scholarly journals Techno-Economic Assessment and Operational Planning of Wind-Battery Distributed Renewable Generation System

2021 ◽  
Vol 13 (12) ◽  
pp. 6776
Author(s):  
Umar Salman ◽  
Khalid Khan ◽  
Fahad Alismail ◽  
Muhammad Khalid
Keyword(s):  
Energy Storage ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Economic Assessment ◽  
Electrical Energy ◽  
Energy Storage System ◽  
Optimal Operation ◽  
Power Demand ◽  
Varying Demand ◽  
Operation Cost

Electrical energy and power demand will experience exponential increase with the rise of the global population. Power demand is predictable and can be estimated based on population and available historical data. However, renewable energy sources (RES) are intermittent, unpredictable, and environment-dependent. Interestingly, microgrids are becoming smarter but require adequate and an appropriate energy storage system (ESS) to support their smooth and optimal operation. The deep discharge caused by the charging–discharging operation of the ESS affects its state of health, depth of discharge (DOD), and life cycle, and inadvertently reduces its lifetime. Additionally, these parameters of the ESS are directly affected by the varying demand and intermittency of RES. This study presents an assessment of battery energy storage in wind-penetrated microgrids considering the DOD of the ESS. The study investigates two scenarios: a standalone microgrid, and a grid-connected microgrid. The problem is formulated based on the operation cost of the microgrid considering the DOD and the lifetime of the battery. The optimization problem is solved using non-linear programming. The scheduled operation cost of the microgrid, the daily scheduling cost of ESS, the power dispatch by distributed generators, and the DOD of the battery storage at any point in time are reported. Performance analysis showed that a power loss probability of less than 10% is achievable in all scenarios, demonstrating the effectiveness of the study.

A Novel Energy Storage System Based on Carbon Dioxide Unique Thermodynamic Properties

2021 ◽  
Author(s):  
Marco Astolfi ◽  
Dario Rizzi ◽  
Ennio Macchi ◽  
Claudio Spadacini
Keyword(s):  
Carbon Dioxide ◽  
Energy Storage ◽  
Capital Investment ◽  
High Performance ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Economic Assessment ◽  
Electrical Energy ◽  
Working Fluid ◽  
Reference Case

Abstract This paper focuses on the thermodynamic performance and techno-economic assessment of a novel electrical energy storage technology using carbon dioxide as working fluid. This technology, named CO2 battery and recently patented by Energy Dome SpA., addresses to an energy market which has great need of energy storage solutions able to handle the increasing share of non-dispatchable renewable energy sources like photovoltaic and wind energy. After a brief introduction, the present study presents the concept of CO2 batteries and their operation. Then the detailed numerical model developed for the accurate calculation of system round trip efficiency is presented with the adopted assumptions and the optimization routine description. Results on the reference case and following sensitivity analysis confirm a RTE of around 77% (±2%) which makes CO2 batteries a very promising technology with respect to other energy storage systems based on thermodynamic cycles like compressed air and liquid air energy storage thanks to the high performance and the easiness of installation. Finally, calculation of system footprint, capital investment cost and levelized cost of storage are discussed.

scholarly journals Implementation of Optimal Two-Stage Scheduling of Energy Storage System Based on Big-Data-Driven Forecasting—An Actual Case Study in a Campus Microgrid

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1124 ◽  
Author(s):  
Byeong-Cheol Jeong ◽  
Dong-Hwan Shin ◽  
Jae-Beom Im ◽  
Jae-Young Park ◽  
Young-Jin Kim
Keyword(s):  
Energy Storage ◽  
Scheduling Algorithm ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Operating Cost ◽  
Optimal Schedule ◽  
Energy Storage System ◽  
Optimal Operation ◽  
Mixed Integer ◽  
Actual Case

Optimal operation scheduling of energy storage systems (ESSs) has been considered as an effective way to cope with uncertainties arising in modern grid operation such as the inherent intermittency of the renewable energy sources (RESs) and load variations. This paper proposes a scheduling algorithm where ESS power inputs are optimally determined to minimize the microgrid (MG) operation cost. The proposed algorithm consists of two stages. In the first stage, hourly schedules during a day are optimized one day in advance with the objective of minimizing the operating cost. In the second stage, the optimal schedule obtained from the first stage is repeatedly updated every 5 min during the day of operation to compensate for the uncertainties in load demand and RES output power. The ESS model is developed considering operating efficiencies and then incorporated in mixed integer linear programming (MILP). Penalty functions are also considered to acquire feasible optimal solutions even under large forecasting errors in RES generation and load variation. The proposed algorithm is verified in a campus MG, implemented using ESSs and photovoltaic (PV) arrays. The field test results are obtained using open-source software and then compared with those acquired using commercial software.

