Tunable Low Power UWB Transmitter for WBAN Application

2015 ◽  
Vol 24 (03) ◽  
pp. 1550040 ◽  
Author(s):  
V. Vinod Kumar ◽  
M. Meenakshi
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Efficiency ◽  
Delay Line ◽  
Data Transfer ◽  
Low Cost ◽  
Wireless Body Area Network ◽  
Superior Performance ◽  
Area Network ◽  
Coverage Area

This paper presents the design and simulation results for a Federal Communication Committee (FCC) complaint current starved delay line based Ultra Wide Band (UWB) Gaussian pulse transmitter, which is designed for operating in the 3.1–10.6 GHz range. The wavelet is a mono cycle Gaussian impulse wave, which is practically well suited for low cost, low power, low data rate wireless data transfer such as in wireless body area network (WBAN) applications. The transmitter operating frequency and bandwidth (BW) is controlled using a dc voltage provided at the input stage of a voltage controlled delay line (VCDL) and this aspect can be exploited for increasing the communication coverage area without compromising on the power consumption. A Gaussian wave shaping is performed for FCC compliance and the simulation has been carried out with 130 nm technology. The simulation of our design suggests an average dynamic power consumption of 1.11 mw for an energy efficiency of 14.2 pJ/pulse. The proposed IR-UWB transmitter design though a bit inferior in terms of the power efficiency, can claim superior performance with respect to tuning the BW, which is very relevant in a cognitive wireless networking scenario with other interfering signals.

scholarly journals Energy Efficient MAC Protocol for Low-Energy Critical Infrastructure Monitoring Networks Using Wakeup Radio

2012 ◽  
Vol 8 (4) ◽  
pp. 504946 ◽  
Author(s):  
Niamat Ullah ◽  
M. Sanaullah Chowdhury ◽  
Mosaddique Al Ameen ◽  
Kyung Sup Kwak
Keyword(s):  
Power Consumption ◽  
Data Transfer ◽  
Critical Infrastructure ◽  
Mac Protocol ◽  
Low Cost ◽  
Low Energy ◽  
Area Network ◽  
Monitoring Networks ◽  
Transfer Energy ◽  
Infrastructure Monitoring

Critical infrastructure monitoring applications are rapidly increasing. Application requirements include reliable data transfer, energy efficiency, and long deployment lifetime. These applications must also be able to operate in an extremely low-cost communication environment in order to be attractive to potential users. A low rate wireless personal area network can help control and manage the operations of such applications. In this paper, we present a medium access control (MAC) protocol for low-energy critical infrastructure monitoring (LECIM) applications. The proposed MAC protocol is based on a framed slotted aloha multiple access schemes. For downlink communication, we use a wakeup radio approach to avoid complex bookkeeping associated with the traditional MAC protocols. Analytical expressions for power consumption and delay are derived to analyze and compare the performance of our proposed protocol with the existing well-known T-MAC, B-MAC, X-MAC, ZigBee, and WiseMAC protocols. It is shown that our proposed protocol outperforms all the other protocols in terms of power consumption and delay.

scholarly journals Performance and Power Consumption Analysis of IEEE802.11ah for Smart Grid

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Zhe Zheng ◽  
Wenpeng Cui ◽  
Lei Qiao ◽  
Jinghong Guo
Keyword(s):  
Smart Grid ◽  
Power Consumption ◽  
Energy Saving ◽  
Sensor Network ◽  
Power Efficiency ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Low Cost ◽  
Optical Fiber Communication ◽  
Area Network

