scholarly journals Application of a Single Porous Basket as a Pier Scour Countermeasure

Water ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3052
Author(s):  
Wei-Lin Lee ◽  
Chih-Wei Lu ◽  
Chin-Kun Huang
Keyword(s):  
Laboratory Tests ◽  
Horseshoe Vortex ◽  
Scour Depth ◽  
Optimal Conditions ◽  
Clear Water ◽  
Pier Scour ◽  
Diameter Hole ◽  
Combined Flow ◽  
Flow Motion ◽  
Scour Countermeasure

This paper presents a study on bridge pier protection with a single porous basket (SPB) in clear-water experiments. The SPB is a type of combined flow-altering countermeasure. The SPB was installed at a distance ahead of the protected pier. After a series of tests, the results showed that appropriate installation of the SPB was able to effectively adjust the flow pattern to reduce the down-flow motion and horseshoe vortex ahead of the pier. Dominant factors for the pier protection—considered for all tests—included the distance between the basket and pier, submerged depth of the basket, basket length, pier diameter, basket diameter, hole size, porosity, and the flow approaching angle. After evaluating these parameters through laboratory tests, the results of protection were optimized. In optimal conditions, the SPB was able to provide maximum pier protection and decrease the maximum scour depth by as much as 75.53%.

Evaluation of Selected Pier-Scour Equations Using Field Data

1996 ◽  
Vol 1523 (1) ◽  
pp. 186-195 ◽  
Author(s):  
Mark N. Landers ◽  
David S. Mueller
Keyword(s):  
Field Measurements ◽  
Bridge Piers ◽  
Critical Ratio ◽  
Scour Depth ◽  
Flow Depth ◽  
Clear Water ◽  
Pier Scour ◽  
Logarithmic Space ◽  
State Highway ◽  
Federal Highway

Field measurements of channel scour at bridges are needed to improve the understanding of scour processes and the ability to accurately predict scour depths. An extensive data base of pier-scour measurements has been developed over the last several years in cooperative studies between state highway departments, the Federal Highway Administration, and the U.S. Geological Survey. Selected scour processes and scour design equations are evaluated using 139 measurements of local scour in live-bed and clear-water conditions. Pier-scour measurements were made at 44 bridges around 90 bridge piers in 12 states. The influence of pier width on scour depth is linear in logarithmic space. The maximum observed ratio of pier width to scour depth is 2.1 for piers aligned to the flow. Flow depth and scour depth were found to have a relation that is linear in logarithmic space and that is not bounded by some critical ratio of flow depth to pier width. Comparisons of computed and observed scour depths indicate that none of the selected equations accurately estimate the depth of scour for all of the measured conditions. Some of the equations performed well as conservative design equations; however, they overpredict many observed scour depths by large amounts. Some equations fit the data well for observed scour depths less than about 3 m (9.8 ft), but significantly underpredict larger observed scour depths.

scholarly journals Optimal Octagonal Hooked Collar Countermeasure to Reduce Scour Around a Single Bridge Pier

2020 ◽  
Author(s):  
Rashid Farooq ◽  
Abdul Razzaq Ghumman ◽  
Muhammad Atiq Ur Rehman Tariq ◽  
Afzal Ahmed ◽  
Khan Zaib Jadoon
Keyword(s):  
Cross Section ◽  
Vital Role ◽  
Bridge Pier ◽  
Scour Depth ◽  
Clear Water ◽  
Action Current ◽  
Pier Scour ◽  
Uniform State ◽  
Scour Hole ◽  
New Equation

Pier modification countermeasures are essential as they play a vital role in protecting pier against local scour action. Current study investigates experimentally the scour around vertical pier of octagonal cross section with pier modification such as newly proposed octagonal hooked collar is explored, in steady uniform state, under clear water condition. The results of pier scour without any modification were used as a reference to compute the efficiency of hooked collar provision around octagonal pier. The results show that by increasing the hooked collar width up to 2.5 Wp reduced maximum scour depth significantly. However, the experimental investigation revealed that the best combination to be with a hooked collar width of 2.5 Wp, having sidewall height 0.45 Wp. The best combination minimized around 73.3 % of scour hole depth, compared to octagonal pier without any modification. Using experimental results, a new equation is proposed to predict the scour depth around a bridge pier fitted with hooked collar. Moreover, a relation was developed for maximum scour depth and scour hole volume. Results indicate that the scour hole volume around a bridge pier increases quadratically with maximum scour depth.

