scholarly journals A Charging-Aware Multi-Mode Routing Protocol for Data Collection in Wireless Rechargeable Sensor Networks

Sensors ◽  
2019 ◽  
Vol 19 (15) ◽  
pp. 3338
Author(s):  
Shih-Chang Huang
Keyword(s):  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Energy Use ◽  
Minimum Spanning Tree ◽  
Operation Time ◽  
Propagation Delay ◽  
Propagation Delay Time ◽  
Wireless Rechargeable Sensor Networks ◽  
Multi Mode

This paper proposes a charging-aware multi-mode routing protocol (CMRP) to collect data in the wireless rechargeable sensor networks. The routing mechanism in CMRP is not steady but changes according to the energy charging status of sensors. Sensors that cannot replenish their energy efficiency use the routing protocol with less energy consumption. On the contrary, sensors that can replenish their energy use the low propagation delay routing protocol. A novel heuristic chaining mechanism based on multi-level convex hull circle (MCC) is also proposed. Simulation results show that CMRP not only has longer operation time than LEACH and PEGASIS but also has the shortest propagation delay time. The lifetime of CMRP is less than the minimum spanning tree by about 1%, but the propagation delay is shorter than MSTP about 21–28%. In addition, CMRP considers both reducing energy consumption and shortening the propagation delay at the same time. The life-delay rate of the CMRP is close to the optimal results.

PERFORMANCE EVALUATION ANALYSIS OF WIRELESS SENSOR NETWORKS ROUTING PROTOCOLS IN SMART GRIDS

2016 ◽  
Vol 26 (1) ◽  
pp. 17
Author(s):  
Carlos Deyvinson Reges Bessa
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Smart Grids ◽  
Network Routing ◽  
Base Station ◽  
Wireless Sensor ◽  
Delay Jitter ◽  
La Red

ABSTRACTThis work aims to study which wireless sensor network routing protocol is more suitable for Smart Grids applications, through simulation of AODV protocols, AOMDV, DSDV and HTR in the NS2 simulation environment. Was simulated a network based on a residential area with 47 residences, with one node for each residence and one base station, located about 25m from the other nodes. Many parameters, such as packet loss, throughput, delay, jitter and energy consumption were tested.  The network was increased to 78 and 93 nodes in order to evaluate the behavior of the protocols in larger networks. The tests proved that the HTR is the routing protocol that has the best results in performance and second best in energy consumption. The DSDV had the worst performance according to the tests.Key words.- Smart grid, QoS analysis, Wireless sensor networks, Routing protocols.RESUMENEste trabajo tiene como objetivo estudiar el protocolo de enrutamiento de la red de sensores inalámbricos es más adecuado para aplicaciones de redes inteligentes, a través de la simulación de protocolos AODV, AOMDV, DSDV y HTR en el entorno de simulación NS2. Se simuló una red basada en una zona residencial con 47 residencias, con un nodo para cada residencia y una estación base, situada a unos 25 metros de los otros nodos. Muchos parámetros, tales como la pérdida de paquetes, rendimiento, retardo, jitter y el consumo de energía se probaron. La red se incrementó a 78 y 93 nodos con el fin de evaluar el comportamiento de los protocolos de redes más grandes. Las pruebas demostraron que el HTR es el protocolo de enrutamiento que tiene los mejores resultados en el rendimiento y el segundo mejor en el consumo de energía. El DSDV tuvo el peor desempeño de acuerdo a las pruebas.Palabras clave.- redes inteligentes, análisis de calidad de servicio, redes de sensores inalámbricas, protocolos de enrutamiento.

scholarly journals An Enhanced Heterogeneous Gateway-Based Energy-Aware Multi-hop Routing Protocol for Wireless Sensor Networks

2022 ◽  
Author(s):  
Fuseini Jibreel ◽  
Emmanuel Tuyishimire ◽  
I M Daabo
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Data Transmission ◽  
Base Station ◽  
Communication Strategy ◽  
Wireless Sensor ◽  
Energy Aware ◽  
Routing Scheme

Wireless Sensor Networks (WSNs) continue to provide essential services for various applications such as surveillance, data gathering, and data transmission from the hazardous environments to safer destinations. This has been enhanced by the energy-efficient routing protocols that are mostly designed for such purposes. Gateway-based Energy-Aware Multi-hop Routing protocol (MGEAR) is one of the homogenous routing schemes that was recently designed to more efficiently reduce the energy consumption of distant nodes. However, it has been found that the protocol has a high energy consumption rate, lower stability period, less data transmission to the Base station (BS). In this paper, an enhanced Heterogeneous Gateway-based Energy-Aware multi-hop routing protocol ( HMGEAR) is proposed. The proposed routing scheme is based on the introduction of heterogeneous nodes in the existing scheme, selection of the head based on the residual energy, introduction of multi-hop communication strategy in all the regions of the network, and implementation of energy hole elimination technique. Results show that the proposed routing scheme outperforms two existing ones.