IEEE802.11ah is a Wireless Local Area Network (WLAN) designed for the application of Internet of Things (IoT) and Machine to Machine (M2M), mainly used in sensor network, smart metering, car network, health care, and other emerging fields. IEEE802.11ah inherits the IEEE802.11n∖ac technology. At present, smart grid has completed the installation of optical fiber communication as its backbone network; WLAN can be used to build new wireless sensor network for smart grid by improving the transmission distance, speed, and power efficiency. The critical features of 802.11ah make it a powerful candidate for WLAN in smart grid, such as intelligent substation sensor network and automatic metering system (AMS). This paper simulates the new added highly robust 1MHz bandwidth and Modulation Coding Scheme (MCS) 10 in the 802.11ah physical layer and analyzes the coverage range and energy-saving performance of 802.11ah based on the simulation results. The analysis shows that the 802.11ah at 1 MHZ MCS 10 mode can obtain 2.5-3 dB gain. Combined with advantages of Sub-1GHz working frequency, 802.11ah could enlarge the coverage range by five times, compared to 2.4 GHz Wi-Fi. On the other side, 802.11ah module used in the smart grid can greatly reduce power consumption, especially in the AMS with a 1.1 kW.H power savings per year. 802.11ah not only provides the flexibility and low cost features of wireless communication, but also brings coverage and energy-saving performance improvements, which leads to good economic benefit.

Design and Implementation of an Efficient Parallel LFSR Architecture for Wireless Communication Systems

2019 ◽  
Vol 14 ◽  
Author(s):  
A. Suresh Babu ◽  
B. Anand
Keyword(s):  
Wireless Communication ◽  
Power Consumption ◽  
Low Power ◽  
Communication Systems ◽  
High Speed ◽  
Design Tool ◽  
Shift Register ◽  
Linear Feedback ◽  
Wireless Communication Systems ◽  
Coverage Area

: A Linear Feedback Shift Register (LFSR) considers a linear function typically an XOR operation of the previous state as an input to the current state. This paper describes in detail the recent Wireless Communication Systems (WCS) and techniques related to LFSR. Cryptographic methods and reconfigurable computing are two different applications used in the proposed shift register with improved speed and decreased power consumption. Comparing with the existing individual applications, the proposed shift register obtained >15 to <=45% of decreased power consumption with 30% of reduced coverage area. Hence this proposed low power high speed LFSR design suits for various low power high speed applications, for example wireless communication. The entire design architecture is simulated and verified in VHDL language. To synthesis a standard cell library of 0.7um CMOS is used. A custom design tool has been developed for measuring the power. From the results, it is obtained that the cryptographic efficiency is improved regarding time and complexity comparing with the existing algorithms. Hence, the proposed LFSR architecture can be used for any wireless applications due to parallel processing, multiple access and cryptographic methods.

scholarly journals Smart Monitoring and Controlling of Appliances Using LoRa Based IoT System

Designs ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 17
Author(s):  
Nur-A-Alam ◽  
Mominul Ahsan ◽  
Md. Abdul Based ◽  
Julfikar Haider ◽  
Eduardo M. G. Rodrigues
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Modular Design ◽  
Real Life ◽  
Environmental Data ◽  
Automation System ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
At Home

In the era of Industry 4.0, remote monitoring and controlling appliance/equipment at home, institute, or industry from a long distance with low power consumption remains challenging. At present, some smart phones are being actively used to control appliances at home or institute using Internet of Things (IoT) systems. This paper presents a novel smart automation system using long range (LoRa) technology. The proposed LoRa based system consists of wireless communication system and different types of sensors, operated by a smart phone application and powered by a low-power battery, with an operating range of 3–12 km distance. The system established a connection between an android phone and a microprocessor (ESP32) through Wi-Fi at the sender end. The ESP32 module was connected to a LoRa module. At the receiver end, an ESP32 module and LoRa module without Wi-Fi was employed. Wide Area Network (WAN) communication protocol was used on the LoRa module to provide switching functionality of the targeted area. The performance of the system was evaluated by three real-life case studies through measuring environmental temperature and humidity, detecting fire, and controlling the switching functionality of appliances. Obtaining correct environmental data, fire detection with 90% accuracy, and switching functionality with 92.33% accuracy at a distance up to 12 km demonstrated the high performance of the system. The proposed smart system with modular design proved to be highly effective in controlling and monitoring home appliances from a longer distance with relatively lower power consumption.

