The Application of Electromagnetic Sensors for Determination of Cherenkov Cone Inside and in the Vicinity of the Detector Volume in Any Environment Known

The neutrinos of cosmic radiation, due to interaction with any known medium in which the Cherenkov detector is used, produce energy radiation phenomena in the form of a Cherenkov cone, in very large frequency spectrum. These neutrinos carry with them the information about the phenomena that produced them and by detecting the electromagnetic energies generated by the Cherenkov cone, we can find information about the phenomena that formed in the universe, at a much greater distance, than possibility of actually detection with current technologies. At present, a very high number of sensors for detection electromagnetic energy is required. Thus, some sensors may detect very low energy levels, which can lead to the erroneous determination of the Cherenkov cone, thus leading to information errors. As a novelty, we propose, to use these sensors for determination of the dielectrically permittivity of any known medium in which the Cherenkov detector is used, by preliminary measurements, the subsequent simulation of the data and the reconstruction of the Cherenkov cone, leading to a significant reduction of problems and minimizing the number of sensors, implicitly the cost reductions. At the same time, we offer the possibility of reconstructing the Cherenkov cone outside the detector volume.

Download Full-text

EVALUATING THE ALTERNATIVE SOLUTIONS OF WALL INSULATION BY MULTICRITERIA METHODS/PASTATŲ SIENŲ ŠILTINIMO VARIANTŲ VERTINIMAS TAIKANT DAUGIAKRITERIUS METODUS

Journal of Civil Engineering and Management ◽

10.3846/1392-3730.2008.14.20 ◽

2008 ◽

Vol 14 (4) ◽

pp. 217-226 ◽

Cited By ~ 96

Author(s):

Romualdas Ginevičius ◽

Valentinas Podvezko ◽

Saulius Raslanas

Keyword(s):

Economic Effect ◽

Evaluation Methods ◽

Multicriteria Evaluation ◽

Subsequent Determination ◽

Calculation Results ◽

Materials Used ◽

The Cost ◽

Alternative Solutions ◽

Very High

The economic effect of buildings’ renovation largely depends on implementation of energy saving methods and devices. A very high economic effect is achieved by wall insulation. In this respect, it is even higher than the replacement of windows. The alternative solutions of wall insulation of buildings differ in the materials used, labour expenditure and other aspects. The cost of renovation depends on the solutions made. The criteria describing the available wall insulation alternatives may have different values. Moreover, they may change in different directions, i.e. a higher value of some criteria denotes a better state, while for others they mean a worse situation. In this environment, a compromise variant is required, which can be found by multicriteria evaluation methods. To reduce the effect of various methods on calculation results, it can be recommended to assess the object (or phenomenon) considered by several different methods, with a subsequent determination of the average estimate value. In this way, the disadvantages of some particular multicriteria evaluation methods could be compensated by the advantages of others. The integration of methods will be correct if there is a correlation between the values obtained by different methods. Santrauka Ekonominis pastatų renovacijos efektyvumas priklauso nuo energiją taupančių priemonių įgyvendinimo. Pastatų sienų šiltinimas yra viena iš geriausių priemonių ir net efektyvesnis energijos taupymo požiūriu negu langų keitimas. Pastatų sienų šiltinimo variantai skiriasi vienas nuo kito pagal medžiagas, darbo sąnaudas ir pan. Nuo to priklauso renovacijos kaina. Kriterijai, atspindintys skirtingus sienų šiltinimo variantus, gali turėti įvairių reikšmių. Gali skirtis jų kitimo kryptys, t. y. vienų kriterijų reikšmių didėjimas padėtį gerina, kitų – blogina. Kompromisiniam variantui pasirinkti padeda daugiakriterio vertinimo metodai (MCDA). Norint mažinti metodų specifikos įtaką skaičiavimų rezultatams, tą patį nagrinėjamą reiškinį tikslinga vertinti keliais būdais, paskui nustatyti šio vertinimo vidurkį. Tokiu atveju vienų daugiakriterio vertinimo būdų trūkumus kompensuoja kitų būdų privalumai. Metodų susiejimas bus korektiškas, jeigu reikšmės, gautos naudojant įvairius būdus, tarpusavyje koreliuoja.

Download Full-text

Measuring the Thickness of Metal Films: A Selection Guide to the Most Suitable Technique

Materials Proceedings ◽

10.3390/ciwc2020-06823 ◽

2020 ◽

Vol 2 (1) ◽

pp. 12

Author(s):

Walter Giurlani ◽

Enrico Berretti ◽

Massimo Innocenti ◽

Alessandro Lavacchi

Keyword(s):

Metal Film ◽

Metal Films ◽

Investigation Methods ◽

Sample Data ◽

Precision And Accuracy ◽

The Cost ◽

Non Destructive ◽

Suitable Technique ◽

Very High

The determination of thickness has a fundamental importance in all fields in which the implementation of films and coatings are required and takes a crucial role in the electroplating sector. The thickness influences many aspects of the coatings such as electrical, mechanical, corrosion protection, and even aesthetic properties. In the multitude of applications of thin layer coatings, the variability of thicknesses and materials is very high, as well as the variability of possible techniques that can be used to determine the characteristics of the layers of interest. The first distinction that can be made between these techniques is that which divides destructive techniques from non-destructive ones, in which, however, the semi- or micro-destructive techniques are immediately difficult to place. Other important parameters to consider are the cost, both for the purchase of the instrumentation and for each single analysis, the difficulties in preparing and measuring the sample, data processing, and obviously the detectable thickness ranges, the possible measurable materials, and precision and accuracy. The purpose of this work is to compare the characteristics of the various investigation methods, with a particular focus on metal film applications, so that it will be easier to choose the most suitable technique for each purpose.