scholarly journals Energy-efficient hierarchical routing in wireless sensor networks based on Fog Computing

2020 ◽  
Author(s):  
Ademola Abidoye ◽  
Boniface Kabaso
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Data Transmission ◽  
Energy Efficient ◽  
Fog Computing ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Hierarchical Routing

Abstract Wireless sensor networks (WSNs) have been recognized as one of the most essential technologies of the 21st century. The applications of WSNs are rapidly increasing in almost every sector because they can be deployed in areas where cable and power supply are difficult to use. In the literature, different methods have been proposed to minimize energy consumption of sensor nodes so as to prolong WSNs utilization. In this article, we propose an efficient routing protocol for data transmission in WSNs; it is called Energy-Efficient Hierarchical routing protocol for wireless sensor networks based on Fog Computing (EEHFC). Fog computing is integrated into the proposed scheme due to its capability to optimize the limited power source of WSNs and its ability to scale up to the requirements of the Internet of Things applications. In addition, we propose an improved ant colony optimization (ACO) algorithm that can be used to construct optimal path for efficient data transmission for sensor nodes. The performance of the proposed scheme is evaluated in comparison with P-SEP, EDCF, and RABACO schemes. The results of the simulations show that the proposed approach can minimize sensor nodes’ energy consumption, data packet losses and extends the network lifetime

scholarly journals Enhancement of Data Collection Performance in Wireless Sensor Networks Based on Path-Constrained Mobile Sink

2021 ◽  
Vol 14 (1) ◽  
pp. 400-409
Author(s):  
Mohamed Borham ◽  
◽  
Ghada Khoriba ◽  
Mostafa-Sami Mostafa ◽  
◽  
...  
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Data Collection ◽  
Routing Protocol ◽  
Maximum Amount ◽  
Wireless Sensor ◽  
Collection Process ◽  
Data Collection Process ◽  
Energy Limitation

Due to the energy limitation in Wireless Sensor Networks (WSNs), most researches related to data collection in WSNs focus on how to collect the maximum amount of data from the network with minimizing the energy consumption as much as possible. Many types of research that are related to data collection are proposed to overcome this issue by using mobility with path constrained as Maximum Amount Shortest Path routing Protocol (MASP) and zone-based algorithms. Recently, Zone-based Energy-Aware Data Collection Protocol (ZEAL) and Enhanced ZEAL have been presented to reduce energy consumption and provide an acceptable data delivery rate. However, the time spent on data collection operations should be taken into account, especially concerning real-time systems, as time is the most critical factor for these systems' performance. In this paper, a routing protocol is proposed to improve the time needed for the data collection process considering less energy consumption. The presented protocol uses a novel path with a communication time-slot assignment algorithm to reduce the count of cycles that are needed for the data collection process with reduction of 50% of the number of cycles needed for other protocols. Therefore, the time and energy needed for data collection are reduced by approximately 25%and 6% respectively, which prolongs the network lifetime. The proposed protocol is called Energy-Time Aware Data Collection Protocol (ETCL).

scholarly journals A PSO-Based Uneven Dynamic Clustering Multi-Hop Routing Protocol for Wireless Sensor Networks

Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1835 ◽  
Author(s):  
Ruan ◽  
Huang
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Cluster Head ◽  
Base Station ◽  
Wireless Sensor ◽  
Dynamic Clustering ◽  
Energy Efficient Routing

Since wireless sensor networks (WSNs) are powered by energy-constrained batteries, many energy-efficient routing protocols have been proposed to extend the network lifetime. However, most of the protocols do not well balance the energy consumption of the WSNs. The hotspot problem caused by unbalanced energy consumption in the WSNs reduces the network lifetime. To solve the problem, this paper proposes a PSO (Particle Swarm Optimization)-based uneven dynamic clustering multi-hop routing protocol (PUDCRP). In the PUDCRP protocol, the distribution of the clusters will change dynamically when some nodes fail. The PSO algorithm is used to determine the area where the candidate CH (cluster head) nodes are located. The adaptive clustering method based on node distribution makes the cluster distribution more reasonable, which balances the energy consumption of the network more effectively. In order to improve the energy efficiency of multi-hop transmission between the BS (Base Station) and CH nodes, we also propose a connecting line aided route construction method to determine the most appropriate next hop. Compared with UCCGRA, multi-hop EEBCDA, EEMRP, CAMP, PSO-ECHS and PSO-SD, PUDCRP prolongs the network lifetime by between 7.36% and 74.21%. The protocol significantly balances the energy consumption of the network and has better scalability for various sizes of network.

