scholarly journals Overcoming Limitations of LoRa Physical Layer in Image Transmission

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3257 ◽  
Author(s):  
Akram Jebril ◽  
Aduwati Sali ◽  
Alyani Ismail ◽  
Mohd Rasid
Keyword(s):  
Data Transfer ◽  
Low Cost ◽  
Image Transmission ◽  
Image Sensor ◽  
Physical Layer ◽  
Forest Monitoring ◽  
Sensor Data ◽  
Area Network ◽  
Wide Area Network ◽  
The Future

As a possible implementation of a low-power wide-area network (LPWAN), Long Range (LoRa) technology is considered to be the future wireless communication standard for the Internet of Things (IoT) as it offers competitive features, such as a long communication range, low cost, and reduced power consumption, which make it an optimum alternative to the current wireless sensor networks and conventional cellular technologies. However, the limited bandwidth available for physical layer modulation in LoRa makes it unsuitable for high bit rate data transfer from devices like image sensors. In this paper, we propose a new method for mangrove forest monitoring in Malaysia, wherein we transfer image sensor data over the LoRa physical layer (PHY) in a node-to-node network model. In implementing this method, we produce a novel scheme for overcoming the bandwidth limitation of LoRa. With this scheme the images, which requires high data rate to transfer, collected by the sensor are encrypted as hexadecimal data and then split into packets for transfer via the LoRa physical layer (PHY). To assess the quality of images transferred using this scheme, we measured the packet loss rate, peak signal-to-noise ratio (PSNR), and structural similarity (SSIM) index of each image. These measurements verify the proposed scheme for image transmission, and support the industrial and academic trend which promotes LoRa as the future solution for IoT infrastructure.

scholarly journals Study of Data Transfer in a Heterogeneous LoRa-Satellite Network for the Internet of Remote Things

Sensors ◽  
2019 ◽  
Vol 19 (15) ◽  
pp. 3384 ◽  
Author(s):  
Ivan Lysogor ◽  
Leonid Voskov ◽  
Alexey Rolich ◽  
Sergey Efremov
Keyword(s):  
Data Collection ◽  
Satellite Communication ◽  
Data Transfer ◽  
Simulation Modelling ◽  
Satellite System ◽  
Satellite Network ◽  
Area Network ◽  
Wide Area Network ◽  
Data Encoding ◽  
Experimental Stand

In the absence of traditional communication infrastructures, the choice of available technologies for building data collection and control systems in remote areas is very limited. This paper reviews and analyzes protocols and technologies for transferring Internet of Things (IoT) data and presents an architecture for a hybrid IoT-satellite network, which includes a long range (LoRa) low power wide area network (LPWAN) terrestrial network for data collection and an Iridium satellite system for backhaul connectivity. Simulation modelling, together with a specialized experimental stand, allowed us to study the applicability of different methods of information presentation for the case of transmitting IoT data over low-speed satellite communication channels. We proposed a data encoding and packaging scheme called GDEP (Gateway Data Encoding and Packaging). It is based on the combination of data format conversion at the connection points of a heterogeneous network and message packaging. GDEP enabled the reduction of the number of utilized Short Burst Data (SBD) containers and the overall transmitted data size by almost five times.

scholarly journals LPWAN-Based Vehicular Monitoring Platform with a Generic IP Network Interface

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 264 ◽  
Author(s):  
José Santa ◽  
Ramon Sanchez-Iborra ◽  
Pablo Rodriguez-Rey ◽  
Luis Bernal-Escobedo ◽  
Antonio Skarmeta
Keyword(s):  
Low Cost ◽  
Traffic Monitoring ◽  
Wide Area ◽  
Network Interface ◽  
Area Network ◽  
Wide Area Network ◽  
Compression Scheme ◽  
Campus Environment ◽  
Transmission Distance ◽  
Monitoring Platform

