scholarly journals A Analisis Daya Saing Usaha tani Kopi Libtukom Di Kabupaten Tanjung Jabung Barat

2020 ◽  
Vol 4 (1) ◽  
pp. 692-715
Author(s):  
Popy Handayani Handayani

              After entering the era of free trade in 2015 in the ASEAN Economic Community (MEA) and 2020 around the world through WTO (World Trade Organization) agreement, many things must be considered, each country is required to improve its competitiveness through development in various sectors of the economy especially the goods to be exported to the destination country.               The purpose of this research is to analyze the competitiveness of Libtukom Coffea (competitive and comparative advantage), analyze the impact of government policy on output and input on libtukom coffea farming and analyze competitiveness sensitivity of Libtukom coffea farming to change of output and input. This study uses primary and secondary data sources, to determine the number of respondents calculated by the formula slovin diproleh number of respondents as much as 92 respondents. The data obtained were analyzed using descriptive analysis method and the infractional method by tabulating and processed by using PAM (Policy Analysis Matrix) method. From the result of the research, it can be concluded that: (1) Cultivation of libtukom coffea in Distric of West Tanjung Jabung has comparative and competitive advantage. The use of resources in the research area at the market and international market rates is efficient for economic and financial use as indicated by PCR and DRCR values ​​obtained <1, for PCR obtained 0.195 and DRCR 0.176; (2) In general, local government policies for leather farming still have not shown favorable partiality for small farmers. This can be seen from the result of NPCO value obtained <1 that is equal to 0.912 and seen from NPCI that> 1 is 1.006 and (3) In the simulation of sensitivity done obtained the production costs incurred by each farmer for libtukom coffea cultivation can be covered by the selling price earned.

2020 ◽  
Vol 8 (1) ◽  
pp. 17-26
Author(s):  
Evi Noviasari ◽  
Richad Alamsyah

The purpose of this study were to know the role of calculation cost of goods manufactured and  determination of the selling price of shoes in the Heriyanto’s shoes MSME. To knowing the extent of differences in determination the cost of goods manufactured by using the company method and the full costing approach and compare the selling price according to the company's method with using the Cost Plus Pricing. The type of research used is qualitative research. The analytical method used in this study is qualitative descriptive analysis. The data used in this study are primary data. Data were obtained directly through observation and interviews with the Heriyanto’s shoes MSME and data in the form of information on production costs such as raw material costs, labor costs, and factory overhead costs MSME during December 2018. While for secondary data. Data were obtained from intermediary media such as books or literature, journals related to the title of the research, and can also be via the internet. The results of the study it can be concluded that the cost of goods manufactured calculation according Heriyanto’s MSME is lower than the cost of  goods manufactured calculation using the full costing method. The cost of goods manufactured according heriyanto’s MSME is Rp. 15.675/pair or Rp. 313.492/score (Hamer Material) and Rp. 14.600/pair or Rp. 291.992/score (Kavaro Material). While the cost of goods manufactured used the full costing method, which is Rp. 16.310/pair or Rp. 326.201/score (Hamer Material) and Rp. 15.235/pair or Rp. 304.701/score (Kavaro Material). This is caused  factory overhead costs that are not calculate by Heriyanto’s MSME such as electricity costs, gas costs, maintenance costs for machinery and factory vehicles, and depreciation costs.             Determination of selling price must be appropriately because the determination of selling prices that are too high will result in difficulty competition with similar products while the determination of selling prices too low will result in reduced income generated by Heriyanto’s MSME. The difference in determination the cost of good manufactured will affect the Heriyanto’s MSME in determining the selling price, because the cost of goods manufactured is the main element in determination selling price. Calculation of selling prices according Heriyanto’s MSME is Rp. 18.026/pair or Rp. 360.516/score (Hamer Material) and Rp. 16.790/pair or Rp. 335.791/score (Kavaro material). While the selling price used the Cost Plus Pricing method which is Rp. 18.814/pair or Rp. 376.281/score (Hamer Material) and Rp. 17.578/pair or Rp. 351.556/score (Kavaro material). Keywords : Cost of Goods manufactured, Selling Price, Full Costing, Cost Plus Pricing


2017 ◽  
Vol 9 (1) ◽  
pp. 1
Author(s):  
Erviyani Erviyani ◽  
Makkarennu Makkarennu ◽  
Muhammad Alif Kaimuddin Sahide ◽  
Asar Said Mahbub

This study have purpose to determine the rattan trading channel and rattan trading functions, to know the interests of actors who play a role in every channel of rattan commerce and to know the power relations of each actor in the rattan trading channel. The research was conducted in February 2017 with the research location in Batu Village Pitu Riase Sub-District Sidenreng Rappang Regency. Sampling was done by purposive sampling with farmer sample as many as 5 samples. For the involved trading institutions are determined by a search method in which 3 collectors sample sample and 1 sample of wholesalers. The data used are primary data and secondary data. Method of data analysis used is descriptive analysis to analyze farmer selling price and buying price of intermediary trader and to know the interest and relation of actor who play role in rattan trading channel. The results conclude that there is one trade channel in the research area, namely: farmers - collectors traders - wholesalers. The results of operational efficiency analysis show that the trading system channel is not efficient yet. The reason is the farmers still play a role as the recipient of the price. The level of importance between the actors on the rattan trading channel in Batu Village is different. Of the three elements of power (trust, incentive and coercion) can be concluded that the actors are influential and have the highest power of traders (industry).


