scholarly journals VASMA Weighting: Survey-Based Criteria Weighting Methodology that Combines ENTROPY and WASPAS-SVNS to Reflect the Psychometric Features of the VAS Scales

Symmetry ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 1641
Author(s):  
Ingrida Lescauskiene ◽  
Romualdas Bausys ◽  
Edmundas Kazimieras Zavadskas ◽  
Birute Juodagalviene
Keyword(s):  
Multicriteria Decision Making ◽  
Preference Elicitation ◽  
Ease Of Use ◽  
The Novel ◽  
Practical Application ◽  
The Matrix ◽  
Criteria Weights ◽  
Analogue Scales ◽  
Theoretical Foundations

Data symmetry and asymmetry might cause difficulties in various areas including criteria weighting approaches. Preference elicitation is an integral part of the multicriteria decision-making process. Weighting approaches differ in terms of accuracy, ease of use, complexity, and theoretical foundations. When the opinions of the wider audience are needed, electronic surveys with the matrix questions consisting of the visual analogue scales (VAS) might be employed as the easily understandable data collection tool. The novel criteria weighting technique VASMA weighting (VAS Matrix for the criteria weighting) is presented in this paper. It respects the psychometric features of the VAS scales and analyzes the uncertainties caused by the survey-based preference elicitation. VASMA weighting integrates WASPAS-SVNS for the determination of the subjective weights and Shannon entropy for the calculation of the objective weights. Numerical example analyzing the importance of the criteria that affect parents’ decisions regarding the choice of the kindergarten institution was performed as the practical application. Comparison of the VASMA weighting and the direct rating (DR) methodologies was done. It revealed that VASMA weighting is able to overcome the main disadvantages of the DR technique—the high biases of the collected data and the low variation of the criteria weights.

scholarly journals New UHPLC-QqQ-MS/MS Method for the Rapid and Sensitive Analysis of Ascorbic and Dehydroascorbic Acids in Plant Foods

Molecules ◽  
2019 ◽  
Vol 24 (8) ◽  
pp. 1632 ◽  
Author(s):  
Nieves Baenas ◽  
Francisco J. Salar ◽  
Raúl Domínguez-Perles ◽  
Cristina García-Viguera
Keyword(s):  
Matrix Effect ◽  
High Performance ◽  
High Selectivity ◽  
Dehydroascorbic Acid ◽  
High Sensitivity ◽  
Practical Application ◽  
Quadrupole Mass ◽  
Internal Standards ◽  
The Matrix

A new method using ultra high-performance liquid chromatography coupled with triple quadrupole mass spectrometry (UHPLC-QqQ-MS/MS) methodology was developed for the determination of ascorbic acid (AA) and dehydroascorbic acid (DHAA) contents in liquid and solid vegetable samples. The advantages of this method are speed, high sensitivity and practical application. In accordance with these advantages, the present method allows the simultaneous determination of AA and DHAA without previous reduction/derivatization of DHAA and without the use of internal standards in the samples. This is of high interest in routine analysis, providing a simpler sample preparation, as well as enhanced accuracy and robustness. Its validation included selectivity, sensitivity and linearity, precision and accuracy, matrix effect, and recovery. The results showed high selectivity and sensitivity, with calibration curves ranging from 10 to 500 ng mL−1 and from 50 to 500 ng mL−1 for AA and DHAA, respectively. Appropriate dilutions for each sample are necessary to avoid the matrix effect with accepted recoveries.

Lateral resolution of the electron microbeam analysis

1978 ◽  
Vol 36 (1) ◽  
pp. 542-543
Author(s):  
H.J. Dudek
Keyword(s):  
Quantitative Analysis ◽  
Depth Resolution ◽  
Lateral Resolution ◽  
Cylindrical Particle ◽  
Correction Procedure ◽  
X Ray ◽  
Element Concentrations ◽  
Microbeam Analysis ◽  
The Matrix

The chemical inhomogenities in modern materials such as fibers, phases and inclusions, often have diameters in the region of one micrometer. Using electron microbeam analysis for the determination of the element concentrations one has to know the smallest possible diameter of such regions for a given accuracy of the quantitative analysis.In th is paper the correction procedure for the quantitative electron microbeam analysis is extended to a spacial problem to determine the smallest possible measurements of a cylindrical particle P of high D (depth resolution) and diameter L (lateral resolution) embeded in a matrix M and which has to be analysed quantitative with the accuracy q. The mathematical accounts lead to the following form of the characteristic x-ray intens ity of the element i of a particle P embeded in the matrix M in relation to the intensity of a standard S

Determination of the phase structure of polymerblends by electron microscopy

1978 ◽  
Vol 36 (1) ◽  
pp. 492-493
Author(s):  
Dr. G. Kaemof
Keyword(s):  
Screw Extruder ◽  
Electron Microscopic ◽  
Thin Sections ◽  
Single Screw Extruder ◽  
Transmission Electron ◽  
The Matrix ◽  
Twin Screw ◽  
Special Case ◽  
Microscopic Investigations