Remote vehicle monitoring is a field that has recently attracted the attention of both academia and industry. With the dawn of the Internet of Things (IoT) paradigm, the possibilities for performing this task have multiplied, due to the emergence of low-cost and multi-purpose monitoring devices and the evolution of wireless transmission technologies. Low Power-Wide Area Network (LPWAN) encompasses a set of IoT communication technologies that are gaining momentum, due to their highly valued features regarding transmission distance and end-device energy consumption. For that reason, in this work we present a vehicular monitoring platform enabled by LPWAN-based technology, namely Long Range Wide Area Network (LoRaWAN). Concretely, we explore the end-to-end architecture considering vehicle data retrieving by using an On-Board Diagnostics II (OBD-II) interface, their compression with a novel IETF compression scheme in order to transmit them over the constrained LoRaWAN link, and information visualization through a data server hosted in the cloud, by means of a web-based dashboard. A key advance of the proposal is the design and development of a UNIX-based network interface for LPWAN communications. The whole system has been tested in a university campus environment, showing its capabilities to remotely track vehicle status in real-time. The conducted performance evaluation also shows high levels of reliability in the transmission link, with packet delivery ratios over 95%. The platform boosts the process of monitoring vehicles, enabling a variety of services such as mechanical failure prediction and detection, fleet management, and traffic monitoring, and is extensible to light vehicles with severe power constraints.

scholarly journals Low Cost Circularly Polarized Antenna for IoT Space Applications

Electronics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 1564
Author(s):  
Le Huy Trinh ◽  
Nguyen Vu Truong ◽  
Fabien Ferrero
Keyword(s):  
Circular Polarization ◽  
Radiation Pattern ◽  
Insertion Loss ◽  
Low Cost ◽  
Total Efficiency ◽  
Area Network ◽  
Wide Area Network ◽  
Space Applications ◽  
Circularly Polarized ◽  
Compact Size

This work presents the use of a three-element radiating structure for circularly polarized Low-Power Wide Area Network (LP-WAN) communication with space. The proposed structure has a 72 mm × 72 mm × 12 mm compact size with Right-Handed Circular Polarization (RHCP) and a 120∘ wide beamwidth radiation pattern. Printed on low-cost FR4 Epoxy substrate, a feeding network circuit based on Quasi Lumped Quadrature Coupler (QLQC), it achieves a −0.6 dB insertion loss and a very compact size. The final structure has a 69% total efficiency and a 3.14 dBic realized gain.

scholarly journals LoRaWAN Mesh Networks: A Review and Classification of Multihop Communication

Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4273
Author(s):  
Jeferson Rodrigues Cotrim ◽  
João Henrique Kleinschmidt
Keyword(s):  
Large Scale ◽  
Simulation Analysis ◽  
Mesh Networks ◽  
Smart Cities ◽  
Low Cost ◽  
Wide Area ◽  
Area Network ◽  
Full Potential ◽  
Wide Area Network ◽  
Coverage Area

The growth of the Internet of Things (IoT) led to the deployment of many applications that use wireless networks, like smart cities and smart agriculture. Low Power Wide Area Networks (LPWANs) meet many requirements of IoT, such as energy efficiency, low cost, large coverage area, and large-scale deployment. Long Range Wide Area Network (LoRaWAN) networks are one of the most studied and implemented LPWAN technologies, due to the facility to build private networks with an open standard. Typical LoRaWAN networks are single-hop in a star topology, composed of end-devices that transmit data directly to gateways. Recently, several studies proposed multihop LoRaWAN networks, thus forming wireless mesh networks. This article provides a review of the state-of-the-art multihop proposals for LoRaWAN. In addition, we carried out a comparative analysis and classification, considering technical characteristics, intermediate devices function, and network topologies. This paper also discusses open issues and future directions to realize the full potential of multihop networking. We hope to encourage other researchers to work on improving the performance of LoRaWAN mesh networks, with more theoretical and simulation analysis, as well as practical deployments.

scholarly journals Eco-Efficient Mobility in Smart City Scenarios

2020 ◽  
Vol 12 (20) ◽  
pp. 8443
Author(s):  
Ramon Sanchez-Iborra ◽  
Luis Bernal-Escobedo ◽  
José Santa
Keyword(s):  
Intelligent Transportation Systems ◽  
Smart City ◽  
Smart Cities ◽  
Low Cost ◽  
Transportation Systems ◽  
Area Network ◽  
Wide Area Network ◽  
Fully Integrated ◽  
Personal Mobility ◽  
Traffic Efficiency

