scholarly journals Optimization-Based Water-Salt Dynamic Threshold Analysis of Cotton Root Zone in Arid Areas

Water ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2449
Author(s):  
Hui Wu ◽  
Shaozhong Kang ◽  
Xiaojuan Li ◽  
Ping Guo ◽  
Shunjun Hu
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Root Zone ◽  
Growth Stages ◽  
Cotton Yield ◽  
Threshold Levels ◽  
Initial Soil ◽  
Different Growth Stages

Threshold levels of soil moisture and salinity in the plant root zone can guide crop planting and farming practices by providing a baseline for adjusting irrigation and modifying soil salinity. This study describes a method of soil water and salinity control based on an optimized model for growing cotton in an arid area. Experiments were conducted in Akesu Irrigation District, southern Xinjiang, northwest China, to provide data for cotton yield and soil water content and salinity in the root zone at different growth stages. The sensitivity of cotton to soil water content and salinity was predicted for different growth periods using a modified Jensen model. An optimization model with 480 boundary conditions was created, with the objective of maximizing yield, to obtain the dynamically varying water and salt threshold levels in the root zone for scenarios that included three initial soil moisture content values (W0), eight irrigation quantities (M), five initial soil salt content values (S0), and four irrigation water salinity levels (K). Results showed that the flowering–boll stage is the crucial period for cotton yield, and the threshold levels of soil water content and salinity in the cotton root zone varied with the boundary conditions. The scenario chosen for the research area in this study was W0 = 0.85θfc (θfc is field capacity), S0 = 4 g kg−1, M = 400 mm, K = 0 g L−1. The predicted threshold levels of soil water for different growth stages (seedling, bud, flowering–boll, and boll-opening) were respectively 0.75–0.85θfc, 0.65–0.75θfc, 0.56–0.65θfc, and 0.45–0.56θfc. Corresponding threshold levels of salt were 4–4.16, 4.16–4.39, 4.39–4.64, and 4.64–4.97 g kg−1 when no action was taken to remove salt from the root zone. This study provides an innovation method for the determination of dynamically varying soil water content and salt thresholds.

Soil Water Measurement as Basis to Optimize Irrigation Scheduling: A Review

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 553f-554
Author(s):  
A.K. Alva ◽  
A. Fares
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Real Time ◽  
Soil Water Content ◽  
Root Zone ◽  
Soil Water Potential ◽  
Irrigation Scheduling ◽  
Rooting Depth ◽  
The Impact

Supplemental irrigation is often necessary for high economic returns for most cropping conditions even in humid areas. As irrigation costs continue to increase more efforts should be exerted to minimize these costs. Real time estimation and/or measurement of available soil water content in the crop root zone is one of the several methods used to help growers in making the right decision regarding timing and quantity of irrigation. The gravimetric method of soil water content determination is laborious and doesn't suite for frequent sampling from the same location because it requires destructive soil sampling. Tensiometers, which measure soil water potential that can be converted into soil water content using soil moisture release curves, have been used for irrigation scheduling. However, in extreme sandy soils the working interval of tensiometer is reduced, hence it may be difficult to detect small changes in soil moisture content. Capacitance probes which operate on the principle of apparent dielectric constant of the soil-water-air mixture are extremely sensitive to small changes in the soil water content at short time intervals. These probes can be placed at various depths within and below the effective rooting depth for a real time monitoring of the water content. Based on this continuous monitoring of the soil water content, irrigation is scheduled to replenish the water deficit within the rooting depth while leaching below the root zone is minimized. These are important management practices aimed to increase irrigation efficiency, and nutrient uptake efficiency for optimal crop production, while minimizing the impact of agricultural non-point source pollutants on the groundwater quality.

scholarly journals Irrigation Scheduling Using Soil Moisture Sensors

2017 ◽  
Vol 10 (1) ◽  
pp. 1 ◽  
Author(s):  
Ruixiu Sui
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Management Practices ◽  
Root Zone ◽  
Weighted Average ◽  
Irrigation Scheduling ◽  
Time Interval ◽  
Soil Moisture Sensors

