scholarly journals Reconstruction of High-Temporal- and High-Spatial-Resolution Reflectance Datasets Using Difference Construction and Bayesian Unmixing

2020 ◽  
Vol 12 (23) ◽  
pp. 3952
Author(s):  
Lei Yang ◽  
Jinling Song ◽  
Lijuan Han ◽  
Xin Wang ◽  
Jing Wang
Keyword(s):  
Time Series ◽  
Spatial Resolution ◽  
Land Surface ◽  
High Spatial Resolution ◽  
Vegetation Indices ◽  
Vital Role ◽  
Dynamic Monitoring ◽  
Fusion Model ◽  
Spatiotemporal Resolution ◽  
Reconstruction Methods

High-temporal- and high-spatial-resolution reflectance datasets play a vital role in monitoring dynamic changes at the Earth’s land surface. So far, many sensors have been designed with a trade-off between swath width and pixel size; thus, it is difficult to obtain reflectance data with both high spatial resolution and frequent coverage from a single sensor. In this study, we propose a new Reflectance Bayesian Spatiotemporal Fusion Model (Ref-BSFM) using Landsat and MODIS (Moderate Resolution Imaging Spectroradiometer) surface reflectance, which is then used to construct reflectance datasets with high spatiotemporal resolution and a long time series. By comparing this model with other popular reconstruction methods (the Flexible Spatiotemporal Data Fusion Model, the Spatial and Temporal Adaptive Reflectance Fusion Model, and the Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model), we demonstrate that our approach has the following advantages: (1) higher prediction accuracy, (2) effective treatment of cloud coverage, (3) insensitivity to the time span of data acquisition, (4) capture of temporal change information, and (5) higher retention of spatial details and inconspicuous MODIS patches. Reflectance time-series datasets generated by Ref-BSFM can be used to calculate a variety of remote-sensing-based vegetation indices, providing an important data source for land surface dynamic monitoring.

scholarly journals Spatiotemporal Downscaling of GRACE Total Water Storage Using Land Surface Model Outputs

2021 ◽  
Vol 13 (5) ◽  
pp. 900
Author(s):  
Detang Zhong ◽  
Shusen Wang ◽  
Junhua Li
Keyword(s):  
Spatial Resolution ◽  
Land Surface ◽  
High Spatial Resolution ◽  
Water Storage ◽  
Land Surface Model ◽  
Surface Model ◽  
Total Water ◽  
Spatiotemporal Resolution ◽  
Spherical Cap ◽  
High Spatiotemporal Resolution

High spatiotemporal resolution of terrestrial total water storage plays a key role in assessing trends and availability of water resources. This study presents a two-step method for downscaling GRACE-derived total water storage anomaly (GRACE TWSA) from its original coarse spatiotemporal resolution (monthly, 3-degree spherical cap/~300 km) to a high resolution (daily, 5 km) through combining land surface model (LSM) simulated high spatiotemporal resolution terrestrial water storage anomaly (LSM TWSA). In the first step, an iterative adjustment method based on the self-calibration variance-component model (SCVCM) is used to spatially downscale the monthly GRACE TWSA to the high spatial resolution of the LSM TWSA. In the second step, the spatially downscaled monthly GRACE TWSA is further downscaled to the daily temporal resolution. By applying the method to downscale the coarse resolution GRACE TWSA from the Jet Propulsion Laboratory (JPL) mascon solution with the daily high spatial resolution (5 km) LSM TWSA from the Ecological Assimilation of Land and Climate Observations (EALCO) model, we evaluated the benefit and effectiveness of the proposed method. The results show that the proposed method is capable to downscale GRACE TWSA spatiotemporally with reduced uncertainty. The downscaled GRACE TWSA are also evaluated through in-situ groundwater monitoring well observations and the results show a certain level agreement between the estimated and observed trends.

scholarly journals An Effective High Spatiotemporal Resolution NDVI Fusion Model Based on Histogram Clustering

