scholarly journals AIDED DESIGN OF TRANSPORT CONTAINERS FOR AIRCRAFT UNITS AND PANELS

2021 ◽  
Vol 23 (1) ◽  
pp. 115-122
Author(s):  
D.V. Yastrebov ◽  
◽  
E.N. Zguralskaya ◽  
D.V. Egorychev ◽  
◽  
...  
Keyword(s):  
Production Costs ◽  
Design And Manufacturing ◽  
Design Documentation ◽  
The Cost ◽  
Aided Design ◽  
Manufacturing Time

The paper describes the automation of the process of developing design documentation for containers for non-standard large-sized aircraft units and panels. The software is described, the use of which can significantly reduce the design and manufacturing time, unify individual elements of the container, which together will lead to a significant reduction in the production costs of the enterprise, as well as to a decrease in the cost of the aircraft.

Improving Design of Cricoid Plastic Gating System Based on Moldflow

2012 ◽  
Vol 472-475 ◽  
pp. 2264-2269
Author(s):  
Dong Po Yang ◽  
Jian Min Han
Keyword(s):  
Weight Ratio ◽  
Economic Benefits ◽  
Production Costs ◽  
Gating System ◽  
Molding Process ◽  
The Poor ◽  
Design And Manufacturing ◽  
High Production ◽  
Poor Ventilation ◽  
The Cost

To solve the problems such as poor ventilation and high production costs in the production of cricoid plastics, we analysis the reasons and look for solutions with Moldflow software to guide the new design and manufacturing of the mould. The poor ventilated structure is changed into a ventilation structure. A poor ventilation structure is changed to a good ventilation structure. Injection weight ratio was reduced from 35% to 15% - 20%, the gating system was improved, the molding process was optimized, ensuring product quality and save the cost, produced good economic benefits.

CAD Of Anticorrosive Protection Of Steel Structures

2019 ◽  
pp. 18-23
Keyword(s):  
Protective Coating ◽  
Computer Aided Design ◽  
Steel Structures ◽  
Cost Effective ◽  
Operating Conditions ◽  
Computational Tool ◽  
Protection Method ◽  
Cost Effective Method ◽  
The Cost ◽  
Aided Design

The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.

Perancangan dan Pembuatan Alat Bantu Meja Putar untuk Mesin Cnc 4 Axis

2016 ◽  
Vol 10 (2) ◽  
pp. 162-171
Author(s):  
Hafid Hafid ◽  
Tatang Sutisna
Keyword(s):  
Processing Time ◽  
Rotary Table ◽  
Engineering Process ◽  
Cnc Machine ◽  
Economical Analysis ◽  
Machining Center ◽  
Design And Manufacturing ◽  
The Cost ◽  
Productivity And Competitiveness

The design and manufacturing of the rotary table with the specification Ø 170 mm (6 inches) for CNC machine 4 axis has been done. The objective of manufacturing a rotary table is to increase the efficiency of CNC machine Hardford 4 axis to be above 80% in line machining center CV. IM’s workshop. The engineering methods was taken, consist of: working preparation, manufacturing of working drawing, engineering process, the manufacturing and testing. The prototype has been tested and operated, the resulting of increasing productivity of which were as follows: the process of assembling was increased to be 3 time ( before 1 time) and processing time for a specific case reduced from 5 hours to 3 hours, number of operators for the case of assembling the rotary reduced to 1 person (before 4 persons), safety and security become to be better. The results show increased efficiency of CNC machine Hardford, from under 50% to be above 80%. Based on the economical analysis obtained by the cost of good sold (C.G.S) of the rotary table is IDR 34.060.000. The results presented in this paper is expected to be case study for developing a business of the metal and engineering SMEs domestic to the effort of improving efficiency, quality, productivity and competitiveness in global market.ABSTRAKPerancangan dan pembuatan alat bantu meja putar (rotary table) dengan spesifikasi teknis Ø 170 mm (6 inci) untuk mesin CNC 4 axis telah dilakukan. Tujuan pembuatan rotary table adalah untuk meningkatkan efisiensi mesin CNC Hardford 4 axis di atas 80% pada line machining center Bengkel CV. IM. Metode rancang bangun yang dilakukan, meliputi: persiapan kerja, pembuatan gambar kerja, proses engineering, pembuatan dan uji coba. Prototip tersebut telah diuji coba dan dioperasikan dengan hasil peningkatan produktivitas sebagai berikut: proses pengerjaan bongkar pasang meningkat menjadi 3 kali (sebelumnya 1 kali) dan waktu pengerjaan untuk kasus tertentu berkurang dari 5 jam menjadi 3 jam, jumlah operator untuk kasus bongkar pasang rotary berkurang menjadi 1 orang (sebelumnya 4 orang), keselamatan kerja dan keamanan menjadi lebih baik. Hasil peningkatan berupa efisiensi mesin CNC Hardford 4 axis dari sebelumnya di bawah 50% menjadi di atas 80%. Berdasarkan hasil perhitungan analisis ekonomi diperoleh harga pokok produksi (HPP) alat bantu meja putar adalah sebesar Rp. 34.060.000. Bahasan ini diharapkan menjadi contoh kasus bagi pengembangan usaha IKM logam dan mesin dalam negeri untuk meningkatkan efisiensi, mutu, produktivitas dan keunggulan daya saing di pasar global.Kata kunci: alat bantu meja putar, mesin CNC, harga pokok produksi

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals Monitoring the technological processes in the wood industry in order to make them more efficient through technical overhauling