Irrigation is required to ensure crop production. Practical methods of use sensors to determine soil water status are needed in irrigation scheduling. Soil moisture sensors were evaluated and used for irrigation scheduling in humid region of the Mid-South US. Soil moisture sensors were installed in soil at depths of 15 cm, 30 cm, and 61 cm belowground. Soil volumetric water content was automatically measured by the sensors in a time interval of an hour during the crop growing season. Soil moisture data were wirelessly transferred onto internet through a wireless sensor network (WSN) so that the data could be remotely accessed online. Soil water content measured at the three depths were interpreted using a weighted average method to reflect the status of soil water in plant root zone. A threshold to trigger an irrigation event was determined with sensor-measured soil water content. An antenna mounting device was developed for operation of the WSN. Using the antenna mounting device, the soil moisture measurement was not be interrupted by crop field management practices.

scholarly journals Study on Runoff and Infiltration for Expansive Soil Slopes in Simulated Rainfall

Water ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 222
Author(s):  
Wenkai Lei ◽  
Hongyuan Dong ◽  
Pan Chen ◽  
Haibo Lv ◽  
Liyun Fan ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Soil Moisture Content ◽  
Expansive Soil ◽  
Slope Gradient ◽  
Initial Soil Moisture ◽  
Initial Soil

In order to understand the hydrological process of expansive soil slopes, simulated rainfall experiments were conducted to study the effects of slope gradient and initial soil moisture content on runoff and infiltration for expansive soil slopes located in south China. The field program consisted of four neighboring slopes (70%, 47%, 32%, and 21%) instrumented by a runoff collection system and moisture content sensors (EC-5). Results from the monitored tests indicate that there was delay in the response of surface runoff. The runoff initiation time decreased with initial soil water content and increasing slope gradient. After the generation of runoff, the cumulative runoff per unit area and the runoff rate increased linearly and logarithmically with time, respectively. The greater the initial soil moisture content was, the smaller the influence of slope gradient on runoff. A rainfall may contribute from 39% to about 100% of its total rainfall as infiltration, indicating that infiltration remained an important component of the rainwater falling on the slope, despite the high initial soil water content. The larger the initial sealing degree of slope surface was the smaller the cumulative infiltration per unit area of the slope. However, the soil moisture reaction was more obvious. The influence of inclination is no longer discernible at high initial moisture levels. The greater the initial soil moisture content and the smaller the slope gradient, the weaker was the change of soil water content caused by simulated rainfall. The influence of initial soil moisture content and slope gradient on the processes of flow and changes of soil water content identified in this study may be helpful in the surface water control for expansive soil slopes.

scholarly journals Spatio-temporal soil moisture retrieval at the catchment scale using a dense network of cosmic-ray neutron sensors

2021 ◽  
Vol 25 (9) ◽  
pp. 4807-4824
Author(s):  
Maik Heistermann ◽  
Till Francke ◽  
Martin Schrön ◽  
Sascha E. Oswald
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Root Zone ◽  
Cosmic Ray ◽  
Dense Network ◽  
Constrained Interpolation ◽  
Neutron Count ◽  
Spatio Temporal

Abstract. Cosmic-ray neutron sensing (CRNS) is a powerful technique for retrieving representative estimates of soil water content at a horizontal scale of hectometres (the “field scale”) and depths of tens of centimetres (“the root zone”). This study demonstrates the potential of the CRNS technique to obtain spatio-temporal patterns of soil moisture beyond the integrated volume from isolated CRNS footprints. We use data from an observational campaign carried out between May and July 2019 that featured a dense network of more than 20 neutron detectors with partly overlapping footprints in an area that exhibits pronounced soil moisture gradients within one square kilometre. The present study is the first to combine these observations in order to represent the heterogeneity of soil water content at the sub-footprint scale as well as between the CRNS stations. First, we apply a state-of-the-art procedure to correct the observed neutron count rates for static effects (heterogeneity in space, e.g. soil organic matter) and dynamic effects (heterogeneity in time, e.g. barometric pressure). Based on the homogenized neutron data, we investigate the robustness of a calibration approach that uses a single calibration parameter across all CRNS stations. Finally, we benchmark two different interpolation techniques for obtaining spatio-temporal representations of soil moisture: first, ordinary Kriging with a fixed range; second, spatial interpolation complemented by geophysical inversion (“constrained interpolation”). To that end, we optimize the parameters of a geostatistical interpolation model so that the error in the forward-simulated neutron count rates is minimized, and suggest a heuristic forward operator to make the optimization problem computationally feasible. Comparison with independent measurements from a cluster of soil moisture sensors (SoilNet) shows that the constrained interpolation approach is superior for representing horizontal soil moisture gradients at the hectometre scale. The study demonstrates how a CRNS network can be used to generate coherent, consistent, and continuous soil moisture patterns that could be used to validate hydrological models or remote sensing products.

