transfer enhancement for hydraulic devices. Moreover, the hydraulic and synergy performances of PAT were studied under various operating conditions. The results show that the minimum SPV is obtained in the impeller. With increasing flow rate, the SPV of the PAT generally increases, and the synergy angle of the impeller surface increases as well. A strong disordered synergy field is observed in regions of the blade leading edge, trailing edge, and volute tongue. The variations in efficiency and head with flow rate showed similar trends, respectively, with the synergy angle of the outlet and the mid-plane. This study provides an analytical method for quantitative evaluation of flow synergy characteristics, and it supplies a basis for further design improvement of the pump and PAT.

Unsteady simulations of migration and deposition of fly-ash particles in the first-stage turbine of an aero-engine

2021 ◽  
pp. 1-21
Author(s):  
Z. Hao ◽  
X. Yang ◽  
Z. Feng
Keyword(s):  
Fly Ash ◽  
Film Cooling ◽  
Particle Deposition ◽  
Flow Characteristics ◽  
Leading Edge ◽  
Velocity Model ◽  
Operating Conditions ◽  
Inlet Temperature ◽  
Internal Cooling ◽  
Aero Engine

Abstract Particulate deposits in aero-engine turbines change the profile of blades, increase the blade surface roughness and block internal cooling channels and film cooling holes, which generally leads to the degradation of aerodynamic and cooling performance. To reveal particle deposition effects in the turbine, unsteady simulations were performed by investigating the migration patterns and deposition characteristics of the particle contaminant in a one-stage, high-pressure turbine of an aero-engine. Two typical operating conditions of the aero-engine, i.e. high-temperature take-off and economic cruise, were discussed, and the effects of particle size on the migration and deposition of fly-ash particles were demonstrated. A critical velocity model was applied to predict particle deposition. Comparisons between the stator and rotor were made by presenting the concentration and trajectory of the particles and the resulting deposition patterns on the aerofoil surfaces. Results show that the migration and deposition of the particles in the stator passage is dominated by the flow characteristics of fluid and the property of particles. In the subsequential rotor passage, in addition to these factors, particles are also affected by the stator–rotor interaction and the interference between rotors. With higher inlet temperature and larger diameter of the particle, the quantity of deposits increases and the deposition is distributed mainly on the Pressure Side (PS) and the Leading Edge (LE) of the aerofoil.

Base-Vented Hydrofoils of Finite Span Under a Free Surface: An Experimental Investigation

1984 ◽  
Vol 28 (02) ◽  
pp. 90-106
Author(s):  
Jacques Verron ◽  
Jean-Marie Michel
Keyword(s):  
Experimental Investigation ◽  
Free Surface ◽  
Flow Rate ◽  
Cavity Length ◽  
Three Dimensional ◽  
Leading Edge ◽  
Pulsation Frequency ◽  
Cavity Pressure ◽  
Air Flow Rate ◽  
Cavity Configuration

Experimental results are given concerning the behavior of the flow around three-dimensional base-vented hydrofoils with wetted upper side. The influence of planform is given particular consideration so that the sections of the foils are simple wedges with rounded noses. Results concern cavity configuration, the relation between the air flow rate and cavity pressure, leading-edge cavitation, cavity length, pulsation frequency, and force coefficients.

scholarly journals Development of Hybrid Airlift-Jet Pump with Its Performance Analysis

2018 ◽  
Vol 8 (9) ◽  
pp. 1413 ◽  
Author(s):  
Dan Yao ◽  
Kwongi Lee ◽  
Minho Ha ◽  
Cheolung Cheong ◽  
Inhiug Lee
Keyword(s):  
Boundary Conditions ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Stokes Equations ◽  
Flow Characteristics ◽  
Operating Conditions ◽  
Navier Stokes ◽  
Jet Pump ◽  
Two Phase