2019 ◽  
Vol 290 ◽  
pp. 02007
Author(s):  
Radu Dan Paltan ◽  
Cristina Biriş ◽  
Loredana Anne-Marie Rădulescu
Keyword(s):  
Automotive Industry ◽  
Operating Mode ◽  
Solid Wood ◽  
Production Costs ◽  
Operating Costs ◽  
Future Research ◽  
Wood Industry ◽  
Research Article ◽  
State Of Research ◽  
The Cost

Of many techniques that are used to optimize production and costs, the studies conducted within a profile company lead to our choice for testing the 6Sigma method (the most used method in the automotive industry) in view of the economic efficiency applied in the wood Industry company. This method measures how many flaws exist in a process and determines in a systematic way how to improve it by technical overhauling and eliminating or minimizing the process for efficiency. This research article aims to study the state of research on the optimization of the production process through technical overhauling for panels reconstituted from solid wood and ways to make production more efficient by cutting costs through technical overhauling. From preliminary research, we estimate that all the items founded and others that will result from further research will result in a significant decrease in production costs that are reflected in the cost of the finished product and consequently in increasing the yield of the company by maximizing its profit. At the same time it may be the basis of future research studies in the field. The easier it is to maximize profits, the lower the operating costs are and the higher recovery rate of investments are, that will result a change in the operating mode: “working smarter not harder”.

scholarly journals Bioethanolic yeasts from dung beetles: tapping the potential of extremophilic yeasts for improvement of lignocellulolytic feedstock fermentation

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Anita Ejiro Nwaefuna ◽  
Karl Rumbold ◽  
Teun Boekhout ◽  
Nerve Zhou
Keyword(s):  
Treatment Process ◽  
Dung Beetles ◽  
Production Costs ◽  
Industrial Wastes ◽  
Major Drawback ◽  
Renewable Fuel ◽  
Extreme Stress ◽  
Pre Treatment ◽  
The Cost ◽  
Simultaneous Saccharification

AbstractBioethanol from abundant and inexpensive agricultural and industrial wastes possesses the potential to reduce greenhouse gas emissions. Bioethanol as renewable fuel addresses elevated production costs, as well as food security concerns. Although technical advancements in simultaneous saccharification and fermentation have reduced the cost of production, one major drawback of this technology is that the pre-treatment process creates environmental stressors inhibitory to fermentative yeasts subsequently reducing bioethanol productivity. Robust fermentative yeasts with extreme stress tolerance remain limited. This review presents the potential of dung beetles from pristine and unexplored environments as an attractive source of extremophilic bioethanolic yeasts. Dung beetles survive on a recalcitrant lignocellulose-rich diet suggesting the presence of symbiotic yeasts with a cellulolytic potential. Dung beetles inhabiting extreme stress environments have the potential to harbour yeasts with the ability to withstand inhibitory environmental stresses typically associated with bioethanol production. The review further discusses established methods used to isolate bioethanolic yeasts, from dung beetles.

The Application of Computer Techniques in the Design and Manufacturing of Timing Scrolls

1993 ◽  
Vol 207 (2) ◽  
pp. 99-108
Author(s):  
L Q Tang ◽  
D N Moreton
Keyword(s):  
Dynamic Characteristic ◽  
Computer Aided Design ◽  
Numerical Control ◽  
Feeding Mechanism ◽  
Control Techniques ◽  
Computer Aided ◽  
Design And Manufacturing ◽  
Manufacturing Techniques ◽  
Aided Design ◽  
Design And Manufacture

The timing scroll is an important feeding mechanism on packaging lines. As packaging line speeds have increased and the shape of containers has become more diverse, the techniques used for the design and manufacture of such timing scrolls have become critical for successful packaging line performance. Since 1980, various techniques have evolved to improve scroll design, manufacture and the associated line performance. In recent years, as CAD (computer aided design), CAM (computer aided manufacture) and CNC (computer numerical control) techniques have evolved, scroll design and manufacturing techniques began to be linked with computer techniques. In this paper, a scroll design and manufacturing package is presented which can be run on a minicomputer, such as a μ-VAX on an IBM PC clone. This scroll package can produce a timing scroll for any type of container with a correct pocket shape and good dynamic characteristic. Tests using carefully chosen containers have been made using this package and the results indicate that the scrolls obtained by this package have the correct pocket shape and good line performance. However, the design of a good pick-up geometry for some container shapes remains a problem.

Unequal Treatment of Identical Agents in Cournot Equilibrium

1999 ◽  
Vol 89 (3) ◽  
pp. 585-604 ◽  
Author(s):  
Stephen W Salant ◽  
Greg Shaffer
Keyword(s):  
Marginal Cost ◽  
Consumer Surplus ◽  
Production Costs ◽  
Cournot Equilibrium ◽  
Unequal Treatment ◽  
Marginal Costs ◽  
Second Stage ◽  
Policy Debates ◽  
The Cost ◽  
Antitrust Regulation

Oligopoly models where prior actions by firms affect subsequent marginal costs have been useful in illuminating policy debates in areas such as antitrust regulation, environmental protection, and international competition. We discuss properties of such models when a Cournot equilibrium occurs at the second stage. Aggregate production costs strictly decline with no change in gross revenue or gross consumer surplus if the prior actions strictly increase the variance of marginal costs without changing the marginal-cost sum. Therefore, unless the cost of inducing second-stage asymmetry more than offsets this reduction in production costs, the private and social optima are asymmetric. (JEL D43, L13, L40)

Sign in / Sign up

Export Citation Format

Share Document