scholarly journals Treatment of effluent from fertilizer industry by adsorption on willow sawdust-removal of Ni(II) and Cd(II) from the effluent

2021 ◽  
pp. 1-12
Author(s):  
Raafia Najam ◽  
Syed Muzaffar Ali Andrabi
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
The World ◽  
Pseudo Second Order ◽  
Almost All ◽  
Willow Tree

Sawdust of willow has been investigated as an adsorbent for the removal of Ni(II), and Cd(II) ions from aqueous solution. Since willow tree is widely grown in almost all parts of Kashmir, it can be a common most easily available, sustainable, low cost adsorbent for the treatment of wastewaters in this part of the world where growing industrialization is affecting water quality like elsewhere in the world. Therefore, it is worthwhile to investigate the potential of sawdust of willow tree as an adsorbent for the removal of Ni(II) and Cd(II) ions from aqueous solution as a first step. Batch experiments were conducted to study the effect of some parameters such as contact time, initial concentration of metal ions, solution pH and temperature. Langmuir and Freundlich models were employed for the mechanistic analysis of experimental data obtained. Results reveal that in our system adsorption follows the Langmuir isotherm. The maximum adsorption capacity of Ni(II) and Cd(II) were found to be 7.98 and 7.11 mg/g respectively at optimum conditions. The pseudo-first-order and pseudo-second-order models were employed for kinetic analysis of adsorption process. The adsorption process follows pseudo-second-order kinetics. The efficacy of the adsorbent in the treatment of effluent from fertilizer factory has been investigated and the results have been found encouraging.

scholarly journals Sumac Leaves as a Novel Low-Cost Adsorbent for Removal of Basic Dye from Aqueous Solution

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Öznur Dülger ◽  
Fatma Turak ◽  
Kadir Turhan ◽  
Mahmure Özgür
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Low Cost ◽  
Second Order ◽  
Initial Solution ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Intraparticle Diffusion Model ◽  
Pseudo Second Order

Sumac Leaves (SL) (Rhus Coriaria L. ) were investigated as an inexpensive and effective adsorbent for the adsorption of methylene blue (MB) from aqueous solution. The effects of initial dye concentration, initial solution pH, phases contact time, and adsorbent dose on the adsorption of MB on SL were investigated. The amount of dye adsorbed was found to vary with initial solution pH, Sumac Leaves dose, MB concentration, and phases contact time. The Langmuir and Freundlich adsorption models were evaluated using the experimental data and the experimental results showed that the Langmuir model fits better than the Freundlich model. The maximum adsorption capacity was found to be 151.69 mg/g from the Langmuir isotherm model at 25°C. The value of the monolayer saturation capacity of SL was comparable to the adsorption capacities of some other adsorbent materials for MB. The adsorption rate data were analyzed according to the pseudo-first order kinetic and pseudo-second order kinetic models and intraparticle diffusion model. It was found that kinetic followed a pseudo-second order model.

Preparation of bio-based magnetic adsorbent and application for efficient removal of Cd(II) from water

2018 ◽  
Vol 77 (5) ◽  
pp. 1313-1323 ◽  
Author(s):  
Jianjun Zhou ◽  
Xionghui Ji ◽  
Xiaohui Zhou ◽  
Jialin Ren ◽  
Yaochi Liu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
Order Model ◽  
Efficient Removal ◽  
Adsorption Ability ◽  
Adsorption Sites ◽  
Pseudo Second Order

Abstract A novel magnetic bio-adsorbent (MCIA) was developed, characterized and tested for its Cd(II) removal from aqueous solution. MCIA could be easily separated from the solution after equilibrium adsorption due to its super-paramagnetic property. The functional and magnetic bio-material was an attractive adsorbent for the removal of Cd(II) from aqueous solution owing to the abundant adsorption sites, amino-group and oxygen-containing groups on the surface of Cyclosorus interruptus. The experimental results indicated that the MCIA exhibited excellent adsorption ability and the adsorption process was spontaneous and endothermic. The adsorption isotherm was consistent with the Langmuir model. The adsorption kinetic fitted the pseudo-second-order model very well. The maximum adsorption capacity of Cd(II) onto MCIA was 40.8, 49.4, 54.6 and 56.6 mg/g at 293, 303, 313 and 323 K, respectively. And the MCIA exhibited an excellent reusability and impressive regeneration. Therefore, MCIA could serve as a sustainable, efficient and low-cost magnetic adsorbent for Cd(II) removal from aqueous solution.

