Prediction of Sound Absorption of Stacked Granular Materials for Normal and Oblique Incident Sound Waves

2018 ◽  
Vol 104 (3) ◽  
pp. 464-476 ◽  
Author(s):  
M. Bezemer-Krijnen ◽  
Y. H. Wijnant ◽  
A. de Boer
Keyword(s):  
Granular Materials ◽  
Sound Absorption ◽  
Sound Waves

scholarly journals Bilayer ventilated labyrinthine metasurfaces with high sound absorption and tunable bandwidth

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiayuan Du ◽  
Yuezhou Luo ◽  
Xinyu Zhao ◽  
Xiaodong Sun ◽  
Yanan Song ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Air Flow ◽  
Single Layer ◽  
Sound Waves ◽  
Acoustic Metamaterials ◽  
Sound Barrier ◽  
Free Air ◽  
Relative Bandwidth ◽  
Wide Range ◽  
High Sound

AbstractThe recent advent of acoustic metamaterials offers unprecedented opportunities for sound controlling in various occasions, whereas it remains a challenge to attain broadband high sound absorption and free air flow simultaneously. Here, we demonstrated, both theoretically and experimentally, that this problem can be overcome by using a bilayer ventilated labyrinthine metasurface. By altering the spacing between two constituent single-layer metasurfaces and adopting asymmetric losses in them, near-perfect (98.6%) absorption is achieved at resonant frequency for sound waves incident from the front. The relative bandwidth of absorption peak can be tuned in a wide range (from 12% to 80%) by adjusting the open area ratio of the structure. For sound waves from the back, the bilayer metasurface still serves as a sound barrier with low transmission. Our results present a strategy to realize high sound absorption and free air flow simultaneously, and could find applications in building acoustics and noise remediation.

scholarly journals Non-Wovens as Sound Reducers

2018 ◽  
Vol 55 (2) ◽  
pp. 64-76
Author(s):  
D. Belakova ◽  
A. Seile ◽  
S. Kukle ◽  
T. Plamus
Keyword(s):  
Absorption Coefficient ◽  
Surface Density ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Sound Insulation ◽  
Material Structure ◽  
Sound Transmission Loss ◽  
Sound Waves ◽  
Frequency Range

Abstract Within the present study, the effect of hemp (40 wt%) and polyactide (60 wt%), non-woven surface density, thickness and number of fibre web layers on the sound absorption coefficient and the sound transmission loss in the frequency range from 50 to 5000 Hz is analysed. The sound insulation properties of the experimental samples have been determined, compared to the ones in practical use, and the possible use of material has been defined. Non-woven materials are ideally suited for use in acoustic insulation products because the arrangement of fibres produces a porous material structure, which leads to a greater interaction between sound waves and fibre structure. Of all the tested samples (A, B and D), the non-woven variant B exceeded the surface density of sample A by 1.22 times and 1.15 times that of sample D. By placing non-wovens one above the other in 2 layers, it is possible to increase the absorption coefficient of the material, which depending on the frequency corresponds to C, D, and E sound absorption classes. Sample A demonstrates the best sound absorption of all the three samples in the frequency range from 250 to 2000 Hz. In the test frequency range from 50 to 5000 Hz, the sound transmission loss varies from 0.76 (Sample D at 63 Hz) to 3.90 (Sample B at 5000 Hz).

scholarly journals EFFECT OF POROUS STRUCTURE ON SOUND ABSORPTION OF CELLULAR CONCRETE

2020 ◽  
Vol 3 (2) ◽  
pp. 5-18 ◽  
Author(s):  
R.S. Fedyuk ◽  
A. Baranov ◽  
Y.H. Mugahed Amran
Keyword(s):  
Open Porosity ◽  
Sound Absorption ◽  
Concrete Mixture ◽  
Sound Waves ◽  
Foam Concrete ◽  
Mechanical Adhesion ◽  
The Matrix ◽  
Reduce Shear Stress ◽  
The Mathematical Model ◽  
Cellular Concrete

the compositions of gas and foam concrete with improved acoustic characteristics were developed. The optimal form of porosity, which contributes to the absorption of sound waves, both in the range of audible frequencies and at infrasonic and ultrasonic frequencies, is revealed. The mathematical model for designing sound-absorbing concrete was improved, taking into account both the porosity of the composite and the influence of the porous aggregate. The laws of synthesis of aerated concrete and foam concrete are established, which consist in optimizing the processes of structure formation due to the use of a polymineral cement-ash binder and blowing agent. The composition of the composite intensifies the process of hydration of the system, which leads to the synthesis of a polymineral heterodisperse matrix with an open porosity of more than 60%. Peculiarities of the influence of the “Portland cement – aluminosilicate – complex of modifiers” system on the rheology of the concrete mixture was identified, which can significantly reduce shear stress and create easily formed cellular concrete mixtures. The increased activity and granulometry of aluminosilicates predetermine an increase in the number of contacts and mechanical adhesion between particles during compaction, strengthening the frame of inter-pore septa. The mechanism of the influence of the composition of the concrete mixture on the microstructure of the composite is established. The presence of refined aluminosilicates and a complex of additives in the system along with cement contribute to the synthesis of the matrix with open porosity, thereby increasing the sound absorption coefficient.