MNVPCS: Multinode Virtual-Point–Based Charging Scheme to Prolong the Lifetime of Wireless Rechargeable Sensor Networks

2019 ◽  
Vol 63 (2) ◽  
pp. 283-294
Author(s):  
Hong-Yi Chang ◽  
Zih-Huan Hang ◽  
Yih-Jou Tzang
Keyword(s):  
Energy Consumption ◽  
Sensor Networks ◽  
Experimental Results ◽  
Sensor Nodes ◽  
Wireless Charging ◽  
Mobile Wireless ◽  
Wireless Rechargeable Sensor Networks ◽  
Virtual Point ◽  
Over Time

Abstract Wireless-charging technology can utilize a mobile wireless charging vehicle (WCV) to rescue dying nodes by supplementing their remaining energy, and using WCVs in this way forms wireless rechargeable sensor networks (WRSNs). However, a WCV in a WRSN encounters several challenges, collectively called the optimized charging problem. This problem involves a set of sensor nodes randomly distributed on the ground for which the WCV must determine an appropriate travel path to charge the sensor nodes. Because these sensor nodes have different workloads, they exhibit different energy consumption profiles over time. Resolving the above-mentioned problem requires the determination of the priority of charging the sensor nodes based on the order in which they are expected to die and subsequently finding the most efficient path to charge the sensor nodes such that sensor death is avoided for as long as possible. Furthermore, the most efficient placement of the charging point needs to be considered when planning the charging path. To address this, the proposed multinode virtual point-based charging scheme (MNVPCS) considers both the planning of an efficient charging and the best location for the charging point. Experimental results show that MNVPCS can improve the lifetime of the entire WRSN and substantially outperform other methods on this measure.

A STATIC-LEACH WSNs for Hazardous Materials Monitoring

2012 ◽  
Vol 463-464 ◽  
pp. 261-265
Author(s):  
Fei Hui ◽  
Xiao Le Wang ◽  
Xin Shi
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Low Cost ◽  
Hazardous Materials ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Hazardous Materials Transportation ◽  
Adaptive Clustering

In this paper, hazardous materials transportation monitoring system is designed, implemented, and tested using Wireless Sensor Networks (WSNs). According to energy consumption and response time during clustering of Wireless Sensor Networks LEACH (Low Energy Adaptive Clustering Hierarchy) routing protocol, we proposed STATIC-LEACH routing protocol based on static clustering, it can effectively reduce energy consumption of the wireless sensor nodes and reduce network latency of cluster. With WSN and GSM/GPRS, low cost and easy deployment remote monitoring is possible without interfering with the operation of the transportation.

scholarly journals SPARCO: Stochastic Performance Analysis with Reliability and Cooperation for Underwater Wireless Sensor Networks

2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
Sheeraz Ahmed ◽  
Nadeem Javaid ◽  
Ashfaq Ahmad ◽  
Imran Ahmed ◽  
Mehr Yahya Durrani ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Sensor Networks ◽  
Performance Analysis ◽  
Routing Protocol ◽  
Spatial Diversity ◽  
Sensor Nodes ◽  
Underwater Sensor Networks ◽  
Energy Efficient Routing ◽  
Cooperative Routing ◽  
Key Factor

Reliability is a key factor for application-oriented Underwater Sensor Networks (UWSNs) which are utilized for gaining certain objectives and a demand always exists for efficient data routing mechanisms. Cooperative routing is a promising technique which utilizes the broadcast feature of wireless medium and forwards data with cooperation using sensor nodes as relays. Here, we present a cooperation-based routing protocol for underwater networks to enhance their performance called Stochastic Performance Analysis with Reliability and Cooperation (SPARCO). Cooperative communication is explored in order to design an energy-efficient routing scheme for UWSNs. Each node of the network is assumed to be consisting of a single omnidirectional antenna and multiple nodes cooperatively forward their transmissions taking advantage of spatial diversity to reduce energy consumption. Both multihop and single-hop schemes are exploited which contribute to lowering of path-losses present in the channels connecting nodes and forwarding of data. Simulations demonstrate that SPARCO protocol functions better regarding end-to-end delay, network lifetime, and energy consumption comparative to noncooperative routing protocol—improved Adaptive Mobility of Courier nodes in Threshold-optimized Depth-based routing (iAMCTD). The performance is also compared with three cooperation-based routing protocols for UWSN: Cognitive Cooperation (Cog-Coop), Cooperative Depth-Based Routing (CoDBR), and Cooperative Partner Node Selection Criteria for Cooperative Routing (Coop Re and dth).

Sign in / Sign up

Export Citation Format

Share Document