A new pump, called the hybrid airlift-jet pump, is developed by reinforcing the advantages and minimizing the demerits of airlift and jet pumps. First, a basic design of the hybrid airlift-jet pump is schematically presented. Subsequently, its performance characteristics are numerically investigated by varying the operating conditions of the airlift and jet parts in the hybrid pump. The compressible unsteady Reynolds-averaged Navier-Stokes equations, combined with the homogeneous mixture model for multiphase flow, are used as the governing equations for the two-phase flow in the hybrid pump. The pressure-based methods combined with the Pressure-Implicit with Splitting of Operators (PISO) algorithm are used as the computational fluid dynamics techniques. The validity of the present numerical methods is confirmed by comparing the predicted mass flow rate with the measured ones. In total, 18 simulation cases that are designed to represent the various operating conditions of the hybrid pump are investigated: eight of these cases belong to the operating conditions of only the jet part with different air and water inlet boundary conditions, and the remaining ten cases belong to the operating conditions of both the airlift and jet parts with different air and water inlet boundary conditions. The mass flow rate and the efficiency are compared for each case. For further investigation into the detailed flow characteristics, the pressure and velocity distributions of the mixture in a primary pipe are compared. Furthermore, a periodic fluctuation of the water flow in the mass flow rate is found and analyzed. Our results show that the performance of the jet or airlift pump can be enhanced by combining the operating principles of two pumps into the hybrid airlift-jet pump, newly proposed in the present study.

scholarly journals Efficient Escherichia coli (E. coli) Trapping and Retrieval from Bodily Fluids via a Three-Dimensional (3D) Microbeads Stacked Nano-Device

2019 ◽  
Author(s):  
Xinye Chen ◽  
Abbi miller ◽  
Shengting Cao ◽  
Yu Gan ◽  
Jie Zhang ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Flow Rate ◽  
Magnetic Beads ◽  
Three Dimensional ◽  
E Coli ◽  
Bodily Fluids ◽  
3D Space ◽  
Fluidic Device ◽  
Computational Fluid Dynamics Cfd ◽  
On Chip

<div>A micro- and nano-fluidic device stacked with magnetic beads is developed to efficiently trap, concentrate, and retrieve Escherichia coli (E. coli) from bacteria suspension</div><div>and pig plasma. The small voids between the magnetic beads are used to physically isolate the bacteria in the device. We use computational fluid dynamics (CFD), 3D</div><div>tomography technology, and machine learning to probe and explain the bead stacking in a small 3D space with various flow rates. A combination of beads with different sizes is utilized to achieve a high capture efficiency of ~86% with a flow rate of 50 μL/min. Leveraging the high deformability of this device, the E. coli sample is retrieved from the designated bacteria suspension by applying a higher flow rate, followed by rapid magnetic separation. This unique function is also utilized to concentrate E. coli from the original bacteria suspension. An on-chip concentration</div><div>factor of ~11× is achieved by inputting 1,300 μL of the E. coli sample and then concentrating it in 100 μL buffer.</div><div>Importantly, this multiplexed, miniaturized, inexpensive, and transparent device is easy to fabricate and operate, making it ideal for pathogen separation in both laboratory and pointof- care (POC) settings.</div>

scholarly journals Efficient Escherichia coli (E. coli) Trapping and Retrieval from Bodily Fluids via a Three-Dimensional (3D) Microbeads Stacked Nano-Device

2019 ◽  
Author(s):  
Xinye Chen ◽  
Abbi miller ◽  
Shengting Cao ◽  
Yu Gan ◽  
Jie Zhang ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Flow Rate ◽  
Magnetic Beads ◽  
Three Dimensional ◽  
E Coli ◽  
Bodily Fluids ◽  
3D Space ◽  
Fluidic Device ◽  
Computational Fluid Dynamics Cfd ◽  
On Chip

<div>A micro- and nano-fluidic device stacked with magnetic beads is developed to efficiently trap, concentrate, and retrieve Escherichia coli (E. coli) from bacteria suspension</div><div>and pig plasma. The small voids between the magnetic beads are used to physically isolate the bacteria in the device. We use computational fluid dynamics (CFD), 3D</div><div>tomography technology, and machine learning to probe and explain the bead stacking in a small 3D space with various flow rates. A combination of beads with different sizes is utilized to achieve a high capture efficiency of ~86% with a flow rate of 50 μL/min. Leveraging the high deformability of this device, the E. coli sample is retrieved from the designated bacteria suspension by applying a higher flow rate, followed by rapid magnetic separation. This unique function is also utilized to concentrate E. coli from the original bacteria suspension. An on-chip concentration</div><div>factor of ~11× is achieved by inputting 1,300 μL of the E. coli sample and then concentrating it in 100 μL buffer.</div><div>Importantly, this multiplexed, miniaturized, inexpensive, and transparent device is easy to fabricate and operate, making it ideal for pathogen separation in both laboratory and pointof- care (POC) settings.</div>

scholarly journals Investigating the In-Flow Characteristics of Multi-Operation Conditions of Cross-Flow Fan in Air Conditioning Systems

