scholarly journals THE ALGORITHM FOR SEARCHING THE SOLAR CELL SCANNING AREA TO DIAGNOSE ITS EFFICIENCY

2021 ◽  
Vol 2 (64) ◽  
pp. 111-118
Author(s):  
Roman V. Levchenko ◽  
Keyword(s):  
Quality Control ◽  
Solar Cells ◽  
Solar Cell ◽  
Complete Loss ◽  
Diagnostic Process ◽  
Sensitive Area ◽  
Scanning Method ◽  
Monitor Screen ◽  
Technological Chain ◽  
Scanning Area

The article deals with the developed method for diagnosing photo scanning of solar cells using a monitor screen and a personal computer connected to it. The photo-scanning method can be used as quality control in the technological chain of semiconductor devices. The method comprises hardware and software. The hardware part is used for obtaining photoresponse in form of voltage. The software part ensures receiving, processing, storing and visualizing of data. The proposed device has a problem of entering scanning area of the solar cells. This problem is revealed at stage of element positioning in the diagnostic process. The defect is eliminated by introducing a software and mathematical support for searching sensitive area of an element. The algorithm of the scanning area search scanning is a process of exposure light spot in form of rows and columns. Photovoltage values in these areas are compared with the value of insensitivity limit. As a result, the program receives illumination area of the the solar cell effective region. The algorithm also increases the diagnostic speed in case of complete loss of efficiency in a some area of

Boron-Nitrogen Doped Dihydroindeno[1,2-b]fluorene Derivatives as Acceptors in Organic Solar Cells

2019 ◽  
Author(s):  
Matthew Morgan ◽  
Maryam Nazari ◽  
Thomas Pickl ◽  
J. Mikko Rautiainen ◽  
Heikki M. Tuononen ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
Broad Absorption ◽  
Nitrogen Doped ◽  
Large Depth ◽  
End Products ◽  
Boron Nitrogen ◽  
The Way

The electrophilic borylation of 2,5-diarylpyrazines results in the formation of boron-nitrogen doped dihydroindeno[1,2-<i>b</i>]fluorene which can be synthesized via mildly air-sensitive techniques and the end products handled readily under atmosphereic conditions. Through transmetallation via diarylzinc reagents a series of derivatives were sythesized which show broad absorption profiles that highlight the versatility of this backbone to be used in organic solar cell devices. These compounds can be synthesized in large yields, in alow number of steps and functionalized at many stages along the way providing a large depth of possibilities. Exploratory device paramaters were studied and show PCE of 2%.

All-Contactless Measurement of Series Resistance Distributions on Solar Cells with Photoluminescence Imaging

2011 ◽  
Author(s):  
M. Kasemann ◽  
L.M. Reindl ◽  
B. Michl ◽  
W. Warta ◽  
A. Schütt ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Current Flow ◽  
Series Resistance ◽  
Electrical Contacts ◽  
New Method ◽  
Contactless Measurement ◽  
Sample Handling ◽  
Imaging Methods ◽  
Lateral Current

Abstract Conventional series resistance imaging methods require electrical contacts for current injection or extraction in order to generate lateral current flow in the solar cell. This paper presents a new method to generate lateral current flow in the solar cell without any electrical contacts. This reduces the sample handling complexity for inline application and allows for measurements on unfinished solar cell precursors.

scholarly journals Ultrathin and compact electron transport layer made from novel water-dispersed Fe3O4 nanoparticles to accomplish UV-stable perovskite solar cells

2021 ◽  
Author(s):  
Song Fang ◽  
Bo Chen ◽  
Bangkai Gu ◽  
Linxing Meng ◽  
Hao Lu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Electron Transport ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Perovskite Material ◽  
Main Factors ◽  
Induced Decomposition

UV induced decomposition of perovskite material is one of main factors to severely destroy perovskite solar cells for instability. Here we report a UV stable perovskite solar cell with a...

scholarly journals Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3275
Author(s):  
Devendra KC ◽  
Deb Kumar Shah ◽  
M. Shaheer Akhtar ◽  
Mira Park ◽  
Chong Yeal Kim ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Doping Concentration ◽  
Carrier Lifetime ◽  
Short Circuit ◽  
Back Surface ◽  
Back Surface Field ◽  
Cdte Solar Cell ◽  
Cdte Solar Cells ◽  
Surface Field