Cooperative-Intelligent Transportation Systems (C-ITS) have brought a technological revolution, especially for ground vehicles, in terms of road safety, traffic efficiency, as well as in the experience of drivers and passengers. So far, these advances have been focused on traditional transportation means, leaving aside the new generation of personal vehicles that are nowadays flooding our streets. Together with bicycles and motorcycles, personal mobility devices such as segways or electric scooters are firm sustainable alternatives that represent the future to achieve eco-friendly personal mobility in urban settings. In a near future, smart cities will become hyper-connected spaces where these vehicles should be integrated within the underlying C-ITS ecosystem. In this paper, we provide a wide overview of the opportunities and challenges related to this necessary integration as well as the communication solutions that are already in the market to provide these moving devices with low-cost and efficient connectivity. We also present an On-Board Unit (OBU) prototype with different communication options based on the Low Power Wide Area Network (LPWAN) paradigm and several sensors to gather environmental information to facilitate eco-efficiency services. As the attained results suggest, this module allows personal vehicles to be fully integrated in smart city environments, presenting the possibilities of LoRaWAN and Narrow Band-Internet of Things (NB-IoT) communication technologies to provide vehicle connectivity and enable mobile urban sensing.

scholarly journals Low-Cost LoRaWAN Node for Agro-Intelligence IoT

Electronics ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 987 ◽  
Author(s):  
Antonio Valente ◽  
Sérgio Silva ◽  
Diogo Duarte ◽  
Filipe Cabral Pinto ◽  
Salviano Soares
Keyword(s):  
Low Cost ◽  
Environmental Parameters ◽  
Effective Control ◽  
Area Network ◽  
Wide Area Network ◽  
Lightning Strikes ◽  
Intelligent Sensors ◽  
Increase Productivity ◽  
Smart Agriculture ◽  
Water Tension

Intelligent agriculture in general, but especially when agricultural fields are very heterogeneous, requires a large number of sensors in order to obtain an effective control and thus increase productivity. This need becomes more evident in vineyards on the farms of the demarcated Douro region due to the specificities of the territory and the vineyards themselves. Thus, it is necessary to have low cost sensors which are, essentially, easy to install and maintain. In the present work, a node with these characteristics was developed, which, in addition, is low consumption and communicates wirelessly through a Long Rang Wide Area Network (LoRaWAN) network. To obtain an easy installation, a library of clusters was created for the LoRaWAN network and dedicated to sensors used in agriculture, especially those using an asynchronous serial protocol for intelligent sensors. Three nodes were developed and tested with sensors used in agriculture to measure several environmental parameters (soil and air temperature; wind speed, gust and direction; soil water content, water tension and electrical conductivity; solar radiation; precipitation; atmospheric and vapor pressure; relative humidity; and lightning strikes count). The three nodes send data to a server through an existing gateway on the farm. The data are decoded and sent to an Internet-of-Things analytics platform where it is aggregated, viewed and analyzed. Samples of the data collected are presented. The developed nodes are of small dimensions ( 85 × 65 × 35 m m ), thus making them easy to handle and install. Energy consumption depends on the distance to the gateway, and the number and type of sensors connected to each node. In the implemented cases, the maximum consumption was ≈ 400 μ A . The development of a cluster based library makes the node plug-and-play. The developed nodes will be a great step forward for the use of wireless sensors in smart agriculture in Douro vineyards.

Special Issue on Intelligent Integrated Systems for Human-Oriented Information Society

2000 ◽  
Vol 12 (5) ◽  
pp. 501-501
Author(s):  
Michitaka Kameyama ◽  
Keyword(s):  
Real World ◽  
Intelligent Transportation System ◽  
Data Transfer ◽  
Image Sensor ◽  
Sensor Data ◽  
Service Robot ◽  
Human Beings ◽  
Special Issue ◽  
Real World Data

Recent advance in the information technology makes our society very convenient from the viewpoint of human-to-human information communication. However, our new living style will require not only human-tohuman communication but also autonomous intelligent applications that support human beings such as an intelligent robot system, an intelligent transportation system, and a security/safe system as shown in Figure. These applications will contribute to human-oriented information society.Intelligent vehicle Home service robot Security The use of special-purpose VLSI processors capable of processing a large amount of real-world data is essential to make such applications realistic. In recent industrial trend, the special-purpose processors are called ""System LSIs"". One of the most important environmental informations in real-world applications is a vision information. The factor common to the applications is to catch an environment information moment by moment and to respond quickly with it. Therefore, it is important to make the response time from inputs to outputs very small. In this case, sensor data transfer bottleneck is not allowed as well as memory-to-PE (Processing Element) data transfer bottleneck. An image sensor signal processing VLSI together with image sensor devices is a key issue in such applications. From the above point of views, this special issue was planned to demonstrate the recent results of this area. Finally, I would like to express my appreciation to the authors for their efforts and contributions to this special issue and also the members of the Editorial Board for their cooperation.