Download Full-text

Mekanisme Dan Proteksi Jaminan Nasabah Pada Gadai Informal

Liquidity ◽

10.32546/lq.v6i2.27 ◽

2017 ◽

Vol 6 (2) ◽

pp. 103-109

Author(s):

Yuri Nanda Larasati ◽

Jafril Khalil

Keyword(s):

Qualitative Research ◽

Research Methods ◽

Financial Services ◽

Field Data ◽

Qualitative Research Methods ◽

Research Field ◽

Consumer Society ◽

Library Research ◽

The Cost

Regulation of the financial services authority (OJK) No. 31/POJK.05/2016 on Venture had arranged that the financial services agency on the basis of the law of pledge is in coaching and supervision OJK. Yet the existence of laws – invitation to Governing Enterprise pawn shops causing business activities conducted by the above parties are not yet regulated. The condition is feared could cause harm to the consumer society. The purpose of this research is to know the procedures, mechanisms, protection of goods and guarantee the consumer on an informal pledge financing, methods of determination of the cost of maintenance of the goods and the goods of the execution mechanism of the pledge as well as protection for the collateral items are viewed from the side of the consumer by looking at laws-invitations and Sharia. To find out whether the pledge have gotten permission from OJK. This research uses qualitative research methods with the study of library research, field data and simulations. The approach used in this study is the empirical juridical approach. Elaboration upon the results is discussed further in this article.

Download Full-text

The Awareness Level of the Safety and Health of the Operational Level

ADVANCES IN BUSINESS RESEARCH INTERNATIONAL JOURNAL ◽

10.24191/abrij.v3i1.10036 ◽

2017 ◽

Vol 3 (1) ◽

pp. 42

Author(s):

Roshanira Che Mohd Noor ◽

Nur Atiqah Rochin Demong

Keyword(s):

Health And Safety ◽

Health Conditions ◽

Effective Strategies ◽

Operational Level ◽

Safety And Health ◽

Health Factors ◽

The Cost ◽

The Relationship ◽

Awareness Level

Providing a safe and healthy workplace is one of the most effective strategies in for holding down the cost of doing construction business. It was a part of the overall management system to facilitate themanagement of the occupational health and safety risk that are associated with the business of the organization. Factors affected the awareness level inclusive of safety and health conditions, dangerous working area, long wait care and services and lack of emergency communication werethe contributed factors to the awareness level for the operational level. Total of 122 incidents happened at Telekom Malaysia Berhad as compared to year 2015 only 86 cases. Thus, the main objective of this study was to determine the relationship between safety and health factors and the awareness level among operational workers.The determination of this research was to increase the awareness level among the operational level workerswho committing to safety and health environment.

Download Full-text

Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane

10.3403/30094843 ◽

2011 ◽

Keyword(s):

Sound Pressure ◽

Energy Levels ◽

Free Field ◽

Sound Power ◽

Noise Sources ◽

Sound Energy

Download Full-text

ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI DAN PENENTUAN HARGA JUAL ATAS PRODUK (Studi Kasus Pada PT Dasa Windu Agung)

Jurnal Riset Manajemen dan Bisnis (JRMB) Fakultas Ekonomi UNIAT ◽

10.36226/jrmb.v1i2.23 ◽

2016 ◽

Vol 1 (2) ◽

pp. 183-190

Author(s):

Dwi Urip Wardoyo

Keyword(s):

Manufacturing Industry ◽

Sampling Method ◽

Manufacturing Companies ◽

Test Analysis ◽

Automotive Components ◽

Convenience Sampling ◽

Cost Of Production ◽

The Cost ◽

Keywords Cost

This study aims to determine the determination of the cost of production for products produced by PT. DWA. The Company is engaged in the manufacturing industry specialized in automotive components. Its activity is carried out through a series of production processes, so that expenses spent in the production will be calculated into the cost of the production sold. The population in this study were all manufacturing companies in Jakarta. Convenience sampling method selected one of the companies that get the confidence to assemble three national car project in Indonesia, namely Timor, Bakrie and Maleo. Test analysis used in this study is to test the calculation of full costing with job order costing. This study shows that (a) determination of the cost elements associated with the cost of production and (b) determining the cost of production on a product-based job costing with full costing approach. Keywords: cost of production, full costing

Download Full-text

Determination of the minimum number of technological bases of a part

10.36652/0042-4633-2020-9-73-75 ◽

2020 ◽

pp. 73-75

Author(s):

B.M. Bazrov ◽

T.M. Gaynutdinov

Keyword(s):

Cost Price ◽

Labor Input ◽

Part Surface ◽

Technological Base ◽

Size Accuracy ◽

Minimum Number ◽

The Cost ◽

Input Cost ◽

Selection Of

The selection of technological bases is considered before the choice of the type of billet and the development of the route of the technological process. A technique is proposed for selecting the minimum number of sets of technological bases according to the criterion of equality in the cost price of manufacturing the part according to the principle of unity and combination of bases at this stage. Keywords: part, surface, coordinating size, accuracy, design and technological base, labor input, cost price. [email protected]

Download Full-text