Study of the kinetics and the adsorption isotherm of cadmium(II) from aqueous solution using green algae (Ulva lactuca) biomass

2015 ◽  
Vol 72 (9) ◽  
pp. 1505-1515 ◽  
Author(s):  
H. Asnaoui ◽  
A. Laaziri ◽  
M. Khalis
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Ulva Lactuca ◽  
Order Kinetic ◽  
Solution Ph ◽  
Algae Biomass ◽  
Pseudo Second Order

Batch experiments were conducted to study the adsorption of hazardous cadmium onto low-cost algae biomass in aqueous solution with respect to concentration of adsorbate, adsorbent dosage, contact time, solution pH and temperature. Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The activation energy of adsorption was also evaluated for the adsorption of cadmium onto Ulva lactuca biomass. Experimental data were tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of Cd(II) followed well pseudo-second-order kinetics. Langmuir and Freundlich models were applied to describe the biosorption isotherm of the metal ions by Ulva lactuca biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The biosorption capacity of Ulva lactuca biomass for cadmium was found to be 3.02 mg/g at pH 5.60 min equilibrium time and 20 °C. The mean free energy which was calculated was 6.24 kJ/mol for Cd(II) biosorption, which shows that the adsorption is physical. The calculated thermodynamic parameters (ΔG0, ΔH0 and ΔS0) showed that the biosorption of Cd(II) onto Ulva lactuca biomass was feasible, spontaneous and exothermic under examined conditions. The results indicate that algae Ulva lactuca could be employed as a low-cost material for the removal of metal ions from aqueous solution.

scholarly journals ADSORPTION CHARACTERISTICS OF ZIZYPHUS JUJUBA SEED SHELL ACTIVATED NANO POROUS CARBON FOR REMOVING COPPER (II) IONS FROM WASTEWATER

2016 ◽  
Vol 4 (12) ◽  
pp. 226-241
Author(s):  
K Veeravelan ◽  
S Arivoli ◽  
V Marimuthu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch Mode ◽  
Zizyphus Jujuba ◽  
Pseudo Second Order ◽  
Nano Carbon

In the present study, adsorption of copper (II) ions from aqueous solution by Activated Zizyphus Jujuba shell Nano Carbon was investigated under batch mode. The influence of solution pH, sorbent dose, copper concentration, contact time and temperature was studied. The copper adsorption was favored with maximum adsorption at pH 6.5. Sorption equilibrium time was observed in 60 min. The equilibrium adsorption data were correlated with Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Hurkins-Jura, Halsay, Radlich-Peterson, Jovanovic and BET isotherm models. The kinetics of the adsorption process was tested by pseudo-first-order, pseudo-second order, Elovich and Intra-particle diffusion models. It was shown that adsorption of copper could be described by the pseudo-second order kinetic model. Thermodynamic parameters such as Gibbs free energy (ΔG0), the enthalpy (ΔH0) and the entropy change of sorption (ΔS0) have also been evaluated and it has been found that the adsorption process was spontaneous, feasible and endothermic in nature. The results indicated that Activated Zizyphus Jujuba shell Nano Carbon can be used as an effective and low-cost adsorbent to remove copper (II) from aqueous solution.

scholarly journals Removal of Methylene Blue Dye From Aqueous Solution Using PDADMAC Modified ZSM-5 Zeolite as a Novel Adsorbent 

2021 ◽  
Author(s):  
Sabarish Radoor ◽  
Jasila Karayil ◽  
Aswathy Jayakumar ◽  
Jyotishkumar Parameswaranpillai ◽  
Suchart Siengchin
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Contact Time ◽  
Adsorption Process ◽  
Nitrogen Adsorption ◽  
Second Order ◽  
Blue Dye ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order

Abstract In the present work, we modified ZSM-5 zeolite using a bio polymer poly (diallyl dimethyl ammonium chloride) and employed it for the removal of cationic dye, methylene blue from aqueous solution. The chemical and physical properties of the modified ZSM-5 zeolite were investigated using XRD, FTIR, SEM, TEM, nitrogen adsorption, TGA and 27Al NMR. Modified ZSM-5 zeolite possesses high surface area and pore diameter which was confirmed from SEM, TEM and nitrogen adsorption analysis. Adsorption of methylene blue on zeolite was investigated by batch adsorption technique. The effect of different parameters such as zeolite dosage, initial methylene blue concentration, temperature, pH and contact time on the adsorption process was discussed. Maximum adsorption capacity (4.31 mg/g) was achieved using 0.1g of modified ZSM-5 zeolite at the optimum conditions (initial dye concentration: 10 mg/L, pH: 10, temperature:30oC and contact time: 300 min). The experimental data were fitted into Langmuir and Freundlich models and the results indicate that the adsorption process followed Freundlich isotherm. Kinetic data were investigated using pseudo-first-order and pseudo-second-order models. Kinetic analysis indicates that pseudo-second-order model is more suitable to describe adsorption of MB on modified ZSM-5 zeolite. The reusability test suggests that the adsorbent could be reused at least six times without significant loss in removal efficiency.