2020 ◽  
Vol 12 (22) ◽  
pp. 3774
Author(s):  
Xuegang Xing ◽  
Changzhen Yan ◽  
Yanyan Jia ◽  
Haowei Jia ◽  
Junfeng Lu ◽  
...  
Keyword(s):  
Time Series ◽  
Land Surface ◽  
Time Series Data ◽  
Series Data ◽  
Fusion Model ◽  
Spatiotemporal Resolution ◽  
Model Based ◽  
High Spatiotemporal Resolution ◽  
Ndvi Time Series ◽  
Shape Changes

The normalized difference vegetation index (NDVI) is a powerful tool for understanding past vegetation, monitoring the current state, and predicting its future. Due to technological and budget limitations, the existing global NDVI time-series data cannot simultaneously meet the needs of high spatial and temporal resolution. This study proposes a high spatiotemporal resolution NDVI fusion model based on histogram clustering (NDVI_FMHC), which uses a new spatiotemporal fusion framework to predict phenological and shape changes. Meanwhile, this model also uses four strategies to reduce error, including the construction of an overdetermined linear mixed model, multiscale prediction, residual distribution, and Gaussian filtering. Five groups of real MODIS_NDVI and Landsat_NDVI datasets were used to verify the predictive performance of the NDVI_FMHC. The results indicate that NDVI_FMHC has higher accuracy and robustness in forest areas (r = 0.9488 and ADD = 0.0229) and cultivated land areas (r = 0.9493 and ADD = 0.0605), while the prediction effect is relatively weak in areas subject to shape changes, such as flooded areas (r = 0.8450 and ADD = 0.0968), urban areas (r = 0.8855 and ADD = 0.0756), and fire areas (r = 0.8417 and ADD = 0.0749). Compared with ESTARFM, NDVI_LMGM, and FSDAF, NDVI_FMHC has the highest prediction accuracy, the best spatial detail retention, and the strongest ability to capture shape changes. Therefore, the NDVI_FMHC can obtain NDVI time-series data with high spatiotemporal resolution, which can be used to realize long-term land surface dynamic process research in a complex environment.

scholarly journals Modifying an Image Fusion Approach for High Spatiotemporal LST Retrieval in Surface Dryness and Evapotranspiration Estimations

2020 ◽  
Vol 12 (3) ◽  
pp. 498 ◽  
Author(s):  
Tri Wandi Januar ◽  
Tang-Huang Lin ◽  
Chih-Yuan Huang ◽  
Kuo-En Chang
Keyword(s):  
Spatial Resolution ◽  
Temporal Resolution ◽  
Air Temperature ◽  
Land Surface ◽  
Thermal Infrared ◽  
Satellite Observations ◽  
High Temporal Resolution ◽  
Landsat 8 ◽  
Fusion Model ◽  
Spatiotemporal Resolution

Thermal infrared (TIR) satellite images are generally employed to retrieve land surface temperature (LST) data in remote sensing. LST data have been widely used in evapotranspiration (ET) estimation based on satellite observations over broad regions, as well as the surface dryness associated with vegetation index. Landsat-8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) can provide LST data with a 30-m spatial resolution. However, rapid changes in environmental factors, such as temperature, humidity, wind speed, and soil moisture, will affect the dynamics of ET. Therefore, ET estimation needs a high temporal resolution as well as a high spatial resolution for daily, diurnal, or even hourly analysis. A challenge with satellite observations is that higher-spatial-resolution sensors have a lower temporal resolution, and vice versa. Previous studies solved this limitation by developing a spatial and temporal adaptive reflectance fusion model (STARFM) for visible images. In this study, with the primary mechanism (thermal emission) of TIRS, surface emissivity is used in the proposed spatial and temporal adaptive emissivity fusion model (STAEFM) as a modification of the original STARFM for fusing TIR images instead of reflectance. For high a temporal resolution, the advanced Himawari imager (AHI) onboard the Himawari-8 satellite is explored. Thus, Landsat-like TIR images with a 10-minute temporal resolution can be synthesized by fusing TIR images of Himawari-8 AHI and Landsat-8 TIRS. The performance of the STAEFM to retrieve LST was compared with the STARFM and enhanced STARFM (ESTARFM) based on the similarity to the observed Landsat image and differences with air temperature. The peak signal-to-noise ratio (PSNR) value of the STAEFM image is more than 42 dB, while the values for STARFM and ESTARFM images are around 31 and 38 dB, respectively. The differences of LST and air temperature data collected from five meteorological stations are 1.53 °C to 4.93 °C, which are smaller compared with STARFM’s and ESATRFM’s. The examination of the case study showed reasonable results of hourly LST, dryness index, and ET retrieval, indicating significant potential for the proposed STAEFM to provide very-high-spatiotemporal-resolution (30 m every 10 min) TIR images for surface dryness and ET monitoring.

