NEW METHODS OF ACCOUNTING FOR VERTICAL REFRACTION WITH TRIGONOMETRIC LIVELING IN THE CONDITIONS OF THE REPUBLIC OF UZBEKISTAN

2018 ◽  
pp. 55-57
Author(s):  
A.S. Suyunov ◽  
U.A. Berdiculov ◽  
Sh.A. Suyunov

In the conditions of Uzbekistan, a simple and ordinary method of refraction is used to determine the relative elevations without vertical refraction coefficient or angle. Described that these methods require a two-sided simultaneous or non-simultaneous geodetic measurements. Working formulas for vertical refraction are presented by calculating vertical gradients in geodetic measurement points.

2018 ◽  
Vol 99 (5) ◽  
pp. 851-854
Author(s):  
A R Akhmadeev ◽  
M A Kunst ◽  
A V Kosterina ◽  
S N Terekhova ◽  
A A Gaybaryan ◽  
...  

The article presents an overview of the development of hematology service in the Republic of Tatarstan. The well-known scientist Nikolay Konstantinovich Goryaev (1875-1943), who worked in Kazan for a long time, began to develop this direction and after passing an internship in Germany proposed an improved device for calculating the blood elements known throughout the world. Adherents of Professor Goryaev continued research in the field of hematology, a blood transfusion station was organized. Professor S.I. Sherman proposed new methods of diagnosis and treatment of B12 deficiency anemia. Professor Sh.I. Ratner studied the changes in the blood picture in diseases of the abdominal cavity. The first 15 specialized hematological beds were opened in 1968 in the hospital named “Old Clinic”. The physician who treated such patients was Rakhil Sholomovna Dashevskaya, PhD. At present, hematology service is provided by three hospitals in Kazan, hematological and therapeutical beds in Naberezhnye Chelny and Nizhnekamsk, outpatient hematology service in Zelenodolsk. In recent years, the introduction of stem cell therapy has begun, and modern combined methods of chemotherapy have been introduced.


Moldoscopie ◽  
2021 ◽  
pp. 80-86
Author(s):  
Margareta Bradu ◽  

The economic and health shocks of 2020 have had a negative impact on the quality of life and livelihoods of millions of households, disrupted business activities, and an indescribable global economic recession. In this article, the author investigates the influencing factors on the rebirth of the competitiveness of the national economy, which suffered from the pandemic, not only in our country but also in the world. Now all countries are facing new conditions and are looking for ways to revive both social and economic. Therefore, economic competitiveness may be the process that would lead to post-pandemic economic recovery. All that remains is for each country to select those strong factors that would lead to the rebirth of the competitiveness of the national economy. The Republic of Moldova, in order to start the process of rebirth of economic competitiveness, must invest in the renewal of the education system, the health system and new methods of motivation must be developed in order to maintain and attract the talents gone abroad, back to the country


Author(s):  
E. Tishkova ◽  
N. Kostomakhin

One of the main tasks of the development of the national economics of the Altai Republic is a rapid and signifi cant rise in animal husbandry, both in terms of increasing the number of all animal species, and in terms of increasing the productivity of maral breeding. New methods, new breeds, and highly productive types and lines are needed to solve these complex problems. Any breed is characterized by the unique gene pool and is the result of a long, purposeful and hard work. The scientists had the task of breeding and researching a breed type of maral of Altai-Sayan breed, which is common in some regions of the Republic. The object of the research was marals of the breed type has been bred in the APC BF “Tenginsky”, which were distributed both in the Republic of Altai and in other regions of the Russian Federation. In the sharply continental environments of the highlands animals have been bred that are characterized by a large live weight, high antler productivity and reproductive traits. With regard to the typicality and technological properties of antlers, marals in the APC BF “Tenginsky” occupy the first place in the production of antler products and breeding young animals. A complex evaluation of the method for the distinctiveness, uniformity and stability of breed type of marals has shown that the antler productivity of Tenginsky type antlers has higher indicators not only relative to the marals of neighboring farms, but also higher than the average indicators of the AltaiSayan breed by 30 %. Adult Siberian stags of Tenginsky type have live weight in the range 270–350 kg. Marals of the tengin type belong to large deer with a height of 150–165 cm at the withers. The horns of marals of the Tenginsky type are large in size and have 6–7 appendages. A distinctive feature of the main array of antlers in the Tenginsky type of antlers is the presence of short, but thick in girth trunks. The antler productivity of individual Siberian stags reaches 19,0–23,6 kg of raw antlers. The bred type includes high-class animals (91,6 % elite and class I), which annually produce more than 5,5 t of antlers and at least 350 breeding calves.