This paper numerically explores the possibility of ultrathin layering and high efficiency of graphene as a back surface field (BSF) based on a CdTe solar cell by Personal computer one-dimensional (PC1D) simulation. CdTe solar cells have been characterized and studied by varying the carrier lifetime, doping concentration, thickness, and bandgap of the graphene layer. With simulation results, the highest short-circuit current (Isc = 2.09 A), power conversion efficiency (h = 15%), and quantum efficiency (QE ~ 85%) were achieved at a carrier lifetime of 1 × 103 ms and a doping concentration of 1 × 1017 cm−3 of graphene as a BSF layer-based CdTe solar cell. The thickness of the graphene BSF layer (1 mm) was proven the ultrathin, optimal, and obtainable for the fabrication of high-performance CdTe solar cells, confirming the suitability of graphene material as a BSF. This simulation confirmed that a CdTe solar cell with the proposed graphene as the BSF layer might be highly efficient with optimized parameters for fabrication.

scholarly journals Quantum Dot Sensitized Solar Cell: Photoanodes, Counter Electrodes, and Electrolytes

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2638
Author(s):  
Nguyen Thi Kim Chung ◽  
Phat Tan Nguyen ◽  
Ha Thanh Tung ◽  
Dang Huu Phuc
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Quantum Dot ◽  
Photon Absorption ◽  
Dye Molecules ◽  
Charge Generation ◽  
Counter Electrodes ◽  
Advantages And Disadvantages ◽  
Efficiency Performance ◽  
Sensitized Solar Cells

In this study, we provide the reader with an overview of quantum dot application in solar cells to replace dye molecules, where the quantum dots play a key role in photon absorption and excited charge generation in the device. The brief shows the types of quantum dot sensitized solar cells and presents the obtained results of them for each type of cell, and provides the advantages and disadvantages. Lastly, methods are proposed to improve the efficiency performance in the next researching.

scholarly journals Plasmon-Enhanced Sunlight Harvesting in Thin-Film Solar Cell by Randomly Distributed Nanoparticle Array

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1380
Author(s):  
Marwa M. Tharwat ◽  
Ashwag Almalki ◽  
Amr M. Mahros
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Near Infrared ◽  
Structural Parameters ◽  
Visible Region ◽  
Nanoparticle Array ◽  
Solar Energy Harvesting ◽  
Infra Red ◽  
Crucial Parameter

In this paper, a randomly distributed plasmonic aluminum nanoparticle array is introduced on the top surface of conventional GaAs thin-film solar cells to improve sunlight harvesting. The performance of such photovoltaic structures is determined through monitoring the modification of its absorbance due to changing its structural parameters. A single Al nanoparticle array is integrated over the antireflective layer to boost the absorption spectra in both visible and near-infra-red regimes. Furthermore, the planar density of the plasmonic layer is presented as a crucial parameter in studying and investigating the performance of the solar cells. Then, we have introduced a double Al nanoparticle array as an imperfection from the regular uniform single array as it has different size particles and various spatial distributions. The comparison of performances was established using the enhancement percentage in the absorption. The findings illustrate that the structural parameters of the reported solar cell, especially the planar density of the plasmonic layer, have significant impacts on tuning solar energy harvesting. Additionally, increasing the plasmonic planar density enhances the absorption in the visible region. On the other hand, the absorption in the near-infrared regime becomes worse, and vice versa.

Additive-induced Miscibility Regulation and Hierarchical Morphology Enables 17.5% Binary Organic Solar Cells

2021 ◽  
Author(s):  
Jie Lv ◽  
Hua Tang ◽  
Jiaming Huang ◽  
Cenqi Yan ◽  
Kuan Liu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
Power Conversion ◽  
Charge Trapping ◽  
Free Charge ◽  
Charge Generation ◽  
Low Charge ◽  
Hierarchical Morphology

Due to the barrierless free charge generation, low charge trapping, and high charge mobilities, the PM6:Y6 organic solar cell (OSC) achieves excellent power conversion efficiency (PCE) of 15.7%. However, the...

scholarly journals Digital printing of a novel electrode for stable flexible organic solar cells with a power conversion efficiency of 8.5%

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
S. Wageh ◽  
Mahfoudh Raïssi ◽  
Thomas Berthelot ◽  
Matthieu Laurent ◽  
Didier Rousseau ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Solution Processed ◽  
Transparent Conducting