Processes ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 959
Author(s):  
Weijie Zhang ◽  
Jianping Yuan ◽  
Qiaorui Si ◽  
Yanxia Fu
Keyword(s):  
Pressure Distribution ◽  
Flow Rate ◽  
Total Pressure ◽  
Air Conditioning ◽  
Pressure Pulsation ◽  
Flow Characteristics ◽  
Cross Flow ◽  
Operating Conditions ◽  
Aerodynamic Noise ◽  
Cross Flow Fan

Cross-flow fans are widely used in numerous applications such as low-pressure ventilation, household appliances, laser instruments, and air-conditioning equipment. Cross-flow fans have superior characteristics, including simple structure, small size, stable airflow, high dynamic pressure coefficient, and low noise. In the present study, numerical simulation and experimental research were carried out to study the unique secondary flow and eccentric vortex flow characteristics of the internal flow field in multi-operating conditions. To this end the vorticity and the circumferential pressure distribution in the air duct are obtained based on the performed experiments and the correlation between spectral characteristics of multiple operating conditions and the inflow state is established. The obtained results show that when the area of the airflow passage decreases while the area of the eccentric vortex area gradually increases, then the airflow of the cross-flow fan decreases, the outlet expands, and the flow pattern uniformity reduces. It was found that wakes form in the vicinity of the blade and the tail of the volute tongue, which generate pressure pulsation, and aerodynamic noise. The pressure distribution along the inner circumference shows that the total minimum pressure appears in the eccentric vortex near the volute tongue and the volute returns near the zone. Moreover, it was found that the total pressure near the eccentric vortex is significantly smaller than that of the main flow zone. As the flow rate decreases, the pressure pulsation amplitude of the eccentric vortex region significantly increases, while the static and total pressure pulsation amplitudes are gradually increased. Close to the eccentric vortex on the inner side of the blade in the volute tongue area, total pressure is low, total pressure on the outside of the blade is not affected, and pressure difference between the inner and outer sides is large. When the flow rate of the cross-flow fan is 0.4 Qd, there is no obvious peak at the harmonic frequency of the blade passage frequency. This shows that the aerodynamic noise is caused by the main unstable flow.

Fixing a Boiler with CFD

1998 ◽  
Vol 120 (04) ◽  
pp. 59-61
Author(s):  
Kevin Parker
Keyword(s):  
Three Dimensional ◽  
Paper Mill ◽  
Operating Conditions ◽  
Clear Understanding ◽  
Post Processing ◽  
Processing Program ◽  
Hidden Line ◽  
Computational Fluid Dynamics Cfd ◽  
Animated Sequence ◽  
Light Shading

This article focuses on carryover at a paper mill that had been solved using computational fluid dynamics (CFD) to visualize flow within the boiler. Technicians had tried adjusting airflow and firing arrangements without success. They turned the problem over to analysts who simulated the airflow within the boiler using CFD. An animated sequence of streamlines showing airflow provided engineers with a clear understanding of exactly what was happening inside the boiler, making it relatively easy to adjust operating conditions and solve the problem. McDermott analysts use FIELDVIEW, a commercial post-processing program from Intelligent Light in Lyndhurst, NJ. With the software, the analyst can create three-dimensional perspective views with hidden-line removal and light shading. She or He can trace the path of a marker traveling along with the fluid through a series of animated views. The analysts made a second FIELDVIEW movie of the airflow conditions with the new arrangement, showing the elimination of the center core. They played the two movies simultaneously on two monitors set side-by-side to demonstrate for the customer’s engineers how the recommended changes would solve the problem.