Rack Server Solution in Data Center

2015 ◽  
Author(s):  
Sheng Kang ◽  
Guofeng Chen ◽  
Chun Wang ◽  
Ruiquan Ding ◽  
Jiajun Zhang ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Supply ◽  
Data Center ◽  
Power Efficiency ◽  
High Performance ◽  
High Efficiency ◽  
High Growth ◽  
General Purpose ◽  
Power Supplies

With the advent of big data and cloud computing solutions, enterprise demand for servers is increasing. There is especially high growth for Intel based x86 server platforms. Today’s datacenters are in constant pursuit of high performance/high availability computing solutions coupled with low power consumption and low heat generation and the ability to manage all of this through advanced telemetry data gathering. This paper showcases one such solution of an updated rack and server architecture that promises such improvements. The ability to manage server and data center power consumption and cooling more completely is critical in effectively managing datacenter costs and reducing the PUE in the data center. Traditional Intel based 1U and 2U form factor servers have existed in the data center for decades. These general purpose x86 server designs by the major OEM’s are, for all practical purposes, very similar in their power consumption and thermal output. Power supplies and thermal designs for server in the past have not been optimized for high efficiency. In addition, IT managers need to know more information about servers in order to optimize data center cooling and power use, an improved server/rack design needs to be built to take advantage of more efficient power supplies or PDU’s and more efficient means of cooling server compute resources than from traditional internal server fans. This is the constant pursuit of corporations looking at new ways to improving efficiency and gaining a competitive advantage. A new way to optimize power consumption and improve cooling is a complete redesign of the traditional server rack. Extracting internal server power supplies and server fans and centralizing these within the rack aims to achieve this goal. This type of design achieves an entirely new low power target by utilizing centralized, high efficiency PDU’s that power all servers within the rack. Cooling is improved by also utilizing large efficient rack based fans for airflow to all servers. Also, opening up the server design is to allow greater airflow across server components for improved cooling. This centralized power supply breaks through the traditional server power limits. Rack based PDU’s can adjust the power efficiency to a more optimum point. Combine this with the use of online + offline modes within one single power supply. Cold backup makes data center power to achieve optimal power efficiency. In addition, unifying the mechanical structure and thermal definitions within the rack solution for server cooling and PSU information allows IT to collect all server power and thermal information centrally for improved ease in analyzing and processing.

scholarly journals Energy and Spectrally Efficient Modulation Scheme for IoT Applications

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4382 ◽  
Author(s):  
Hany Hussein ◽  
Mohamed Elsayed ◽  
Mahmoud Fakhry ◽  
Usama Sayed Mohamed
Keyword(s):  
Low Power ◽  
Closed Form ◽  
Fading Channels ◽  
Low Cost ◽  
Superior Performance ◽  
Closed Form Expression ◽  
Modulation Scheme ◽  
Power Budget ◽  
Iot Applications ◽  
Phy Layer

Due to the Internet of Things (IoT) requirements for a high-density network with low-cost and low-power physical (PHY) layer design, the low-power budget transceiver systems have drawn momentous attention lately owing to their superior performance enhancement in both energy efficiency and hardware complexity reduction. As the power budget of the classical transceivers is envisioned by using inefficient linear power amplifiers (PAs) at the transmitter (TX) side and by applying high-resolution analog to digital converters (ADCs) at the receiver (RX) side, the transceiver architectures with low-cost PHY layer design (i.e., nonlinear PA at the TX and one-bit ADC at the RX) are mandated to cope with the vast IoT applications. Therefore, in this paper, we propose the orthogonal shaping pulses minimum shift keying (OSP-MSK) as a multiple-input multiple-output (MIMO) modulation/demodulation scheme in order to design the low-cost transceiver architectures associated with the IoT devices. The OSP-MSK fulfills a low-power budget by using constant envelope modulation (CEM) techniques at the TX side, and by applying a low-resolution one-bit ADC at the RX side. Furthermore, the OSP-MSK provides a higher spectral efficiency compared to the recently introduced MIMO-CEM with the one-bit ADC. In this context, the orthogonality between the in-phase and quadrature-phase components of the OSP are exploited to increase the number of transmitted bits per symbol (bps) without the need for extra bandwidth. The performance of the proposed scheme is investigated analytically and via Monte Carlo simulations. For the mathematical analysis, we derive closed-form expressions for assessing the average bit error rate (ABER) performance of the OSP-MSK modulation in conjunction with Rayleigh and Nakagami-m fading channels. Moreover, a closed-form expression for evaluating the power spectral density (PSD) of the proposed scheme is obtained as well. The simulation results corroborate the potency of the conducted analysis by revealing a high consistency with the obtained analytical formulas.