Estimation and experimental test of the sound-absorption coefficient of a pin-holder structure (Case of sound waves incidence upon the side surfaces of a group of cylinders)

2021 ◽  
Vol 263 (3) ◽  
pp. 3714-3719
Author(s):  
Takamasa Sato ◽  
Shuichi Sakamoto ◽  
Isami Nitta ◽  
Shunsuke Unai ◽  
Takunari Isobe ◽  
...  
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Propagation Constant ◽  
Characteristic Impedance ◽  
Physical Property ◽  
Sound Absorption Coefficient ◽  
Accurate Estimation ◽  
Sound Waves ◽  
Acoustic Characteristics ◽  
Measuring Tube

In this study, we conducted theoretical analyses and experiments related to the acoustic characteristics of the situation where sound waves are incident upon the side surfaces of a group of cylinders forming a pin-holder structure. The sound-absorption coefficient, entering its clearance between cylinders through the geometrical dimension of the clearance or the physical property of gas, was calculated. In the analytical model, the gap part of the pin-holder structure was divided into elements and approximated as a gap surrounded by two parallel planes. The characteristic impedance and propagation constant of the approximate gap were obtained and treated as one-dimensional transfer matrices; the sound-absorption coefficient was then calculated using the transfer-matrix method. The calculated value was compared to that obtained in an experiment with a sample prepared using a 3D printer; the sound-absorption coefficient was measured using a 2-microphone impedance-measuring tube. We attempted to make a simple yet accurate estimation of sound-absorption coefficient using these procedures. Our theoretical values displayed a similar tendency to that obtained by experiment.

Broadening of the Sound Absorption Bandwidth of the Perforated Panel Using a Membrane-Type Resonator

2018 ◽  
Vol 140 (3) ◽  
Author(s):  
Xuezhi Zhu ◽  
Zhaobo Chen ◽  
Yinghou Jiao ◽  
Yanpeng Wang
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Degrees Of Freedom ◽  
Low Frequency ◽  
Absorption Capacity ◽  
Sound Absorption Coefficient ◽  
Sound Waves ◽  
Frequency Range ◽  
Absorption Bandwidth ◽  
Membrane Type

In order to broaden the sound absorption bandwidth of a perforated panel in the low frequency range, a lightweight membrane-type resonator is installed in the back cavity of the perforated panel to combine into a compound sound absorber (CSA). Because of the great flexibility, the membrane-type resonator can be vibrated easily by the incident sound waves passing through the holes of the perforated panel. In the low frequency range, the membrane-type resonator and the perforated panel constitute a two degrees-of-freedom (DOF)-resonant type sound absorption system, which generates two sound absorption peaks. By tuning the parameters of the membrane type resonator, a wide frequency band having a large sound absorption coefficient can be obtained. In this paper, the sound absorption coefficient of CSA is derived analytically by combining the vibration equation of the membrane-type resonator with the acoustic impedance equation of the perforated panel. The influences of the parameters of the membrane-type resonator on the sound absorption performance of the CSA are numerically analyzed. Finally, the wide band sound absorption capacity of the CSA is validated by the experimental test.

scholarly journals A Composite Perforated Partitioned Sandwich Panel With Corrugation for Underwater Low-Frequency Sound Absorption

2021 ◽  
Vol 7 ◽  
Author(s):  
Junyi Wang ◽  
Jiaming Hu ◽  
Yun Chen
Keyword(s):  
Acoustic Wave ◽  
Composite Structure ◽  
Sound Absorption ◽  
Low Frequency ◽  
Propagation Loss ◽  
Sound Waves ◽  
Acoustic Metamaterials ◽  
Underwater Sound ◽  
Underwater Acoustic ◽  
Frequency Sound

Underwater acoustic wave absorption and control play an important role in underwater applications. Various types of underwater acoustic metamaterials have been proposed in recent years with the vigorous development of acoustic metamaterials. Compared with airborne sound, underwater sound waves have a longer wavelength and much smaller propagation loss, making them more difficult to control. In addition, given that the acoustic impedance of water is much greater than that of air, numerous conventional materials and structures are not suited to underwater use. In this paper, we propose a composite structure based on an excellent broadband low-frequency sound absorber of air using aluminum mixed with rubber. Our composite structure possesses broadband low-frequency (<1,000 Hz) sound absorption underwater, omnidirectional high sound absorption coefficient under the oblique incidence (0–75°), and pressure resistance. It has promising applications for underwater acoustic wave control and contributes to the design of underwater acoustic metamaterials.

scholarly journals Acoustical Properties of Electrospun Nanofibers for Aircraft Interior Noise Reduction

2009 ◽  
Author(s):  
R. Asmatulu ◽  
W. Khan ◽  
M. B. Yildirim
Keyword(s):  
Sound Absorption ◽  
Function Method ◽  
Electrospun Nanofibers ◽  
Separation Distance ◽  
Test Results ◽  
Sound Waves ◽  
Pump Speed ◽  
Acoustical Properties ◽  
Transfer Function Method ◽  
Electrospinning Method

