Formulation and Evaluation of Gastroretentive Nanoparticles of Repaglinide

2014 ◽  
Vol 7 (1) ◽  
pp. 2363-2370
Author(s):  
P M Jamkar ◽  
K N Gujar ◽  
S B Nemmaniwar ◽  
N B Kulkarni
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
Research Work ◽  
Crosslinking Agent ◽  
Controlled Drug Release ◽  
Dsc Studies ◽  
Ft Ir ◽  
Novel Drug

Controlled drug release system is one of the most favourable technique of novel drug delivery system owing to its reproducibility and ease of formulation. Nanotechnology is very useful for controlling the drug release and thus improving the pharmacokinetic and pharmacodynamic properties of the drug. The technique improves patient compliance by reducing both dose and the frequency of administration and thus minimizing the local as well as systemic toxic effects. The aim of the present research work was to formulate and evaluate gastroretentive nanoparticles of Repaglinide, an anti-diabetic drug by using the ionotropic gelation method. Repaglinide has a very short half-life of 1 hour with bioavailability 56%. Sustained release mucoadhesive nanoparticles of Repaglinide were prepared to increase the drug residence time in gastrointestinal tract and thus improving the bioavailability of drug. The mucoadhesive nanoparticles were prepared by using chitosan and sodium alginate as polymers; calcium chloride as the crosslinking agent. Different formulations were prepared with varying concentrations of chitosan and sodium alginate in order to achieve the optimum particle size and maximum encapsulation efficiency. The particle size of nanoparticles was found to be in the range of 300 nm to 756 nm. Drug encapsulation efficiency ranged between 56% to 80% with controlled drug release upto 88% in phosphate buffer pH 7.4 and 75% drug release in 0.1N HCl in 12 hrs. FT-IR and DSC studies showed that the drug and polymers were compatible. The results of swelling study and bioadhesive strength indicated that optimized formulation exhibited excellent mucoadhesive properties

Characterization and Screening of a Novel Multiparticulate Pulsatile Delivery of Aceclofenac

2016 ◽  
Vol 9 (5) ◽  
pp. 3494-3501
Author(s):  
Bipul Nath ◽  
Santimoni Saikia
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Alginate Beads ◽  
In Vitro Drug Release ◽  
Dsc Studies ◽  
Ft Ir ◽  
Lag Period ◽  
Pulsatile Delivery ◽  
Ca Alginate

In the present investigation, sodium alginate based multiparticulate system overcoated with time and pH dependent polymer was studied in the form of oral pulsatile system to achieve pulsatile with sustained release of aceclofenac for chronotherapy of rheumatoid arthritis seven batches of micro beads with varying concentration of sodium alginate (2-5 %) were prepared by ionotropic-gelation method using CaCl2 as cross-linking agent. The prepared Ca-alginate beads were coated with 5% Eudragit L100 and filled into pulsatile capsule with varying proportion of plugging materials. Drug loaded microbeads were investigated for physicochemical properties and drug release characteristics. The mean particle sizes of drug-loaded microbeads were found to be in the range 596±1.1 to 860 ± 1.2 micron and %DEE in the range of 65-85%. FT-IR and DSC studies revealed the absence of drug polymer interactions. The release of aceclofenac from formulations F1 to F7 in buffer media (pH 6.8) at the end of 5h was 65.6, 60.7, 55.7, 41.2, 39.2, 27 and 25% respectively. Pulsatile system filled with eudragit coated Ca-alginate microbeads (F2) showed better drug content, particle size, surface topography, in-vitro drug release in a controlled manner. Different plugging materials like Sterculia gum, HPMC K4M and Carbopol were used in the design of pulsatile capsule. The pulsatile system remained intact in buffer pH 1.2 for 2 hours due to enteric coat of the system with HPMCP. The enteric coat dissolved when the pH of medium was changed to 7.4. The pulsatile system developed with Sterculia gum as plugging material showed satisfactory lag period when compared to HPMC and Carbopol.