scholarly journals LoRaWAN Mesh Networks: A Review and Classification of Multihop Communication

Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4273
Author(s):  
Jeferson Rodrigues Cotrim ◽  
João Henrique Kleinschmidt
Keyword(s):  
Large Scale ◽  
Simulation Analysis ◽  
Mesh Networks ◽  
Smart Cities ◽  
Low Cost ◽  
Wide Area ◽  
Area Network ◽  
Full Potential ◽  
Wide Area Network ◽  
Coverage Area

The growth of the Internet of Things (IoT) led to the deployment of many applications that use wireless networks, like smart cities and smart agriculture. Low Power Wide Area Networks (LPWANs) meet many requirements of IoT, such as energy efficiency, low cost, large coverage area, and large-scale deployment. Long Range Wide Area Network (LoRaWAN) networks are one of the most studied and implemented LPWAN technologies, due to the facility to build private networks with an open standard. Typical LoRaWAN networks are single-hop in a star topology, composed of end-devices that transmit data directly to gateways. Recently, several studies proposed multihop LoRaWAN networks, thus forming wireless mesh networks. This article provides a review of the state-of-the-art multihop proposals for LoRaWAN. In addition, we carried out a comparative analysis and classification, considering technical characteristics, intermediate devices function, and network topologies. This paper also discusses open issues and future directions to realize the full potential of multihop networking. We hope to encourage other researchers to work on improving the performance of LoRaWAN mesh networks, with more theoretical and simulation analysis, as well as practical deployments.

Low Power Electronics for Square-Wave Piezoactuator Driving

2009 ◽  
Author(s):  
G. Biancuzzi ◽  
T. Lemke ◽  
F. Goldschmidtboeing ◽  
O. Ruthmann ◽  
H.-J. Schrag ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Efficiency ◽  
Low Voltage ◽  
Power Converter ◽  
Driving Voltage ◽  
Output Stage ◽  
Maximum Displacement ◽  
Artificial Sphincter ◽  
Charge Recovery

The German Artificial Sphincter System (GASS) project aims at the development of an implantable sphincter prosthesis driven by a micropump. During the last few years the feasibility of the concept has been proven. At present our team’s effort is focused on the compliance to safety regulations and on a very low power consumption of the system as a whole. Therefore a low-voltage multilayer piezoactuator has been developed to reduce the driving voltage of the micropump from approximately 300 Vpp to 40 Vpp. Doing so, the driving voltage is within the limits set by the regulations for active implants. The operation of the micropump at lower voltages, achieved using multilayer piezoactuators, has already resulted in a much better power efficiency. Nevertheless, in order to further reduce power consumption, we have also developed an innovative driving technique that we are going to describe and compare to other driving systems. A direct switching circuit has been developed where the buffer capacitor of the step-up converter has been replaced by the equivalent capacitance of the actuator itself. This avoids the switching of the buffer capacitor to the actuator, which would result in a very low efficiency. Usually, a piezoactuator needs a bipolar voltage drive to achieve maximum displacement. In our concept, the voltage inversion across the actuator is done using an h-bridge circuit, allowing the employment of one step-up converter only. The charge stored in the actuator is then partially recovered by means of a step-down converter which stores back the energy at the battery voltage level. The power consumption measurements of our concept are compared to a conventional driving output stage and also with inductive charge recovery circuits. In particular, the main advantage, compared to the latter systems, consists in the small inductors needed for the power converter. Other charge recovery techniques require very big inductors in order to have a significant power reduction with the capacitive loads we use in our application. With our design we will be able to achieve approximately 55% reduction in power consumption compared to the simplest conventional driver and 15% reduction compared to a charge recovery driver.

Sign in / Sign up

Export Citation Format

Share Document