Modeling an Energy Storage System Based on a Hybrid Renewable Energy System in Stand-alone Applications

2017 ◽  
Vol 68 (11) ◽  
pp. 2641-2645
Author(s):  
Alexandru Ciocan ◽  
Ovidiu Mihai Balan ◽  
Mihaela Ramona Buga ◽  
Tudor Prisecaru ◽  
Mohand Tazerout
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Hybrid Renewable Energy System

The current paper presents an energy storage system that stores the excessive energy, provided by a hybrid system of renewable energy sources, in the form of compressed air and thermal heat. Using energy storage systems together with renewable energy sources represents a major challenge that could ensure the transition to a viable economic future and a decarbonized economy. Thermodynamic calculations are conducted to investigate the performance of such systems by using Matlab simulation tools. The results indicate the values of primary and global efficiencies for various operating scenarios for the energy storage systems which use compressed air as medium storage, and shows that these could be very effective systems, proving the possibility to supply to the final user three types of energy: electricity, heat and cold function of his needs.

scholarly journals Optimal Placement and Sizing of an Energy Storage System Using a Power Sensitivity Analysis in a Practical Stand-Alone Microgrid

Electronics ◽  
2021 ◽  
Vol 10 (13) ◽  
pp. 1598
Author(s):  
Dongmin Kim ◽  
Kipo Yoon ◽  
Soo Hyoung Lee ◽  
Jung-Wook Park
Keyword(s):  
Sensitivity Analysis ◽  
Energy Storage ◽  
Power System ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Optimization Techniques ◽  
Optimal Placement ◽  
Stable Operation ◽  
Analytical Approaches

The energy storage system (ESS) is developing into a very important element for the stable operation of power systems. An ESS is characterized by rapid control, free charging, and discharging. Because of these characteristics, it can efficiently respond to sudden events that affect the power system and can help to resolve congested lines caused by the excessive output of distributed generators (DGs) using renewable energy sources (RESs). In order to efficiently and economically install new ESSs in the power system, the following two factors must be considered: the optimal installation placements and the optimal sizes of ESSs. Many studies have explored the optimal installation placement and the sizing of ESSs by using analytical approaches, mathematical optimization techniques, and artificial intelligence. This paper presents an algorithm to determine the optimal installation placement and sizing of ESSs for a virtual multi-slack (VMS) operation based on a power sensitivity analysis in a stand-alone microgrid. Through the proposed algorithm, the optimal installation placement can be determined by a simple calculation based on a power sensitivity matrix, and the optimal sizing of the ESS for the determined placement can be obtained at the same time. The algorithm is verified through several case studies in a stand-alone microgrid based on practical power system data. The results of the proposed algorithm show that installing ESSs in the optimal placement could improve the voltage stability of the microgrid. The sizing of the newly installed ESS was also properly determined.

scholarly journals Battery Storage-Based Frequency Containment Reserves in Large Wind Penetrated Scenarios: A Practical Approach to Sizing

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3065 ◽  
Author(s):  
Monika Sandelic ◽  
Daniel-Ioan Stroe ◽  
Florin Iov
Keyword(s):  
Energy Storage ◽  
Wind Power ◽  
Power Plants ◽  
Storage System ◽  
Economic Assessment ◽  
Energy Storage System ◽  
Battery Energy Storage System ◽  
Battery Energy Storage ◽  
Battery Energy ◽  
Large Wind

This paper focuses on the sizing of a battery energy storage system providing frequency containment reserves in a power system with a large wind power penetration level. A three-stage sizing methodology including the different aspect of battery energy storage system performance is proposed. The first stage includes time-domain simulations, investigating battery energy storage system dynamic response and its capability of providing frequency reserves. The second stage involves lifetime investigation. An economic assessment of the battery unit is carried out by performing the last stage. The main outcome of the proposed methodology is to choose the suitable battery energy storage system size for providing frequency containment reserve from augmented wind power plants while fulfilling relevant evaluation criteria imposed for each stage.

scholarly journals The cost-effectiveness of an energy storage system using hydrogen and underground gas storage

2019 ◽  
Vol 137 ◽  
pp. 01007 ◽  
Author(s):  
Sebastian Lepszy
Keyword(s):  
Cost Effectiveness ◽  
Energy Storage ◽  
Historical Data ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Electricity Production ◽  
Energy Market ◽  
The Cost ◽  
Random Nature

Due to the random nature of the production, the use of renewable energy sources requires the use of technologies that allow adjustment of electricity production to demand. One of the ways that enable this task is the use of energy storage systems. The article focuses on the analysis of the cost-effectiveness of energy storage from the grid. In particular, the technology was evaluated using underground hydrogen storage generated in electrolysers. Economic analyzes use historical data from the Polish energy market. The obtained results illustrate, among other things, the proportions between the main technology modules selected optimally in technical and economic terms.

scholarly journals Adequacy Assessment of Wind Integrated Generating Systems Incorporating Demand Response and Battery Energy Storage System

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2649 ◽  
Author(s):  
Jiashen Teh
Keyword(s):  
Energy Storage ◽  
Demand Response ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Peak Load ◽  
Energy Storage System ◽  
Battery Energy Storage System ◽  
Battery Energy Storage ◽  
Battery Energy ◽  
Generating System

The demand response and battery energy storage system (BESS) will play a key role in the future of low carbon networks, coupled with new developments of battery technology driven mainly by the integration of renewable energy sources. However, studies that investigate the impacts of BESS and its demand response on the adequacy of a power supply are lacking. Thus, a need exists to address this important gap. Hence, this paper investigates the adequacy of a generating system that is highly integrated with wind power in meeting load demand. In adequacy studies, the impacts of demand response and battery energy storage system are considered. The demand response program is applied using the peak clipping and valley filling techniques at various percentages of the peak load. Three practical strategies of the BESS operation model are described in this paper, and all their impacts on the adequacy of the generating system are evaluated. The reliability impacts of various wind penetration levels on the generating system are also explored. Finally, different charging and discharging rates and capacities of the BESS are considered when evaluating their impacts on the adequacy of the generating system.

Sign in / Sign up

Export Citation Format

Share Document