scholarly journals Formulation and evaluation of carvedilol microcapsules using Eudragit NE30D and sodium alginate

2013 ◽  
Vol 49 (4) ◽  
pp. 889-901 ◽  
Author(s):  
Trishna Bal ◽  
Shubhranshu Sengupta ◽  
Padala Narasimha Murthy
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Kinetic Equations ◽  
Oral Feeding ◽  
Primary Role

Inclusion complexes of carvedilol(CR) with hydroxyl propyl beta-cyclodextrin (HPBCD) was prepared using co-grinding technique. Then, the inclusion complex was microencapsulated using combinations of Eudragit NE30D (EU) and sodium alginate (SA) utilizing orifice gelation technique. The formulations were analysed by using Scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), Differential scanning Calorimetry (DSC) and X-ray diffractometer (XRD) and also evaluated for particle size, encapsulation efficiency, production yield, swelling capacity, mucoadhesive properties, zeta potential and drug release. The microcapsules were smooth and showed no visible cracks and extended drug release of 55.2006% up to 12 hours in phosphate buffer of pH 6.8, showing particle size within the range of 264.5-358.5 µm, and encapsulation efficiency of 99.337±0.0100-66.2753±0.0014%.The in vitro release data of optimized batch of microcapsules were plotted in various kinetic equations to understand the mechanisms and kinetics of drug release, which followed first order kinetics, value of "n" is calculated to be 0.459 and drug release was diffusion controlled. The mice were fed with diet for inducing high blood pressure and the in vivo antihypertensive activity of formulations was carried out administering the optimized formulations and pure drug separately by oral feeding and measured by B.P Monwin IITC Life Science instrument and the results indicated that the bioavailability of carvedilol was increased both in vitro and in vivo with the mucoadhesive polymers showing primary role in retarding the drug release.

scholarly journals Liposomal and Ethosomal Gels for the Topical Delivery of Anthralin: Preparation, Comparative Evaluation and Clinical Assessment in Psoriatic Patients

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 446 ◽  
Author(s):  
Dina Fathalla ◽  
Eman M. K. Youssef ◽  
Ghareb M. Soliman
Keyword(s):  
Drug Release ◽  
Encapsulation Efficiency ◽  
Release Kinetics ◽  
Severity Index ◽  
Scanning Calorimetry ◽  
Drug Encapsulation ◽  
Dsc Studies ◽  
Significant Difference ◽  
Ft Ir ◽  
Drug Encapsulation Efficiency

To enhance anthralin efficacy against psoriasis and reduce its notorious side effects, it was loaded into various liposomal and ethosomal preparations. The nanocarriers were characterized for drug encapsulation efficiency, size, morphology and compatibility between various components. Optimum formulations were dispersed in various gel bases and drug release kinetics were studied. Clinical efficacy and safety of liposomal and ethosomal Pluronic®F-127 gels were evaluated in patients having psoriasis (clinicaltrials.gov identifier is NCT03348462). Safety was assessed by recording various adverse events. Drug encapsulation efficiency ≥97.2% and ≥77% were obtained for liposomes and ethosomes, respectively. Particle sizes of 116 to 199 nm and 146 to 381 nm were observed for liposomes and ethosomes, respectively. Fourier-Transform infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) studies confirmed the absence of interaction between anthralin and various nanocarrier components. Tested gel bases showed excellent ability to sustain drug release. At baseline, the patients had a median Psoriasis Area and Severity Index (PASI) of 3.4 for liposomes and 3.6 for ethosomes without significant difference. After treatment, mean PASI change was −68.66% and −81.84% for liposomes and ethosomes, respectively with a significant difference in favor of ethosomes. No adverse effects were detected in both groups. Anthralin ethosomes could be considered as a potential treatment of psoriasis.

