scholarly journals Experimental Evaluation of Machine learning based MIMO-OFDM System for Optimal PAPR and BER

2021 ◽  
Vol 16 ◽  
pp. 315-327
Author(s):  
Y. K Shobha ◽  
H. G Rangaraju

The hypothetically convenient structure is the Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) technique that is employed for upcoming generations in wireless communication systems. Some of the benefits offered by MIMO-OFDM are enhanced spatial multiplexing, reliability and network throughput, and so on. Due to the integration of spatial antenna that is based on multi-stream, the problems which are related to significantly high power takes place in the system of OFDM and provides complex processing strategies. Some of the popularly known systems that are used for standardizing the Peak to average power ratio (PAPR) are partial transmit sequences (PTS), adoptive tone reservation (ATR), probabilistic mapping, and clipping which are required to be truncated and aims for minimizing the operational cost. The framework of hybrid Selective Mapping (SLM)-PTS proposed in this paper minimizes the operational cost by integrating strategies of PTS and SLM. A reduction approach that is suitable for PAPR and BER are chosen for optimization purposes depending on the statistical threshold constraint of PAPR and Bit Error Rate (BER). Thus, the system preferred with the help of the machine learning technique demonstrates the efficiency in implementing a generalized strategy to evaluate a low complexity MIMO-OFDM model. Ultimately, with the help of the PAPR and BER techniques-driven from value bound the performance of the error rate is evaluated in this framework that interactively changes from one technique.

2019 ◽  
Vol 8 (2) ◽  
pp. 4347-4353

Multiple Input Multiple Output Orthogonal Frequency Division Multiplexing (MIMO OFDM) is a key technology for contemporary communication systems due to its spectral efficiency, higher data rates, better diversity gain, good link reliability and both inter symbol interference (ISI) and multipath fading free transmission. However, due to the presence of OFDM, MIMO-OFDM suffers from high peak to average power ratio (PAPR). Even though, several schemes are available to mitigate PAPR, there is no standard solution. Selective Mapping (SLM) significantly reduces the PAPR in OFDM systems at the cost of computational complexity (CC). The CC of SLM can be reduced by proper design of SLM. This paper considers a low complexity SLM (LC SLM) scheme in which both the CC and length of the index of selected phase sequence are significantly reduced. The PAPR of an SLM-OFDM depends on the number of subcarriers in OFDM, the number of candidate blocks in SLM and selected phase sequence and this paper investigate various phase sequences and analyses their PAPR performance. Simulation results show the superior performance of Riemann sequence over the other phase sequences.


2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Lahcen Amhaimar ◽  
Saida Ahyoud ◽  
Ali Elyaakoubi ◽  
Abdelmoumen Kaabal ◽  
Kamal Attari ◽  
...  

The transceiver combination technology, of orthogonal frequency division multiplexing (OFDM) with multiple-input multiple-output (MIMO), provides a viable alternative to enhance the quality of service and simultaneously to achieve high spectral efficiency and data rate for wireless mobile communication systems. However, the high peak-to-average power ratio (PAPR) is the main concern that should be taken into consideration in the MIMO-OFDM system. Partial transmit sequences (PTSs) is a promising scheme and straightforward method, able to achieve an effective PAPR reduction performance, but it requires an exhaustive search to find the optimum phase factors, which causes high computational complexity increased with the number of subblocks. In this paper, a reduced computational complexity PTS scheme is proposed, based on a novel swarm intelligence algorithm, called fireworks algorithm (FWA). Simulation results confirmed the adequacy and the effectiveness of the proposed method which can effectively reduce the computation complexity while keeping good PAPR reduction. Moreover, it turns out from the results that the proposed PTS scheme-based FWA clearly outperforms the hottest and most important evolutionary algorithm in the literature like simulated annealing (SA), particle swarm optimization (PSO), and genetic algorithm (GA).


YMER Digital ◽  
2021 ◽  
Vol 20 (12) ◽  
pp. 856-866
Author(s):  
Malleswari Akurati ◽  
◽  
Satish Kumar Pentamsetty ◽  
Satya Prasad Kodati ◽  
◽  
...  

Orthogonal Frequency Division Multiplexing (OFDM) contribute high data rates in current as well as future wireless communication systems but it aches from high Peak to Average Power Ratio (PAPR). But this high PAPR makes the High-Power Amplifier (HPA) complex which increases the cost of it and leads to the drawbacks like Inter Carrier Interference (ICI) and rise in out of band radiation. Even though many techniques are there to decrease the complexity of HPA by reducing the PAPR, Selected Mapping (SLM) and the Partial Transmit Sequence (PTS) provides less PAPR with low complexity. In this paper, both PTS and SLM are combined with Discrete Sine Transform (DST) and their PAPR and efficiencies are also compared with OFDM signal. The proposed hybrid DST-PTS and DST-SLM provides less PAPR compared to OFDM, SLM and PTS techniques with low complexity. Also, the bit error rate for DST-SLM and DST-PTS techniques are compared for different values of SNR. In future wireless communication systems, these proposed techniques can be used as they provide less bit error rate and less PAPR with low complexity


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajay Kumar Yadav ◽  
Pritam Keshari Sahoo ◽  
Yogendra Kumar Prajapati