AbstractPoly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) mixed with single-wall nanotubes (SWNTs) (10:1) and doped with (0.1 M) perchloric acid (HClO4) in a solution-processed film, working as an excellent thin transparent conducting film (TCF) in organic solar cells, was investigated. This new electrode structure can be an outstanding substitute for conventional indium tin oxide (ITO) for applications in flexible solar cells due to the potential of attaining high transparency with enhanced conductivity, good flexibility, and good durability via a low-cost process over a large area. In addition, solution-processed vanadium oxide (VOx) doped with a small amount of PEDOT-PSS(PH1000) can be applied as a hole transport layer (HTL) for achieving high efficiency and stability. From these viewpoints, we investigate the benefit of using printed SWNTs-PEDOT-PSS doped with HClO4 as a transparent conducting electrode in a flexible organic solar cell. Additionally, we applied a VOx-PEDOT-PSS thin film as a hole transporting layer and a blend of PTB7 (polythieno[3,4-b] thiophene/benzodithiophene): PC71BM (phenyl-C71-butyric acid methyl ester) as an active layer in devices. Zinc oxide (ZnO) nanoparticles were applied as an electron transport layer and Ag was used as the top electrode. The proposed solar cell structure showed an enhancement in short-circuit current, power conversion efficiency, and stability relative to a conventional cell based on ITO. This result suggests a great carrier injection throughout the interfacial layer, high conductivity and transparency, as well as firm adherence for the new electrode.

scholarly journals Numerical Simulation Analysis of Ag Crystallite Effects on Interface of Front Metal and Silicon in the PERC Solar Cell

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 592
Author(s):  
Myeong Sang Jeong ◽  
Yonghwan Lee ◽  
Ka-Hyun Kim ◽  
Sungjin Choi ◽  
Min Gu Kang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
High Efficiency ◽  
Open Circuit Voltage ◽  
Surface Recombination ◽  
Open Circuit ◽  
Surface Recombination Velocity ◽  
Metal Interface ◽  
Ag Crystallites ◽  
Recombination Velocity

In the fabrication of crystalline silicon solar cells, the contact properties between the front metal electrode and silicon are one of the most important parameters for achieving high-efficiency, as it is an integral element in the formation of solar cell electrodes. This entails an increase in the surface recombination velocity and a drop in the open-circuit voltage of the solar cell; hence, controlling the recombination velocity at the metal-silicon interface becomes a critical factor in the process. In this study, the distribution of Ag crystallites formed on the silicon-metal interface, the surface recombination velocity in the silicon-metal interface and the resulting changes in the performance of the Passivated Emitter and Rear Contact (PERC) solar cells were analyzed by controlling the firing temperature. The Ag crystallite distribution gradually increased corresponding to a firing temperature increase from 850 ∘C to 950 ∘C. The surface recombination velocity at the silicon-metal interface increased from 353 to 599 cm/s and the open-circuit voltage of the PERC solar cell decreased from 659.7 to 647 mV. Technology Computer-Aided Design (TCAD) simulation was used for detailed analysis on the effect of the surface recombination velocity at the silicon-metal interface on the PERC solar cell performance. Simulations showed that the increase in the distribution of Ag crystallites and surface recombination velocity at the silicon-metal interface played an important role in the decrease of open-circuit voltage of the PERC solar cell at temperatures of 850–900 ∘C, whereas the damage caused by the emitter over fire was determined as the main cause of the voltage drop at 950 ∘C. These results are expected to serve as a steppingstone for further research on improvement in the silicon-metal interface properties of silicon-based solar cells and investigation on high-efficiency solar cells.

scholarly journals CdTe-Based Thin Film Solar Cells: Past, Present and Future

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1684
Author(s):  
Alessandro Romeo ◽  
Elisa Artegiani
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Early Years ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

CdTe is a very robust and chemically stable material and for this reason its related solar cell thin film photovoltaic technology is now the only thin film technology in the first 10 top producers in the world. CdTe has an optimum band gap for the Schockley-Queisser limit and could deliver very high efficiencies as single junction device of more than 32%, with an open circuit voltage of 1 V and a short circuit current density exceeding 30 mA/cm2. CdTe solar cells were introduced at the beginning of the 70s and they have been studied and implemented particularly in the last 30 years. The strong improvement in efficiency in the last 5 years was obtained by a new redesign of the CdTe solar cell device reaching a single solar cell efficiency of 22.1% and a module efficiency of 19%. In this paper we describe the fabrication process following the history of the solar cell as it was developed in the early years up to the latest development and changes. Moreover the paper also presents future possible alternative absorbers and discusses the only apparently controversial environmental impacts of this fantastic technology.

Sign in / Sign up

Export Citation Format

Share Document