scholarly journals A Novel Modular System for Breath Analysis Using Temperature Modulated MOX Sensors

Proceedings ◽  
2019 ◽  
Vol 14 (1) ◽  
pp. 49 ◽  
Author(s):  
Carsten Jaeschke ◽  
Oriol Gonzalez ◽  
Marta Padilla ◽  
Kaylen Richardson ◽  
Johannes Glöckler ◽  
...  

In this work, a new generation of gas sensing systems specially designed for breath analysis is presented. The developed system comprises a compact modular, low volume, temperature-controlled sensing chamber with three compartments that can host different sensor types. In the presented system, one compartment contains an array of 8 analog MOX sensors and the other two 10 digital MOX sensors each. Here, we test the system for the detection of low concentrations of several compounds.

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 993 ◽  
Author(s):  
Carsten Jaeschke ◽  
Oriol Gonzalez ◽  
Johannes J. Glöckler ◽  
Leila T. Hagemann ◽  
Kaylen E. Richardson ◽  
...  

In this work, a new generation of eNose systems particularly suited for exhaled breath gas analysis is presented. The developed analyzer system comprises a compact modular, low volume, temperature controlled sensing chamber explicitly tested for the detection of acetone, isoprene, pentane and isopropanol. The eNose system sensing chamber consists of three compartments, each of which can contain 8 analog Metal Oxide (MOX) sensors or 10 digital MOX sensors. Additional sensors within the digital compartment allow for pressure, humidity and temperature measurements. The presented eNose system contains a sensor array with up to 30 physical sensors and provides the ability to discriminate between low VOC concentrations under dry and humid conditions. The MOX sensor signals were analyzed by pattern recognition methods.


HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 557d-557
Author(s):  
Jennifer Warr ◽  
Fenny Dane ◽  
Bob Ebel

C6 volatile compounds are known to be produced by the plant upon pathogen attack or other stress-related events. The biological activity of many of these substances is poorly understood, but some might produce signal molecules important in host–pathogen interactions. In this research we explored the possibility that lipid-derived C6 volatiles have a direct effect on bacterial plant pathogens. To this purpose we used a unique tool, a bacterium genetically engineered to bioluminesce. Light-producing genes from a fish-associated bacterium were introduced into Xanthomonas campestris pv. campestris, enabling nondestructive detection of bacteria in vitro and in the plant with special computer-assisted camera equipment. The effects of different C6 volatiles (trans-2 hexanal, trans-2 hexen-1-ol and cis-3 hexenol) on growth of bioluminescent Xanthomonas campestris were investigated. Different volatile concentrations were used. Treatment with trans-2 hexanal appeared bactericidal at low concentrations (1% and 10%), while treatments with the other volatiles were not inhibitive to bacterial growth. The implications of these results with respect to practical use of trans-2 hexanal in pathogen susceptible and resistant plants will be discussed.


1988 ◽  
Vol 51 (7) ◽  
pp. 525-530 ◽  
Author(s):  
MOUSTAFA A. EL-SHENAWY ◽  
ELMER H. MARTH

The ability of Listeria monocytogenes to grow or survive was determined using tryptose broth at pH 5.6 or 5.0, supplemented with 0, 0.05. 0.1, 0.15. 0.2. 0.25 or 0.3% sodium benzoate, and incubated at 4,13,21 or 35°C. The bacterium grew in benzoate-free controls under all conditions except at 4°C and pH 5.0. At pH 5.6 and 4°C, after 60 d, L. monocytogenes (initial population ca. 103/ml) was inactivated by 0.2, 0.25 and 0.3% sodium benzoate. Other concentrations of benzoate permitted slight growth during the first 36 d of incubation followed by a decrease in populations of the pathogen. At pH 5.0 and 4°C, from 0.15 to 0.3% benzoate completely inactivated the pathogen in 24 to 30 d, whereas the other concentrations caused a gradual decrease in the population during the 66-d incubation period. At 13°C and pH 5.6, L. monocytogenes grew (more at lower than higher concentrations of benzoate) in the presence of all concentrations of benzoate except 0.25 or 0.3%, which prohibited growth throughout a 264-h incubation period. Reducing the pH to 5.0 minimized growth at the two low concentrations of benzoate and caused slight decreases in population at the other concentrations of benzoate. At 21 and 35°C and pH 5.6, appreciable growth of L. monocytogenes occurred in the presence of 0.2% or less sodium benzoate, whereas higher concentrations were inhibitory, permitting little if any growth by the pathogen. Reducing the pH to 5.0 allowed limited growth of the pathogen at 21 and 35°C when the medium contained 0.05 or 0.1% sodium benzoate. Higher concentrations caused either complete inhibition or inhibition plus partial or complete inactivation of the pathogen during incubations of 117 h at 21°C or 78 h at 35°C.


