scholarly journals Investigation of the influence of operational factors on the heat-protective characteristics of a package of materials for firefighter combat clothing

2021 ◽  
Vol 54 (4) ◽  
pp. 16-21
Author(s):  
Dmitriy V. Sorokin ◽  
Alexandr L. Nikiforov
Keyword(s):  
Thermal Conductivity ◽  
Porous Material ◽  
Protective Action ◽  
High Humidity ◽  
Action Time ◽  
Factors Of Influence ◽  
Operational Factors ◽  
Protective Performance ◽  
The Impact

The article is devoted to the assessment of the impact of operational factors on the heat-protective performance of a package of materials of firefighter's combat clothing. The paper considers the influence of high humidity, compression of a package of materials, the presence of reflective elements in a package of clothing materials. The operational factors of influence on the heat-protective indicators of the package of materials of the firefighter's combat clothing, which reduce the protective action time by more than 3 times, are determined. The paper notes that it is the humidity and compression of the package of materials that change the nature of heating, which is due to an increase in the thermal conductivity of the layers when these factors affect the porous material.

scholarly journals Heat generating porous matrix effects on Brownian motion of nanofluid

2019 ◽  
Vol 29 (5) ◽  
pp. 1724-1740
Author(s):  
Aydin Zehforoosh ◽  
Siamak Hossainpour ◽  
Mohammad Mehdi Rashidi
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Rayleigh Number ◽  
Porous Material ◽  
Volume Fraction ◽  
Matrix Effects ◽  
Internal Heat ◽  
Porous Matrix ◽  
Content Type ◽  
The Impact

Purpose The purpose of this study is to indicate the effect of mounting heat generating porous matrix in a close cavity on the Brownian term of CuO-water nanofluid and its impact on improving the Nusselt number. Design/methodology/approach Because of the presence of heat source in porous matrix, couple of energy equations is solved for porous matrix and nanofluid separately. Thermal conductivity and viscosity of nanofluid were assumed to be consisting of a static component and a Brownian component that were functions of volume fraction of the nanofluid and temperature. To explain the effect of the Brownian term on the flow and heat fields, different parameters such as heat conduction ratio, interstitial heat transfer coefficient, Rayleigh number, concentration of nanoparticles and porous material porosity were investigated and compared to those of the non-Brownian solution. Findings The Brownian term caused the cooling of porous matrix because of rising thermal conductivity. Mounting the porous material into cavity changes the temperature distribution and increases Brownian term effect and heat transfer functionality of the nanofluid. Besides, the effect of the Brownian term was seen to be greatest at low Rayleigh number, low-porosity and small thermal conductivity of the porous matrix. It is noteworthy that because of decrement of thermal conduction in high porosities, the impact of Brownian term drops severely making it possible to obtain reliable results even in the case of neglecting Brownian term in these porosities. Originality/value The effect of mounting the porous matrix with internal heat generation was investigated on the improvement of variable properties of nanofluid.

The Impact of Biochar on the Soil

2018 ◽  
Vol 69 (8) ◽  
pp. 2197-2208
Author(s):  
Carmen Otilia Rusanescu ◽  
Erol Murad ◽  
Cosmin Jinescu ◽  
Marin Rusanescu
Keyword(s):  
Agricultural Land ◽  
Agricultural Soils ◽  
Biomass Gasification ◽  
High Humidity ◽  
Agricultural Ecosystems ◽  
Productive Potential ◽  
Co2 Balance ◽  
Environmentally Sound ◽  
The Impact ◽  
Organic Resources

In the present paper are presented the experimental results of biomass gasification, the biochair was produced from vineyards by controlled pyrolysis at 750 �C, in order to increase the fertility of soils, it was found the increase of the fertility produced by the development of the vegetables in the soil to which was added biochar. Soil was added to soil 4 g/dm3 biochar, 8 g/dm3 biochar, the soil had no high humidity, was taken at a time when it had not rained for at least one week, the soil pH was 8, in the soil with 8 g/dm3 biochar the plants increased compared to the soil with 4 g/dm3 and the soil without biochar. The biochar resulting from pyrolysis and gasification processes is a valuable amendment to agricultural soils and an efficient and economical way to seize carbon. Using biochar it is possible to increase the diversity of agricultural land in an environmentally sound way in areas with depleted soils, limited organic resources and insufficient water for development. Helps to soil carbon sequestration with negative CO2 balance, increases the productive potential of agricultural ecosystems.

scholarly journals Numerical simulation of variable thermal conductivity on 3D flow of nanofluid over a stretching sheet