Abstract Orthogonal frequency division multiplexing (OFDM) based massive multiuser (MU) multiple input multiple output (MIMO) system is popularly known as high peak-to-average power ratio (PAPR) issue. The OFDM-based massive MIMO system exhibits large number of antennas at Base Station (BS) due to the use of large number of high-power amplifiers (HPA). High PAPR causes HPAs to work in a nonlinear region, and hardware cost of nonlinear HPAs are very high and also power inefficient. Hence, to tackle this problem, this manuscript suggests a novel scheme based on the joint MU precoding and PAPR minimization (PP) expressed as a convex optimization problem solved by steepest gradient descent (GD) with μ-law companding approach. Therefore, we develop a new scheme mentioned to as MU-PP-GDs with μ-law companding to minimize PAPR by compressing and enlarging of massive MIMO OFDM signals simultaneously. At CCDF = 10−3, the proposed scheme (MU-PP-GDs with μ-law companding for Iterations = 100) minimizes the PAPR to 3.70 dB which is better than that of MU-PP-GDs, (iteration = 100) as shown in simulation results.


2016 ◽  
Vol 4 (1) ◽  
pp. 150-163 ◽  
Author(s):  
Rizky Pratama Hudhajanto ◽  
I Gede Puja Astawa ◽  
Amang Sudarsono

Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) is the most used wireless transmission scheme in the world. However, its security is the interesting problem to discuss if we want to use this scheme to transmit a sensitive data, such as in the military and commercial communication systems. In this paper, we propose a new method to increase the security of MIMO-OFDM system using the change of location of fake subcarrier. The fake subcarriers’ location is generated per packet of data using Pseudo Random sequence generator. The simulation results show that the proposed scheme does not decrease the performance of conventional MIMO-OFDM. The attacker or eavesdropper gets worse Bit Error Rate (BER) than the legal receiver compared to the conventional MIMO-OFDM system.


Author(s):  
Tahreer Mahmood ◽  
Seshadri Mohan

Multiple-input multiple-output technology together with orthogonal frequency division multiplexing (MIMO-OFDM) is an effective technique to combat multi-channel fading and to improve bandwidth efficiency. Simultaneously, it also increases the system's ability to provide reliable transmission. However, the main disadvantage of OFDM is the high peak-to-average-power ratio (PAPR), which, if not mitigated, will negatively impact practical applications. The high PAPR increases complexity and Bit Error Rate. In this research, the authors investigate the factors influencing the PAPR performance of both OFDM and MIMO-OFDM systems. The objective of this research is to make researchers in this field become familiar with this problem as well as to impart an understanding of the factors that influence PAPR. In this study, the authors classify the factors that impact PAPR into modulation schemes and a number of sub-carriers. These parameters influence the PAPR performance have been analyzed and simulated by using MATLAB. It is observed that the numbers of sub-carriers have a great effect on the PAPR performance. However, modulation schemes can have a small effect on PAPR performance.


2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Kasturi Vasudevan ◽  
A. Phani Kumar Reddy ◽  
Gyanesh Kumar Pathak ◽  
Shivani Singh

Detecting the presence of a valid signal is an important task of a telecommunication receiver. When the receiver is unable to detect the presence of a valid signal, due to noise and fading, it is referred to as an erasure. This work deals with the probability of erasure computation for orthogonal frequency division multiplexed (OFDM) signals used by multiple input multiple output (MIMO) systems. The theoretical results are validated by computer simulations. OFDM is widely used in present day wireless communication systems due to its ability to mitigate intersymbol interference (ISI) caused by frequency selective fading channels. MIMO systems offer the advantage of spatial multiplexing, resulting in increased bit-rate, which is the main requirement of the recent wireless standards like 5G and beyond.


2011 ◽  
Vol 2011 ◽  
pp. 1-4 ◽  
Author(s):  
Zhen-dong Zhang ◽  
Bin Wu ◽  
Yu-mei Zhou

The combination of multiple-input multiple-output (MIMO) signal processing with orthogonal frequency-division multiplexing (OFDM) technique is one favored solution in wireless communication systems for enhancing data rate. However, the computational complexity is also linear increased with the number of data streams. Generally, multiple finite impulse response (FIR) interpolations and decimations are added to solve the multiple data streams in a MIMO OFDM system, which cause a large increase in the hardware cost. In this paper, two multipath pipelined polyphase structures for FIR interpolation and decimation to efficiently deal with the simultaneous multiple data streams are proposed. According to the proposed structures, M simultaneous data streams can be supported in the M-component polyphase interpolation or decimation with only one set of computation units. Implementation examples show that up to 56% reduction of silicon area can be obtained over the traditional polyphase structures.


2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Xiaoming Chen ◽  
Hua Wang ◽  
Wei Fan ◽  
Yaning Zou ◽  
Andreas Wolfgang ◽  
...  

The effects of oscillator phase noises (PNs) on multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems are studied. It is shown that PNs of common oscillators at the transmitter and at the receiver have the same influence on the performance of (single-stream) beamforming MIMO-OFDM systems, yet different influences on spatial multiplexing MIMO-OFDM systems with singular value decomposition (SVD) based precoding/decoding. When each antenna is equipped with an independent oscillator, the PNs at the transmitter and at the receiver have different influences on beamforming MIMO-OFDM systems as well as spatial multiplexing MIMO-OFDM systems. Specifically, the PN effect on the transmitter (receiver) can be alleviated by having more transmit (receive) antennas for the case of independent oscillators. It is found that the independent oscillator case outperforms the common oscillator case in terms of error vector magnitude (EVM).


Sign in / Sign up

Export Citation Format

Share Document