scholarly journals Cationic Dye Removal By Sugarcane Bagasse Activated Carbon From Aqueous Solution

2015 ◽  
Vol 17 (4) ◽  
pp. 784-795 ◽  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Activated Carbon ◽  
Sugarcane Bagasse ◽  
Dye Removal ◽  
Adsorption Process ◽  
Low Cost ◽  
Second Order ◽  
Cationic Dye ◽  
Pseudo Second Order

<div> <p>Low cost agricultural waste adsorbents can be viable alternatives to activated carbon for the treatment of contaminated wastewater. Sugarcane Bagasse, an abundant agriculture waste in Egypt, was used in the present study to prepare activated carbon. Batch adsorption experiments were conducted to study its effectiveness to remove cationic dye methylene blue from aqueous solution. The effects of initial dye concentrations, agitation time, solution pH and temperature on methylene blue dye removal were investigated. The optimum pH value for the maximum percentage removal of the dye was 7. Adsorption isotherms were determined and modeled with Redlich&ndash;Peterson, Langmuir and Freundlich equations at 20&ordm;C.The kinetic data were analyzed using Pseudo-first order, pseudo-second order. The mechanism of the adsorption process was determined from the intraparticle diffusion model. Thermodynamic parameters such as standard enthalpy (ΔH&deg;), standard entropy (ΔS&deg;) and free energy (ΔG&deg;) were determined.&nbsp; The equilibrium data were best fitted to the Redlich&ndash;Peterson isotherm model .The adsorption kinetics was found to follow the pseudo-second-order kinetic model with good correlation coefficient. The positive ΔH<sup>◦</sup> value indicated that the adsorption process was endothermic in nature. The results revealed sugarcane bagasse activated carboncould be employed as a low-cost alternative adsorbent in wastewater treatment.&nbsp;</p> </div> <p>&nbsp;</p>

scholarly journals Adsorptive Removal of Fe (II) By NaOH Treated Rice Husk: Adsorption Equilibrium And Kinetics

2021 ◽  
Vol 14 (14) ◽  
pp. 75-82
Author(s):  
Sunita Shrestha ◽  
Anita Kumari Dhami ◽  
Armila Rajbhandari Nyachhyon
Keyword(s):  
Surface Area ◽  
Rice Husk ◽  
Adsorption Process ◽  
Low Cost ◽  
Second Order ◽  
Maximum Efficiency ◽  
Maximum Adsorption Capacity ◽  
Adsorption Method ◽  
Equilibrium And Kinetics ◽  
Pseudo Second Order

The low cost adsorbents were prepared from raw rice husk (RRH) and NaOH treated rice husk (NRH). Then prepared materials were characterized by XRD, FTIR and surface area of rice husk adsorbent were determined by methylene blue adsorption method. XRD showed amorphous nature with low crystallinity of the material. The FTIR spectra showed the presence of oxygenated functional groups such as ester, phenol, carbonyl and silica on the material. The surface area of RRH and NRH were found to be 387 and 417 m2/g respectively. Thus, prepared adsorbents were used for the removal of Fe(II) ion from aqueous solution. The influence of various parameters like pH, adsorbent doge, and contact time were studied for the better adsorption of Fe(II) on rice husk adsorbents. Results revealed that the maximum efficiency was achieved at pH 3 for Fe(II). The adsorption process was found to be best fitted to Langmuir adsorption isotherm model controlled by pseudo-second–order kinetics with the rate constant value i.e. 0.0218 and 0.0235 g/(mg·min) for RRH and NRH respectively.  The χ2 values of pseudo second order was found to be lower which confirmed chemisorption, involving ion exchange and valence forces through sharing or exchange of electrons between adsorbent and adsorbate. The maximum adsorption capacity for Fe(II) on RRH and NRH was found to be 2.9 mg/g and 5.6 mg/g respectively. The positive ∆G value represents the randomness of the system during adsorption process. The slope of the linear plot of Qt vs t0.5 was linear but not passed through the origin, which indicates that, the intraparticle diffusion was not only rate controlling step. Temkin value showed the maximum binding energy (KT) for NRH was 16.4 L/g and for RRH it was 12.2 L/g. 