Riprap Performance at Bridge Piers Under Mobile-Bed Conditions

1998 ◽  
Vol 1647 (1) ◽  
pp. 27-33 ◽  
Author(s):  
Carlos Toro-Escobar ◽  
Richard Voigt ◽  
Bruce Melville ◽  
Meng Chiew ◽  
Gary Parker
Keyword(s):  
Experimental Tests ◽  
Bridge Piers ◽  
Design Criteria ◽  
Research Groups ◽  
Clear Water ◽  
Pier Scour ◽  
Mobile Bed ◽  
Water Conditions ◽  
Improved Design ◽  
Flood Flow

Design criteria for riprap at bridge piers in rivers is based on the specification of a size, gradation, and cover that does not fail under an appropriately chosen flood flow. Experimental tests of riprap performance at bridge piers to date have relied on a configuration for which the ambient bed is not mobilized, that is, clear-water conditions. In the field, however, riprap is, as a rule, subjected to mobile-bed conditions during floods. Recent experiments by three cooperating research groups (University of Auckland, Nanyang University, and St. Anthony Falls Laboratory) indicate a heretofore unrecognized mechanism for riprap failure under mobile-bed conditions. When the flow is in the dune regime, the passage of successive dunes causes riprap that is never directly entrained by the flow to sink and disperse. Pier scour is realized as a consequence of these processes. In some cases, the depth of scour realized is not significantly less than that which would occur without riprap. When the riprap is fully underlain by a geotextile, edge effects can cause local removal of riprap, upturning of the geotextile, and general failure. When the riprap is underlain by a partial geotextile (i.e., one that covers an area less than the riprap), edge scour causes local sinking that anchors the geotextile. The sinking and dispersion of the rest of the riprap are greatly limited, and the riprap fails only when flow velocities are sufficient for direct entrainment. The experiments suggest improved design criteria for the installation of riprap in the field.

Clear-water local scour at wide piers in shallow-water flow

2014 ◽  
Vol 9 (3) ◽  
pp. 331-343 ◽  
Author(s):  
N. Ahmad ◽  
T. Mohamed ◽  
F. H. Ali ◽  
B. Yusuf
Keyword(s):  
Laboratory Data ◽  
Local Scour ◽  
The Other ◽  
Scour Depth ◽  
Temporal Development ◽  
Clear Water ◽  
Shallow Water Flow ◽  
Equilibrium Time ◽  
Sediment Size ◽  
Flow Intensity

Laboratory data for local scour depth regarding the size of wide piers are presented. Clear water scour tests were performed for various pier widths (0.06, 0.076, 0.102, 0.14 and 0.165 m), two types of pier shapes (circular and rectangular) and two types of uniform cohesionless bed sediment (d50 = 0.23 and d50 = 0.80 mm). New data are presented and used to demonstrate the effects of pier width, pier shape and sediment size on scour depth. The influence of equilibrium time (te) on scouring processes is also discussed. Equilibrium scour depths were found to decrease with increasing values of b/d50. The temporal development of equilibrium local scour depth with new laboratory data is demonstrated for flow intensity V/Vc = 0.95. On the other hand, the results of scour mechanism have shown a significant relationship between normalized volume of scoured and deposited with pier width, b. The experimental data obtained in this study and data available from the literature for wide piers are used to evaluate predictions of existing methods.