Combination of GF-2 high spatial resolution imagery and land surface factors for predicting soil salinity of muddy coasts

CATENA ◽  
2021 ◽  
Vol 202 ◽  
pp. 105304
Author(s):  
Yufeng Li ◽  
Cheng Wang ◽  
Alan Wright ◽  
Hongyu Liu ◽  
Huabing Zhang ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Soil Salinity ◽  
Land Surface ◽  
High Spatial Resolution ◽  
High Spatial Resolution Imagery

scholarly journals A Random Forest-Based Data Fusion Method for Obtaining All-Weather Land Surface Temperature with High Spatial Resolution

2021 ◽  
Vol 13 (11) ◽  
pp. 2211
Author(s):  
Shuo Xu ◽  
Jie Cheng ◽  
Quan Zhang
Keyword(s):  
Random Forest ◽  
Surface Temperature ◽  
Spatial Resolution ◽  
Land Surface Temperature ◽  
Land Surface ◽  
High Spatial Resolution ◽  
Learning Algorithm ◽  
Mainland China ◽  
Fusion Method ◽  
Moisture Condition

Land surface temperature (LST) is an important parameter for mirroring the water–heat exchange and balance on the Earth’s surface. Passive microwave (PMW) LST can make up for the lack of thermal infrared (TIR) LST caused by cloud contamination, but its resolution is relatively low. In this study, we developed a TIR and PWM LST fusion method on based the random forest (RF) machine learning algorithm to obtain the all-weather LST with high spatial resolution. Since LST is closely related to land cover (LC) types, terrain, vegetation conditions, moisture condition, and solar radiation, these variables were selected as candidate auxiliary variables to establish the best model to obtain the fusion results of mainland China during 2010. In general, the fusion LST had higher spatial integrity than the MODIS LST and higher accuracy than downscaled AMSR-E LST. Additionally, the magnitude of LST data in the fusion results was consistent with the general spatiotemporal variations of LST. Compared with in situ observations, the RMSE of clear-sky fused LST and cloudy-sky fused LST were 2.12–4.50 K and 3.45–4.89 K, respectively. Combining the RF method and the DINEOF method, a complete all-weather LST with a spatial resolution of 0.01° can be obtained.

scholarly journals Assessing the relationship between environmental factors and malaria vector breeding sites in Swaziland using multi-scale remotely sensed data

2015 ◽  
Vol 10 (1) ◽  
Author(s):  
Sabelo Nick Dlamini ◽  
Jonas Franke ◽  
Penelope Vounatsou
Keyword(s):  
Environmental Factors ◽  
Spatial Resolution ◽  
Malaria Vector ◽  
Land Surface ◽  
High Spatial Resolution ◽  
Remotely Sensed ◽  
Remotely Sensed Data ◽  
Breeding Sites ◽  
Multi Scale ◽  
The Relationship