scholarly journals Eggshell Powder as an Adsorbent for Removal of Fluoride from Aqueous Solution: Equilibrium, Kinetic and Thermodynamic Studies

2012 ◽  
Vol 9 (3) ◽  
pp. 1457-1480 ◽  
Author(s):  
R. Bhaumik ◽  
N. K. Mondal ◽  
B. Das ◽  
P. Roy ◽  
K. C. Pal ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Fluoride Removal ◽  
Contaminated Water ◽  
Fluoride Adsorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Maximum Removal

A new medium, eggshell powder has been developed for fluoride removal from aqueous solution. Fluoride adsorption was studied in a batch system where adsorption was found to be pH dependent with maximum removal efficiency at 6.0. The experimental data was more satisfactorily fitted with Langmuir isotherm model. The kinetics and the factor controlling adsorption process fully accepted by pseudo-second-order model were also discussed. Eawas found to be 45.98 kJmol-1by using Arrhenius equation, indicating chemisorption nature of fluoride onto eggshell powder. Thermodynamic study showed spontaneous nature and feasibility of the adsorption process with negative enthalpy (∆H0) value also supported the exothermic nature. Batch experiments were performed to study the applicability of the adsorbent by using fluoride contaminated water collected from affected areas. These results indicate that eggshell powder can be used as an effective, low-cost adsorbent to remove fluoride from aqueous solution as well as groundwater.

Adsorption of Ni (II) from Aqueous Solution Based on Porous Magnetic/Chitosan Resin

2014 ◽  
Vol 936 ◽  
pp. 829-833
Author(s):  
Hai Song ◽  
Xing Hai Yu ◽  
Xiao Qin Zhang ◽  
Gui Fang Yan ◽  
Yuan Zhi Zhen
Keyword(s):  
Aqueous Solution ◽  
Aqueous Medium ◽  
Thermodynamic Parameters ◽  
Adsorption Process ◽  
Low Cost ◽  
Second Order ◽  
Magnetic Chitosan ◽  
Spontaneous Process ◽  
Chitosan Resin ◽  
Kinetics And Thermodynamic

The purpose of this work is to prepare a low-cost biosorbent,Porous Magnetic/Chitosan Resin(MCR), and determine the ability of this biosorbent to removing Ni (II) ion from aqueous medium. Both kinetics and thermodynamic parameters of the adsorption process were also estimated. The thermodynamic parameters indicated an exothermic spontaneous process and the kinetics followed the second-order adsorption process.

scholarly journals Synthesis Fe3O4/Talc nanocomposite by coprecipition-ultrasonication method and advances in hexavalent chromium removal from aqueous solution

2020 ◽  
Vol 38 (9-10) ◽  
pp. 483-501
Author(s):  
Nguyen Thi Huong ◽  
Nguyen Ngoc Son ◽  
Vo Hoang Phuong ◽  
Cong Tien Dung ◽  
Pham Thi Mai Huong ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Batch Experiments ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Langmuir And Freundlich Equations

The Fe3O4/Talc nanocomposite was synthesized by the coprecipitation-ultrasonication method. The reaction was carried out under a inert gas environment. The nanoparticles were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), fourier-transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry techniques (VSM), the surface area of the nanoparticles was determined to be 77.92 m2/g by Brunauer-Emmett-Teller method (BET). The kinetic data showed that the adsorption process fitted with the pseudo-second order model. Batch experiments were carried out to determine the adsorption kinetics and mechanisms of Cr(VI) by Fe3O4/Talc nanocomposite. The adsorption process was found to be highly pH-dependent, which made the material selectively adsorb these metals from aqueous solution. The isotherms of adsorption were also studied using Langmuir and Freundlich equations in linear forms. It is found that the Langmuir equation showed better linear correlation with the experimental data than the Freundlich. The thermodynamics of Cr(VI) adsorption onto the Fe3O4/Talc nanocomposite indicated that the adsorption was exothermic. The reusability study has proven that Fe3O4/Talc nanocomposite can be employed as a low-cost and easy to separate.

Sign in / Sign up

Export Citation Format

Share Document