Electrospun micro and nanofibers produced via electrospinning method were used for the sound absorption purposes. Polymers were initially dissolved in dimethyleformamide (DMF) or ethanol with a ratio of 80:20 and electrospun at 20 kV, 20 cm separation distance and 3 ml/hrs pump speed. The two-microphone transfer function method of the B&K impedance tube was used to determine the acoustical properties of the manufactured nanofibers at various frequencies. The test results showed that the absorption coefficients of nanofibers (∼500 nm) drastically increased. The reason behind this phenomenon may be attributed to the higher surface area of nanofibers and their interactions with more sound waves/air molecules. This result may open up new possibilities for the sound absorption problems in many fields, such as aircrafts, other transportation vehicles and infrastructures.

The Analysis of Acoustic Characteristics and Sound Absorption Coefficient of Needle Punched Nonwoven Fabrics

2014 ◽  
Vol 9 (2) ◽  
pp. 155892501400900 ◽  
Author(s):  
Fereshteh Shahani ◽  
Parham Soltani ◽  
Mohammad Zarrebini
Keyword(s):  
Sound Absorption ◽  
Surface Effect ◽  
High Volume ◽  
Areal Density ◽  
Work Place ◽  
Related Phenomenon ◽  
Sound Waves ◽  
Acoustic Characteristics ◽  
Textile Materials ◽  
Nonwoven Fabrics

Control of acoustical related phenomenon in environments, such as work place and residential homes, using various textile materials has gained paramount importance. Nonwoven fabrics in general are ideal acoustical insulator due to their high volume-to-mass ratio. This research examined acoustic characteristics of structured needle punched floor coverings in relation to fiber fineness, surface effect, punch density, areal density, and chemical bonding process. Sound absorption of the test samples was measured using the impedance tube method. Results indicate that fabrics produced from finer fibers absorb sound waves more efficiently. It was found that, samples with no surface effect enjoy the maximum sound absorption. This is followed by velour and cord surface effect samples. It was established that, higher levels of punch density and higher areal density caused the noise reduction coefficient (NRC) of the fabrics to be increased. It was also found that chemical finishing adversely affected the sound absorption property of the samples.

scholarly journals Angle-Dependent Absorption of Sound on Porous Materials

Acoustics ◽  
2020 ◽  
Vol 2 (4) ◽  
pp. 753-765
Author(s):  
Jose Cucharero ◽  
Tuomas Hänninen ◽  
Tapio Lokki
Keyword(s):  
Sound Absorption ◽  
Glass Wool ◽  
Room Acoustics ◽  
Sound Waves ◽  
Absorption Coefficients ◽  
Reverberation Chamber ◽  
Impedance Tube ◽  
Material Development ◽  
Dependent Absorption ◽  
Good Agreement

Sound-absorbing materials are usually measured in a reverberation chamber (diffuse field condition) or in an impedance tube (normal sound incidence). In this paper, we show how angle-dependent absorption coefficients could be measured in a factory-type setting. The results confirm that the materials have different attenuation behavior to sound waves coming from different directions. Furthermore, the results are in good agreement with sound absorption coefficients measured for comparison in a reverberation room and in an impedance tube. In addition, we introduce a biofiber-based material that has similar sound absorption characteristics to glass-wool. The angle-dependent absorption coefficients are important information in material development and in room acoustics modeling.

Advanced Procedure Used for Determining the Absorption Coefficient of Sonic-Absorbent Materials

2011 ◽  
Author(s):  
Petru A. Pop ◽  
Patricia A. Ungur ◽  
Liviu Lazar ◽  
Florin M. Marcu
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Indoor Environmental Quality ◽  
Sound Waves ◽  
Frequency Range ◽  
Entire Frequency Range ◽  
Acoustical Properties ◽  
Standing Wave Method ◽  
Gypsum Plaster ◽  
The Impact

Solving the acoustical problem and improving the impact indoor environmental quality represents a priority for many researchers and manufacturers of materials with a high noise reduction of coefficient rating. The paper presents a real solution for determination the sound-absorption coefficient of materials with acoustical properties from the gypsum family. The procedure used for test is standing wave method into a Kundt tube. The experiment setup used a complex installation of a Kundt tube containing a loudspeaker for emitting the sound waves at a well-defined frequency by a first PC, a microphone for detecting and transmitting the signal to a second PC for analyzing and processing the data. All of these were performed by using MATLAB Programs. Tests were conducted with two material samples with original receipts, one from gypsum and other from special gypsum plaster with sound-absorbent properties. The frequency was set separately for each material from 50 Hz to 1250 Hz to determine their sound-absorption coefficients. The result of experiments shows the efficiency of installation and superiority of special gypsum plaster vs. gypsum along entire frequency range of testing that can be carrying on to other materials with sound properties.

Sign in / Sign up

Export Citation Format

Share Document