Wardah ◽  
2017 ◽  
Vol 18 (1) ◽  
pp. 60
Author(s):  
Syahir Syahir ◽  
Selly Fransiska

Analysis of Journalism Photo of Sinabung Mountain Disaster (Study On SINDOnews.com News Site) was analyzed by using Pierce semiotics that was about sign, object, and interpretant. Data sources were primary data sources (photographs) and secondary data sources (literature that supports primary data such as dictionaries, internet, theses, books). The method used in this study is a qualitative research method that is descriptive analysis, ie research that provides an objective picture, with Pierce analysis of photojournalism. Of the total images posted since April 2, 2015 to May 5, 2015. This study chose 11 representative journalistic photos. Photo journalism classified from the category of preaching photo before Mount Sinabung erupted, when the volcano erupted, the impact of the eruption of Mount Sinabung and the response from the Sinabung disaster. The conclusion of the research showed that 1. From every area rubric, most of the news published was spot news. This can be seen from the rubric of North Sumatera about Sinabung mountain disaster. 2. From the results of Pierce's semiotics analysis on the SINDOnews.com news site about Sinabung mountain disaster, obtained that each photo displayed must have their respective elements, especially for the caption element, should be more.


2017 ◽  
Vol 11 (1) ◽  
pp. 69-96
Author(s):  
Siti Yuliaty Chansa Arfah ◽  
Harianto . ◽  
Suharno .

Penelitian ini bertujuan untuk mengkaji daya saing komoditi kakao di Sulawesi Tengah dan melihat peran pemerintah dalam meningkatkan daya saing komoditi kakao. Data primer berasal dari observasi, wawancara dan kuesioner, sementara data sekunder berasal dari instansi terkait. Metode analisis menggunakan Policy Analysis Matrix (PAM) dan analisis sensitivitas. Penelitian ini menemukan bahwa nilai PCR Kabupaten Parigi Moutong 0,589 dan Kabupaten Sigi 0,396. Sedangkan nilai DRC Kabupaten Parigi Moutong 0,387 dan Kabupaten Sigi 0,319. Hal tersebut mengindikasikan bahwa usahatani komoditi kakao di Sulawesi Tengah memiliki daya saing, namun tidak menguntungkan secara ekonomi karena Sulawesi Tengah menghasilkan biji kakao yang tidak difermentasi akibatnya petani menerima harga rendah. Berdasarkan hasil analisis, pemerintah belum memberikan proteksi terhadap harga biji kakao dalam negeri melalui harga referensi biji kakao sehingga harga biji kakao didaerah penelitian masih tergolong rendah jika dibandingkan dengan harga di pasar internasional. Sementara terhadap input, pemerintah telah memberikan kebijakan subsidi kepada petani, namun implementasinya masih perlu perbaikan terutama terkait penyaluran dan pengelolaan bantuan agar merata. Kajian ini merekomendasikan masih diperlukan kebijakan pemerintah baik terhadap input maupun output untuk meningkatkan produktivitas, menurunkan biaya produksi dan menaikkan harga jual biji kakao, sehingga dapat meningkatkan daya saing biji kakao. The purpose of this study is to assess the competitiveness of cocoa in Central Sulawesi and to investigate the role of government in improving the competitiveness of cocoa. The primary data were generated through observation, interviews and some questionnaires. The secondary data were obtained from the agency or the institution related to the research. This study uses the Policy Analysis Matrix (PAM) and sensitivity analysis. The study found that the PCR value for Parigi Moutong district was 0.589 and Sigi district was 0.396. While, the DRC value for Parigi Moutong district was 0.387 and Sigi district was 0.319. This indicates that cocoa beans farming in Central Sulawesi has competitiveness, but not economically beneficial because Central Sulawesi produces unfermented cocoa beans consequently farmers receive low prices. Based on the results of the government's impact on output analysis, the government did not provide protection for domestic cocoa seed prices through the reference price of cocoa beans, consequently the price of domestic cocoa beans, particularly in the research area, was relatively low compared to the price of cocoa beans at the international market. Seen from the government policy on inputs, the government have provided subsidies to farmers but they need to improve the distribution and management of aid to be evenly distributed. It is necessary to set up good government policy on inputs and outputs in order to increase cocoa seed productivity, decrease production cost and increase the price which simultaneously can improve its competitiveness in the research location.


Author(s):  
Seeni Mohamed Aliff

This paper will examine the impact of PR electoral systems in a divided society. This research will explore the strength and weakness of the current electoral system and institutional design of Sri Lanka and will recommend changes to decrease the risk of minority exclusion in decision making and ethnic violence. The objectives of this research are to examine the character of the merits and demerits of the PR, and to investigate and assess the impacts of the PR in the multi ethnic societies of Sri Lanka. The study is a qualitative case study, and primary and secondary data sources have been employed to gather relevant data. The My Fieldwork was conducted in Sri Lanka, with the intention of gaining a better and more thorough understanding of the current situation. The interviews conducted were as such not structured or semi-structured, due to the interviewees’ varying professional background and institutional affiliation. Accordingly, unstructured interviews, as well as informal conversations and meetings, were conducted throughout Sri Lanka.