A mixture of polycarbonate (PC) and styrene-acrylonitrile-copolymer (SAN) represents a very good example for the efficiency of electron microscopic investigations concerning the determination of optimum production procedures for high grade product properties.The following parameters have been varied:components of charge (PC : SAN 50 : 50, 60 : 40, 70 : 30), kind of compounding machine (single screw extruder, twin screw extruder, discontinuous kneader), mass-temperature (lowest and highest possible temperature).The transmission electron microscopic investigations (TEM) were carried out on ultra thin sections, the PC-phase of which was selectively etched by triethylamine.The phase transition (matrix to disperse phase) does not occur - as might be expected - at a PC to SAN ratio of 50 : 50, but at a ratio of 65 : 35. Our results show that the matrix is preferably formed by the components with the lower melting viscosity (in this special case SAN), even at concentrations of less than 50 %.

Polishing process effect on the image of dispersed precipitates

1984 ◽  
Vol 42 ◽  
pp. 534-535
Author(s):  
C.T. Hu ◽  
C.W. Allen
Keyword(s):  
Matrix Material ◽  
Specimen Preparation ◽  
Second Phase ◽  
Precipitate Particle ◽  
Polishing Process ◽  
Second Phase Particles ◽  
The Matrix ◽  
Surface Profiles ◽  
Thinning Process

One important problem in determination of precipitate particle size is the effect of preferential thinning during TEM specimen preparation. Figure 1a schematically represents the original polydispersed Ni3Al precipitates in the Ni rich matrix. The three possible type surface profiles of TEM specimens, which result after electrolytic thinning process are illustrated in Figure 1b. c. & d. These various surface profiles could be produced by using different polishing electrolytes and conditions (i.e. temperature and electric current). The matrix-preferential-etching process causes the matrix material to be attacked much more rapidly than the second phase particles. Figure 1b indicated the result. The nonpreferential and precipitate-preferential-etching results are shown in Figures 1c and 1d respectively.

A novel method for the determination of linting propensity of paper

TAPPI Journal ◽  
2012 ◽  
Vol 11 (10) ◽  
pp. 9-17
Author(s):  
ALESSANDRA GERLI ◽  
LEENDERT C. EIGENBROOD
Keyword(s):  
Ash Content ◽  
The Novel ◽  
Offset Printing ◽  
Excellent Correlation ◽  
End Conditions ◽  
Bottom Side ◽  
Novel Method ◽  
Total Fraction

A novel method was developed for the determination of linting propensity of paper based on printing with an IGT printability tester and image analysis of the printed strips. On average, the total fraction of the surface removed as lint during printing is 0.01%-0.1%. This value is lower than those reported in most laboratory printing tests, and more representative of commercial offset printing applications. Newsprint paper produced on a roll/blade former machine was evaluated for linting propensity using the novel method and also printed on a commercial coldset offset press. Laboratory and commercial printing results matched well, showing that linting was higher for the bottom side of paper than for the top side, and that linting could be reduced on both sides by application of a dry-strength additive. In a second case study, varying wet-end conditions were used on a hybrid former machine to produce four paper reels, with the goal of matching the low linting propensity of the paper produced on a machine with gap former configuration. We found that the retention program, by improving fiber fines retention, substantially reduced the linting propensity of the paper produced on the hybrid former machine. The papers were also printed on a commercial coldset offset press. An excellent correlation was found between the total lint area removed from the bottom side of the paper samples during laboratory printing and lint collected on halftone areas of the first upper printing unit after 45000 copies. Finally, the method was applied to determine the linting propensity of highly filled supercalendered paper produced on a hybrid former machine. In this case, the linting propensity of the bottom side of paper correlated with its ash content.

Practical Application

2018 ◽  
Author(s):  
Kubo Mačák
Keyword(s):  
Armed Conflict ◽  
Armed Conflicts ◽  
Practical Application ◽  
Temporal Perspective ◽  
Applicable Law ◽  
The Law ◽  
Geographical Scope

This chapter analyses the practical application of the law of belligerent occupation in internationalized armed conflicts in its temporal, geographical, and personal dimensions. Firstly, from a temporal perspective, the law is shown to apply once one of the conflict parties consolidates its control over the enemy territory and substitutes its own authority for that of the displaced enemy. Secondly, the chapter assesses the geographical scope of the applicable law and draws specific guidelines for the determination of the territory subject to the law of occupation in various types of internationalized armed conflicts. Thirdly, the chapter endorses the allegiance-based approach to the designation of protected persons under the law of occupation and applies it to the reality of internationalized armed conflict. Overall, the chapter presents a workable toolkit for the application of the law of occupation to internationalized armed conflicts.

scholarly journals A New Grey Approach for Using SWARA and PIPRECIA Methods in a Group Decision-Making Environment

Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1554
Author(s):  
Dragiša Stanujkić ◽  
Darjan Karabašević ◽  
Gabrijela Popović ◽  
Predrag S. Stanimirović ◽  
Muzafer Saračević ◽  
...  
Keyword(s):  
Decision Making ◽  
Group Decision Making ◽  
Group Decision ◽  
Multiple Criteria Decision Making ◽  
Grey System Theory ◽  
Multiple Criteria ◽  
Decision Making Process ◽  
Grey System ◽  
Criteria Weights