Tunable Low Power UWB Transmitter for WBAN Application

2015 ◽  
Vol 24 (03) ◽  
pp. 1550040 ◽  
Author(s):  
V. Vinod Kumar ◽  
M. Meenakshi
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Efficiency ◽  
Delay Line ◽  
Data Transfer ◽  
Low Cost ◽  
Wireless Body Area Network ◽  
Superior Performance ◽  
Area Network ◽  
Coverage Area

This paper presents the design and simulation results for a Federal Communication Committee (FCC) complaint current starved delay line based Ultra Wide Band (UWB) Gaussian pulse transmitter, which is designed for operating in the 3.1–10.6 GHz range. The wavelet is a mono cycle Gaussian impulse wave, which is practically well suited for low cost, low power, low data rate wireless data transfer such as in wireless body area network (WBAN) applications. The transmitter operating frequency and bandwidth (BW) is controlled using a dc voltage provided at the input stage of a voltage controlled delay line (VCDL) and this aspect can be exploited for increasing the communication coverage area without compromising on the power consumption. A Gaussian wave shaping is performed for FCC compliance and the simulation has been carried out with 130 nm technology. The simulation of our design suggests an average dynamic power consumption of 1.11 mw for an energy efficiency of 14.2 pJ/pulse. The proposed IR-UWB transmitter design though a bit inferior in terms of the power efficiency, can claim superior performance with respect to tuning the BW, which is very relevant in a cognitive wireless networking scenario with other interfering signals.

scholarly journals Attack-aware Synchronization-free Data Timestamping in LoRaWAN

2022 ◽  
Vol 18 (1) ◽  
pp. 1-31
Author(s):  
Chaojie Gu ◽  
Linshan Jiang ◽  
Rui Tan ◽  
Mo Li ◽  
Jun Huang
Keyword(s):  
Low Power ◽  
Software Defined Radio ◽  
Sensor Data ◽  
Wide Area ◽  
Area Network ◽  
Affecting Factors ◽  
Wide Area Network ◽  
Critical System ◽  
Distributed Sensors ◽  
Free Data

Low-power wide-area network technologies such as long-range wide-area network (LoRaWAN) are promising for collecting low-rate monitoring data from geographically distributed sensors, in which timestamping the sensor data is a critical system function. This article considers a synchronization-free approach to timestamping LoRaWAN uplink data based on signal arrival time at the gateway, which well matches LoRaWAN’s one-hop star topology and releases bandwidth from transmitting timestamps and synchronizing end devices’ clocks at all times. However, we show that this approach is susceptible to a frame delay attack consisting of malicious frame collision and delayed replay. Real experiments show that the attack can affect the end devices in large areas up to about 50,000, m 2 . In a broader sense, the attack threatens any system functions requiring timely deliveries of LoRaWAN frames. To address this threat, we propose a LoRaTS gateway design that integrates a commodity LoRaWAN gateway and a low-power software-defined radio receiver to track the inherent frequency biases of the end devices. Based on an analytic model of LoRa’s chirp spread spectrum modulation, we develop signal processing algorithms to estimate the frequency biases with high accuracy beyond that achieved by LoRa’s default demodulation. The accurate frequency bias tracking capability enables the detection of the attack that introduces additional frequency biases. We also investigate and implement a more crafty attack that uses advanced radio apparatuses to eliminate the frequency biases. To address this crafty attack, we propose a pseudorandom interval hopping scheme to enhance our frequency bias tracking approach. Extensive experiments show the effectiveness of our approach in deployments with real affecting factors such as temperature variations.

scholarly journals Mathematical Model For Forwarding Packets In Communication Network

2021 ◽  
Author(s):  
Samaa Adel Ibrahim Hussein ◽  
Fayez Wanis Zaki ◽  
Mohammed Ashour
Keyword(s):  
Data Transfer ◽  
Solution Procedure ◽  
Area Network ◽  
Wide Area Network ◽  
Phase Type Distribution ◽  
Application Performance ◽  
Phase Type ◽  
The Matrix ◽  
Matrix Geometric Solution ◽  
System States

Abstract In recent years, SDN technology has been applied to several networks such as wide area network (WAN). IT provides many benefits, such as: enhancing data transfer, promoting Application performance and reducing deployment costs. Software Defined-WAN networks lack studies and references. This paper introduced a system for SD-WAN network using PH/PH/C queues. It concentrates on the study of algebraic estimates the probability distribution of the system states. The Matrix-Geometric solution procedure of a phase type distribution queue with first-come first-served discipline is used.

Sign in / Sign up

Export Citation Format

Share Document