2020 ◽  
Vol 9 (1) ◽  
pp. 233-243 ◽  
Author(s):  
Nainaru Tarakaramu ◽  
P.V. Satya Narayana ◽  
Bhumarapu Venkateswarlu
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Stretching Sheet ◽  
Three Dimensional ◽  
Variable Thermal Conductivity ◽  
Normal Velocity ◽  
Transfer Coefficients ◽  
Similarity Transformations ◽  
Frictional Coefficients ◽  
The Impact

AbstractThe present investigation deals with the steady three-dimensional flow and heat transfer of nanofluids due to stretching sheet in the presence of magnetic field and heat source. Three types of water based nanoparticles namely, copper (Cu), aluminium oxide (Al2O3), and titanium dioxide (TiO2) are considered in this study. The temperature dependent variable thermal conductivity and thermal radiation has been introduced in the energy equation. Using suitable similarity transformations the dimensional non-linear expressions are converted into dimensionless system and are then solved numerically by Runge-Kutta-Fehlberg scheme along with well-known shooting technique. The impact of various flow parameters on axial and transverse velocities, temperature, surface frictional coefficients and rate of heat transfer coefficients are visualized both in qualitative and quantitative manners in the vicinity of stretching sheet. The results reviled that the temperature and velocity of the fluid rise with increasing values of variable thermal conductivity parameter. Also, the temperature and normal velocity of the fluid in case of Cu-water nanoparticles is more than that of Al2O3- water nanofluid. On the other hand, the axial velocity of the fluid in case of Al2O3- water nanofluid is more than that of TiO2nanoparticles. In addition, the current outcomes are matched with the previously published consequences and initiate to be a good contract as a limiting sense.

Characteristics of Flame Bases for V-Gutters Stabilized Premixed Flames

2013 ◽  
Author(s):  
Fan Gong ◽  
Yong Huang
Keyword(s):  
Thermal Conductivity ◽  
Temperature Gradient ◽  
Equivalence Ratio ◽  
Premixed Flames ◽  
Flame Stabilization ◽  
Operating Conditions ◽  
Inlet Temperature ◽  
Heat Conducting ◽  
Inlet Velocity ◽  
The Impact

The objective of this work is to investigate the flame stabilization mechanism and the impact of the operating conditions on the characteristics of the steady, lean premixed flames. It’s well known that the flame base is very important to the existence of a flame, such as the flame after a V-gutter, which is typically used in ramjet and turbojet or turbofan afterburners and laboratory experiments. We performed two-dimensional simulations of turbulent premixed flames anchored downstream of the heat-conducting V-gutters in a confined passage for kerosene-air combustion. The flame bases are symmetrically located in the shear layers of the recirculation zone immediately after the V-gutter’s trailing edge. The effects of equivalence ratio of inlet mixture, inlet temperature, V-gutter’s thermal conductivity and inlet velocity on the flame base movements are investigated. When the equivalence ratio is raised, the flame base moves upstream slightly and the temperature gradient dT/dx near the flame base increases, so the flame base is strengthened. When the inlet temperature is raised, the flame base moves upstream very slightly, and near the flame base dT/dx increases and dT/dy decreases, so the flame base is strengthened. As the V-gutter’s thermal conductivity increases, the flame base moves downstream, and the temperature gradient dT/dx near the flame base decreases, so the flame base is weakened. When the inlet velocity is raised, the flame base moves upstream, and the convection heat loss with inlet mixture increases, so the flame base is weakened.

scholarly journals Numerical Simulation of Heat Mass Transfer Effects on MHD Flow of Williamson Nanofluid by a Stretching Surface with Thermal Conductivity and Variable Thickness

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 684
Author(s):  
Saeed Islam ◽  
Haroon Ur Rasheed ◽  
Kottakkaran Sooppy Nisar ◽  
Nawal A. Alshehri ◽  
Mohammed Zakarya
Keyword(s):  
Thermal Conductivity ◽  
Boundary Layer ◽  
Mass Transfer ◽  
Differential Equations ◽  
Variable Thickness ◽  
Heat Mass Transfer ◽  
Mathematical Formulation ◽  
Stretching Surface ◽  
Nanofluid Flow ◽  
The Impact

The current analysis deals with radiative aspects of magnetohydrodynamic boundary layer flow with heat mass transfer features on electrically conductive Williamson nanofluid by a stretching surface. The impact of variable thickness and thermal conductivity characteristics in view of melting heat flow are examined. The mathematical formulation of Williamson nanofluid flow is based on boundary layer theory pioneered by Prandtl. The boundary layer nanofluid flow idea yields a constitutive flow laws of partial differential equations (PDEs) are made dimensionless and then reduce to ordinary nonlinear differential equations (ODEs) versus transformation technique. A built-in numerical algorithm bvp4c in Mathematica software is employed for nonlinear systems computation. Considerable features of dimensionless parameters are reviewed via graphical description. A comparison with another homotopic approach (HAM) as a limiting case and an excellent agreement perceived.