Many entomological studies have analyzed remotely sensed data to assess the relationship between malaria vector distribution and the associated environmental factors. However, the high cost of remotely sensed products with high spatial resolution has often resulted in analyses being conducted at coarse scales using open-source, archived remotely sensed data. In the present study, spatial prediction of potential breeding sites based on multi-scale remotely sensed information in conjunction with entomological data with special reference to presence or absence of larvae was realized. Selected water bodies were tested for mosquito larvae using the larva scooping method, and the results were compared with data on land cover, rainfall, land surface temperature (LST) and altitude presented with high spatial resolution. To assess which environmental factors best predict larval presence or absence, Decision Tree methodology and logistic regression techniques were applied. Both approaches showed that some environmental predictors can reliably distinguish between the two alternatives (existence and non-existence of larvae). For example, the results suggest that larvae are mainly present in very small water pools related to human activities, such as subsistence farming that were also found to be the major determinant for vector breeding. Rainfall, LST and altitude, on the other hand, were less useful as a basis for mapping the distribution of breeding sites. In conclusion, we found that models linking presence of larvae with high-resolution land use have good predictive ability of identifying potential breeding sites.

scholarly journals Fusing Geostationary Satellite Observations with Harmonized Landsat-8 and Sentinel-2 Time Series for Monitoring Field-Scale Land Surface Phenology

2021 ◽  
Vol 13 (21) ◽  
pp. 4465
Author(s):  
Yu Shen ◽  
Xiaoyang Zhang ◽  
Weile Wang ◽  
Ramakrishna Nemani ◽  
Yongchang Ye ◽  
...  
Keyword(s):  
Time Series ◽  
Land Surface ◽  
Cloud Cover ◽  
Landsat 8 ◽  
Field Scale ◽  
Spatiotemporal Resolution ◽  
Essential Information ◽  
Land Surface Phenology ◽  
The Earth ◽  
Sentinel 2

Accurate and timely land surface phenology (LSP) provides essential information for investigating the responses of terrestrial ecosystems to climate changes and quantifying carbon and surface energy cycles on the Earth. LSP has been widely investigated using daily Visible Infrared Imaging Radiometer Suite (VIIRS) or Moderate Resolution Imaging Spectroradiometer (MODIS) observations, but the resultant phenometrics are frequently influenced by surface heterogeneity and persistent cloud contamination in the time series observations. Recently, LSP has been derived from Landsat-8 and Sentinel-2 time series providing detailed spatial pattern, but the results are of high uncertainties because of poor temporal resolution. With the availability of data from Advanced Baseline Imager (ABI) onboard a new generation of geostationary satellites that observe the earth every 10–15 min, daily cloud-free time series could be obtained with high opportunities. Therefore, this study investigates the generation of synthetic high spatiotemporal resolution time series by fusing the harmonized Landsat-8 and Sentinel-2 (HLS) time series with the temporal shape of ABI data for monitoring field-scale (30 m) LSP. The algorithm is verified by detecting the timings of greenup and senescence onsets around north Wisconsin/Michigan states, United States, where cloud cover is frequent during spring rainy season. The LSP detections from HLS-ABI are compared with those from HLS or ABI alone and are further evaluated using PhenoCam observations. The result indicates that (1) ABI could provide ~3 times more high-quality observations than HLS around spring greenup onset; (2) the greenup and senescence onsets derived from ABI and HLS-ABI are spatially consistent and statistically comparable with a median difference less than 1 and 10-days, respectively; (3) greenup and senescence onsets derived from HLS data show sharp boundaries around the orbit-overlapped areas and shifts of ~13 days delay and ~15 days ahead, respectively, relative to HLS-ABI detections; and (4) HLS-ABI greenup and senescence onsets align closely to PhenoCam observations with an absolute average difference of less than 2 days and 5 days, respectively, which are much better than phenology detections from ABI or HLS alone. The result suggests that the proposed approach could be implemented the monitor of 30 m LSP over regions with persistent cloud cover.