The environment in which the decision-making process takes place is often characterized by uncertainty and vagueness and, because of that, sometimes it is very hard to express the criteria weights with crisp numbers. Therefore, the application of the Grey System Theory, i.e., grey numbers, in this case, is very convenient when it comes to determination of the criteria weights with partially known information. Besides, the criteria weights have a significant role in the multiple criteria decision-making process. Many ordinary multiple criteria decision-making methods are adapted for using grey numbers, and this is the case in this article as well. A new grey extension of the certain multiple criteria decision-making methods for the determination of the criteria weights is proposed. Therefore, the article aims to propose a new extension of the Step-wise Weight Assessment Ratio Analysis (SWARA) and PIvot Pairwise Relative Criteria Importance Assessment (PIPRECIA) methods adapted for group decision-making. In the proposed approach, attitudes of decision-makers are transformed into grey group attitudes, which allows taking advantage of the benefit that grey numbers provide over crisp numbers. The main advantage of the proposed approach in relation to the use of crisp numbers is the ability to conduct different analyses, i.e., considering different scenarios, such as pessimistic, optimistic, and so on. By varying the value of the whitening coefficient, different weights of the criteria can be obtained, and it should be emphasized that this approach gives the same weights as in the case of crisp numbers when the whitening coefficient has a value of 0.5. In addition, in this approach, the grey number was formed based on the median value of collected responses because it better maintains the deviation from the normal distribution of the collected responses. The application of the proposed approach was considered through two numerical illustrations, based on which appropriate conclusions were drawn.

scholarly journals Determination of Objective Weights Using a New Method Based on the Removal Effects of Criteria (MEREC)

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 525 ◽  
Author(s):  
Mehdi Keshavarz-Ghorabaee ◽  
Maghsoud Amiri ◽  
Edmundas Kazimieras Zavadskas ◽  
Zenonas Turskis ◽  
Jurgita Antucheviciene
Keyword(s):  
Essential Elements ◽  
New Method ◽  
Multi Criteria Decision Making ◽  
Analysis Of Means ◽  
Simulation Based ◽  
Criteria Weights ◽  
The Stability ◽  
Computational Analyses ◽  
Weighting Methods

The weights of criteria in multi-criteria decision-making (MCDM) problems are essential elements that can significantly affect the results. Accordingly, researchers developed and presented several methods to determine criteria weights. Weighting methods could be objective, subjective, and integrated. This study introduces a new method, called MEREC (MEthod based on the Removal Effects of Criteria), to determine criteria’ objective weights. This method uses a novel idea for weighting criteria. After systematically introducing the method, we present some computational analyses to confirm the efficiency of the MEREC. Firstly, an illustrative example demonstrates the procedure of the MEREC for calculation of the weights of criteria. Secondly, a comparative analysis is presented through an example for validation of the introduced method’s results. Additionally, we perform a simulation-based analysis to verify the reliability of MEREC and the stability of its results. The data of the MCDM problems generated for making this analysis follow a prevalent symmetric distribution (normal distribution). We compare the results of the MEREC with some other objective weighting methods in this analysis, and the analysis of means (ANOM) for variances shows the stability of its results. The conducted analyses demonstrate that the MEREC is efficient to determine objective weights of criteria.

scholarly journals Sustainability in the Business Sector: A Fuzzy Multicriteria Decision-Making Model for Financial Leasing Company Selection of the Vietnamese SMEs

SAGE Open ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 215824402110360
Author(s):  
Fengsheng Chien ◽  
Chia-Nan Wang ◽  
Ka Yin Chau ◽  
Van Thanh Nguyen ◽  
Viet Tinh Nguyen
Keyword(s):  
Decision Making ◽  
Interest Rates ◽  
Small And Medium Enterprises ◽  
Multicriteria Decision Making ◽  
Primary Concern ◽  
Multicriteria Decision ◽  
Financial Leasing ◽  
Criteria Weights ◽  
Leasing Company ◽  
Selection Of

The uses and management of capital is extremely important to the operation of any businesses. However, not all businesses have available capital, so the use of loans in many different forms is always an effective solution in managing corporate finance. Accompanying with businesses, many financial leasing companies have implemented products and programs to lend money to businesses with low interest rates. So, choosing the best financial leasing company is a primary concern of businesses. To increase competitiveness, financial leasing companies often offer preferential conditions to attract businesses. Choosing the best financial leasing service to leasing is important and necessary to those businesses. Thus, the selection of a financial leasing company by small and medium enterprises benefits from the application of Multicriteria Decision-Making (MCDM) methods which allows the decision maker to consider various qualitative and quantitative criteria. In this article, the author applied Fuzzy Analytical Network Process (FANP) to calculate the related criteria weights of the financial leasing company selection problem of businesses. Then, the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) is applied to rank the potential decision-making units. This research establishes one complete and efficient model for financial leasing company selection using FANP and TOPSIS methods. The proposed model is then applied into a real-world case study to demonstrate its feasibility.

Sign in / Sign up

Export Citation Format

Share Document