scholarly journals Modelling the Impact on Root Water Uptake and Solute Return Flow of Different Drip Irrigation Regimes with Brackish Water

Water ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 425 ◽  
Author(s):  
Fairouz Slama ◽  
Nessrine Zemni ◽  
Fethi Bouksila ◽  
Roberto De Mascellis ◽  
Rachida Bouhlila
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Water Uptake ◽  
Brackish Water ◽  
Deficit Irrigation ◽  
Root Zone ◽  
Root Water Uptake ◽  
Return Flows ◽  
Semi Arid

Water scarcity and quality degradation represent real threats to economic, social, and environmental development of arid and semi-arid regions. Drip irrigation associated to Deficit Irrigation (DI) has been investigated as a water saving technique. Yet its environmental impacts on soil and groundwater need to be gone into in depth especially when using brackish irrigation water. Soil water content and salinity were monitored in a fully drip irrigated potato plot with brackish water (4.45 dSm−1) in semi-arid Tunisia. The HYDRUS-1D model was used to investigate the effects of different irrigation regimes (deficit irrigation (T1R, 70% ETc), full irrigation (T2R, 100% ETc), and farmer’s schedule (T3R, 237% ETc) on root water uptake, root zone salinity, and solute return flows to groundwater. The simulated values of soil water content (θ) and electrical conductivity of soil solution (ECsw) were in good agreement with the observation values, as indicated by mean RMSE values (≤0.008 m3·m−3, and ≤0.28 dSm−1 for soil water content and ECsw respectively). The results of the different simulation treatments showed that relative yield accounted for 54%, 70%, and 85.5% of the potential maximal value when both water and solute stress were considered for deficit, full. and farmer’s irrigation, respectively. Root zone salinity was the lowest and root water uptake was the same with and without solute stress for the treatment corresponding to the farmer’s irrigation schedule (273% ETc). Solute return flows reaching the groundwater were the highest for T3R after two subsequent rainfall seasons. Beyond the water efficiency of DI with brackish water, long term studies need to focus on its impact on soil and groundwater salinization risks under changing climate conditions.

scholarly journals A MODEL FOR ESTIMATING ACTUAL EVAPOTRANSPIRATION FROM POTENTIAL EVAPOTRANSPIRATION

1975 ◽  
Vol 6 (3) ◽  
pp. 170-188 ◽  
Author(s):  
K. J. KRISTENSEN ◽  
S. E. JENSEN
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Root Zone ◽  
Potential Evapotranspiration ◽  
Actual Evapotranspiration ◽  
Vegetation Density ◽  
Rainfall Distribution ◽  
Sugar Beets

A model for calculating the daily actual evapotranspiration based on the potential one is presented. The potential evapotranspiration is reduced according to vegetation density, water content in the root zone, and the rainfall distribution. The model is tested by comparing measured (EAm) and calculated (EAc) evapotranspirations from barley, fodder sugar beets, and grass over a four year period. The measured and calculated values agree within 10 %. The model also yields information on soil water content and runoff from the root zone.

The Effect of Dry Pegging Zone Soil on Pod Formation of Florunner Peanut1

1997 ◽  
Vol 24 (1) ◽  
pp. 19-24 ◽  
Author(s):  
P. J. Sexton ◽  
J. M. Bennett ◽  
K. J. Boote
Keyword(s):  
Drought Stress ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Water Deficit ◽  
Growth Rates ◽  
Root Zone ◽  
Soil Water Deficit ◽  
Seed Growth ◽  
Pod Development

Abstract Peanut (Arachis hypogaea L.) fruit growth is sensitive to surface soil (0-5 cm) conditions due to its subterranean fruiting habit. This study was conducted to determine the effect of soil water content in the pegging zone (0-5 cm) on peanut pod growth rate and development. A pegging-pan-root-tube apparatus was used to separately control soil water content in the pegging and root zone for greenhouse trials. A field study also was conducted using portable rainout shelters to create a soil water deficit. Pod phenology, pod and seed growth rates, and final pod and seed dry weights were determined. In greenhouse studies, dry pegging zone soil delayed pod and seed development. In the field, soil water deficits in the pegging and root zone decreased pod and seed growth rates by approximately 30% and decreased weight per seed from 563 to 428 mg. Pegs initiating growth during drought stress demonstrated an ability to suspend development during the period of soil water deficit and to re-initiate pod development after the drought stress was relieved.

