scholarly journals Receiver-Initiated Handshaking MAC Based on Traffic Estimation for Underwater Sensor Networks ‡

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3895 ◽  
Author(s):  
Yuan Dong ◽  
Lina Pu ◽  
Yu Luo ◽  
Zheng Peng ◽  
Haining Mo ◽  
...  

In underwater sensor networks (UWSNs), the unique characteristics of acoustic channels have posed great challenges for the design of medium access control (MAC) protocols. The long propagation delay problem has been widely explored in recent literature. However, the long preamble problem with acoustic modems revealed in real experiments brings new challenges to underwater MAC design. The overhead of control messages in handshaking-based protocols becomes significant due to the long preamble in underwater acoustic modems. To address this problem, we advocate the receiver-initiated handshaking method with parallel reservation to improve the handshaking efficiency. Despite some existing works along this direction, the data polling problem is still an open issue. Without knowing the status of senders, the receiver faces two challenges for efficient data polling: when to poll data from the sender and how much data to request. In this paper, we propose a traffic estimation-based receiver-initiated MAC (TERI-MAC) to solve this problem with an adaptive approach. Data polling in TERI-MAC depends on an online approximation of traffic distribution. It estimates the energy efficiency and network latency and starts the data request only when the preferred performance can be achieved. TERI-MAC can achieve a stable energy efficiency with arbitrary network traffic patterns. For traffic estimation, we employ a resampling technique to keep a small computation and memory overhead. The performance of TERI-MAC in terms of energy efficiency, channel utilization, and communication latency is verified in simulations. Our results show that, compared with existing receiver-initiated-based underwater MAC protocols, TERI-MAC can achieve higher energy efficiency at the price of a delay penalty. This confirms the strength of TERI-MAC for delay-tolerant applications.

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2806 ◽  
Author(s):  
Faisal Alfouzan ◽  
Alireza Shahrabi ◽  
Seyed Ghoreyshi ◽  
Tuleen Boutaleb

Underwater Sensor Networks (UWSNs) utilise acoustic waves with comparatively lower loss and longer range than those of electromagnetic waves. However, energy remains a challenging issue in addition to long latency, high bit error rate, and limited bandwidth. Thus, collision and retransmission should be efficiently handled at Medium Access Control (MAC) layer in order to reduce the energy cost and also to improve the throughput and fairness across the network. In this paper, we propose a new reservation-based distributed MAC protocol called ED-MAC, which employs a duty cycle mechanism to address the spatial-temporal uncertainty and the hidden node problem to effectively avoid collisions and retransmissions. ED-MAC is a conflict-free protocol, where each sensor schedules itself independently using local information. Hence, ED-MAC can guarantee conflict-free transmissions and receptions of data packets. Compared with other conflict-free MAC protocols, ED-MAC is distributed and more reliable, i.e., it schedules according to the priority of sensor nodes which based on their depth in the network. We then evaluate design choices and protocol performance through extensive simulation to study the load effects and network scalability in each protocol. The results show that ED-MAC outperforms the contention-based MAC protocols and achieves a significant improvement in terms of successful delivery ratio, throughput, energy consumption, and fairness under varying offered traffic and number of nodes.


2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Xiujuan Du ◽  
Keqin Li ◽  
Xiuxiu Liu ◽  
Yishan Su

The characteristics of underwater acoustic channels such as long propagation delay and low bit rate cause the medium access control (MAC) protocols designed for radio channels to either be inapplicable or have low efficiency for underwater sensor networks (UWSNs). Meanwhile, due to high bit error, conventional end-to-end reliable transfer solutions bring about too many retransmissions and are inefficient in UWSN. In this paper, we present a recursive LT (RLT) code. With small degree distribution and recursive encoding, RLT achieves reliable transmission hop-by-hop while reducing the complexity of encoding and decoding in UWSN. We further propose an RLT code based handshake-free (RCHF) reliable MAC protocol. In RCHF protocol, each node maintains a neighbor table including the field of state, and packages are forwarded according to the state of a receiver, which can avoid collisions of sending-receiving and overhearing. The transmission-avoidance time in RCHF decreases data-ACK collision dramatically. Without RTS/CTS handshaking, the RCHF protocol improves channel utilization while achieving reliable transmission. Simulation results show that, compared with the existing reliable data transport approaches for underwater networks, RCHF can improve network throughput while decreasing end-to-end overhead.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Prabhjot Kaur ◽  
Hardeep Singh Saini

AbstractFiber wireless (Fi-Wi) communication network is the amalgamation of optical and wireless access networks, which provides better bandwidth for achieving efficient data transmission. Medium access control (MAC) protocols are used in the wireless network for controlling the data flow from the transmitter to the receiver end. The delay produced by these protocols tells about the system efficiency. This paper shows a Fi-Wi system in the long-term evaluation-advanced (LTE-A) environment, which incorporates the dependency of delay generated by the specific MAC protocols during the transmission process. This paper aimed to scrutinize the effects of Carrier Sense Multiplexing Access with Collision Detection (CSMA/CD), Carrier Sense Multiplexing Access with Collision Avoidance (CSMA/CA) and Slotted ALOHA on the performance of the Fi-Wi system. Free space optical (FSO) channel is incorporated to forward the data to user end. In such system, the optical signal is multiplexed using the Orthogonal Frequency Division Multiplexing (OFDM) technique and finally the data are fetched at the receiver end and different criterions such eye-height, Q-factor and bit error rate are evaluated. Simulation results are performed using MATLAB software. The comparative analysis is also performed in terms of data transmission efficiency, delay and throughput of MAC protocols. This shows the effective results of the proposed system according to the delay produced by MAC protocols.


Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2284
Author(s):  
Ibrahim B. Alhassan ◽  
Paul D. Mitchell

Medium access control (MAC) is one of the key requirements in underwater acoustic sensor networks (UASNs). For a MAC protocol to provide its basic function of efficient sharing of channel access, the highly dynamic underwater environment demands MAC protocols to be adaptive as well. Q-learning is one of the promising techniques employed in intelligent MAC protocol solutions, however, due to the long propagation delay, the performance of this approach is severely limited by reliance on an explicit reward signal to function. In this paper, we propose a restructured and a modified two stage Q-learning process to extract an implicit reward signal for a novel MAC protocol: Packet flow ALOHA with Q-learning (ALOHA-QUPAF). Based on a simulated pipeline monitoring chain network, results show that the protocol outperforms both ALOHA-Q and framed ALOHA by at least 13% and 148% in all simulated scenarios, respectively.


2014 ◽  
Vol 573 ◽  
pp. 407-411
Author(s):  
Chelliah Pandeeswaran ◽  
Natrajan Papa ◽  
Sundar G. Jayesh

MAC protocol design in Wireless sensor networks becomes vibrant research field for the past several years. In this paper an EE-Hybrid MAC protocol (Energy efficient hybrid Medium Access Control) has been proposed, which is energy efficient and low latency MAC protocol, which uses interrupt method to assign priority for certain wireless sensor nodes assumed to be present in critical loops of industrial process control domain. EE-Hybrid MAC overcomes some of the limitations in the existing approaches. Industrial wireless sensor network require a suitable MAC protocol which offers energy efficiency and capable of handling emergency situations in industrial automation domain. Time critical and mission critical applications demands not only energy efficiency but strict timeliness and reliability. Harsh environmental condition and dynamic network topologies may cause industrial sensor to malfunction, so the developed protocol must adapt to changing topology and harsh environment. Most of the existing MAC protocols have number of limitations for industrial application domain In industrial automation scenario, certain sensor loops are found to be time critical, where data’s have to be transferred without any further delay. The proposed EE-Hybrid MAC protocol is simulated in NS2 environment, from the result it is observed that proposed protocol provides better performance compared to the conventional MAC protocols.


2012 ◽  
Vol 8 (1) ◽  
pp. 834784 ◽  
Author(s):  
Joseph Kabara ◽  
Maria Calle

Many researchers employ IEEE802.15.4 as communication technology for wireless sensor networks (WSNs). However, medium access control (MAC) layer requirements for communications in wireless sensor networks (WSNs) vary because the network is usually optimized for specific applications. Thus, one particular standard will hardly be suitable for every possible application. Two general categories of MAC techniques exist: contention based and schedule based. This paper explains these two main approaches and includes examples of each one. The paper concludes with a unique performance analysis and comparison of benefits and limitations of each protocol with respect to WSNs.


2021 ◽  
Vol 6 (6) ◽  
pp. 39-53
Author(s):  
Hanan Alahmadi ◽  
Fatma Boabdullah

Wireless Sensor Networks (WSNs) are witnessing a momentum spread especially with the growth of the Internet of Things (IoT) paradigm. Indeed, WSNs are considered as the main enabling infrastructure for IoT networks. Nowadays, the emerging WSNs applications require not only long network lifespan but also considerably high data rate. Consequently, conceiving Multichannel MAC protocols that save the scarceenergy budget of sensor nodes while providing high network throughput is crucial for the emerging WSNs applications. In this paper, a thorough review of recent multichannel MAC protocols is provided along with a classification framework to deeply understand the design aspects for each protocol.


Electronics ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 534 ◽  
Author(s):  
Mahendra Ram ◽  
Sushil Kumar ◽  
Vinod Kumar ◽  
Ajay Sikandar ◽  
Rupak Kharel

Due to the rapidly growing sensor-enabled connected world around us, with the continuously decreasing size of sensors from smaller to tiny, energy efficiency in wireless sensor networks has drawn ample consideration in both academia as well as in industries’ R&D. The literature of energy efficiency in wireless sensor networks (WSNs) is focused on the three layers of wireless communication, namely the physical, Medium Access Control (MAC) and network layers. Physical layer-centric energy efficiency techniques have limited capabilities due to hardware designs and size considerations. Network layer-centric energy efficiency approaches have been constrained, in view of network dynamics and available network infrastructures. However, energy efficiency at the MAC layer requires a traffic cooperative transmission control. In this context, this paper presents a one-dimensional discrete-time Markov chain analytical model of the Timeout Medium Access Control (T-MAC) protocol. Specifically, an analytical model is derived for T-MAC focusing on an analysis of service delay, throughput, energy consumption and power efficiency under unsaturated traffic conditions. The service delay model calculates the average service delay using the adaptive sleep wakeup schedules. The component models include a queuing theory-based throughput analysis model, a cycle probability-based analytical model for computing the probabilities of a successful transmission, collision, and the idle state of a sensor, as well as an energy consumption model for the sensor’s life cycle. A fair performance assessment of the proposed T-MAC analytical model attests to the energy efficiency of the model when compared to that of state-of-the-art techniques, in terms of better power saving, a higher throughput and a lower energy consumption under various traffic loads.


Sign in / Sign up

Export Citation Format

Share Document