2021 ◽  
Vol 9 (2) ◽  
pp. 393
Author(s):  
Syahrizal Syahrizal

The ideas of al-Qabisi on the physical punishment method for the students now tend to be poorly comprehended, acknowledged, and implemented by educators in the educational institution system. It is almost certain that the study of the physical punishment method is still limited to theory and knowledge without giving application in the reality of life. This research aimed to analyze the principle of physical punishment for the students, illustrate the terms, as well as the objectives of the punishment, and the impact on the psychological and physical of students. Based on library research and descriptive, deductive, and content analysis of primary and secondary data sources, the result of the research showed that according to al-Qabisi, there are six principles of physical punishment, four conditions that must be considered in the provision of physical punishment, five purposes of giving physical punishment for them, and imposition of physical punishment for them according to al-Qabisi harms the physical and psychological of students.


Society ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 187-204
Author(s):  
Andy Alfatih ◽  
Diana Dewi Sartika ◽  
Dyah Hapsari Eko Nueraheni

One of the efforts to obtain and increase village revenue was by running a business through a village-owned enterprise (VOEs). A policy was needed for utilizing village resources in establishing a village-owned enterprise. The Musi Rawas Regency Government had made a policy, namely Musi Rawas Regency Regional Regulation Number 10 of 2013, concerning Guidelines for the Establishment and Management of Village-Owned Enterprises (VOEs). Villages of Musi Rawas Regency had implemented this regulation. This research aimed to evaluate the implementation of this regional regulation. This research method is descriptive quantitative comprises a sample survey and descriptive analysis indicators resulting from the sample survey. The population of this research was 174 Village-Owned Enterprises (VOEs/BUMDes) in Musi Rawas Regency. At the same time, the sample was 64 VOEs which was taken by referring to the Slovin formula. There were primary data and secondary ones. Primary data came mainly from the questionnaire and field observation. Meanwhile, secondary data were sourced from documents, such as archives and reports. Data were analyzed by descriptive technique. The descriptive technique was done by displaying data, assessing them, delivering argument, quoting theory for justification and confirmation, and concluding. Implementing the Regional Regulation concerning Guidelines for the Establishment and Management of Village-Owned Enterprises (VOEs) was successful. This could be seen from several indicators, refers to Ripley & Franklin (1986), namely: 1) There existed compliance of policy implementers towards the content of the regional regulation. The degree of compliance was high and was in a good category. 2) The establishment and management of VOEs (the smoothness of routine functions) were also high and classified as good, and 3) The performance of the management of VOEs was also good. The impact of policy implementation (regional regulation of Musi Rawas Regency) was positive (good).


Author(s):  
Grace Burleson ◽  
Jesse Austin-Breneman

Abstract Over the past 50 years, researchers have repeatedly proposed the establishment of a new interdisciplinary engineering field in Engineering for Global Development (EGD), whose analytical tools and design processes result in positive social impacts and poverty alleviation in a global development context. Within each discipline and research area, a growing body of work has sought to systematically create scientific knowledge in this area. However, a recent network analysis of Human-Centered Design plus Development research indicates that sub-communities are not collaborating at a high level and therefore the overall research agenda may lack cohesion. This paper presents a descriptive analysis of EGD research within mechanical engineering along four dimensions through a systematic literature review and secondary data analysis. Results from the review and a Latent Dirichlet Allocation model indicate EGD work in mechanical engineering draws upon research methodologies from a number of other fields and has low levels of consensus on technical terminology. These results suggest consensus in the broader interdisciplinary EGD field should be examined.


2016 ◽  
Vol 4 (1) ◽  
pp. 7
Author(s):  
Bayu Dwitya Sukmana ◽  
Ida Bagus Suryawan

ABSTRACT The development of tourism in essence to develop and utilize the destination and tourist attraction in the form of a beautiful natural resources, the diversity of flora and fauna, cultural, historical, archaeological objects and cultural diversity. In order to achieve the objectives of tourism development of the Development of tourism should be directed to the use of natural resources, the greater the resources you have, the greater the hope for achieving development goals and the development of tourism. Based on studies that revealed the problems, how the carrying capacity of the physical environment on the feasibility of tourism attraction tirta gangga, Karangasem regency Ababi village? To unravel this issue, this study uses primary and secondary data sources, whereas the type of data used is also quantitative and qualitative data. Methods of collecting data through observation, interviews, and literary study. Analysis of the data used is a qualitative descriptive analysis. The results showed that, tourism development in the tourist destination, has an influence on the physical environment. In terms of its physical environment, support the building in a popular tourist destination such as supporting the existence of a tourist destination has been organized than previous years.


Sign in / Sign up

Export Citation Format

Share Document