scholarly journals An Electrical Resistivity Method of Characterizing Hydromechanical and Structural Properties of Compacted Loess During Constant Rate of Strain Compression

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4783
Author(s):  
Pengju Qin ◽  
Yubo Liu ◽  
Zhiwei Song ◽  
Fuli Ma ◽  
Yongbao Wang ◽  
...  

Hydromechanical and structural properties of compacted loess have a significant impact on the stability and reliability of subbase and subgrade, which needs to be quickly determined in the field and laboratory. Hence, an electrical resistivity method was used to characterize the hydromechanical and structural properties of compacted loess during constant rate of strain compression. In the present work, compacted loess samples with a dry density of 1.7 g/cm3, a diameter of 64 mm, a height of 10 mm and different water content ranging from 5–25% were prepared. The constant rate of strain (CRS) tests were conducted by a developed oedometer cell equipped with a pair of horizontal circular electrodes (diameter of 20 mm) and vertical rectangular electrodes (width of 3.5 mm) to determine the electrical resistivity of compacted loess. The results showed that as average water content increases, plastic compression indices increase from 0.220 to 0.350 and the elastic compression indices increase from 0.0152 to 0.030, but they decrease to 0.167 and 0.010 and yield stress decreases from 381.28 kPa to 72.35 kPa. Moreover, as vertical strain increases, the variation trend of average formation factor and average shape factor for the lower water content decreases but increases for the maximum water content, and the anisotropy index first decrease and then tend to increase slightly, which indicates that the structural properties of unsaturated and saturated samples during compression exhibits different trend and the anisotropy of samples tend to be stable as vertical strain increases. As the water content increases, the average formation factor and average shape factor decrease, but the anisotropy index first decreases then increases, suggesting that water content has a significant impact on these electrical indices. More important, The coefficients of average formation factor decrease from 33.830 to −1.698 and the coefficients of average shape factor decrease from 8.339 to −0.398 as water content increases, whereas there is less variation for the coefficient of anisotropic index with a value of 2.190. An equation correlating average formation factor and water content and vertical strain is regressed to characterize the hydromechanical properties of compacted loess by measuring its impedance, which can be used to evaluate the stability of compacted loessic ground and subgrade.

2012 ◽  
Vol 204-208 ◽  
pp. 22-27
Author(s):  
Yan Zhu ◽  
Yun Xu Chen

Compression and collapse of unsaturated compacted loess are studied by using dry density and water content which easily controlled in engineering, the controlling range of dry density and water content are confirmed respectively. Then the deformation of compression and collapse and the frequency of engineering damager occurrence can be decreased. In addition, the mechanical characteristics of loess in different directions may differ because the loess was consolidated only under the condition of its upper weight of soil and load. The conventional mechanical experiments, including one-dimensional compress and collapse test, were conducted with the specimen of loess soil in different angle from the original horizontal plane. The test result shows that the loess is anisotropic


2015 ◽  
Vol 52 (11) ◽  
pp. 1699-1713 ◽  
Author(s):  
G.H. Cai ◽  
Y.J. Du ◽  
S.Y. Liu ◽  
D.N. Singh

Soil electrical resistivity has been used quite extensively for assessing mechanical properties of chemically treated soils in the recent past. One of the most innovative applications of this technique could be in the field of ground improvement wherein carbonated reactive magnesia (MgO) is employed for treating soils. With this in view, a systematic study that targets the application of electrical resistivity to correlate physical and strength characteristics of the carbonated reactive MgO-admixed silty soil is initiated, and its details are presented in this manuscript. To achieve this, reactive MgO-admixed soils were carbonized by exposing them to CO2 for different durations, and subsequently their electrical resistivity and unconfined compressive strength were measured. In this context, the role of a parameter, the ratio of the initial water content of the virgin soil to reactive MgO content (designated as w0/c), has been highlighted. It has also been demonstrated that w0/c is able to correlate, uniquely and precisely, with the physicochemical parameters of the soils (viz., unit weight, water content at failure, porosity, degree of saturation, and soil pH), electrical resistivity, and unconfined compressive strength at various carbonation times. In addition, microstructural properties have been obtained from the X-ray diffraction, scanning electron microscopy, and mercury intrusion porosimetry analyses. These properties have been used to substantiate the findings related to the carbonation of the reactive MgO-admixed soils.


2019 ◽  
Vol 286 ◽  
pp. 449-458 ◽  
Author(s):  
Chuanjie Chen ◽  
Weiqing Fu ◽  
Qing Chang ◽  
Baodong Zheng ◽  
Yi Zhang ◽  
...  

1987 ◽  
Vol 33 (115) ◽  
pp. 311-314 ◽  
Author(s):  
Geoff Brand ◽  
Veijo Pohjola ◽  
Roger Leb. Hooke

AbstractElectrical resistivity measurements were made in a series of closely spaced holes drilled to the base of Storglaciären. Electrodes were lowered to the bottoms of the holes where they made contact with the substrate beneath the glacier. The measurements show that a layer of till, ~0.4–0.7 m thick, is present at the base of the glacier. The low resistivity of the layer indicates that it has a high water content, compared with tills of similar composition in the pro-glacial environment. A marked reduction in resistivity after a heavy rain storm demonstrates that the water content is sensitive to variations in water input at the surface.


Sign in / Sign up

Export Citation Format

Share Document