Abutment scour in clear-water and live-bed conditions by GMDH network

2013 ◽  
Vol 67 (5) ◽  
pp. 1121-1128 ◽  
Author(s):  
Mohammad Najafzadeh ◽  
Gholam-Abbas Barani ◽  
Masoud Reza Hessami Kermani
Keyword(s):  
Back Propagation ◽  
Support Vector ◽  
Group Method ◽  
Scour Depth ◽  
Back Propagation Algorithm ◽  
Clear Water ◽  
Sediment Size ◽  
Svm Model ◽  
Vector Machines ◽  
Abutment Scour

In the present study, the Group Method of Data Handling (GMDH) network has been utilized to predict abutments scour depth for both clear-water and live-bed conditions. The GMDH network was developed using a Back Propagation algorithm (BP). Input parameters that were considered as effective variables on abutment scour depth included properties of sediment size, geometry of bridge abutments, and properties of approaching flow. Training and testing performances of the GMDH network were carried out using dimensionless parameters that were collected from the literature. The testing results were compared with those obtained using the Support Vector Machines (SVM) model and the traditional equations. The GMDH network predicted the abutment scour depth with lower error (RMSE (root mean square error) = 0.29 and MAPE (mean absolute percentage of error) = 0.99) and higher (R = 0.98) accuracy than those performed using the SVM model and the traditional equations.

Experimental investigation of the equilibrium scour depth below submerged pipes both in live-bed and clear-water regimes under the wave effect

2018 ◽  
Vol 80 ◽  
pp. 49-56 ◽  
Author(s):  
Mustafa Dogan ◽  
Aysegul Ozgenc Aksoy ◽  
Yalcin Arisoy ◽  
Mehmet Sukru Guney ◽  
Vahid Abdi
Keyword(s):  
Experimental Investigation ◽  
Scour Depth ◽  
Clear Water ◽  
Wave Effect ◽  
Water Regimes ◽  
Equilibrium Scour Depth

Design Example for Bridge Pier Scour Measures Using Toskanes

1996 ◽  
Vol 1523 (1) ◽  
pp. 173-177
Author(s):  
R. S. Burns ◽  
L. M. Fotherby ◽  
J. F. Ruff ◽  
J. M. Carey
Keyword(s):  
Design Procedure ◽  
Hydraulic Model ◽  
Bridge Pier ◽  
Pier Scour ◽  
Model Study ◽  
Design Requirements ◽  
Bridge Pier Scour ◽  
Scour Countermeasure

Toskanes were developed as an alternative scour countermeasure where riprap is not feasible or available in large sizes. The Toskane design procedure is based on results of a hydraulic model study of several different piers and abutments. Toskanes can be fabricated in sizes to meet the design requirements. One example of installing Toskanes at a bridge with a pier and vertical abutments is presented. Criteria are provided to size the Toskane. Techniques for installation are suggested and costs for the project are estimated.

scholarly journals Effect of Inclination Angles on the Local Scour around a Submerged Cylinder

Water ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2687
Author(s):  
Shaohua Wang ◽  
Shiyu Yang ◽  
Zhiguo He ◽  
Li Li ◽  
Yuezhang Xia
Keyword(s):  
Inclination Angle ◽  
Stokes Equations ◽  
Transport Model ◽  
Three Dimensional ◽  
Vertical Cylinder ◽  
Horseshoe Vortex ◽  
Local Scour ◽  
Scour Depth ◽  
Ocean Engineering ◽  
Bed Morphology

In ocean engineering and coastal environmental studies, local scour around a submerged structure is a typical issue, which is affected by the inclination of the structure. To investigate the effect of inclination directions and angles on flow structure and the bed morphology, a three-dimensional numerical model of a submerged inclined cylinder was established. In this model, the hydrodynamics are solved from the RANS (Reynolds-averaged Navier–Stokes) equations closed with the RNG k-ε turbulence model, while the bed morphology evolution is captured by the sediment transport model. In the case of vertical-cylinder scour, the simulation results agree well with existing laboratory experiments. In the cases of inclined-cylinder scour, the results show that the inclination direction not only changes the intensity and the location of the downflow but also modulates the pattern of the horseshoe vortex in front of the cylinder, thus influencing the local scour depth and the morphology of the bed. Compared with the case of vertical cylinder, the scour around an upstream-inclined cylinder is deeper, mainly due to the enhancement of downflow in front of the cylinder. The scour around a downstream-inclined cylinder is shallower and broader due to the weakened downflow and accelerated incoming flow. The maximum scour depth decreases with the inclination angle in the downstream-inclination case. In the upstream-inclination case, the maximum scour depth does not vary monotonously with the inclination angle, which results from a competitive effect of the horseshoe vortex and downflow in the front of the cylinder.

Sign in / Sign up

Export Citation Format

Share Document