scholarly journals Evaluation of a NIR camera for monitoring yield and nitrogen effect in sugarcane

2017 ◽  
Vol 35 (1) ◽  
pp. 82-91
Author(s):  
Cesar Edwin García ◽  
David Montero ◽  
Hector Alberto Chica
Keyword(s):  
Spatial Resolution ◽  
Vegetation Index ◽  
High Spatial Resolution ◽  
Early Stage ◽  
Vegetation Indices ◽  
Visible Spectrum ◽  
Crop Productivity ◽  
Spectral Information ◽  
Nitrogen Effect ◽  
Sugarcane Yield

The main objective of the research carried out in the sugar productive sector in Colombia is to improve crop productivity of sugarcane. The rise of RPAS, together with the use of multispectral cameras, which allows for high spatial resolution images and spectral information outside the visible spectrum, has generated an alternative nondestructive technological approach to monitoring crop sugarcane that must be evaluated and adapted to the specific conditions of Colombia's sugar productive sector. In this context, this paper assesses the potential of a modified camera (NIR) to discriminate three varieties of sugarcane, as well as three doses of fertilization and estimating the sugarcane yield at an early stage, for the three varieties through multiple vegetation indices. In this study, no significant differences were found by vegetation index between fertilization doses, and only significant differences between varieties were found when the fertilization was normal or high. Likewise, multiple regressions between scores derived from vegetation indices after applying PCA and productivity produced determinations of up to 56%.

scholarly journals A Multi-Sensor Comparative Analysis on the Suitability of Generated DEM from Sentinel-1 SAR Interferometry Using Statistical and Hydrological Models

Sensors ◽  
2020 ◽  
Vol 20 (24) ◽  
pp. 7214
Author(s):  
Ayub Mohammadi ◽  
Sadra Karimzadeh ◽  
Shazad Jamal Jalal ◽  
Khalil Valizadeh Kamran ◽  
Himan Shahabi ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Land Surface ◽  
Vital Role ◽  
Point Of View ◽  
Sar Interferometry ◽  
Slope Aspect ◽  
Analysis Tool ◽  
Alos Palsar ◽  
Whole Process ◽  
Cameron Highlands

Digital elevation model (DEM) plays a vital role in hydrological modelling and environmental studies. Many essential layers can be extracted from this land surface information, including slope, aspect, rivers, and curvature. Therefore, DEM quality and accuracy will affect the extracted features and the whole process of modeling. Despite freely available DEMs from various sources, many researchers generate this information for their areas from various observations. Sentinal-1 synthetic aperture radar (SAR) images are among the best Earth observations for DEM generation thanks to their availabilities, high-resolution, and C-band sensitivity to surface structure. This paper presents a comparative study, from a hydrological point of view, on the quality and reliability of the DEMs generated from Sentinel-1 data and DEMs from other sources such as AIRSAR, ALOS-PALSAR, TanDEM-X, and SRTM. To this end, pair of Sentinel-1 data were acquired and processed using the SAR interferometry technique to produce a DEM for two different study areas of a part of the Cameron Highlands, Pahang, Malaysia, a part of Sanandaj, Iran. Based on the estimated linear regression and standard errors, generating DEM from Sentinel-1 did not yield promising results. The river streams for all DEMs were extracted using geospatial analysis tool in a geographic information system (GIS) environment. The results indicated that because of the higher spatial resolution (compared to SRTM and TanDEM-X), more stream orders were delineated from AIRSAR and Sentinel-1 DEMs. Due to the shorter perpendicular baseline, the phase decorrelation in the created DEM resulted in a lot of noise. At the same time, results from ground control points (GCPs) showed that the created DEM from Sentinel-1 is not promising. Therefore, other DEMs’ performance, such as 90-meters’ TanDEM-X and 30-meters’ SRTM, are better than Sentinel-1 DEM (with a better spatial resolution).

Sign in / Sign up

Export Citation Format

Share Document