PIV Measurements in Diffuser of the Radial Pump

2015 ◽  
Author(s):  
Sung Yong Jung ◽  
Young Uk Min ◽  
Kyung Lok Lee
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Operating Conditions ◽  
Internal Flows ◽  
Piv Measurements ◽  
Image Velocimetry ◽  
Acquisition Device ◽  
Field Information ◽  
Radial Pump

The performance characteristics of the radial pump commonly used as a multistage (8 or 10 stage) pump have been investigated experimentally. Due to the complex three-dimensional geometries, the hydraulic performance of multistage pumps is closely related to the internal flows in diffuser and return vanes. In order to investigate the flow characteristics in these regions by Particle Image Velocimetry (PIV) technique, a transparent pump is designed. A 532 nm continuous laser and a high-speed camera are used as a light source and an image acquisition device, respectively. The velocity field information in a diffuser of the radial pump is successfully obtained by two-dimensional PIV measurements at various operating conditions.

Inter-Blade Vortex Characteristics With the Blockage Effects of Runner Blade in a Francis Hydro Turbine Model

2019 ◽  
Author(s):  
Seung-Jun Kim ◽  
Jin-Hyuk Kim ◽  
Young-Seok Choi ◽  
Yong Cho ◽  
Jong-Woong Choi
Keyword(s):  
Flow Rate ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Operating Conditions ◽  
Low Flow ◽  
Hydro Turbine ◽  
Runner Blade ◽  
Performance Reduction ◽  
Turbine Model ◽  
Low Flow Rate

Abstract This study presents the numerical analysis on the inter-blade vortex characteristics along with the blockage effects of runner blade in a Francis hydro turbine model with various flow rate conditions. The turbine model showed different flow characteristics in the runner blade passages according to operating conditions, and inter-blade vortex was observed at lower flow rate conditions. This inter-blade vortex can lead to performance reduction, vibration, and instability for smooth operation of turbine systems. The previous study on blockage effects on various runner blade thickness, showed its influence on hydraulic performance and internal flow characteristics at low flow rate conditions. Therefore, the inter-blade vortex characteristics can be altered with the blockage effects at low flow rate conditions in a Francis hydro-turbine. For investigating the internal flow and unsteady pressure characteristics, three-dimensional steady and unsteady Reynolds-averaged Navier-Stokes calculations are performed. These inter-blade vortices were captured at the leading and trailing edges close to the runner hub. These vortex regions showed flow separation and stagnation flow while blockage effects contributed for decreasing the inter-blade vortex at low flow rate conditions.

Dynamic mode decomposition analysis of the flow characteristics in a centrifugal compressor with vaned diffuser

2020 ◽  
pp. 095765092091346
Author(s):  
Xiaojian Li ◽  
Yijia Zhao ◽  
Zhengxian Liu ◽  
Ming Zhao
Keyword(s):  
Flow Rate ◽  
Centrifugal Compressor ◽  
Flow Characteristics ◽  
Leading Edge ◽  
Dynamic Mode Decomposition ◽  
Flow Structures ◽  
Dynamic Mode ◽  
Tip Leakage ◽  
Mode Decomposition ◽  
Dynamic Structures

To understand the flow dynamic characteristics of a centrifugal compressor, the dynamic mode decomposition (DMD) method is introduced to decompose the complex three-dimensional flow field. Three operating conditions, peak efficiency (OP1), peak pressure ratio (OP2), and small mass flow rate (near stall, OP3) conditions, are analyzed. First, the physical interpretations of main dynamic modes at OP1 are identified. As a result, the dynamic structures captured by DMD method are closely associated with the flow characteristics. In detail, the BPF/2BPF (blade passing frequency) corresponds to the impeller–diffuser interaction, the rotor frequency (RF) represents the tip leakage flow (TLF) from leading edge, and the 4RF is related to the interaction among the downstream TLF, the secondary flow, and the wake vortex. Then, the evolution of the dynamic structures is discussed when the compressor mass flow rate consistently declines. In the impeller, the tip leakage vortex near leading edge gradually breaks down due to the high backpressure, resulting in multi-frequency vortices. The broken vortices further propagate downstream along streamwise direction and then interact with the flow structures of 4RF. As a result, the 8RF mode can be observed in the whole impeller, this mode is transformed from upstream RF and 4RF modes, respectively. On the other hand, the broken vortices show broadband peak spectrum, which is correlated to the stall inception. Therefore, the sudden boost of energy ratio of 14RF mode could be regarded as a type of earlier signal for compressor instability. In the diffuser, the flow structures are affected by the perturbation from the impeller. However, the flow in diffuser is more stable than that in impeller at OP1–OP3, since the leading modes are stable patterns of BPF/2BPF.

Sign in / Sign up

Export Citation Format

Share Document