Solubility Enhancement of Poorly Water-Soluble Antifungal Drug Acyclovir by Nanocrystal Formulation Approach

2018 ◽  
Vol 11 (2) ◽  
pp. 4036-4042
Author(s):  
Prakash Goudanavar ◽  
Ankit Acharya ◽  
Vinay C.H
Keyword(s):  
Chemical Interaction ◽  
Research Work ◽  
Antiviral Drug ◽  
In Vitro Release ◽  
Oral Route ◽  
Water Soluble ◽  
Precipitation Method ◽  
Dsc Studies ◽  
Ft Ir

Administration of an antiviral drug, acyclovir via the oral route leads to low and variable bioavailability (15-30%). Therefore, this research work was aimed to enhance bioavailability of acyclovir by nanocrystallization technique. The drug nanocrystals were prepared by anti-solvent precipitation method in which different stabilizers were used. The formed nanocrystals are subjected to biopharmaceutical characterization including solubility, particle size and in-vitro release. SEM studies showed nano-crystals were crystalline nature with sharp peaks. The formulated drug nanocrystals were found to be in the range of 600-900nm and formulations NC7 and NC8 showed marked improvement in dissolution velocity when compared to pure drug, thus providing greater bioavailability. FT-IR and DSC studies revealed the absence of any chemical interaction between drug and polymers used. 

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

scholarly journals FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

2018 ◽  
Vol 8 (5) ◽  
pp. 465-474
Author(s):  
S PADMA PRIYA ◽  
AN Rajalakshmi ◽  
P Ilaveni
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Loading ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Polyvinyl Pyrrolidone ◽  
Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods:  Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine  formulations were formulated and  evaluated for  possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro  drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

scholarly journals Formulation and characterization of flurbiprofen loaded microsponge based gel for sustained drug delivery

2019 ◽  
Vol 10 (4) ◽  
pp. 2765-2776
Author(s):  
Naresh Kshirasagar ◽  
Goverdhan Puchchakayala ◽  
Balamurgan K
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Diffusion Method ◽  
Skin Delivery ◽  
Sustained Action ◽  
Release Studies ◽  
Ft Ir ◽  
Polymer Ratio

The new investigation in this present work is to develop microsponges constructed novel drug delivery system for sustained action of Flurbiprofen. Quai-emulsion solvent diffusion method was engaged using Ethyl cellulose and Eudragit RS100 with drug: polymer ratio for development of microsponges. For optimization purposes, several factors are considered in the investigation. Several evaluation studies for the formed microsponges were carried out FT-IR, SEM, DSC, X-RD, particle size analysis, morphology, drug loading and In vitro drug release studies were carried out. Finally, it was concluded that there is no drug-polymer interaction as per DSC & FT-IR. Encapsulation efficiency, particle size and drug content showed a higher impact on alteration of drug-polymer ratio. SEM studies showed that morphological microsponges are spherical and porous in nature and with the mean particle size of 38.86 μm. The gel loaded with microsponges, were followed by In vitro and Ex vivo drug release studies by modified Franz diffusion cell. Skin delivery of optimized formulation enhanced the drug residence time and maintained therapeutic concentration for an extended period of time, which is possible to show sustained action of the drug.

scholarly journals Sodium Alginate Nanoparticles of Isoniazid: Preparation and Evaluation

2019 ◽  
Vol 11 (06) ◽  
Author(s):  
Sumit Kumar ◽  
Dinesh Chandra Bhatt
Keyword(s):  
Particle Size ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Average Particle ◽  
In Vitro Drug Release ◽  
Ionotropic Gelation ◽  
Preparation And Evaluation

Fabrication and evaluation of the Isoniazid loaded sodium alginate nanoparticles (NPs) was main objective of current investigation. These NPs were engineered using ionotropic gelation technique. The NPs fabricated, were evaluated for average particle size, encapsulation efficiency, drug loading, and FTIR spectroscopy along with in vitro drug release. The particle size, drug loading and encapsulation efficiency of fabricated nanoparticles were ranging from 230.7 to 532.1 nm, 5.88% to 11.37% and 30.29% to 59.70% respectively. Amongst all batches studied formulation F-8 showed the best sustained release of drug at the end of 24 hours.