2021 ◽  
Vol 13 (6) ◽  
pp. 3017
Author(s):  
Jakub Chromčák ◽  
Daša Bačová ◽  
Pavol Pecho ◽  
Anna Seidlová

Hand in hand with the increasing interest in the environment, this work puts the spotlight on ecological stability itself. The Coefficient of Ecological Stability (CES) indicates a chosen region’s stability level that may be calculated using various methodical instructions. For exact CES determination, it is necessary to divide the area of interest correctly into predefined classes and the division quality has a direct impact on the final CES value precision which presents its informative value. For CES calculations in the past, terrestrial measurements and processing were used. Regarding the new methods of spatial data acquisition such as photogrammetry or remote sensing, there comes the question of the usage of these data for secondary purposes, such as for ecology. This articles goal is to test the use of the images taken by an Unmanned Aerial Vehicle (UAV) for CES calculation. The main objective is to highlight the possibility of a UAV to measure CES without terrestrial measurements. The second objective is to compare the actual formulas for CES calculation and to observe the differences between the results from different calculations. Another aim is to show the inconsistency of calculations which lead to legislative unification. The aim is to apply a new method of CES calculation using Geographic Information System (GIS) software and modern methods of data acquisition and to point out the benefits, mainly including the time factor, which is closely related to the terrestrial geodetic measurement, when the CES value is about to be calculated for such a spacious area.


1923 ◽  
Vol 17 (1) ◽  
pp. 63-76 ◽  
Author(s):  
Charles Noble Gregory

In the April number of this Journal for 1921, Prof. Philip Marshall Brown discussed in a most interesting way “The Aaland Islands Question”.He dealt with the claim of the islanders to determine by a plebiscite whether they should remain incorporated with the Republic of Finland or be transferred to the Kingdom of Sweden, a transfer apparently desired by almost their entire number, and with the advisory report of the Committee of Jurists thereon. This was, however, a mere step in extended transactions. Now they have been carried through, and not only the issue decided, but a precedent established as to the right of the Council of the League of Nations to intervene for the settlement of international disputes. Moreover, the practice and procedure which may be adopted therefor have been indicated. A review of the whole accomplishment and of the new methods employed seems, therefore, appropriate.


2014 ◽  
Vol 12 ◽  
pp. 16-21
Author(s):  
Jaroslav Braun ◽  
Martin Štroner

The paper deals with geodetic measurements of mutual longitudinal displacements ofconstruction of the railway bridge and rails on the bridge in Klášterec nad Oh í.Construction of the bridge is made of steel with a concrete deck, which carries the stonesuperstructure and rails. The bridge is about 100 meters long and expected deformationsare in millimetres. The method of geodetic network with the expected standard deviationsof coordinates about 0.2 mm was chosen. The deformation of the structure was determinedto be 4 mm, the deformation of the rails was determined to be 1 mm, both as a result ofepoch comparison.


Polar Record ◽  
1950 ◽  
Vol 5 (39) ◽  
pp. 440-449
Author(s):  
A. J. Hagger

Near the Poles, the geographical system of reference by meridians and parallels approaches limiting conditions, and the apparent motion of heavenly bodies is unfamiliar. Accepted routines of navigation break down, and it is therefore necessary to devise new methods for the use of aircraft in polar regions. In addition, the weakness of the magnetic field in these regions forces us to modify or supplement the ordinary method of steering by magnetic compass. It cannot be too much emphasised, however, that the overriding criteria by which any technique must be examined are those which are common to navigation in all latitudes, and which are imposed by the nature of the aircraft itself. They arise chiefly owing to the speed and instability of the machine, and to the conditions of physical and mental strain in which the aerial navigator must work. Techniques and instruments must survive the three-fold test, applicable to any latitude: “Is the manipulative process handy enough to be done accurately by a navigator, tired or under nervous tension?”, “Is it simple enough for him to avoid errors under conditions of stress or mild anoxia?”, and “Is it fast enough?”


Author(s):  
Slađana Milićević

This work depicts the way in which the term of scene design is formed, used and developed in professional and educational system in the Republic of Serbia. The introductory part presents what that term means, how it was made and how it has evolved since the 90s. The main part of the work by means of particular examples shows how scene design was first a specific methodology in educating the students of architecture at the Department of Architecture and Urban Planning at the Faculty of Technical Sciences in Novi Sad, then how establishing the studies of scene design at the same faculty made this methodology evolve into the professional field, where new and authentic research methods relating space emerged. Method of performing is outlined and analysed as one of that new methods, formed in the processes of contemplation, articulation, and realisation of performance space through different parts of the curriculum of new scene design studies. The goal of the work is to show the potential of this method for thorough research not only of performance space but space in general. Likewise, to show how this method could be a valuable tool in educating not only scene design and architecture students, but all the other educational profiles interested in spatial research and spatial design.


Sign in / Sign up

Export Citation Format

Share Document