scholarly journals Relating surface backscatter response from TRMM Precipitation Radar to soil moisture: results over a semi-arid region

2009 ◽  
Vol 6 (5) ◽  
pp. 6425-6454
Author(s):  
H. Stephen ◽  
S. Ahmad ◽  
T. C. Piechota ◽  
C. Tang
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Arid Regions ◽  
Vegetation Index ◽  
Temporal Trends ◽  
Model Parameters ◽  
Precipitation Radar ◽  
Semi Arid

Abstract. The Tropical Rainfall Measuring Mission (TRMM) carries aboard the Precipitation Radar (TRMMPR) that measures the backscatter (σ°) of the surface. σ° is sensitive to surface soil moisture and vegetation conditions. Due to sparse vegetation in arid and semi-arid regions, TRMMPR σ° primarily depends on the soil water content. In this study we relate TRMMPR σ° measurements to soil water content (ms) in Lower Colorado River Basin (LCRB). σ° dependence on ms is studied for different vegetation greenness values determined through Normalized Difference Vegetation Index (NDVI). A new model of σ° that couples incidence angle, ms, and NDVI is used to derive parameters and retrieve soil water content. The calibration and validation of this model are performed using simulated and measured ms data. Simulated ms is estimated using Variable Infiltration Capacity (VIC) model whereas measured ms is acquired from ground measuring stations in Walnut Gulch Experimental Watershed (WGEW). σ° model is calibrated using VIC and WGEW ms data during 1998 and the calibrated model is used to derive ms during later years. The temporal trends of derived ms are consistent with VIC and WGEW ms data with correlation coefficient (R) of 0.89 and 0.74, respectively. Derived ms is also consistent with the measured precipitation data with R=0.76. The gridded VIC data is used to calibrate the model at each grid point in LCRB and spatial maps of the model parameters are prepared. The model parameters are spatially coherent with the general regional topography in LCRB. TRMMPR σ° derived soil moisture maps during May (dry) and August (wet) 1999 are spatially similar to VIC estimates with correlation 0.67 and 0.76, respectively. This research provides new insights into Ku-band σ° dependence on soil water content in the arid regions.

Root effects on soil water and hydraulic properties

Biologia ◽  
2007 ◽  
Vol 62 (5) ◽  
Author(s):  
Horst Gerke ◽  
Rolf Kuchenbuch
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Water Content ◽  
Bulk Density ◽  
Soil Water ◽  
Soil Water Content ◽  
Hydraulic Properties ◽  
Soil Hydraulic Properties ◽  
Soil Hydraulic ◽  
Root Effects

AbstractPlants can affect soil moisture and the soil hydraulic properties both directly by root water uptake and indirectly by modifying the soil structure. Furthermore, water in plant roots is mostly neglected when studying soil hydraulic properties. In this contribution, we analyze effects of the moisture content inside roots as compared to bulk soil moisture contents and speculate on implications of non-capillary-bound root water for determination of soil moisture and calibration of soil hydraulic properties.In a field crop of maize (Zea mays) of 75 cm row spacing, we sampled the total soil volumes of 0.7 m × 0.4 m and 0.3 m deep plots at the time of tasseling. For each of the 84 soil cubes of 10 cm edge length, root mass and length as well as moisture content and soil bulk density were determined. Roots were separated in 3 size classes for which a mean root porosity of 0.82 was obtained from the relation between root dry mass density and root bulk density using pycnometers. The spatially distributed fractions of root water contents were compared with those of the water in capillary pores of the soil matrix.Water inside roots was mostly below 2–5% of total soil water content; however, locally near the plant rows it was up to 20%. The results suggest that soil moisture in roots should be separately considered. Upon drying, the relation between the soil and root water may change towards water remaining in roots. Relations depend especially on soil water retention properties, growth stages, and root distributions. Gravimetric soil water content measurement could be misleading and TDR probes providing an integrated signal are difficult to interpret. Root effects should be more intensively studied for improved field soil water balance calculations.

Sign in / Sign up

Export Citation Format

Share Document