Fabrication and Evaluation of Mouth Dissolving Strips of Metoclopramide Hydrochloride by Using Novel Film Former

2021 ◽  
pp. 5515-5520
Author(s):  
Hemant A. Deokule ◽  
Smita S. Pimple ◽  
Praveen D. Chaudhari ◽  
Ajit S. Kulkarni
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Systemic Circulation ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Visual Appearance ◽  
Dsc Studies ◽  
Weight Variation ◽  
Metoclopramide Hydrochloride

Fast dissolving strips are used as novel approaches, as it dissolves rapidly in mouth and directly reaches the systemic circulation. In present research work, an attempt has been made to prepare mouth dissolving strips of Metoclopramide hydrochloride by using a novel film former Pullulan by solvent casting method. A33 full factorial design was utilized for the optimization of the effect of independent variables such as the amount of Pullulan, amount of PEF 400, amount of SSG on mechanical properties, and % drug release of strips. The drug compatibility studies using FTIR and DSC studies formulated strips were characterized for their physicochemical parameter like weight variation, visual appearance, folding endurance, thickness, disintegration time, drug content, and in vitro dissolution studies. FTIR and DSC studies revealed that the polymer is compatible with the drug. It was found that the optimum levels of the responses for a fast release strip could be obtained at low levels of Pullulan, PEG400, and SSG. The prepared strip was clear transparent and had a smooth surface. The surface pH was found 4.8 to 5.2 be in the range of to which is close to salivary pH, which indicates that strips may have less potential to irritate the oral mucosa, thereby they are comfortable. The drug release was found to be between 90.94 to 100.5% in 2 min. The in-vitro disintegration time of strips prepared with Pullulan was in the range of 19 to 57 sec. As the concentration of SSG increases the decrease in the disintegration time of strips a decrease. The dissolution rate increased with an increase in the concentration of SSG. Hence, it can be inferred that the fast dissolving oral strips of Metoclopramide hydrochloride may produce rapid action thereby improving bioavailability and enhance the absorption by avoiding the first-pass effect.

scholarly journals Preparation and preclinical evaluation of aceclofenac loaded pectinate mucoadhesive microspheres

2012 ◽  
Vol 2 (1) ◽  
pp. 8 ◽  
Author(s):  
Santanu Chakraborty ◽  
Priyanka Nayak ◽  
Bala Murali Krishna ◽  
Madhusmruti Khandai ◽  
Ashoke Kumar Ghosh
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Polymer Concentration ◽  
Research Work ◽  
In Vivo Studies ◽  
Systemic Absorption ◽  
Cross Linking ◽  
Significant Difference

The aim of the present research work was to fabricate aceclofenac loaded pectinate microspheres by ionic gelation method and evaluate the effect of different cross-linking agents and polymer concentration on particle size, encapsulation efficacy and drug release behavior. It was also investigated that whether this pectinate dosage form was able to target the drug release in intestinal region and prevent the different side effect associated with the drug in stomach or not. It was observed that particle size, encapsulation efficacy and in vitro drug release were largely depended on polymer concentration and cross-linking agents. It was also observed that pectinate microspheres showed excellent pH depended mucoadhesive properties and they were able to restrict the drug release in stomach. <em>In vitro</em> drug release study showed that alminium-pectinate microspheres have more sustaining property as compared to barium-pectinate microspheres. Holm-Sidak multiple comparison analysis suggested a significant difference in measured t<sub>50%</sub> values among all the formulations with same cross-linking agent. In vivo studies revealed that the anti inflammatory and analgesic effects induced by pectinate microspheres were significantly high and prolonged as compared to pure drug. So, pectinate microspheres can be an excellent carrier for targeting the delivery of aceclofenac as well as help in improving the patient compliance by prolonging the systemic absorption.

Sign in / Sign up

Export Citation Format

Share Document