scholarly journals Thermal conductivity of unsaturated clay-rocks

2010 ◽  
Vol 14 (1) ◽  
pp. 91-98 ◽  
Author(s):  
D. Jougnot ◽  
A. Revil
Keyword(s):  
Thermal Conductivity ◽  
Porous Material ◽  
Solid Phase ◽  
Model Parameters ◽  
Electrical Parameters ◽  
New Model ◽  
Unsaturated Clay ◽  
Unsaturated Porous Material ◽  
Clay Rocks ◽  
Good Agreement

Abstract. The parameters used to describe the electrical conductivity of a porous material can be used to describe also its thermal conductivity. A new relationship is developed to connect the thermal conductivity of an unsaturated porous material to the thermal conductivity of the different phases of the composite, and two electrical parameters called the first and second Archie's exponents. A good agreement is obtained between the new model and thermal conductivity measurements performed using packs of glass beads and core samples of the Callovo-Oxfordian clay-rocks at different saturations of the water phase. We showed that the three model parameters optimised to fit the new model against experimental data (namely the thermal conductivity of the solid phase and the two Archie's exponents) are consistent with independent estimates. We also observed that the anisotropy of the effective thermal conductivity of the Callovo-Oxfordian clay-rock was mainly due to the anisotropy of the thermal conductivity of the solid phase.

scholarly journals The Impact of Variable Thermal Conductivity of Insulation Materials on the Building Energy Performance in Hot Climate

2019 ◽  
Vol 103 ◽  
pp. 02001 ◽  
Author(s):  
Maatouk Khoukhi ◽  
Ahmed Hassan ◽  
Shaimaa Abdelbaqi
Keyword(s):  
Thermal Conductivity ◽  
Energy Performance ◽  
Variable Thermal Conductivity ◽  
Transfer Model ◽  
Ambient Conditions ◽  
K Value ◽  
Hot Climate ◽  
Building Wall ◽  
Wall Assembly ◽  
The Impact

This paper illustrates the impact of embedding an insulation layer of variable thermal conductivity in a typical building wall on the cooling effect and energy performance. The evaluation was performed by applying a conjugate heat transfer model, which was tested in extremely hot conditions of Al Ain (UAE). The thermal performance of a building incorporating insulation layers of variable thermal conductivity (k-value) was compared to a non-variable thermal conductivity system by quantifying the additional heat transferred due to the k-relationship with time. The results show that, when the k-value is a function of operating temperature, its effects on the temperature profile through the wall assembly during daytime is significant compared with that obtained when a constant k-value for the polystyrene (EPS) insulation is adopted. A similar trend in the evolution of temperatures during the day and across the wall section was observed when EPS material with different moisture content was evaluated. For the polyurethane insulation, the inner surface temperature reached 44 °C when constant k-value was adopted, increasing to 48.5 °C when the k-value was allowed to vary under the same ambient conditions.

Strain Engineering of Thermal Conductivity of Two-Dimensional MoS2 and h-BN

MRS Advances ◽  
2016 ◽  
Vol 1 (32) ◽  
pp. 2297-2302 ◽  
Author(s):  
Xiaonan Wang ◽  
Alireza Tabarraei
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strain ◽  
Phonon Dispersion ◽  
Hexagonal Boron Nitride ◽  
Three Dimensional ◽  
Strain Engineering ◽  
Normal Strain ◽  
Dynamics Modeling ◽  
Molecular Dynamics Modeling ◽  
The Impact

ABSTRACTWe have used reverse nonequlibrium molecular dynamics modeling to study the impact of uniaxial stretching on the thermal conductivity of monolayer molybdenum disulfide (MoS2) and hexagonal boron nitride (h-BN). Our results predict an anomalous response of the thermal conductivity of these materials to normal strain. Thermal conductivity of h-BN increases under a tensile strain whereas thermal conductivity of MoS2 remains fairly constant. These are in striking contrast to the impact of tensile strain on the thermal conductivity of three dimensional materials whose thermal conductivity decreases under tensile strain. We investigate the mechanism responsible for this unexpected behavior by studying the impact of tensile strain on the phonon dispersion curves and group velocities of these materials.

Sign in / Sign up

Export Citation Format

Share Document