Sensors ◽  
2022 ◽  
Vol 22 (2) ◽  
pp. 626
Author(s):  
Seokhun Kwon ◽  
Seokwon Lee ◽  
Joouk Kim ◽  
Chulmin Park ◽  
Hosung Jung ◽  
...  

Recently, as air pollution and particulate matter worsen, the importance of a platform that can monitor the air environment is emerging. Especially, among air pollutants, nitrogen dioxide (NO2) is a toxic gas that can not only generate secondary particulate matter, but can also derive numerous toxic gases. To detect such NO2 gas at low concentration, we fabricated a GNWs/NiO-WO3/GNWs heterostructure-based gas sensor using microwave plasma-enhanced chemical vapor deposition (MPECVD) and sputter, and we confirmed the NO2 detection characteristics between 10 and 50 ppm at room temperature. The morphology and carbon lattice characteristics of the sensing layer were investigated using field emission scanning electron microscopy (FESEM) and Raman spectroscopy. In the gas detection measurement, the resistance negative change according to the NO2 gas concentration was recorded. Moreover, it reacted even at low concentrations such as 5–7 ppm, and showed excellent recovery characteristics of more than 98%. Furthermore, it also showed a change in which the reactivity decreased with respect to humidity of 33% and 66%.


Author(s):  
Shohei Kubota ◽  
Yuji Aoki ◽  
Tomomi Sskai ◽  
Katsumasa Kitamura ◽  
Teruaki Matsui ◽  
...  

Background: Some patients with a wheat allergy have been reported to show clinical cross-reactivity to barley. However, it is not clear whether the development of barley allergy in patients with a wheat allergy is due to cross-antigenicity between wheat and barley. In our study, we aimed to determine the clinical cross-reactivity and immunological cross-antigenicity of wheat and barley. Methods: We compared the results of barley oral food challenges (OFCs) before oral immunotherapy (OIT) for wheat with those after OIT in nine patients with a wheat allergy to estimate the clinical cross-reactivity of wheat and barley. Moreover, we performed enzyme-linked immunosorbent assay (ELISA) inhibition and immunoblotting inhibition using serum from seven patients allergic to wheat and barley. Results: Nine patients who had positive barley-OFC results performed before OIT for wheat were all negative on barley-OFC performed after OIT. In ELISA inhibition, preincubation of serum from patients allergic to wheat and barley with a high barley extract concentration inhibited binding of IgE to wheat extract by less than 10%. On the other hand, wheat and barley extracts equally inhibited binding to barley sIgE at high concentrations. In the immunoblotting inhibition test, the spots of wheat were inhibited but weakly by barley extracts, and most of the spots of barley were inhibited even by low concentrations of the wheat and barley extract. Conclusion: We showed that barley allergy associated with wheat allergy is caused by cross-reactivity from wheat. The OIT for wheat was one of the promising options for barley allergy.


2003 ◽  
Vol 9 (1) ◽  
pp. 33-41 ◽  
Author(s):  
E. García ◽  
J. L. Chacón ◽  
J. Martínez ◽  
P. M. Izquierdo

Changes in volatile compounds in musts and skins of grapes of Airén, Macabeo and Chardonnay white varieties were determined during ripening. The musts of the Airén variety contained higher concentrations of c-3-hexenol; musts of the Macabeo variety were the richest in t-3-hexenol and 2,4-hexadienal, while the Chardonnay musts stood out for having higher concentrations of benzaldehyde, phenylacetaldehyde and benzyl alcohol. The skins of the three varieties were both qualitatively and quantitatively richer in volatiles than were the musts. The skins of the Airén grapes had the highest levels of nerol. Airén grapes were the only variety in which citronellol was present in the skins. Low concentrations of eugenol were detected in the skins of the Chardonnay grape variety but were not present in the other two varieties. Changes in the concentration of the volatile compounds during ripening were not uniform; this made difficult the determination of the optimum level of ripening for each variety on the basis of the volatile compound content. Nevertheless, results indicated that C6 compounds and terpene concentrations reached a maximum at 6-8 ° Baumé in the Airén grapes and at around 11 ° Baumé in the Chardonnay and Macabeo grapes.


Author(s):  
Saad Iqbal ◽  
Usman Iqbal ◽  
Syed Ali Hassan

Target localization and tracking has always been a hot topic in all eras of communication studies. Conventional system used radars for the purpose of locating and/or tracking an object using the classical methods of signal processing. Radars are generally classified as active and passive, where the former uses both transmitter and receivers simultaneously to perform the localization task. On the other hand, passive radars use existing illuminators of opportunity such as wi-fi or GSM signals to perform the aforementioned tasks. Although they perform detection using classical correlation methods and CFAR, recently machine learning has been used in various application of passive sensing to elevate the system performance. The latest developed models for intelligent RF passive sensing system for both outdoor and indoor scenarios are discussed in this chapter, which will give insight to the readers about their designing.


Sign in / Sign up

Export Citation Format

Share Document